prebook
-
Brewtools Power Cable | NEMA 6-20P (230V) | LP20 3-Pin Female | 2m | 6.5 ft.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Power cable for the B25/B50/B100 Brewing System (230V). The B100 requires 2x power cables. Connector A: NEMA 6-20P Connector B: LP20, 3-pin female plug Color: Black Length: 2m (6.5 ft.)
$35.90
-
Brewtools Power Cable | NEMA 5-15P (120V) | LP20 3-Pin Female | 2m | 6.5 ft.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Power cable for the B25 Brewing System (120V). Connector A: NEMA 5-15P Connector B: LP20, 3-pin female plug Color: Black Length: 2m (6.5 ft.)
$49.90
-
Brewtools Steam Condenser | 2" T.C.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. This steam condensers fits 2" ports (B50, B100, B180 steam hats) and uses cold water to cool the steam until it becomes a liquid that runs out of the condenser to a bucket or directly to the drain. The unit is an excellent alternative to a ventilation system. The unit ships with a nozzle that supplies 0.29 gallons of water per minute at 4 bar (58 psi) pressure. We also offer other nozzles that offers higher or lower flow depending on the water pressure where the system is used and other factors (sold separately). You also need: TC 2" Clamp and gasket Water inlet adapter (TC34mm to hose or garden connector etc) Outlet tube (16x25mm) A TC34mm elbow is recommended for the water inlet Please take not that you need much less power to keep the boil going with this device, and the risk of the wort boiling over is high when too much power is used, so make sure to take the necessary precautions. To sustain the vacuum, the drain tube from the condenser must not have any counterpressure. We recommend draining to a bucket where the tube is not submerged in the water, or suspend the tube directly over a floor drain.
$249.00
-
Brewtools Power Cable | NEMA 6-15P (230V) | LP20 3-Pin Female | 2m | 6.5 ft.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Power cable for the B25 Brewing System (230V). Connector A: NEMA 6-15P Connector B: LP20, 3-pin female plug Color: Black Length: 2m (6.5 ft.)
$35.90
-
Brewtools CleanCore™ 3-Way Valve | 1.5" T.C.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Our patented CleanCore™ 3-way valve sets a new standard for sanitary valve design in brewing and process applications. It has been engineered with a strong focus on hygiene, ease of maintenance, and long-term reliability. Only two components come into contact with the process fluid: the injection-molded EPDM liner and the stainless steel V-Core valve core. By eliminating unnecessary cavities, crevices, and hidden internal spaces, the design minimizes areas where residue, bacteria, or contaminants can accumulate. The EPDM liner is a replaceable wear component that can be exchanged in just a few minutes without special tools, making routine maintenance quick and cost-effective while maintaining optimal sanitary performance. The sealing force between the valve core and the liner can be adjusted using a screw located beneath the handle. This allows the valve to be fine-tuned for the ideal balance between smooth operation and reliable sealing, while also compensating for normal wear over time. The valve body is manufactured from POK (Polyketone), a highly durable engineering polymer offering excellent chemical resistance and dimensional stability. The handle and valve core are manufactured from 304 stainless steel for outstanding strength, wear resistance, and corrosion protection. Maximum operating pressure: 1 BAR.
$129.00
-
Brewtools CleanCore™ 3-Way Valve | 34mm T.C.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Our patented CleanCore™ 3-way valve sets a new standard for sanitary valve design in brewing and process applications. It has been engineered with a strong focus on hygiene, ease of maintenance, and long-term reliability. Only two components come into contact with the process fluid: the injection-molded EPDM liner and the stainless steel V-Core valve core. By eliminating unnecessary cavities, crevices, and hidden internal spaces, the design minimizes areas where residue, bacteria, or contaminants can accumulate. The EPDM liner is a replaceable wear component that can be exchanged in just a few minutes without special tools, making routine maintenance quick and cost-effective while maintaining optimal sanitary performance. The sealing force between the valve core and the liner can be adjusted using a screw located beneath the handle. This allows the valve to be fine-tuned for the ideal balance between smooth operation and reliable sealing, while also compensating for normal wear over time. The valve body is manufactured from POK (Polyketone), a highly durable engineering polymer offering excellent chemical resistance and dimensional stability. The handle and valve core are manufactured from 304 stainless steel for outstanding strength, wear resistance, and corrosion protection. Maximum operating pressure: 1 BAR.
$119.00
-
Brewtools Power Cable | NEMA L6-30, 30A (230V) | LP24 3-Pin Female | 2m | 6.5 ft.
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Power cable for the B180 Brewing System (230V). The B180 requires 2x power cables. Connector A: NEMA L6-30 Connector B: LP24, 3-pin female plug Color: Black Length: 2m (6.5 ft.)
$69.90
-
Brewtools Counterflow Chiller Kit for B50
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Kit with Counterflow Chiller, valves and accessories for use with the Brewtools B50 Brewing System. A counterflow chiller makes it possible to cool down to fermentation temperature from 40-60 degrees and will speed up your chilling process. In the box: Counterflow chiller with TC34mm connections CleanCore™ 3-way valves, TC34mm, 2 pcs TC34mm pipe, 40mm, for connecting the valves TC34mm to 19mm barb, 4 pcs TC34mm to Garden Connector, 2 pcs Tri clamp, 34mm, 10 pcs Silicone tube, 16x25mm, 2x1m Silicone elbow, 90 degrees, 2pcs Tube connector, 19mm, POK TC gaskets, 34mm, DN20 5-pack, 2 pcs
$699.00
-
Brewtools B180 Brewing System | 2x230V, 10kW | 99LB Malt
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Note: The Brewing System does not include a power cable. For the B180 230V, you will need 2 x NEMA L6-30 power cables (BT1615). See below under You Might Also Need. B180 Brewing System The B180 is a powerful all in one brewing system for serious homebrewers or small breweries. It offers simplicity out of the box, whilst keeping the level expansion possibilities. Indirect heating and included whirlpool setup for maximum yield and fast cooling through the integrated cooling jacket makes cleaning a breeze. The 8" touch display can easily be relocated on the system or externally based on your needs (longer cables are available). Included whirlpool setup for maximum yield and fast cooling. The included malt pipe has a hinge system to allow tilting the malt pipe to empty spent grains easily. The flow of wort through the FCS Brew Pump is controlled via the patented CleanCore™ 3-Way valve operated from the front. The combined temperature and level switch sensor keeps you safe by automatically switching off the pump and heating if the water level is low. With TC side ports, you can easily expand the inputs and outputs of the tank with sparge water, external added cooling with bypass etc. The B180 can be expanded with an external side-by-side mash tun that greatly increases the malt capacity and removes the need for a crane to handle the malt pipe. If you need a powerful and flexible workhorse for high volume homebrewing or a pilot brewery, the B100 or B180 is the perfect match. Indirect heating (10-degree conical bottom) Integrated cooling jacket Included whirlpool setup Included hinged steam hat Tiltable malt pipe Powered by FCS Brewing with an 8" Touch Screen Patented CleanCore™ sanitary 3-way valves 2 side TC ports for expansion Optional external mash tun and counterflow chiller Included temperature sensor for malt pipe Remember to get power cables for your area (purchased separately) You will need 2 x NEMA L6-30 power cables (BT1615). Drawings / Schematic for setup Available controller ports: 2 CAN bus ports (+24V) 1 High Power CAN bus port for external mash pump 1 external high-level switch (for external mash tun) 1 mash temp sensor input 1 return temp sensor input (optional) In the box: B180 brewing system with malt pipe and steam hat Malt pipe with laser cut filter 1 CleanCore™ 3-way valve Silicone tubing for draining and recirculation Parts and accessories for assembly Mash sensor (probe with 2m cable) Specifications: Batch size: 7.92 - 47.55 gallons Total volume capacity: 52.04 gallons Grain capacity: 99.2 lbs Heating power: 10000W (230V) Watt density: 28.3W/in² Control system: FCS Brewing with 8" IPS touch screen Connectivity: Wi-Fi 2.4 GHz 802.11ax/b/g/n Pump: Brewtools FCS Brew Pump, 7.9 gal/min, 14.7 ft. head Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Valves, fittings, and connections: TC 1.5" (TC34mm for cooling jacket) System height with steam hat: 43.3" Tank dimensions: Ø23.6", height 27.5" (52.3 gallons) Malt pipe dimensions: Ø19.6", height 26" (34.2 gallons) Packing dimensions and weight: 30" x 30" x 49.2" Safety features: Overheat protection, dry-boil protection, liquid detection 5 year manufacturer's warranty Remember: Power cable(s) Connectors for cooling jacket (kit or custom setup) Troll table with crane Steam condenser Models in pictures are prototypes. Changes/improvements may occur. For User Manuals and support, please follow this link to Brewtools Docs.
