Carboy Accessories

For both carboys and buckets. In our opinion 3 piece airlocks are superior to the triple ripple type in that they can be taken apart and cleaned. However we do sell the triple ripple type (FE371) in case you are use to that type and would like to stay with it. Please Note: Stopper Not Included.

Read more less

An old traditional style of airlock that is still preferred by wine makers during an ML fermentation and for longer term aging. A 3 piece style airlock (FE370) is preferred for active primary fermentation of sugar because they can be easily cleaned when they get dirty. The S-Shaped is better for long term aging because the water in the airlock has less surface area and will not evaporate as quickly. They are preferred for ML fermentation because they will show positive pressure, an indication that your ML fermentation (which are very slow and hard to detect) is working. Please Note: Stopper Not Included.

Read more less

Clear glass marbles are a great choice for filling up volume in a small fermenter or oak barrel. Most of us have been in that situation where we have the ideal container we want to use to store our wine, but we just don't have quite enough wine. What are your choices? Either use several smaller containers, buy wine to top up, or try to purge the air space with inert gas. None of these are ideal solutions. Clear glass marbles, free of ink or contamination, are an ideal solution. Use just as much as you need to top up the vessel. When you transfer the wine out, remove your marbles, wash and reuse with your next batch (just don't lose them...) 3 lbs of marbles is enough to displace approximately 1 Liter of liquid. Specifications Count: Approximately 615 Net Weight: 3 lbs Marble Size: 12mm Color: Clear Volume Displaced: About 1.05Qts/1L

Read more less

This stopper will fit a 2.8,3,5,6, or 6.5 gallon glass carboy (please note: Will Not Fit a Better Bottle Or Plastic Carboys). Will also fit our 500ml Erlenmyer flask. Made with a longer taper from a different material, this stopper does not pop out when wet. Extremely reliable, it is our stopper of choice for all applications involving these size carboys. Also will fit a 12 or 22 oz beer bottle when used upside down.

Read more less

Plug the hole in other stoppers when moving or shaking the fermenter.

Read more less

For one handed lifting of empty Smooth Necked (not threads) glass carboys. Fits 3, 5, 6, 6.5 gallon smooth neck carboys.

Read more less

Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #10 size is recommended for PET carboys.

Read more less

A great way to drain your carboys without having to hold them upside down the entire time. These will drain the carboy, although not as well as our BE450 due to how close the mouth of the carboy is to the ground. Note that a carboy can fall out of the stand if left unattended, so please be careful when using this product. Carboys will not fit in this drainer if a carboy handle is on the carboy.

Read more less

Solid version of FE494. A new stopper that fits a 2.8,3,5,6, or 6.5 gallon glass carboy. (DOES NOT FIT BETTER BOTTLE OR PLASTIC CARBOYS) Also fits a 500ml Erlenmyer flask. Made with a longer taper from a different material, this stopper does not pop out when wet. Much more reliable, it quickly became our stopper of choice for all applications involving these size carboys.

Read more less

Rubber style with two attachments for vinyl blow off hoses (3/8 or 1/2''). For use with our 3, 5, 6, or 6.5 gallon glass carboys with smooth necks. Can also be used on 5 and 6 gallon plastic carboys TIP: Carboy hoods are exceptionally useful for blowoff tubes. Just add 3' of 1/2" racking tubing into a bucket of water as your airlock.

Read more less

The easy way to remove oak chips and cubes from your carboys! These stainless steel perforated tubes will hold 2 ounces of oak (chips or cubes), and can be lowered into the carboy. A small piece of plastic line is tied to the top stopper of the infusion tube, and will allow your carboy stopper to seal tightly while at the same time holding the plastic line securely against the mouth of the carboy. When it is time to remove your oak, grab a hold of the line, remove the stopper, and pull the Oak Infusion Tube out of your beer or wine! Made from stainless steel with silicone stoppers at either end for easy access to either side of the tube. 16" long. Fits carboys 5 gallons and up. Holds 2oz of cubes or chips.

Read more less

Keep your wine from oxidizing! This is one of the most prized possessions of our in-house wine maker. He uses Argon because of its high molecular weight, but CO2 will work. From extended macerations (he gasses before and after laying plastic wrap over the cap) to topping up storage tanks (he uses before setting the floating lid), this is a great way to make sure no excess oxygen is getting into your wine. This can also be used to purge any tank before filling with the wine. Designed to mate with an H550B Quick disconnect installed in the standing end of your 5/16" gas line (H550B and gas line not included).

