Glass & Plastic Carboys

A small 1 gallon glass jar fermenter that is perfect for testing new things on a small scale or just fermenting a small batch of wine! Includes: 1 gallon glass jar Screw top lid with hole and airlock grommet S-Shaped airlock

Read more less

Plastic dust cap for all wide mouth demijohns

Read more less

The BrewBuilt Neoprene Carboy Sleeve works great for maintaining the internal temperature of your 5, 6, or 6.5 gallon glass carboy. Highly recommended for use with the BrewBuilt Carboy CoolStix. The added insulation will lower the amount of cycles needed to maintain fermentation temperatures and greatly assist in cold crashing. The sleeves are 6 mm thick with stitched piping on the edges for exceptional durability.   SKU Size Height (in.) Diameter (in.) FE329A 5 Gal 14.75 10.75 FE329B 6 Gal 17.25 10.90 FE329C 6.5 Gal 17.50 11.20  

Read more less

Made from BPA free PET, this 6 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. You will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Specifications (Not including spigot): Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.5 lbs Rated to 140 degrees F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free  

Read more less

Replacement lid for Farro Glass wide mouth glass carboys. Screw cap covers a 1" hole which will accept a #5 stopper for installing an airlock. Made from polypropylene.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after.  They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system.  Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning.  The Fermonster leaves all these problems behind! These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that.  The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Plastic dust cap for the 54L narrow mouth demijohn

Read more less

Made in Italy, these are premium glass carboys that are better than other carboys on the market because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This large 6.5 gallon size carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. This carboy has a smaller threaded neck than standard carboys, and requires a specific hood for use with racking, and fermenting. Our line of Itailan carboy is our top recommendation for glass carboys.    Specifications: Weight: 20.0 pounds each Dimensions: 21.0"h x 12.5"w x 12.5"d" Country of origin: Italy

Read more less

9 inch funnel with a flexible output hose designed to give you more, well, flexibility!  The adjustable outlet hose can be useful when working in tight spaces like your barrel room, or anywhere else that a bit more versatility could be helpful!

Read more less

Made from BPA free PET, this 3 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. You will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Specifications (Not including spigot): Uses a #10 stopper or a 5 Gallon Carboy Hood. Weighs 1.0 lbs Rated to 140 degrees Height: 16 inches Diameter: 9 inches Completely taste and odor free

Read more less

A small 1 gallon glass jar fermenter that is perfect for testing new things on a small scale or just fermenting a small batch of wine! This unit features a lug-finish glass jar with metal lid. Metal lids won't crack or break like plastic lids, and they provide a much better seal thanks to the thin foam liner underneath. Similar to mason jar lids, the metal lid will show signs of rust over time and need to be replaced, but this won't happen for some time with proper cleaning practices.  Includes: 1 gallon glass jar Screw top lid with hole and airlock grommet S-Shaped airlock

Read more less

The Ported Fermonster is a brand new fermenter designed specifically for fermentation. We gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The large 7 gallon size was designed to provide ample space for fermentation and you'll find the molded in volume markers super handy for accurate filling. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  The 7 gallon volume is a monster of a fermenter, reducing blowoff issues seen with standard 5 and 6 gallon carboys. Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Ported to allow a spigot Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5, 6, and 7 Gallons Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 20.9 inches Diameter: 11.3 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Made from BPA free PET, this 6 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. We recommend our plastic bucket spigot (FE347) and you will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Does not come with spigot.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after.  They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system.  Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning.  The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Glass carboys are fragile, and this is nothing like that.  The hefty plastic construction will hold up to brew day abuse. These fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Plastic dust cap for 34L narrow mouth demijohn