$4,990.00
-
Brewtools Cooling Connector Kit | Quick Connectors | For B25/B50/B100/B180
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Kit with everything you need to connect our leak free quick connectors to the cooling jacket on your brewing system. The quick connector is connected to the lower port and the 10mm barb on the upper port to prevent any pressure in the jacket. Made for Brewtools 8.5x14mm reinforced EVA tube In the box: Tri Clamp 34mm, 2 pcs TC Gasket, 34mm, DN20 5-pack, 1 pcs TC34mm to 10mm barb TC34mm to 3/8" F-NPT, 1 pcs Quick Connector, Female to 3/8" NPT, 1 pcs Quick Connector, Male to 10mm barb, 1 pcs You also need: 8.5x14mm EVA-tube required from your water source and to your drain Adapter from your water source to the 8.5x14mm tube (9-10mm barb)
$99.00
-
Brewtools B100 Mash Tun
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Mash tun for B100 The external mash tun for B100 increases the malt capacity and removes the need for a crane to lift the malt pipe. The tank comes with a grain door and chute for easy emptying of spent grains. Integrated FCS Brew Pump which connects to your B100. The pump is automatically controlled by an integrated top-level sensor. The mash tun has the same bottom CleanCore™ 3-way valve as the B100 and wort is circulated over the grains through the center pipe. In the box: B100 Mash Tun with lid and malt chute Center pipe for B100 mash tun Laser Cut Filter for B100 mash tun FCS Brew Pump TC 1.5" CleanCore™ 3-way valve, TC1.5"mm Level Switch Sensor, TC 1.5" Thermowell Elbow, Gaskets, Tri Clamps and accessories. Specifications: Total volume: 29 gallons Grain capacity: 83.7 lbs Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Full height: 32.8" Tank dimensions: Ø19.6", height 18.3" over filter (29.3 gallons) Models in pictures are prototypes. Changes/improvements may occur.
$2,690.00
-
Brewtools Counterflow Chiller Kit for B100/B180
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Kit with Counterflow Chiller, valves and accessories for use with the Brewtools B100 and B180 Brewing Systems. A counterflow chiller makes it possible to cool down to fermentation temperature from 40-60 degrees and will speed up your chilling process. In the box: Counterflow chiller with TC34mm connections CleanCore™ 3-way valves, TC1.5", 2 pcs TC1.5" pipe, 40mm, for connecting the valves TC34mm to 19mm barb, 2 pcs TC 1.5" to 19mm barb, 2 pcs TC34mm to Garden Connector, 2 pcs Tri clamp, 34mm, 4 pcs Tri clamp, 1.5", 6 pcs Silicone tube, 16x25mm, 2x1m Silicone elbow, 90 degrees, 2pcs Tube connector, 19mm, POK TC gaskets, 34mm, DN20 5-pack, 2 pcs
$749.00
-
Brewtools B180 Mash Tun
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Mash tun for B180 The external mash tun for B180 increases the malt capacity and removes the need for a crane to lift the malt pipe. The tank comes with a grain door and chute for easy emptying of spent grains. Integrated FCS Brew Pump which connects to your B180. The pump is automatically controlled by an integrated top-level sensor. The mash tun has the same bottom CleanCore™ 3-way valve as the B180 and wort is circulated over the grains through the center pipe. In the box: B180 Mash Tun with lid and malt chute Center pipe for B180 mash tun Laser Cut Filter for B180 mash tun FCS Brew Pump TC 1.5" CleanCore™ 3-way valve, TC1.5"mm Level Switch Sensor, TC 1.5" Thermowell Elbow, Gaskets, Tri Clamps and accessories. Specifications: Total volume: 52.3 gallons Grain capacity: 143 lbs Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Full height: 39.3" Tank dimensions: Ø23.6", height 26.1" over filter (49.6 gallons) Models in pictures are prototypes. Changes/improvements may occur.
$3,390.00
-
Brewtools B50 Stackable Mash Tun
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Stackable Mash Tun for B50 With the external mash tun the malt capacity increases for your B50 brewing system. Wort is sent up to the mash tun with the center pipe connection and circulates over the grain in the mash tun. The flow down to the B50 tank is adjusted with the included CleanCore™ Pinch valve. The mash tun has an integrated top-level sensor to automatically stop the pump if the tank is full. In the box: B50 Mash Tun with lid Center pipe for B50 mash tun Laser Cut Filter for B50 mash tun CleanCore™ Pinch Valve, TC34mm Level Switch Sensor, TC 1.5" Thermowell Elbow, Gaskets, Tri Clamps and accessories. Specifications: Total volume: 13.7 gallons Grain capacity: 39.6 lbs Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Full height: 23.6" Tank dimensions: Ø15.7", height 16.5" (13.9 gallons) Picture on top of a B50 (not included). Models in pictures are prototypes. Changes/improvements may occur.
$1,099.00
-
Brewtools B50 Brewing System | 230V, 3.3kW | 22LB
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Note: The Brewing System does not include a power cable. For the B50 230V, we recommend the NEMA 6-20P power cable (BT1618). See below under You Might Also Need. B50 Brewing System The B50 is the workhorse of homebrewers. It offers simplicity out of the box, whilst keeping the level expansion possibilities. Indirect heating and included whirlpool setup for maximum yield and fast cooling through the integrated cooling jacket makes cleaning a breeze. The 8" touch display can easily be relocated on the system or externally based on your needs (longer cables are available). Included whirlpool setup for maximum yield and fast cooling. The flow of wort through the FCS Brew Pump is controlled via the patented CleanCore™ 3-Way valve operated from the front. The combined temperature and level switch sensor keeps you safe by automatically switching off the pump and heating if the water level is low. With TC side ports, you can easily expand the inputs and outputs of the tank with sparge water, external added cooling with bypass etc. The B50 can also be expanded with a stackable external mash tun that allows for very high gravity brewing and higher efficiency compared to the integrated malt pipe. If you need a powerful and flexible workhorse without the large volume, the B50 is the perfect match. Indirect heating (10-degree conical bottom) Integrated cooling jacket Included whirlpool setup Included hinged steam hat Powered by FCS Brewing with an 8" Touch Screen Patented CleanCore™ sanitary 3-way valves 2 side TC ports for expansion Optional external mash tun and counterflow chiller Included temperature sensor for malt pipe Remember to get power cables for your area (purchased separately). We recommend the NEMA 6-20P power cable (BT1618). Drawings / Schematic for setup Available controller ports: 1 CAN bus ports (+24V) 1 external high-level switch (for stackable mash tun) 1 mash temp sensor input In the box: B50 brewing system with malt pipe and steam hat Malt pipe with laser cut filter 1 CleanCore™ 3-way valve Silicone tubing for draining and recirculation Parts and accessories for assembly Mash sensor (probe with 2m cable) Specifications: Batch size: 2.64 - 10.56 gallons Total volume capacity: 13.73 gallons Grain capacity: 22 lbs Heating power: 3300W (230V) Watt density: 24W/in² Control system: FCS Brewing with 8" IPS touch screen Connectivity: Wi-Fi 2.4 GHz 802.11ax/b/g/n Pump: Brewtools FCS Brew Pump, 7.9 gal/min, 14.7 ft. head Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Valves, fittings, and connections: TC34mm System height with steam hat: 28.8" Tank dimensions: Ø15.7", height 16.5" (13.94 gallons) Malt pipe dimensions: Ø12.4", height 15.1" (7.92 gallons) Packing dimensions and weight: 22" x 22" x 31.5" Safety features: Overheat protection, dry-boil protection, liquid detection 5 year manufacturer's warranty Remember: Power cable(s) Connectors for cooling jacket (kit or custom setup) Troll table with crane Steam condenser Models in pictures are prototypes. Changes/improvements may occur. For User Manuals and support, please follow this link to Brewtools Docs.
