Filtering Wine

40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 6 micron pads are considered to be a "rough" filtration and are typically used to prepare the beverage to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Versafix XE 34 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22-36 psi (1.5-2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 13-15 gal/hr (48-56 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 0.5 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. Pads rated 0.5 micron remove 99.999% of bacteria. This pad is the right choice when you want to promote sterility in the bottle, although do please note that the pad does not remove 100% of bacteria - only a cartridge filter can do so. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Fibrafix AF 130 Filter Sheets Wine Use: General sterile filtration Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration of fruit juice Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 5 gal/hr (19 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar)

Read more less

Rolling cart plate filter for wine or oil Plates made from food-grade PPA Built-in ENOS 20 centrifugal pump Stainless ball valve and sample tap 280L/h wine filtering capacity Made in Italy by EnoItalia Made from AISI 304 stainless steel with 20x20 food-grade PPA filter plates (10 plates). Includes ENOS 20 pump with stainless body and impeller. Mounted to trolley cart with rolling casters. Features: Stainless ball valve Stainless sample tap Pressure gauge 220V single phase Input Voltage Required Wired with European-style 2-prong plug* Wine Capacity: 130-280 L/h (34-73 gal/h) Oil Capacity: 130 L/h (34 gal/h) Pump Barbs: 20 mm (0.78") Dimensions: 23.6" L x 19.7" W x 29.5" H Weight: 70.5 lbs *You will need a certified electrician to re-wire the unit with the appropriate 220V plug. 20 Plate unit pictured.  

Read more less

40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 0.7 Micron for ultra-fine polishing of beverages or for preparing hard to filter beverages to go through a sterile cartridge filter Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 0.7 micron pads are for ultra-fine polishing of the beverage, or for preparing hard to filter beverages to go through a sterile cartridge filter. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Versafix XE 104 Filter Sheets Wine Use: Ultra-fine polishing Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Cold Brew Coffee Use: Very fine filtration Max. Recommended Flow Rate: 15 gal/hr (56 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

Noryl plates, 40cm x 40cm for adding to middle of filter. 2 gaskets are included and installed on each plate. Usually used to add plates to one of the 40x40 filters we sell. Each filter lists the maximum number of plates it will accept. Made from heat resistant Noryl plastic, allowing you sterilize with steam if you choose.

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 24 Filter Module Wine Use: Prefiltration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 239 - 334 gal/hr (900 - 1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 34 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 143 - 167 gal/hr (540 - 630 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 4 Micron rating are for general clarifying of beverages that do not need to be sterile filtered Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 44 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 286 gal/hr (1,080 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 239 gal/hr (900 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 95 gal/hr (360 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Versadisc XE 104 Filter Module Wine Use: Sterile filtration dry wine Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 - 22 psi (1.2 - 1.5 Bar) Cold Brew Coffee Use: Very fine, sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 24 Filter Module Wine Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 478 - 668 gal/hr (1,800 - 2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 6 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on wines with heavy sedimentation as the finer pads will clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 34 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 286 - 334 gal/hr (1,080 - 1,260 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 4 Micron rating are for general clarifying of beverages that do not need to be sterile filtered Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 44 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 190 gal/hr (720 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 64 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 0.7 Micron for ultra-fine polishing of wine or for preparing hard to filter wines to go through a sterile cartridge filter Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 0.8 Micron Mid Point: 0.7 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Versadisc XE 104 Filter Module Wine Use: Sterile filtration dry wine Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 - 22 psi (1.2 - 1.5 Bar) Cold Brew Coffee Use: Very fine, sterile filtration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

12" filter module for use with 12" stainless steel lenticular filter housings 0.45 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Filtration Area: 19.3 ft² (1.8 m²) Number of Lenses: 16 Fibradisc AF 130 Filter Module Wine Use: General sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration Max. Recommended Flow Rate: 167 gal/hr (630 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 57 gal/hr (216 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar) Please Note: The filter module, lacking a PES layer, is for clarification purposes only and does not provide sterile filtration for 100% bacteria removal.

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings 0.45 Micron pads remove 99.999% of bacteria to promote sterility in the bottle Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.4 - 0.6 Micron Mid Point: 0.5 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Fibradisc AF 130 Filter Module Wine Use: General sterile filtration Max. Recommended Flow Rate: 334 gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Fruit Wine or Fruit Juice Use: Cold sterile filtration Max. Recommended Flow Rate: 334  gal/hr (1,260 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar) Beer Use: Yeast and bacteria removal Max. Recommended Flow Rate: 114 gal/hr (432 L/hr) Max. Recommended Pressure Differential: 15 psi (1.0 Bar) Please Note: The filter module, lacking a PES layer, is for clarification purposes only and does not provide sterile filtration for 100% bacteria removal.