Read more less

Natural rubber hood for jubs and carboys. Features 3/8 inch hole for airlocks.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   The Catalyst represents the future of fermentation simplicity.  Easy to clean, transferless, this is a time-saving piece of equipment which you'll be surprised by the value of.  Boasting a rich set of features, the Catalyst Fermentation System was designed for homebrewers, while keeping true to many pro brewing principles.  Not only will the Catalyst Fermentation System save you time and energy, it will improve the quality of your beer! The 45° Conical Fermentation Tank is made of a BPA free Medical Grade material, Tritan, which can withstand dishwasher cleaning and is incredibly resistant to scratches or other damage.  The entire vessel is designed to withstand boiling temperatures, so wort can be transferred straight from your kettle to fermenter without cooling if necessary.  Thanks to the integrated dump valve, trub can be dumped, allowing for primary and secondary fermentations to take place in the same vessel.  This reduces transfers and touches, not only reducing oxygenation of your beer, but also reducing the chance of contamination.  Once fermentation is complete, you can bottle from the same system using the included tubing adapter for the dump valve. Conical design forces yeast & trub down to the integrated harvester, reducing contact with your beer and improving flavor.  Yeast harvesting is accomplished using the integrated oversized 3" Butterfly Dump Valve & commonly available mason jars.  When fermentation is complete, cleaning is even easier.  The Tritan material used for the conical resists buildup, and since the entire lid lifts off, cleaning the conical is as simple as a quick rinse & wipe down.  We've found the Catalyst to be a solid piece of equipment that does the job of many pieces of brewery equipment.  If you're looking for a fermenter that covers you from brew day to bottling, this is the unit for you! Features: 6.5 Gal capacity 45° Conical angle Oversized 3" buttefly dump valve Silicone Gasketed lid for perfect fermenter seal Uses common mason jars as yeast harvester All steps on the cold side of brewing in one vessel: Primary, Seconday, Yeast Harvesting, Bottling. Medical Grade BPA Free conical made of Tritan. Includes: 6.5 Gallon Tank with Lid Stand (Base, 2 Legs, 2 Support Beams, 8 Screws) 3” Proprietary Butterfly Valve Bottling Attachment Transfer Tubing Tubing Clamp Rubber Stopper 16 Oz. Wide Mouth Mason Jar Allen Wrench Perfect your Catalyst System with the Catalyst Tank Cover.  

Read more less

The Fermonster is a brand new fermenter designed specifically for fermentation. MoreBeer! gave product feedback for over 2 years of development and we think they nailed the design. The large lid allows for easy filling and makes hop or oak additions a breeze. The smooth sides are fantastic for sanitization - no ribs or texture to collect yeast or bacteria.  The 6 gallon size is great for most fermentations, and the larger 7 gallon is available for even bigger beers. The punted bottom allows sediment to collect to the sides so that you can siphon liquid from the center.  Because they are made from virgin PET plastic they nearly unbreakable and a lot safer than similar glass carboys. Also notice the conical top which reduces surface area if you plan to store beer or wine long term.   These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. Made from heavy PET plastic, the same material used in 2 L soda bottles, which is nearly impermeable to oxygen penetration.  Due to the thicknes of the material and the overall geometry the Fermonster does not require ribs or dimples for stability.  That results in a super smooth interior surface that reduces yeast and sediment buildup making it the easiest to clean, most sanitary PET carboy on the market.  The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside.  Fermonsters are easily moved by hand or consider using our Carboy Carrier for even greater ease of use. These fermentors are completely air-tight and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Volume Markers at 5 and 6 Gallons Punted bottom O-Ring and Lid with one hole is included Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 19.25 inches Diameter: 11.25 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Made from BPA free PET, this 3 gallon plastic carboy is a great fermenter for wine that won't affect the taste or smell of your wine. Makes a great secondary fermenter as well because of its negligable oxygen permeability. Cleaning is made easy by its straight smooth sides. This fermenter comes with a hole 2 inches from the bottom to allow you to install a spigot to make racking much easier. We recommend our plastic bucket spigot (FE347) and you will also need the spigot installation tool (FE311A) to install the spigot. When cleaning, do not use a carboy brush as the bristles will scratch platic carboys giving bacteria a place to hide and multiply. A #10 stopper fits well in the mouth of the carboy. Does not come with spigot.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after.  They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system.  Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning.  The Fermonster leaves all these problems behind! These Fermenters are ported but do not come with a spigot. FE347 is the plastic spigot we recommend along with this fermenter. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that.  The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring.  Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below.   Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Catalyst fermenter replacement lid gasket

Read more less

Collection ball for the 14 gallon FastFerment. Made from food grade HDPE and the volume is 40.6 oz (1200 ml)

Read more less