Filtering Wine

Plastic 1/4" barb with 1/2" male thread. This is the same barb we use on our Beer and Wine Filter Kit (FIL40).

Read more less

20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 4 Micron rating are for general polishing of wines that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 4 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Versafix XE 44 Filter Sheets

Read more less

40cm x 40cm filter pads made for 40x40 plate filters. 9-10 micron pads are considered to be a "very rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 5-7 micron; or also to pre-filter white musts prior to fermentation. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering.

Read more less

Replacement End Plate for your 20x20cm Plate & Frame filter Pump side end plate pictured (WE912C). WE912D has nipple on one side, where WE912C is a flat circle on either side.

Read more less

The Enolmaster Tandem Professional Filter Housing is designed to operate in conjunction with the Enolmaster Bottle Filling Machine. Enolmaster Tandem helps you save time by filtering and bottling at the same time. Place the filters in the housing and attach the hoses, then open the bypass valve on top of the filter housing. Place the Tandem Filter Housing inline between the product and the Enolmaster Filler. The Enolmaster Filling Machine draws the product from your tank and will pull the liquid through your filter housing, into the bottle. Fast filtering and bottling, easy to use, preserves product quality, easy to clean. Holds 3 Filter Cartridges. Requires 3 Filter Cartridges of the same Micron for use. Includes tubing to connect to Enolmaster Filling Machine Alcohol tolerance up to 18% ABV Filter Cartridges sold separately and listed at the bottom of this page Easy to Use The Tandem professional filter housing in conjunction with the Enolmaster professional vacuum filler. The machine creates the vacuum inside the bottle by sucking the liquid from the main container. Then the liquid is easily filtered and bottled in a single operation. Preserves the Product The filtering system is designed to preserve the integrity of the product. The filtering cartridges retain only the unwanted particles without altering the organoleptic qualities of the product. Easy to Clean The Tandem professional filter housing is easily cleaned after each use. In this way you will always have maximum hygiene in the bottling process.   Please note: Recommended for use with wine and beer only. Use with spirits and liqueurs above 18% ABV may result in damage to the filter housing.

Read more less

20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 6 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker's tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Versafix XE 34 Filter Sheets

Read more less

Replacement female threaded brass piece which mounts into the fixed stainless plate (non-pump side) on an OMAC 20x20 plate and frame filter. This is the part of the filter that the spindle threads through in order to push the floating plate inward and close the filter once the pads have been installed. They occasionally strip out due to the force applied when sealing the filter for operation.

Read more less

Replacement foot for the Buon Vino Super Jet Filter (FIL10)

Read more less

20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 11 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 11 micron pads are considered to be a "rough" filtration and are typically used to prepare the wine to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on the winemaker's tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 5 - 18 Micron Mid Point: 11 Versafix XE 24 Filter Sheets

Read more less

40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 2 Micron rating are for general polishing of beverages that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 2 micron pads are for general polishing of beverages that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3.0 Micron Mid Point: 2 Versafix XE 64 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 6.5 gal/hr (24 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

A great accessory for the FIL45 Plate Filter. Use pressure to push beer/wine through the plate filter rather than gravity alone. Comes with a funnel top and stable base maintaining an excellent balance. Please refer to the manual below for complete instructions. BPA Free Made from high density polyethylene Max Temp Rating: 167°F (75°C) Includes 35" length of 5/16" ID x 7/16" OD tubing. Plate filter not included.  

Read more less

Replacement metal plate for Buon Vino Super Jet filter.

Read more less

40cm x 40cm filter pads made for 40x40 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering.

Read more less

Diaphragm Pump, self priming. 3/4" barbed fittings. Pump is not wired, it requires a plug and/or switch with cord to operate. 4.5 gpm. 140° F max temperature.

Read more less

Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 900L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (20 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Wired with European-style 2-prong plug* Wine Capacity: 600-900 L/h (158-237 gal/h) Oil Capacity: 600 L/h (158 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 79 lbs *You will need a certified electrician to re-wire the unit with the appropriate 220V plug.  

Read more less

20 cm x 20 cm filter pads fit all standard 20x20 plate filters, which are typically used by home winemakers 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 20cm x 20cm filter pads made for 20x20 plate filters. 0.7 micron pads are for ultra-fine polishing of the wine, or for preparing hard to filter wines to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets

Read more less

Benchtop plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 280L/h wine filtering capacity Made in Italy by EnoItalia Benchtop style wine plate filter made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 centrifugal pump. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug Wine Capacity: 130-280 L/h (34-73 gal/h) Oil Capacity: 130 L/h (34 gal/h) Dimensions: 23.6" L x 12.9" W x 17.3" H Weight: 64 lbs Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Quick disconnect barb set (2 pieces) for 4.9 GPM Flojet pump.

Read more less

Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 1,500L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (40 plates). Includes EURO 20 flexible impeller pump. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Wired with European-style 2-prong plug* Wine Capacity: 900-1500 L/h (237-396 gal/h) Oil Capacity: 900 L/h (237 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 108 lbs *You will need a certified electrician to re-wire the unit with the appropriate 220V plug. 20 Plate unit pictured.  

Read more less

Reversing Plate kit for EnoItalia 20x20 Wine Plate Filters.  

Read more less

Replacement End Plate for your 40x40cm Plate & Frame filter.  

Read more less

Replacement check valve and installation instructions for 4.9 GPM Flojet pump.

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 64 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 71 gal/hr (270 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less