Read more less

Keep your yeast or ML happy and your ferment warm during those cold winter months with this flexible heater made by Fermentap. Using tape to adhere, this flexible heating wrap can be attached directly to your fermenter or can be used to heat the space in a box (or refrigerator) that the fermenter is in. Depending on your configuration and insulation, you can increase the temperature of your wine from 5-20 degrees Fahrenheit. If using carboy or bucket you can attach directly using tape (as seen in photo above.) We recommend electrical tape as it sticks and unsticks the easiest. Heating can be contolled by sticking either the entire wrap or a portion of the wrap to the fermenter. In an open evironment we see a heating differential between carboy and ambient of 10-15 degrees. This differential can be increased by using our carboy bag to insulate a carboy (this has been tested.) To decrease the temperature differential, stick only a portion of the heating wrap to the fermenter. For precise results, we recommend using our temp controller (FE610) and carboy thermowell (FE612) for the ultimate in fermentation temperature contol. For heating small stainless variable volume fermenters and barrels up to 30 gallons a single FermWrap! works great. For volumes of 60 gallons or more, we recommend using two or more FermWraps (we do this in our winery Olin Wines all the time!). With 40 watts of heat spread over two square feet it provides gentle even heating. Draws 40 watts. 115V. Manufactured by Fermentap. Kegland Part number: KL06255 

Read more less

This screw cap fits onto our 1 gallon glass jugs, and has a hole in the middle for an airlock. We use it as a replacement for our stoppers when doing small batches of mead and cider.

Read more less

Pick up two airlock and stopper combos for a lower price! Includes two S-Shaped airlocks and two Universal Stoppers. Fits a 2.8, 3, 5, 6, or 6.5 gallon glass carboy, as well as 500ml Erlenmeyer flask. Please Note: This stopper will not fit in plastic carboys, Better Bottles or Speidel Plastic Fermenters.  

Read more less

Prevent spillage and overflowing with this uniquely designed funnel with high backsplash. Fits carboy necks.

Read more less

As far as bucket spigots go, this is about as cool as you get. First, unlike many other designs, these spigots don't leak (bonus).  Second it rotates even when sealed so it won't hit the table or floor (duh!). Third the outlet barb has two different diameters so that you can attach  3/8" or 1/2" tubing (thats cool). The interior nut on these spigots also have a unique design where the opening can be rotated up to effectively block sediment if used in a bucket for fermentation or can be rotated down when used in a bottling bucket (genius).  These are also just beefier than other spigots on the market.

Read more less

Drill a 1'' hole and install in bucket. Spigot uses 3/8 in ID tubing. Place the gasket on the outside of the bucket. Also fits ported Fermonsters and attaches the same way.

Read more less

Got a stuck lid on your Fermonster? Get it open much easier with this specially designed lid opener. It easily slides onto the lid and gives you comfortable hand grips to open a stuck lid. Note: We do not recommend using this tool to tighten the lid because the seal is made by the o-ring and not the pressure between the lid and neck.

Read more less

Use the Carboy Carrier to move your Fermonster or Plastic Carboy around with ease. The harness and strap handles are made from heavy-duty polypropylene, enabling you to haul up to 100 lbs of your wine without the risk of loosing your grip. Cradle your carboy with confidence and avoid spilling! The carrier comes with handles in two different positions for added convenience. Short handles for lifting and long handles for moving. The long handles are especially handy when lifting your carboy out of a top-loading fermentation locker. Compatibility: 3, 5 and 6 gallon Plastic Carboys 3, 5 and 6 gallon Glass Carboys 6 and 7 gallon Fermonsters Take Care of the Carrier: Avoid prolonged exposure to sunlight Machine wash safe (low temperatures only) Do not clean with bleach or products that contain bleach Hang dry in the shade Do not iron

Read more less

Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. It is also intended to provide a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Quiet, Fun, & Easy to Use Very quiet when in use and most importantly speeds up the process of cleaning and sanitizing.    Light in weight.  Easy to store.  Cleans Kegs Cleans and sanitizes a cornelius keg without having to take apart the ball lock fittings, poppets, and dip tubes. You can clean the keg and the dip tube simultaneously using the T adapter. Cleans Tubing Too Cleans tube separately utilizing the pump with the additional barb fittings included.  Cleans Parts Reservoir holds 1.25 gallons of water making it easy to fill and empty with sanitizer.     Saves water and sanitizer.  The unit does not have an on/off switch, you can plug it directly into a wall outlet to operate the pump or plug it into an outlet that is controlled by a switch. Never leave the keg washer unattended when in use. When in use, fill the keg washer up to about 1 inch under the brim. The pump is not self priming, so always make sure the basin is full of water before plugging in the pump. Owner's Manual is included. Please read thoroughly before using. Dimensions of the inside of the washer's reservoir are: 6"L x 12"W x 4"D. Please Note: Product does not include the bucket, carboy, or keg pictured above for display purposes. The pump specs are: 520 GPH 120 Volts AC 40 watts Ceramic shaft, impeller

Read more less

A great carboy hood for a real snug fit. Fits our 3, 5, and 6 gallon glass carboys. Will also fit over our 5 and 6 gallon plastic carboys. Ideal to use if you have a real active fermentation. Add 3' of 1/2" racking tubing to your 3-piece airlock. Take out the bubbler piece to assemble into a blow-off setup.

Read more less