Detecting your location...
Equipment

Filtering Wine

There are two reasons to filter wine: aesthetics and microbial stability. On the aesthetic side, filtration can make a wine more polished both in the glass and in the mouth; often creating a rounding effect that softens the wine’s edges. If your wine is sound with no flaws, then you can decide if you want to further shape your wine by filtering it. However, if you have residual sugar or Malic acid left in the wine, or there was a problem with Acetobacter or Brettanomyces during the ageing/storage period, then filtration is no longer an artistic decision; it becomes the only way to guarantee microbial stability for the wine.

How Filtration Works:
Pore sizes of filters are measured in microns. Typical winemaking sizes are 5, 3, 2, 1, and .45 micron media. The smaller the holes, the “tighter” the filter is said to be. Filtration’s guarantee of microbial stability comes from the fact that the pore size of filters can be made smaller than the actual yeast and microbes themselves. As the wine passes through the filter the larger microbes become stuck and are removed from the wine. Note: 2-micron filters are used to remove yeast, and .45-microns are needed to remove bacteria.

"Absolute" & "Nominal":
Filters are rated as being “Nominal” or “Absolute”. A nominal filter will remove most particles that are equal or greater than the rated micron size. An absolute filter will remove all particles larger than the micron rating.

If you are filtering a small amount of wine we recommend our round plate wine filter. If you are already using an enolmatic bottle filler to bottle your wine you might check out inline filter for that system that allows you to filter as you bottle. For larger volumes of 30 plus gallons you will probably want to look at our higher volume plate filters for filtering your wine.

How to size a Wine Filter
Sizing a wine filter for your winery is the first step on the road to enhanced stability and clarity in the wines you produce. The basic idea behind sizing a wine filter is to be able to filter the largest single lot of wine that you are likely to produce without clogging the filter media and having to stop the filtration process – this will always lead to the loss of whatever wine you have in the filter body and the hoses leading to and from the filter.

A good rule of thumb for 20x20cm filters is that you will be able to run between 10 and 15 gallons of wine per pad in the filter. So, a 10 plate wine filter will run between 100 and 150 gallons before clogging, provided that the wine is well settled and/or has been filtered already through a rougher pad. Again, this is a general rule and it is very important to understand that a wide range of factors can influence this. That said, this general rule of thumb tends to hold pretty true.
More information on fining and filtering wine can be found in our Red Winemaking and White Winemaking manuals.

Read more

Shop By Collection
Filters, Parts & Accessories

Filters, Parts & Accessories
Wine Filters

Wine Filters
100 products

Filter

Show previous products

  • Enolmatic/Enolmaster Filter (5 Micron) Enolmatic/Enolmaster Filter (5 Micron)

    Reusable Filter Cartridge | 5 Micron | Absolute Rated | Enolmatic | Enolmaster

    1 review

    Use with the Enolmatic filter. These filter cartridges can be cleaned and re-sanitized for future useage. Wash by running PBW (CL25) followed by a hot then a cold rinse. Re-sanitize immediately after washing and then again just prior to the next use with SaniClean (CL27). Absolute Rated

    Read more

    $93.99

  • Enolmatic Inline Filter Housing

    Inline Filter Housing | Enolmatic | Enolmaster

    4 reviews

    Use in conjunction with an Enolmatic or Enolmaster filler to filter wine inline as you are bottling. Saves time by eliminating a separate step and allows you to filter without using a pump or exposing your wine to oxygen. This filter unit is placed inline between the product and the filler itself. Filters are available in 5, 1 and .5 micron ratings. The filter cartridges used with this housing can be cleaned and re-sanitized for future useage. Wash by running PBW (CL25) followed by a hot then a cold rinse. Re-sanitize immediately after washing and then again just prior to the next use with SaniClean (CL27).

    Read more

    $186.99

  • Female Threaded Spindle Collar for 20x20 Plate Filters Female Threaded Spindle Collar for 20x20 Plate Filters

    Spindle Collar for 20x20 Plate Filter

    1 review

    Replacement female threaded brass piece which mounts into the fixed stainless plate (non-pump side) on an OMAC 20x20 plate and frame filter. This is the part of the filter that the spindle threads through in order to push the floating plate inward and close the filter once the pads have been installed. They occasionally strip out due to the force applied when sealing the filter for operation.