$2,990.00
-
Brewtools B100 Brewing System | 2x230V, 6kW | 57LB Malt
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Note: The Brewing System does not include a power cable. For the B100 230V, we recommend the NEMA 6-20P power cable (BT1618). See below under You Might Also Need. B100 Brewing System The B100 is a powerful all in one brewing system for serious homebrewers or small breweries. It offers simplicity out of the box, whilst keeping the level expansion possibilities. Indirect heating and included whirlpool setup for maximum yield and fast cooling through the integrated cooling jacket makes cleaning a breeze. The 8" touch display can easily be relocated on the system or externally based on your needs (longer cables are available). Included whirlpool setup for maximum yield and fast cooling. The included malt pipe has a hinge system to allow tilting the malt pipe to empty spent grains easily. The flow of wort through the FCS Brew Pump is controlled via the patented CleanCore™ 3-Way valve operated from the front. The combined temperature and level switch sensor keeps you safe by automatically switching off the pump and heating if the water level is low. With TC side ports, you can easily expand the inputs and outputs of the tank with sparge water, external added cooling with bypass etc. The B100 can be expanded with an external side-by-side mash tun that greatly increases the malt capacity and removes the need for a crane to handle the malt pipe. If you need a powerful and flexible workhorse for high volume homebrewing or a pilot brewery, the B100 or B180 is the perfect match. Indirect heating (10-degree conical bottom) Integrated cooling jacket Included whirlpool setup Included hinged steam hat Tiltable malt pipe Powered by FCS Brewing with an 8" Touch Screen Patented CleanCore™ sanitary 3-way valves 2 side TC ports for expansion Optional external mash tun and counterflow chiller Included temperature sensor for malt pipe Remember to get power cables for your area (purchased separately) We recommend the NEMA 6-20P power cable (BT1618) Drawings / Schematic for setup Available controller ports: 2 CAN bus ports (+24V) 1 High Power CAN bus port for external mash pump 1 external high-level switch (for external mash tun) 1 mash temp sensor input 1 return temp sensor input (optional) In the box: B100 brewing system with malt pipe and steam hat Malt pipe with laser cut filter 1 CleanCore™ 3-way valve Silicone tubing for draining and recirculation Parts and accessories for assembly Mash sensor (probe with 2m cable) Specifications: Batch size: 5.28 - 26.41 gallons Total volume capacity: 30.90 gallons Grain capacity: 57.3 lbs Heating power: 6000W (230V/400V) Watt density: 25.8W/in² Control system: FCS Brewing with 8" IPS touch screen Connectivity: Wi-Fi 2.4 GHz 802.11ax/b/g/n Pump: Brewtools FCS Brew Pump, 7.9 gal/min, 14.7 ft. head Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Valves, fittings, and connections: TC 1.5" (TC34mm for cooling jacket) System height with steam hat: 37.4" Tank dimensions: Ø19.6", height 23.6" (31.1 gallons) Malt pipe dimensions: Ø16.3", height 22.2" (20.1 gallons) Packing dimensions and weight: 26" x 26" x 39.3" Safety features: Overheat protection, dry-boil protection, liquid detection 5 year manufacturer's warranty Remember: Power cable(s) Connectors for cooling jacket (kit or custom setup) Troll table with crane Steam condenser Models in pictures are prototypes. Changes/improvements may occur. For User Manuals and support, please follow this link to Brewtools Docs.
$3,990.00
-
Brewtools B25 Brewing System | 120V, 1.5kW | 10.5LB Malt
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Note: The Brewing System does not include a power cable. For the B25 120V, we recommend the NEMA 5-15P power cable (BT1616). See below under You Might Also Need. B25 Brewing System The B25 is designed to be the ultimate brewing system for kitchens, apartments, and other space-conscious environments. It combines exceptional simplicity and ease of use with the same powerful technology found in its larger siblings. Indirect heating and the integrated cooling jacket make cleaning quick and effortless, while the 8" touchscreen can be mounted directly on the system or remotely to suit your workspace (optional longer cables available). Wort flow through the FCS Brew Pump is precisely controlled via the patented CleanCore™ sanitary 3-way valve, conveniently operated from the front of the system. An integrated temperature and liquid level sensor continuously monitor the system and automatically disables both the pump and heating elements if the liquid level becomes too low, ensuring safe operation. All in all, the B25 is built to be insanely durable and easy to use. Indirect heating (flat bottom) Integrated cooling jacket Powered by FCS Brewing with an 8" Touch Screen Patented CleanCore™ sanitary 3-way valve Remember to get power cables for your area (purchased separately). We recommend the NEMA 5-15P power cable (BT1616). Drawings / Schematic for setup Available controller ports: 1 CAN bus ports (+24V) 1 external high-level switch (not used on the B25 as of now) 1 mash temp sensor input (sold separately) In the box: B25 brewing system with malt pipe and lid Malt Pipe with laser cut filter Malt pipe draining holder Silicone tubing for draining and recirculation Parts and accessories for assembly Specifications: Batch size: 1.32 - 5.28 gallons Total volume capacity: 7.39 gallons Grain capacity: 10.5 lbs Heating power: 1500W (120V) Watt density: 20.2W/in² Control system: FCS Brewing with 8" IPS touch screen Connectivity: Wi-Fi 2.4 GHz 802.11ax/b/g/n Pump: Brewtools FCS Brew Pump, 7.9 gal/min, 14.7 ft. head Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Valves, fittings, and connections: TC34mm System height: 25" Tank dimensions: Ø11.8", height 15.7" (7.4 gallons) Malt pipe dimensions: Ø8.8", height 13.5" (3.6 gallons) Packing dimensions and weight: 17.3" x 17.3" x 27.5" Safety features: Overheat protection, dry-boil protection, liquid detection 5 year manufacturer's warranty Remember: Power cable(s) Connectors for cooling jacket (kit or custom setup) Tubing for cooling setup Models in pictures are prototypes. Changes/improvements may occur. For User Manuals and support, please follow this link to Brewtools Docs.