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 10 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 21 Plus2 Filter Module Wine Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 478 - 668 gal/hr (1,800 - 2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 8 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 5 - 12 Micron Mid Point: 8 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 31 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Clarifying filtration of beer, visually clear Max. Recommended Flow Rate: 286 - 334 gal/hr (1,080 - 1,260 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Cold Brew Coffee Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 6 Micron rating provides a rough filtration that removes large particulates, often followed by finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer modules may clog without prefiltering Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 4 - 9 Micron Mid Point: 6 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 41 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 36 psi (1.5 - 2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 190 gal/hr (720 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 2 Micron rating are for general clarifying of wine and fine filtration of beer, seltzer and cold brew Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 1.5 - 3 Micron Mid Point: 2 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 71 Plus2 Filter Module Wine Use: Clarifying filtration Max. Recommended Flow Rate: 572 gal/hr (2,160 L/hr) Max. Recommended Pressure Differential: 29 - 36 psi (2.0 - 2.5 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Fine filtration, with fewer yeast cells Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Seltzer Use: Fine filtration of seltzer base Max. Recommended Flow Rate: 668 gal/hr (2,520 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Cold Brew Coffee Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 29 psi (2.0 Bar)

Read more less

16" filter module for use with 16" stainless steel lenticular filter housings Back flushable module 1 Micron for fine filtration of wine, spirits, and beer Manufactured by Filtrox, the world's leading producer of high-quality filtration media Filtrox filter modules are high-performance filtration solutions designed for use with stainless steel lenticular filter housings. These modules deliver reliable, efficient filtration for a wide range of liquids in food and beverage production including wine, beer, cider, spirits, cold brew coffee, and more. Compared to plate filters and filter sheets, lenticular filter housings and filter modules offers an airtight, sealed system with no dripping or leakage, ensuring your liquid remains protected and uncontaminated.  Filter modules are easy to install and provide consistent results, making them ideal for demanding filtration applications. Filtrox Group is a producer of filter media for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter modules are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 0.5 - 1.5 Micron Mid Point: 1 Filtration Area: 38.7 ft² (3.6 m²) Number of Lenses: 16 Back Flushable Max. Backflow Pressure Differential: 7 psi (0.5 Bar) at 77°F (25°C) Fibradisc AF 101 Plus2 Filter Module Wine Use: Fine filtration Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 - 29 psi (1.5 - 2.0 Bar) Spirits Use: Fine filtration of cognac and whiskey chill haze removal Max. Recommended Flow Rate: 478 gal/hr (1,800 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar) Beer Use: Very fine filtration, for long shelf life Max. Recommended Flow Rate: 142 gal/hr (540 L/hr) Max. Recommended Pressure Differential: 17 psi (1.2 Bar)

Read more less

40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 10 Micron rating provides a rough filtration that removes large particulates, often followed by a finer filtration Rough filtration is necessary on beverages with heavy sedimentation as the finer pads will clog without prefiltering Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 10 micron pads are considered to be a "rough" filtration and are typically used to prepare the beverage to be filtered by finer pads, usually either 2-3 micron or 1.5 micron depending on tastes and objectives. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 6 - 15 Micron Mid Point: 10 Versafix XE 24 Filter Sheets Wine Use: Prefiltration Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Fruit Wine or Fruit Juice Use: Prefiltration Max. Recommended Flow Rate: 30 gal/hr (112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar) Spirits Use: Coarse filtration of liquors, spirits Max. Recommended Flow Rate: 21-30 gal/hr (80-112 L/hr) Max. Recommended Pressure Differential: 36 psi (2.5 Bar)

Read more less

40 cm x 40 cm filter pads fit all standard 40x40 plate filters, which are typically used in professional applications 4 Micron rating are for general polishing of beverages that do not need to be sterile filtered Easily sterilizable via heat or steam Manufactured by Filtrox, the world's leading producer of high-quality filtration media 40cm x 40cm filter pads made for 40x40 plate filters. 4 micron pads are for general polishing of beverages that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean solution through the pads followed by sterile water or a small amount of beverage that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Filtrox Group is a producer of filter sheets for applications in the food and beverage industry as well as in the pharmaceutical and chemical industry. These filter sheets are manufactured of specially selected raw materials and conform to FDA and FCC regulations. Micron Rating: 3 - 6 Micron Mid Point: 4 Versafix XE 44 Filter Sheets Wine Use: Clarifying filtration Max. Recommended Flow Rate: 26 gal/hr (96 L/hr) Max. Recommended Pressure Differential: 29-36 psi (2.0-2.5 Bar) Fruit Wine or Fruit Juice Use: Clarifying filtration Max. Recommended Flow Rate: 21 gal/hr (80 L/hr) Max. Recommended Pressure Differential: 22-36 psi (1.5-2.5 Bar) Beer Use: Middle fine filtration, with only a few yeast Max. Recommended Flow Rate: 8.5 gal/hr (32 L/hr) Max. Recommended Pressure Differential: 22 psi (1.5 Bar)

Read more less

Part #9 in attached plate filter instuctions.  

Read more less