    Read more

    $79.99

  • Replacement Foot (leg cap) for Buon Vino Super Jet Filter Replacement Foot (leg cap) for Buon Vino Super Jet Filter

    Replacement Foot for Buon Vino Super Jet Filter

    Replacement foot for the Buon Vino Super Jet Filter (FIL10)

    Read more

    $4.39

  • Filter Sheets - Filtrox Versafix XE 104 - 20 cm x 20 cm - PLACEHOLDER

    Filtrox Filter Sheets | 20 cm x 20 cm | 0.7 Micron

    20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 0.7 micron pads are for ultra-fine polishing of the wine, or for preparing hard to filter wines to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets

    Read more

    $43.99

  • Wine Filtering Package - Rebuilt Kegs

    Filtering Wine Package - Rebuilt Kegs

    The best way to filter wine at home! Push wine from one keg through a plate filter and into another keg. No pumping, no oxidation, and total control over flow rates. The system can be expanded as needed by adding kegs or additional filter housings. All materials that come in contact with the wine are either stainless steel or food-grade, FDA-approved plastic or rubber. Kegs can be used for wine storage, and the gas system can be used anywhere a blanket of inert gas is needed. Complete filtering system includes one Nitrogen tank, dual gauge Nitrogen regulator, gas line assembly, two 5.5 gallon kegs and our FIL45B Wine & Beer Plate Filtering Kit. The kit includes a set of FIL46 Rough Filter Sheets. Additional sheets and sheets in other micron ratings can be selected from the You Might Also Need section below. Please Note:The Nitrogen tank is shipped empty and will need to be filled at your local welding supply shop. This kit will come with refurbished or converted Ball Lock Kegs

    Read more

    $379.99

  • Filter Sheets - Seitz K250 40 cm x 40 cm (2-3 Micron) 100 Sheets

    Seitz Filter Sheets | 40 cm x 40 cm | 2-3 Micron | 100 Sheets

    40cm x 40cm filter pads made for 40x40 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Seitz K250 40cm x 40cm 2-3 Micron  

    Read more

    $384.99

  • Super Jet Replacement - Concave Metal Plate Super Jet Replacement - Concave Metal Plate

    Super Jet Replacement - Concave Metal Plate

    Replacement metal plate for Buon Vino Super Jet filter.

    Read more

    $39.99

  • Pressurized 3.5 Gallon Tank for Plate Filter (FIL45) Pressurized 3.5 Gallon Tank for Plate Filter (FIL45)

    Pressurizable 3.5 Gallon Tank for Beer & Wine Plate Filter

    A great accessory for the FIL45 Plate Filter. Use pressure to push beer/wine through the plate filter rather than gravity alone. Comes with a funnel top and stable base maintaining an excellent balance. Please refer to the manual below for complete instructions. BPA Free Made from high density polyethylene Max Temp Rating: 167°F (75°C) Includes 35" length of 5/16" ID x 7/16" OD tubing. Plate filter not included.  

    Read more

    $49.99

  • Filter Sheets - Filtrox Versafix XE 34 - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 6 Micron

    40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 6 micron pads are considered to be a "rough" filtration and are typically used to prepare the beverage to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Versafix XE 34 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22-36 psi (1.5-2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 13-15 gal/hr (48-56 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    Read more

    $89.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 130 - 16 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Fibradisc AF 130 - 16 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 16" | 0.45 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings 0.45 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Fibradisc AF 130 Filter Module Wine Use: General sterile filtration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration Max. Recommended Flow Rate: 334  gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 114 gal/hr (432 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar) Please Note: The filter module, lacking a PES layer, is for clarification purposes only and does not provide sterile filtration for 100% bacteria removal.

    Read more

    $439.99

  • Filter Sheets - Filtrox Fibrafix AF 130 - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 0.5 Micron

    40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 0.5 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. Pads rated 0.5 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria - only a cartridge filter can do so. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Fibrafix AF 130 Filter Sheets Wine Use: General sterile filtration Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration of fruit juice Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 5 gal/hr (19 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar)

    Read more

    $149.99

  • 3/4 in Barb Quick Disconnects (QD) - For Flojet 4000 Pump

    3/4 in Barb Quick Disconnect (QD) - For Flojet 4000 Pump

    1 review

    Quick disconnect barb set (2 pieces) for 4.9 GPM Flojet pump.