$1,799.00
-
Brewtools B25 Brewing System | 230V, 2kW | 10.5LB Malt
Coming soon! The newest Brewing Systems and accessories from Brewtools are now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is January 2027. Note: The Brewing System does not include a power cable. For the B25 230V, we recommend the NEMA 6-15P power cable (BT1617). See below under You Might Also Need. B25 Brewing System The B25 is designed to be the ultimate brewing system for kitchens, apartments, and other space-conscious environments. It combines exceptional simplicity and ease of use with the same powerful technology found in its larger siblings. Indirect heating and the integrated cooling jacket make cleaning quick and effortless, while the 8" touchscreen can be mounted directly on the system or remotely to suit your workspace (optional longer cables available). Wort flow through the FCS Brew Pump is precisely controlled via the patented CleanCore™ sanitary 3-way valve, conveniently operated from the front of the system. An integrated temperature and liquid level sensor continuously monitor the system and automatically disables both the pump and heating elements if the liquid level becomes too low, ensuring safe operation. All in all, the B25 is built to be insanely durable and easy to use. Indirect heating (flat bottom) Integrated cooling jacket Powered by FCS Brewing with an 8" Touch Screen Patented CleanCore™ sanitary 3-way valve Remember to get power cables for your area (purchased separately). We recommend the NEMA 6-15P power cable (BT1617). Drawings / Schematic for setup Available controller ports: 1 CAN bus ports (+24V) 1 external high-level switch (not used on the B25 as of now) 1 mash temp sensor input (sold separately) In the box: B25 brewing system with malt pipe and lid Malt Pipe with laser cut filter Malt pipe draining holder Silicone tubing for draining and recirculation Parts and accessories for assembly Specifications: Batch size: 1.32 - 5.28 gallons Total volume capacity: 7.39 gallons Grain capacity: 10.5 lbs Heating power: 2000W (230V) Watt density: 26.9W/in² Control system: FCS Brewing with 8" IPS touch screen Connectivity: Wi-Fi 2.4 GHz 802.11ax/b/g/n Pump: Brewtools FCS Brew Pump, 7.9 gal/min, 14.7 ft. head Materials: 304 Stainless steel, food grade silicone, EPDM, POK (Polyketone) Valves, fittings, and connections: TC34mm System height: 25" Tank dimensions: Ø11.8", height 15.7" (7.4 gallons) Malt pipe dimensions: Ø8.8", height 13.5" (3.6 gallons) Packing dimensions and weight: 17.3" x 17.3" x 27.5" Safety features: Overheat protection, dry-boil protection, liquid detection 5 year manufacturer's warranty Remember: Power cable(s) Connectors for cooling jacket (kit or custom setup) Tubing for cooling setup Models in pictures are prototypes. Changes/improvements may occur. For User Manuals and support, please follow this link to Brewtools Docs.
$1,799.00
-
KOMOS® Stainless Steel S-Style Keg Coupler (With PRV) 1/4 in. Barb Connectors Included
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. 1/4" tailpieces are ideally used with 3/16" draft line for a tight fit. If you'd prefer to use a different size tubing, the KOMOS S-style coupler for European kegs can also be purchased bare so you can mix and match your preferred tailpiece sizes. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$54.99
-
KOMOS® Stainless Steel S-Style Keg Coupler with 8 mm Duotight Adapters
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$51.99
-
KOMOS® Stout & Cold Brew Coffee Kegerator | NukaTap® Stainless Steel Faucets | Fan Cooled Stainless Tower | Digital Thermostat | Casters | Regulator | Fits 1 Half Barrel Keg or 4 Corny Kegs
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. The KOMOS Stout & Cold Brew Coffee Kegerator comes with NukaTap faucets with Stout Spout attachments to give your beverage an extra creamy pour. Every unit also comes with an adapter to use the included KOMOS CO2 regulator with a Nitrogen gas cylinder. For each faucet, you will also receive the standard faucet spout so you can mix and match your taps and use some for Stout or Cold Brew and some for serving beer, soda, or other beverages. Serving with Nitrogen Nitrogen cylinders can be filled with either pure nitrogen or "Beer Gas", which is a blend of Nitrogen and CO2. Pure nitrogen is recommended for serving cold brew coffee in order to avoid the effects of carbonation. Carbonic acid dissolving into solution will change the mouthfeel of your cold brew and heighten the acidity and bitterness. Stouts, on the other hand, are commonly served with a mix of Nitrogen and CO2, and will give your pours that signature Guinness-like cascade of bubbles as CO2 is knocked out of solution when it passes through the stout spout's aerator disc. Beer gas can also be used to serve other styles of beer, or you can feed a pure CO2 line into the kegerator from a separate CO2 tank. Please note that the kegerator only includes one regulator and does not include a nitrogen cylinder. An empty nitrogen tank can be added to your order above. If you plan to use two different types of gas, you will need to purchase a second regulator and gas cylinder. NukaTap Forward Sealing Faucets NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. KOMOS Kegerator The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. NukaTap Stainless Faucets and Towers All kegerators come with either NukaTap faucets for mounting on the stainless tower. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout. This model includes the all stainless faucet which we think is a must have upgrade over chrome plated brass. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Stainless Steel Forward-Sealing Faucets (choose number of taps above) Stout Spouts and Standard Spouts for each faucet Robust KOMOS Dual Gauge CO2 Regulator with included Nitrogen tank adapter Stainless Steel Air Cooled Tower Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
$959.99
-
KOMOS® Stainless Steel Sanke Keg Beer Tap - S-Style Keg Coupler (With PRV)
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. KOMOS stainless S-Style beer tap for European brand kegs including Heineken, Newcastle, Pilsner Urquell, and Stella Artois. The coupler comes without fittings so it can be adapted however the user sees fit. When assembling, insert the rubber "duck bill" check valve into the side gas-in port. The check ball and ball retainer are placed in the top beverage-out port. Nuts and tailpieces for standard draft line and Duotight fittings for use with EVABarrier can be found below. The Green corny keg-style PRV is rated to 4.5 BAR (65 psi). It can be swapped out with PRVs with a lower or higher pressure rating if desired. Always check the pressure rating of your keg before swapping PRVs.
$44.99
-
KOMOS® Stainless Steel D-Style Keg Coupler with 8 mm Duotight Adapters
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. D-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$49.99
-
KOMOS® Stainless Steel S-Style Keg Coupler with Ball Lock Quick Disconnect (QD) Adapters
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. If your home draft system is a mix of ball lock kegs and European sanke kegs, having a coupler with ball lock adapters is a huge plus. This allows you to have all your draft lines ending in a ball lock quick disconnect, making it quick and easy to swap lines from sanke keg to ball lock. Note that the gas-in adapter has a small line cut into the body of the adapter where the bev-out adapter is smooth. The check valves will need to be installed before first use. The silicone check valve is inserted on the side gas-in port and the check ball and ball retainer are inserted on the top bev-out port. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)
$74.99
-
BrewBuilt® X3 Jacketed Uni Conical Fermenter | Premium Chilling Package | IceMaster Max 4
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. The X3 Jacketed Conical and IceMaster Max 4 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 4 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling With room to connect up to 4 conicals, this package is perfect for brewers planning to expand their fermentation capacity over time Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 4? This powerful glycol chiller has more than enough cooling capacity for your chosen X3 Conical with room to add an additional three fermenters down the road. X3 Jacketed Uni Conical & IceMaster Max 4 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 4 makes for the perfect tag team partner, providing all the cooling capacity you'll need for up to four fermenters. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.