    Read more

    $6.59

  • Lenticular Filter Module - Filtrox Versadisc XE 64 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 64 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 2 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 64 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 71 gal/hr (270 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    Read more

    $224.99

  • Lenticular Filter Module - Filtrox Versadisc XE 64 - 16 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 64 - 16 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 16" | 2 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 64 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    Read more

    $354.99

  • Filter Sheets - Filtrox Versafix XE 24 - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 10 Micron

    Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.     40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 10 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 10 micron pads are considered to be a "rough" filtration and are typically used to prepare the beverage to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Versafix XE 24 Filter Sheets Wine Use: Prefiltration Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 21-30 gal/hr (80-112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    Read more

    $82.99

  • Filter Sheets - Filtrox Versafix XE 104 - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 0.7 Micron

    40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 0.7 Micron for ultra-fine polishing of beverages or for preparing hard to filter beverages to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 0.7 micron pads are for ultra-fine polishing of the beverage, or for preparing hard to filter beverages to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets Wine Use: Ultra-fine polishing Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Cold Brew Coffee Use: Very fine filtration Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    Read more

    $107.99

  • EnoItalia Reversing Plate for 40 Plate Filters EnoItalia Reversing Plate for 40 Plate Filters

    Reversing Plate for EnoItalia 20x20 Wine Plate Filters

    Reversing Plate kit for EnoItalia 20x20 Wine Plate Filters.  

    Read more

    $274.99

  • 40x40 cm End Plate - Noryl

    40x40 Noryl End Plate

    Replacement End Plate for your 40x40cm Plate & Frame filter.  

    Read more

    $251.99

  • Replacement Check Valve - For Flojet 4000 Pump

    Replacement Check Valve - For Flojet 4000 Pump

    Replacement check valve and installation instructions for 4.9 GPM Flojet pump.

    Read more

    $47.49

  • Filter Sheets - Filtrox Versafix XE 44 - 40 cm x 40 cm - PLACEHOLDER

    Filtrox Filter Sheets | 40 cm x 40 cm | 4 Micron

    40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 4 Micron rating are for general polishing of beverages that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 4 micron pads are for general polishing of beverages that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Versafix XE 44 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22-36 psi (1.5-2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 8.5 gal/hr (32 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

    Read more

    $99.99

  • Kit for Double Filtration (20X20)

    Double Filtration Kit for Marchisio Wine Plate Filter | Noryl Plates | 20x20

    Installs in one of our 20x20 wine plate filter units to allow you to change pore size of your pads halfway through the filter. For example, turn a 20 plate filter into two 10 plate filters for sequential rough (7 micron) then polish (3 micron) filtrations in one unit. Fits all of our 20cm x 20cm plate filters. Includes stainless plate and 2 black noryl end plates that install on each side of the stainless plate.

    Read more

    $299.99

  • Wine Plate Filter W/ Noryl Plates (20x20) - 20 Plates

    Marchisio Wine Plate Filter | Noryl Plates | 20x20 | 20 Plate | Stainless Rolling Cart | 600L/h | 110V

    2 reviews

    Rolling cart wine plate filter Plates made from food-grade Noryl Built-in stainless centrifugal pump Built-in pressure gauge 1.5" tri-clamp inlet/outlet 600L/h wine filtering capacity Made in Italy by Marchisio Small commercial plate filter that will accomodate 20 20cm x 20cm plates. Included 110v 1/2hp, stainless motor will pump wine from your container and push it through the filter and into your aging tank or bottle filler. Features: 304 Stainless Steel Construction Four Casters for easy movement. Two of the casters have locks Built-in centrifugal stainess steel pump with on/off switch 21 Food-Grade Noryl plastic plates included.  Double filtration kit available Built-in pressure gauge Maximum pump pressure is 2.5 bar (35 p.s.i.) Up to 600L (158 gal) Flow rate per hour 620x420x560mm/24x16.5x22 inches 90 lbs 1.5" Tri-Clamp inlet and outlet Pads should be placed in the machine rough-smooth-smooth-rough  

    Read more

    $3,269.99

  • EnoItalia Bench Top Plate Filter - 10 Plate - 110V

    EnoItalia Wine Plate Filter | 20x20 | 10 Plate | Benchtop Plate Filter | 280L/h | 110V

    Benchtop plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 280L/h wine filtering capacity Made in Italy by EnoItalia Benchtop style wine plate filter made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 centrifugal pump. Features: Stainless ball valve Stainless sample tap Pressure gauge Wine Capacity: 130-280 L/h (34-73 gal/h) Oil Capacity: 130 L/h (34 gal/h) Dimensions: 23.6" L x 12.9" W x 17.3" H Weight: 64 lbs 110V  

    Read more

    $1,189.99

  • Lenticular Filter Module - Filtrox Versadisc XE 44 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 44 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 4 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 4 Micron rating are for general clarifying of beverages that do not need to be sterile filtered Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 44 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 95 gal/hr (360 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

    Read more

    $239.99

  • Lenticular Filter Module - Filtrox Versadisc XE 34 - 16 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 34 - 16 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 16" | 6 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 34 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 286 - 334 gal/hr (1,080 - 1,260 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    Read more

    $309.99

  • Lenticular Filter Module - Filtrox Versadisc XE 104 - 16 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 104 - 16 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 16" | 0.7 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 104 Filter Module Wine Use: Sterile filtration dry wine Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 - 22 psi (1.2 - 1.5 Bar) Cold Brew Coffee Use: Very fine, sterile filtration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    Read more

    $349.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 130 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Fibradisc AF 130 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 0.45 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 0.45 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Fibradisc AF 130 Filter Module Wine Use: General sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 57 gal/hr (216 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar) Please Note: The filter module, lacking a PES layer, is for clarification purposes only and does not provide sterile filtration for 100% bacteria removal.

    Read more

    $324.99

  • BevBright 20 Plate Filter, 40x40, 1.5" T.C. with Butterfly Valves and Double Filtration BevBright 20 Plate Filter, 40x40, 1.5" T.C. with Butterfly Valves and Double Filtration

    BevBright® Plate Filter | Noryl Plates | 40x40 | 20 Plate | Double Filtration Plate | Stainless Rolling Cart | 2,000L/h

    Rolling cart plate filter for wine, beer, cider, and distilling Plates made of high temperature Noryl plastic capable of being steam sterilized Double filtration kit included as standard Built-in pressure gauges, sight glasses, and sample valves 1.5" tri-clamp inlet/outlet w/ butterfly valves (20) 40cm x 40cm plates 2,000L/h filtering capacity The BevBright commercial plate filter features external stainless steel piping with built-in pressure gauges, sight glasses, and sample valves. Easily connect hoses to the included 1.5" tri-clamp butterfly valves. Double filtration kit comes standard. Features: 304 Stainless Steel Construction Up to 2,000L (528 gal) flow rate per hour Rolling casters for easy movement Drip collection tray 20 plates included Double filtration kit included (2) Built-in pressure gauges, sight glasses, and sample valves 1.5" Tri-Clamp inlet and outlet 47.5" x 26" x 35.5" 363 lbs Pads should be placed in the machine rough-smooth-smooth-rough CE compliant Please note: This unit comes with white plates rather than black plates as seen in the example photo. Updated images coming soon.

    Read more

    $6,995.00

  • BevBright 40 Plate Filter, 40x40, 1.5" T.C. with Butterfly Valves and Double Filtration

    BevBright® Plate Filter | Noryl Plates | 40x40 | 40 Plate | Double Filtration Plate | Stainless Rolling Cart | 4,000L/h

    Rolling cart plate filter for wine, beer, cider, and distilling Plates made of high temperature Noryl plastic capable of being steam sterilized Double filtration kit included as standard Built-in pressure gauges, sight glasses, and sample valves 1.5" tri-clamp inlet/outlet w/ butterfly valves (40) 40cm x 40cm plates 4,000L/h filtering capacity The BevBright commercial plate filter features external stainless steel piping with built-in pressure gauges, sight glasses, and sample valves. Easily connect hoses to the included 1.5" tri-clamp butterfly valves. Double filtration kit comes standard. Features: 304 Stainless Steel Construction Up to 4,000L (1,056 gal) flow rate per hour Rolling casters for easy movement Drip collection tray 40 plates included Double filtration kit included (2) Built-in pressure gauges, sight glasses, and sample valves 1.5" Tri-Clamp inlet and outlet 67.7" x 26" x  x 35.5" 518 lbs Pads should be placed in the machine rough-smooth-smooth-rough CE Compliant Please note: This unit comes with white plates rather than black plates as seen in the example photo. Updated images coming soon. Warning: You will need to remove the unit from the shipping pallet using a forklift and straps. Do not use a fork lift to directly lift from the bottom of the unit. Doing so may damage the bottom tray.