$2,479.99
-
Two-Faucet Kegerator conversion kit
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Just like our popular D1000 but with enough hardware to allow for two kegs to be tapped at the same time. Kit includes: Aluminum CO2 tank (new) Dual gauge regulator Two Faucets(SS lever),knobs and shanks Stainless steel drip pan Two Sanke keg valve taps All hoses, clamps and instructions Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.
$274.99
-
DigiMash Electric Brewing System | Recirculation Pump Kit | Gen 2 DigiBoil | 65L | 17.1G | 220V
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 65L DigiBoil, DigiMash Upgrade Kit, and Recirculation Pump Kit. The recirculation pump kit allows for constant recirculation during the mash, leading to better conversion and clarity. The pump can also be used for transferring wort to your fermenter. This model runs off 220V power and has three heating elements (2000w, 1000w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). DigiBoil Features: 304 stainless steel construction 17-gallon total capacity Digital temperature control 220V / 15A power NEMA 6-30R plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W Mash Upgrade Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen Recirculation Pump Kit Includes: High temp magnetic drive pump Recirculation arm with male camlock Female camlock with barb fitting 1/2" FPT x 1/2" barb fitting 1/2" MPT x 5/8" barb fitting 1/2" ball valve 5 ft. length of silicone tubing 4 x hose clamps Plumber's tape NOTE: Due to the size of this item, it is not eligible for international shipping.
$599.99
-
DigiMash Electric Brewing System | Recirculation Pump Kit | Gen 2 DigiBoil | 35L | 9.25G | 220V
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 35L DigiBoil, DigiMash Upgrade Kit, and Recirculation Pump Kit. The recirculation pump kit allows for constant recirculation during the mash, leading to better conversion and clarity. The pump can also be used for transferring wort to your fermenter. This model runs off 220V power and has dual heating elements (1900w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). DigiBoil Features: 304 stainless steel construction 9-gallon total capacity Digital temperature control 220V / 15A power NEMA 6-30R plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W Mash Upgrade Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen Recirculation Pump Kit Includes: High temp magnetic drive pump Recirculation arm with male camlock Female camlock with barb fitting 1/2" FPT x 1/2" barb fitting 1/2" MPT x 5/8" barb fitting 1/2" ball valve 5 ft. length of silicone tubing 4 x hose clamps Plumber's tape
$449.99
-
DigiMash Electric Brewing System | Recirculation Pump Kit | Gen 2 DigiBoil | 35L | 9.25G | 110V
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 35L DigiBoil, DigiMash Upgrade Kit, and Recirculation Pump Kit. The recirculation pump kit allows for constant recirculation during the mash, leading to better conversion and clarity. The pump can also be used for transferring wort to your fermenter. This model runs off 110V power and has dual heating elements (1000w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). DigiBoil Features: 304 stainless steel construction 9-gallon total capacity Digital temperature control 110V / 15A power and plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W Mash Upgrade Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen Recirculation Pump Kit Includes: High temp magnetic drive pump Recirculation arm with male camlock Female camlock with barb fitting 1/2" FPT x 1/2" barb fitting 1/2" MPT x 5/8" barb fitting 1/2" ball valve 5 ft. length of silicone tubing 4 x hose clamps Plumber's tape
$449.99
-
Brewtools | Brite 80 Light | 5.2-19.8 Gallon Capacity Brite Tank
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Brite Light offers the same tank body as the standard Brewtools Brite Tank with a slight difference in included accessories for a more affordable price Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brite Light is the same tank body as the standard Brewtools Brite Tank, but with a different pressure relief valve and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Brite Light can be upgraded to a standard brite tank where you prefer. Key Differences: CleanCore butterfly valve made from Polyketone Barbed blow-off PRV Can be set to open for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Does not include neoprene insulation jacket Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 39.3" Packaging size: 36.2" (h) x 19.6" (w) x 19.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 21.3 gallons Max rec. volume: 19.8 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI The Light version of the tank does not include the insulation jacket, and has the Brewtools CleanCore butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com
$1,603.00
-
MB® 2 bbl Conical Unitank Fermenter | Single Shell | COSMETIC DEFECT
Now available for pre-order. This unit is expected to be available in mid July. Due to it's cosmetic defect the price has been discounted 30% from the standard pricing for the MB® 2 bbl Conical Unitank Fermenter. Condition: New - Cosmetic Defective This unit is new. It is in new and good condition but has cosmetic defect(s) such as scratch(es), dent(s), and/or has damaged packaging Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! 20% extra headspace with a working volume of 2 bbl and max volume of 2.4 bbl 2mm thick single shell design—See related product for the 2 bbl Jacketed Conical Ships domestically from within the contiguous United States These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. Starting with High Quality 304 grade stainless steel, the tank features a 2 mm thick single shell design. Large 12" T.C. dome top port allows easy access for cleaning and sanitizing, and on top of that, a 1.5" T.C. port allows for the attachment of a CIP spray ball. Useful features such as Blowoff Pipe, Hop Ports and Rotating Racking Arms keep you brewing and fermenting at top efficiency. The 1 & 2 bbl MB Conicals feature a sealed pressure gauge, as well as plunger style sample port to protect against infection. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features: 304 stainless steel construction Single shell design, inner surface is 2B finish and passivated Oversized for 20% headspace Pressure/Vacuum relief valve 1 Bar / 15 PSI 60° conical bottom Sample valve Rotating racking arm Analog temperature gauge Yeast dump port Hop port CIP port Carb stone Separate blow-off pipe with 1.5" T.C. x 3/4" barb Specifications: Grade 304 Stainless Steel 2mm think single shell design Internal Finish: #2B Total Height w/ Blowoff Pipe: 62" Tank Diameter: 26" Empty Weight: 152 lbs Working Volume: 2 bbls Max Volume: 2.4 bbls Working Pressure: 1 Bar (14.5 psi) All ports are 1.5" TC except for 12" TC Dome Port and 4" TC Hop Port Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
$1,770.99
-
KOMOS® DraftMaster Glycol Chiller
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The KOMOS DraftMaster is a perfect solution for small beer-serving establishments. This is very unique, dual purpose glycol beer chiller, with the ability to chill a trunk line while also being able to cool 4 additional unfrigerated beers inline. It features 4 built-in stainless steel draft coils that remain submersed in a glycol solution reservoir, as well as a dedicated submersible draft line pump that can be used to pump glycol solution through flooded draft towers or other draft line chilling apparatuses. The draft coils are made from 8 mm OD stainless steel tubing. The inlets and outlets come ready for use with 8 mm Duotight fittings, or standard hose clamp / compression fittings if preferred. The temperature drop of the beverage after one pass through the coil will depend on several factors, such as the temp of the pre-chilled beer, reservoir solution, and ambient environment. Ideally, the DraftMaster should be used in ambient temperatures below 80°F with a 30% glycol solution. If operating the unit in hotter climates or with a non-glycol cooling solution, if you are using the inline chilling coils you may need to pass the beverage through two coils to lower it to serving temperature. Although the DraftMaster is ideally used with propylene glycol to lower the cooling solution below 32°F, home users may find it works perfectly well with 100% distilled/RO water. We recommend leaving the reservoir temperature at or above 38°F when using water only, which will work well for cooling a single KOMOS Cobra tower or other glycol-ready draft tower. Specifications: 4 built-in 8 mm OD stainless draft coils Submersible pump: 35 watts Max Head: 21 ft. (6.5 m) Max Flow Rate: 528 GPH (2000 LPH) 30L / 8 Gallon Water Tank Capacity 3/8 HP compressor 750 Watt/2600 btu Cooling Capacity Draft coils made from 304 stainless steel Labeled IN and OUT bulkheads r134a Refrigerant 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified Warning: do not set the reservoir temperature controller lower than 25°F (-4°C). Running the chiller below this temperature may damage the unit.