    Read more

    $7,499.00

  • EnoItalia Plate Filter - 20 Plate - Trolley Style w/ Pump

    EnoItalia Wine Plate Filter | 20x20 | 20 Plate | Stainless Rolling Cart | 900L/h | 220V Single Phase

    Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 900L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (20 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Wired with European-style 2-prong plug* Wine Capacity: 600-900 L/h (158-237 gal/h) Oil Capacity: 600 L/h (158 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 79 lbs *You will need a certified electrician to re-wire the unit with the appropriate 220V plug.  

    Read more

    $1,759.99

  • EnoItalia Plate Filter - 10 Plate - Trolley Style w/ Pump EnoItalia Plate Filter - 10 Plate - Trolley Style w/ Pump

    EnoItalia Wine Plate Filter | 20x20 | 10 Plate | Stainless Rolling Cart | 280L/h | 220V Single Phase

    Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 280L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Wired with European-style 2-prong plug* Wine Capacity: 130-280 L/h (34-73 gal/h) Oil Capacity: 130 L/h (34 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 70.5 lbs *You will need a certified electrician to re-wire the unit with the appropriate 220V plug. 20 Plate unit pictured.  

    Read more

    $1,644.99

  • EnoItalia Plate Filter - 40 Plate - Trolley Style w/ Pump EnoItalia Plate Filter - 40 Plate - Trolley Style w/ Pump

    EnoItalia Wine Plate Filter | 20x20 | 40 Plate | Stainless Rolling Cart | 1,500L/h | 220V Single Phase

    Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in EURO 20 centrifugal pump Stainless ball valve and sample tap 1,500L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (40 plates). Includes EURO 20 flexible impeller pump. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Wired with European-style 2-prong plug* Wine Capacity: 900-1500 L/h (237-396 gal/h) Oil Capacity: 900 L/h (237 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 108 lbs *You will need a certified electrician to re-wire the unit with the appropriate 220V plug. 20 Plate unit pictured.  

    Read more

    $2,309.99

  • EnoItalia Bench Top Plate Filter - 10 Plate

    EnoItalia Wine Plate Filter | 20x20 | 10 Plate | Benchtop Plate Filter | 280L/h | 220V Single Phase

    Benchtop plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 280L/h wine filtering capacity Made in Italy by EnoItalia Benchtop style wine plate filter made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 centrifugal pump. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug Wine Capacity: 130-280 L/h (34-73 gal/h) Oil Capacity: 130 L/h (34 gal/h) Dimensions: 23.6" L x 12.9" W x 17.3" H Weight: 64 lbs Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

    Read more

    $1,184.99

  • EnoItalia Plate Filter - 40 Plate - Trolley Style w/ Pump - 110V EnoItalia Plate Filter - 40 Plate - Trolley Style w/ Pump - 110V

    EnoItalia Wine Plate Filter | 20x20 | 40 Plate | Stainless Rolling Cart | 1,500L/h | 110V

    Coming soon! The 40-Plate 20x20 Plate Filter is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is August 2026. Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in EURO 20 centrifugal pump Stainless ball valve and sample tap 1,500L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (40 plates). Includes EURO 20 flexible impeller pump. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge Wine Capacity: 900-1500 L/h (237-396 gal/h) Oil Capacity: 900 L/h (237 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 108 lbs 110V  

    Read more

    $2,479.99

  • EnoItalia Plate Filter - 10 Plate - Trolley Style w/ Pump - 110V EnoItalia Plate Filter - 10 Plate - Trolley Style w/ Pump - 110V

    EnoItalia Wine Plate Filter | 20x20 | 10 Plate | Stainless Rolling Cart | 280L/h | 110V

    Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 280L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge Wine Capacity: 130-280 L/h (34-73 gal/h) Oil Capacity: 130 L/h (34 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 70.5 lbs 110V  

    Read more

    $1,729.99

  • EnoItalia Plate Filter - 20 Plate - Trolley Style w/ Pump - 110V EnoItalia Plate Filter - 20 Plate - Trolley Style w/ Pump - 110V

    EnoItalia Wine Plate Filter | 20x20 | 20 Plate | Stainless Rolling Cart | 900L/h | 110V

    Coming soon! The 20-Plate 20x20 Plate Filter is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is July 2026. Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 900L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (20 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge Wine Capacity: 600-900 L/h (158-237 gal/h) Oil Capacity: 600 L/h (158 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 79 lbs 110V  

    Read more

    $1,789.99

  • 40x40 Noryl Filter Plates

    40x40 Noryl Filter Plates

    Noryl plates, 40cm x 40cm for adding to middle of filter. 2 gaskets are included and installed on each plate. Usually used to add plates to one of the 40x40 filters we sell. Each filter lists the maximum number of plates it will accept. Made from heat resistant Noryl plastic, allowing you sterilize with steam if you choose.