$1,099.99
-
KOMOS® Deluxe Kegerator | Stainless Steel Exterior | Fan Cooled Stainless Tower | Digital Thermostat | Casters | Regulator | Fits 1 Half Barrel Keg or 4 Corny Kegs
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. What makes KOMOS Kegerators better than the rest? Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps Choose from the classic stainless model faucet or the upgraded stainless flow control model Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted The KOMOS® Deluxe Kegerator model features an eye-catching stainless steel exterior and upgraded stainless steel drip tray The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Forward-sealing Stainless Faucets and Towers All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will only include the cheapest, standard chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use. Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic and Flow Control faucet models. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Stainless Steel Air Cooled Tower NukaTap Stainless Steel Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless steel door, top cover, and side panels Stainless Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 (1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. (The Deluxe Kegerator does not have feature a Guard Rail as seen in the residential kegerator instructions.) Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.
$949.99
-
KOMOS® Pro Stainless Steel Outdoor Kegerator | Stainless NukaTap® Faucets | Fan Cooled Stainless Tower | Digital Thermostat | Undercounter Built-In | Heavy Duty Casters | Fits 1 Half Barrel Keg or 3 Corny Kegs
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. KOMOS Key Features on the Best Value Outdoor Kegerator Available! Outdoor ready kegerator can be built-in undercounter in your outdoor bar because it vents through the bottom front. Stainless! Stanless steel exterior and interior and one of the only kegerators available with an air cooled stainless tower and stainless forward sealing faucets Choose from the classic stainless model faucet or the upgraded stainless flow control model Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower Duotight push-to-connect fittings are newest and easiest way to connect draft lines. Also makes future line replacment super easy! Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Commercial quality compressor keeps beer cold in the warmest situations. The KOMOS Outdoor Kegerator with stainless NukaTap faucets offers the best value in the USA for an all-stainless steel outdoor rated kegerator. And we mean all stainless! Other models advertised as stainless kegerators often only have stainless exteriors and a painted interior. Similar to only working out your pecs and never your core—looks great, but doesn't really make you that strong. We've sold kegerators for 20 years, and if you're buying an outdoor stainless kegerator, you will definitely want a stainless interior. The interior is where the moisture happens, and where kegerators are most prone to rust over time. Kegerators with stainless interiors are considerably more expensive, and other units with a stainless interior and exterior sport a minimum $2,000 price tag. With an all-stainless interior and exterior, the KOMOS unit is built to operate at a level other kegerators simply can't reach, and offered at price that can't be beat. In addition to the all-stainless design, the KOMOS Kegerator offers a list of unique features that put it a cut above the rest. Front venting means this unit is perfect as build-in option under your counter. Highly-efficient refrigeration components allow the kegerator to operate quietly while serving ice cold beer in the warmest environments. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Heavy duty casters come standard for maximum mobility, and front facing ventilation makes it ideal for using as a built-in kegerator in an outdoor kitchen. Quick and easy assembly thanks to push-to-connect Duotight fittings and EVABarrier draft tubing. Stainless steel tower with cooling fan. Extra wide temperature control range from 28–86°F. And the included Taprite Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted. Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. The extended range digital controller that can be set the temperature anywhere between 28 - 76°F. This allows homebrewers to use it for fermentation and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller is located inside the unit, keeping the outside looking super clean. Stainless NukaTap Faucets and Towers All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will only include the cheapest, standard chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use. Choose from the classic forward-sealing faucet model or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic and Flow Control faucet models. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Best Choice for Outdoors With its stainless steel construction and powerful compressor this Komos Kegerator is the best choice for outdoor kitchens, bbq islands, or poolside placements. The forward-facing vents at the bottom of the kegerator allow this unit to be installed under counter without having to leave 2-3 inches on each side of the kegerators as is required with some other models. The model also features more power than the standard residential version and can stand up to ambient temperatures up to 104°F. You will want to place your kegerator in a position to be protected from rain. If you plan to install the kegerator under a countertop, the top cover will need to be removed and you will need to install the Build-In Door Hinge, as the top door hinge is removed with the cover. Easy to Clean The stainless steel countertop drip tray looks great and couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around and you are getting the very best value on an all stainless steel kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. In the rare and unfortunate scencario your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Stainless Steel Air Cooled Tower Stainless Steel NukaTap Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 28 - 76° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank strap mounts above a triangular stage inside the kegerator Efficient and powerful compressor uses R600 refrigerant Beautiful stainless interior and exterior Stainless Steel Countertop Style Drip Tray Stainless Steel Floor for additional keg support Heavy duty rolling casters come standard Front-facing vent perfect for installing unit into cabinets or under bar Lock & key to keep your precious beverages protected Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2 and 3 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 UL & CSA Certified Detailed instructions on assembly and use Specifications: 24" Wide 25" Deep 35" Tall (fridge only) 39.25" with Caster Wheels 47.75" with Tower 52" with Casters and Tower 115V - 60 hz 1.6 Amp draw Works well in ambient temperatures up to 100°F Internal Dimensions: 21" Wide 18.25" Max Depth 28.5" Tall 27" clearance under controller What Fits: 2.6 Gal. BrewKeg - 2 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 2 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 2 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual.
$1,879.99
-
Speidel Jacketed Tank | Full Jacket | Laser-Welded | Stainless Steel | 625L
Premium quality laser-welded 304 stainless steel closed tank Made in Germany by Speidel and backed by a 25-year warranty Ideal for spirits and fermented beverages like wine, beer, cider, and kombucha. Ultra-smooth 2R interior finish allows for easy cleaning with cold water Outfitted with a 6-bar max cooling jacket for efficient glycol cooling 1.5” tri-clamp ports with two additional DIN ports for included thermometer/thermowell combo and sample valve The top lid provides a convenient opening for additions and the legs provide easy access to the bottom ports Vaulted complete drainage bottom for maximum product yield and easy cleaning We are proud to present these FD storage tanks made of premium quality 304 stainless steel. Built in Germany by Speidel and sold exclusively in the USA by MoreWine! Pro for over 20 years, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality, and price, these tanks represent the very best value available in stainless steel beer storage. Safely store small volumes of product in these beautiful tanks. The legs make accessing the ports easy and the convenient top hatch makes cleaning a dream when combined with the 2R interior finish. Heavy-duty sealing mechanism and gasket form a seal on top with a stainless steel lid equipped with a T.C. port for adding accessories or an airlock. The inside is finished to Speidel quality standards with flawless welds and a 2R finish. The tanks will support a few PSI of pressure, however, they are not pressure-rated or designed to be used under pressure. Tank Ports Tanks feature 1.5" T.C. outlets (1 on bottom for complete drainage, one in middle for racking arm, one on top for blowoff/airlock), and also two welded DIN fittings. One DIN port is equipped with an included sample valve and the other has an included thermometer and thermowell combination. The cooling jackets have two 1” NPT ports. Speidel Quality Features Full Jacket - These tanks are equipped with a max cooling jacket rated to 6-bar. This will allow you to hook it into a glycol system for complete temperature control. Interior Finish - Speidel tanks feature an ultra-smooth 2R interior surface which allows you to clean your tanks with cold water, without scrubbing. This saves significant labor costs. Weld Quality - Speidel's robotic-arm laser welders create flawless stainless-to-stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual products to harbor spoilage organisms. Warranty - Speidel and MoreWine! Pro back up each and every tank with an industry-leading 25-year warranty against defects in materials or workmanship. Thickness - Speidel tanks are on average around 25% thicker than Italian-manufactured tanks of the same general capacity and dimensions. Complete Drainage Bottoms - These tanks are outfitted with vaulted bottoms for total drainage, which maximizes product yield at racking and makes cleaning a snap. Tank Features: Full Volume of 625 L (165 gal) 1.5" T.C. Drain, Racking Port, and Lid outlet 8.5" Top hatch for easy cleaning and additions 2 X DIN10 Fittings w/ Sample Valve and Thermowell/Thermometer combo Tank Dimensions: 820mm D x 1661mm H (32.25" D x 60" H)