    Read more

    $139.99

  • Lenticular Filter Module - Filtrox Versadisc XE 24 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 24 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 10 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 24 Filter Module Wine Use: Prefiltration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 239 - 334 gal/hr (900 - 1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    Read more

    $224.99

  • Lenticular Filter Module - Filtrox Versadisc XE 34 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 34 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 6 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 34 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 143 - 167 gal/hr (540 - 630 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    Read more

    $224.99

  • Lenticular Filter Module - Filtrox Versadisc XE 104 - 12 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 104 - 12 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 12" | 0.7 Micron

    12" filter module for use with 12" stainless steel lenticular filter housings 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 104 Filter Module Wine Use: Sterile filtration dry wine Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 - 22 psi (1.2 - 1.5 Bar) Cold Brew Coffee Use: Very fine, sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    Read more

    $239.99

  • Lenticular Filter Module - Filtrox Versadisc XE 24 - 16 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 24 - 16 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 16" | 10 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings 10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 24 Filter Module Wine Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 478 - 668 gal/hr (1,800 - 2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    Read more

    $299.99

  • Lenticular Filter Module - Filtrox Versadisc XE 44 - 16 in. / 16 lenses DOE/DOR Lenticular Filter Module - Filtrox Versadisc XE 44 - 16 in. / 16 lenses DOE/DOR

    Filtrox Lenticular Filter Module | 16" | 4 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings 4 Micron rating are for general clarifying of beverages that do not need to be sterile filtered Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 44 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 190 gal/hr (720 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

    Read more

    $299.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 21 Plus 2 - 16 in. / 16 lenses DOE Lenticular Filter Module - Filtrox Fibradisc AF 21 Plus 2 - 16 in. / 16 lenses DOE

    Filtrox Lenticular Filter Module | Back Flushable | 16" | 10 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 21 Plus2 Filter Module Wine Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 478 - 668 gal/hr (1,800 - 2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

    Read more

    $499.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 31 Plus 2 - 16 in. / 16 lenses DOE Lenticular Filter Module - Filtrox Fibradisc AF 31 Plus 2 - 16 in. / 16 lenses DOE

    Filtrox Lenticular Filter Module | Back Flushable | 16" | 8 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 8 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 5 - 12 Micron Mid Point: 8 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 31 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 286 - 334 gal/hr (1,080 - 1,260 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    Read more

    $499.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 41 Plus 2 - 16 in. / 16 lenses DOE Lenticular Filter Module - Filtrox Fibradisc AF 41 Plus 2 - 16 in. / 16 lenses DOE

    Filtrox Lenticular Filter Module | Back Flushable | 16" | 6 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 6 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 41 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 190 gal/hr (720 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

    Read more

    $499.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 71 Plus 2 - 16 in. / 16 lenses DOE Lenticular Filter Module - Filtrox Fibradisc AF 71 Plus 2 - 16 in. / 16 lenses DOE

    Filtrox Lenticular Filter Module | Back Flushable | 16" | 2 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 71 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

    Read more

    $499.99

  • Lenticular Filter Module - Filtrox Fibradisc AF 101 Plus 2 - 16 in. / 16 lenses DOE Lenticular Filter Module - Filtrox Fibradisc AF 101 Plus 2 - 16 in. / 16 lenses DOE

    Filtrox Lenticular Filter Module | Back Flushable | 16" | 1 Micron

    16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 1 Micron for fine filtration of wine, spirits, and beer Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 1.5 Micron Mid Point: 1 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 101 Plus2 Filter Module Wine Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 29 psi (1.5 - 2.0 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Very fine filtration, for long shelf life Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar)

    Read more

    $499.99

You have seen 96 out of 100 products

Show more products

Jump Back In

© 2026 MoreWine

    • American Express
    • Apple Pay
    • Bancontact
    • Diners Club
    • Discover
    • Google Pay
    • iDEAL Wero
    • Mastercard
    • Shop Pay
    • USDC
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account