$4,069.99
-
MB® 1 bbl Conical Unitank Fermenter | Single Shell | T.C. Sanitary Ports | All Fittings Included | Carbonation Stone | Passivated Ready to Use | American Engineered | Ships from USA
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late July. Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! 20% extra headspace with a working volume of 1 bbl and max volume of 1.2 bbl 2mm thick single shell design—See related product for the 1 bbl Jacketed Conical Ships domestically from within the contiguous United States These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. Starting with High Quality 304 grade stainless steel, the tank features a 2 mm thick single shell design. Large 10" T.C. dome top port allows easy access for cleaning and sanitizing, and on top of that, a 1.5" T.C. port allows for the attachment of a CIP spray ball. Useful features such as Blowoff Pipe, Hop Ports and Rotating Racking Arms keep you brewing and fermenting at top efficiency. The 1 & 2 bbl Conicals feature a sealed pressure gauge, as well as plunger style sample port to protect against infection. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features: 304 stainless steel construction Single shell design, inner surface is 2B finish and passivated Oversized for 20% headspace Pressure/Vacuum relief valve 1 Bar / 15 PSI 60° conical bottom Sample valve Rotating racking arm Analog temperature gauge Yeast dump port Hop port CIP port Carb stone Separate blow-off pipe Specifications: Grade 304 Stainless Steel 2mm thick single shell design Internal Finish: #2B Total Height w/ Blowoff Pipe: 53" Tank Diameter: 19.75" Empty Weight: 110 lbs Working Volume: 1 bbl Max Volume: 1.2 bbls Working Pressure: 1 Bar (14.5 psi) All ports are 1.5" TC except for 10" TC Dome Port and 4" TC Hopping Port Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order. 2 bbl example photo shown.
$2,199.99
-
BrewBuilt® Hot Liquor Tank Controller
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The BrewBuilt™ HLT Controller allows you to control a 208-240V heating element up to 30 amps based on temperature. Perfect for keeping your sparge and mash water up to temp. This controller works by turning the burner power on and off at 100% power until it reaches the temperature setpoint. Features industrial-style power switches, and a 1/6 DIN Controller mounted on a splash resistant stainless steel enclosure. Pre-cut mounting holes allow you to hang the controller on your brew stand or on the wall at eye-level. L6-30 connections with 4 ft. cords on either end. Uses a 9' stainless braided PT-100 temperature sensor. Compatible with all 208-240V elements, 30 amps and lower, with L6-30 connections. The HLT Controller includes a contactor to fully shut off both legs when you throw the power switch, making the free end of the cord safer when the element is not plugged in. If you'd prefer not to mount the controller to your wall, consider the stainless steel Controller Stand. **Caution: In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.**
$399.99
-
Kreyer Chilly 45 | Glycol Chiller | 1.2 Ton | 15,000 BTU Cooling Capacity | 208V Single Phase
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Compact chiller with commercial level cooling power Maintain fermentation temperatures, cold-stabilize insulated tanks, or maintain storage temperatures Position inside the winery or outside in a covered position Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Made in Germany by Kreyer This Chilly45 unit allows you to easily cool your ferment temperatures, cold-stabilize smaller insulated tanks, or maintain a wine tank storage temperature. This unit can be used inside the winery or placed in a covered position on the outside of the winery. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Ready to go - fill with water or a water/glycol solution and plug in. They are equipped with an efficient scroll-type compressor. Note: This unit runs off 208V single phase power. It will not run off 220V. Uses Cooling of must for cold soaks, slow starting ferments Stabilization of tataric crystals Controlling fermenting temperatures Maintaining storage temperatures in tanks/barrels (ask about our barrel snake!) Features Sheet metal housing, electrolitic galvanized high surface quality, powder-coated and abrasion-resistant encasing cover that is easily detachable 208v single phase 60Hz 14 amp supply voltage 1.28 tons (15,000 btu) of cooling power 30L/8G Insulated Plastic tank to hold water or glycol Easy to fill from outside Centrifugal recirculation pump made by Speck. Digital Thermostat Integrated pump pressure switch allows unit to work with digital automatic temperature controlers on multiple tanks. NEW Micro Channel evaporator is quieter, more efficient and uses 30% less cooling gas. High Tech, Scroll-type, efficient, low noise compressor R513a refrigerant Non-Ferrous water circuit - No Rusting! Outlet is 3/4" MPT, which accomodates hose fittings with gaskets, and includes a 1/2" barb fitting 29.75" Length 23.6" Width 19.68" Height All units pass multiple tests prior to shipment 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Need a small glycol system designed for your needs? Contact Morebeer! Pro at info@morebeerpro.com or MoreWine! Pro at info@morewinepro.com
$10,759.99
-
Filtrox 30" Filter Cartridge | 5 Micron | Polypropylene | Code 7 Ends
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Designed for exceptional clarity and stability in beverage production, Filtrox 30" filter cartridges offer a high-performance solution for small to large-scale operations. Engineered with a large filtration surface area and robust construction, these cartridges are ideal for critical stages like pre-filtration and polishing of wine, beer, spirits, juices, and more. Filtrox cartridges ensure the removal of haze-forming particles and yeast, leading to a sparkling final product with a longer shelf life and maintained flavor integrity. Specs: Clarox® PL 50 Retention Rate: 5.0 Micron Efficiency: 99.98% Maximum Pressure Differential: 72.5 psi (5 Bar) @ 77°F (25°C) Maximum Continuous Operating Temperature: 149°F (65°C) Typical Flow Rate: Beer: 400 gal/h/30" (1,514 L/hr/30") Wine: 530 gal/h/30" (2,006 L/hr/30") Water: 920 gal/h/30" (3,482 L/hr/30")
$144.99
-
MB® Cold Brew Coffee System | Mixing Rake | False Bottom Filter | Recirculation Pump
Due to high demand, the 310 gallon is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Self-contained brewing system purpose-built for producing large batches of cold brew coffee Cold brew temperature is maintained via coolant circulated around the jacketed tank Rake system ensures all coffee grounds and water are thoroughly and evenly mixed Built-in pump recirculates and clarifies the coffee when extraction is complete 217 Gallon system and above feature coffee ground hydrator and integrated brew deck For detailed power specs, dimensions, and shipping quotes contact our MoreBeer! Pro sales representatives today! The MB Cold Brew Coffee System is a self-contained electric brewhouse used for producing commercial batches of cold brew coffee. After coffee grounds and water are added to the tank, the mixing rake system ensures even distribution and full infusion of grounds and water. Program your preferred brewing temperature between 35-80°F, and the controller will automatically circulate coolant through the tank's cooling jacket to maintain your set temperature. When extraction is complete, the coffee is recirculated until it runs clear, and then passed through a filter on its way to a holding tank where it can be stored until packaging. For additional filtration when transferring liquid to your holding tank, check out the optional Filter Tank. Features: Button control panel Glass grant w/ CIP Viewing port Coffee ground hydrator (7 bbl & above) Brew deck (7 bbl & above) CIP ring below the tank to clean the underside of the screen (7 bbl & above) Liquid level sight gauge Built-in centrifugal pump Pipeline sight glass Square manway & chute All tri-clamp butterfly valves / fittings included 208V 60Hz, 3-Phase Required Power: 31 Gal: 1.3 kW 62 Gal: 1.5 kW 93 Gal: 1.5 kW 155 Gal: 1.85 kW 217 Gal: 1.85 kW 310 Gal: 3 kW Approximate Dimensions: Length (in.) Width (in.) Height (in.) 31 Gal 63 49 71 62 Gal 65 63 77 93 Gal 69 67 85 155 Gal 77 69 93 217 Gal 93 73 98 310 Gal 98 79 102
$18,499.99
-
Evill Twin Roller Mill
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid August. Give your arm a rest. There’s an easier way to make great beer than grinding the old fashioned way. This durable mill will efficiently turn even the most stubborn grains, corn and malted (and non-malted) barley into the perfect base. Features: You Know the Drill - This mill has a solid base and can be easily attached to an electric drill with no extra parts. At 500 RPM you can crush up to six pounds per minute. You can even create a "bench mill" by adding a motor, pulley wheel and belt. Customize Your Grind - easily adjustable gap setting so you can fit it to the size of the grain. Spare Your Knuckles - the longer shaft won't hit the pail if you opt to use the hand crank. Or you can attach it to a stationary mill for added convenience. It's Easy to Clean - the rollers are made of stainless steel. It's Big - the standard hopper holds 10 lbs. Versatile - easily adjusted to different sized buckets. Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.
$149.99
-
Speidel 290L BO Flat Bottom Variable Volume Tank w/ Lid
Speidel's BO style tank is a flat bottomed, variable volume tank for basic storage of wine. A no-frills tank that's just rock solid. This preconfigured tank comes with: Racking outlet with external 1.5 in. TC connection Floating lid with transparent sealing hose, air pump and pressure gauge Key Features Available from 110L to 1650L effective capacity. Stated tank volumes do not include the extra wall height needed to secure the lid when the tank is full. Tanks can contain their stated volume of wine. Up to 290L tanks have a 17mm wide lid flange, larger tanks have a 42mm flange 110L & 220L tanks have 3/4" FNPT bottom port, 290L, 650L & 1100L Tanks have a 1.5 in TC Fitting, 1650L equipped with 2 in TC port. Liter scale on tank exterior View the resource
$1,219.99
-
Kreyer Chilly Max 90 | Glycol Chiller/Heater | 3 Ton | 36,000 BTU Cooling Capacity | 230V 3 Phase
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Cooling & heating in one premium quality unit Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system Four locking casters offer ease-of-mobility when moving the unit around the winery 3 Ton / 36,000 Btu cooling capacity 230V, 3 Phase power Made in Germany by Kreyer Cooling and Heating in one unit! Every Winemaker can appreciate the benefits of precise temperature control during all stages of production. This mobile unit allows you to easily control your ferment temperatures, heat your tanks during winter to expedite Malo-Lactic fermentation, or cold-stabilize your white wines. This unit can be used as portable unit in a larger winery or as a fixed system supplying a glycol loop in a smaller winery. Unit is used for heating or cooling but cannot supply both at the same time. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Note: This unit runs off 230V 3 phase power. It will not run off 208V. Uses: Cooling of must for cold soaks, slow starting ferments Heating up must after a cold soak period Cold Stabilization of tartaric crystals Controlling fermenting temperatures through cooling or heating Maintaining storage temperatures in tanks/barrels Check out these features: Cools or Heats 3 Tons (36,000btu) of cooling power (larger Chilly Max's are available) .85 Tons of heating power Can cool glycol/water bath down to -10C/14F or up to 42C/107F 230v 60Hz 3 phase supply voltage drawing 19.3 amps Rolls on four locking casters Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing 7 Gallon Insulated Plastic glycol/water reservoir Easy to fill from outside Evaporator coil made of stainless steel High-quality Grundfos recirculation pump Built in pressure switch shuts down recirculation pump when not needed Digital Thermostat Lifting/Crane Hooks for transport All panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius. 33"L x 25"W x 31.5"T Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note: This unit REQUIRES 230 v Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. Available in larger sizes. For additional product options View the resource.
$21,999.99
-
Kreyer Chilly Max 50 | Glycol Chiller/Heater | 1.8 Ton | 21,840 BTU Cooling Capacity | 230V Single Phase
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive inventory. Cooling & heating in one premium quality unit Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system Four locking casters offer ease-of-mobility when moving the unit around the winery 1.8 Ton / 21,840 Btu cooling capacity 230V, Single Phase power Made in Germany by Kreyer Cooling and Heating in one unit! Every Winemaker can appreciate the benefits of precise temperature control during all stages of production. This mobile unit allows you to easily control your ferment temperatures, heat your tanks during winter to expedite Malo-Lactic fermentation, or cold-stabilize your white wines. This unit can be used as portable unit in a larger winery or as a fixed system supplying a glycol loop in a smaller winery. Unit is used for heating or cooling but cannot supply both at the same time. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Note: This unit runs off 230V single phase power. It will not run off 208V. Uses: Cooling of must for cold soaks, slow starting ferments Heating up must after a cold soak period Cold Stabilization of tartaric crystals Controlling fermenting temperatures through cooling or heating Maintaining storage temperatures in tanks/barrels Check out these features: Cools or Heats 1.8 Tons (21,840btu) of cooling power .85 Tons of heating power Can cool glycol/water bath down to -10C/14F or up to 42C/107F 230V 60Hz Single phase Power supply Required Rolls on four locking casters Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing 7 Gallon Insulated Plastic glycol/water reservoir Easy to fill from outside Evaporator coil made of stainless steel High-quality Grundfos recirculation pump Built in pressure switch shuts down recirculation pump when not needed Digital Thermostat Lifting/Crane Hooks for transport All panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius. 33"L x 25"W x 31.5"T Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note: This unit REQUIRES 230 v Single Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. Available in larger sizes. For additional product options View the resource.
$12,949.99
-
Kreyer Chilly Max 90 | Glycol Chiller/Heater | 3 Ton | 36,000 BTU Cooling Capacity | 230V Single Phase
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more inventory. Cooling & heating in one premium quality unit Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system Four locking casters offer ease-of-mobility when moving the unit around the winery 3 Ton / 36,000 Btu cooling capacity 230V, Single Phase power Made in Germany by Kreyer Cooling and Heating in one unit! Every Winemaker can appreciate the benefits of precise temperature control during all stages of production. This mobile unit allows you to easily control your ferment temperatures, heat your tanks during winter to expedite Malo-Lactic fermentation, or cold-stabilize your white wines. This unit can be used as portable unit in a larger winery or as a fixed system supplying a glycol loop in a smaller winery. Unit is used for heating or cooling but cannot supply both at the same time. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Note: This unit runs off 230V single phase power. It will not run off 208V. Uses: Cooling of must for cold soaks, slow starting ferments Heating up must after a cold soak period Cold Stabilization of tartaric crystals Controlling fermenting temperatures through cooling or heating Maintaining storage temperatures in tanks/barrels Check out these features: Cools or Heats 3 Tons (36,000btu) of cooling power (larger Chilly Max's are available) .85 Tons of heating power Can cool glycol/water bath down to -10C/14F or up to 42C/107F 230 v Single Phase Power Supply Required Rolls on four locking casters Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing 7 Gallon Insulated Plastic glycol/water reservoir Easy to fill from outside Evaporator coil made of stainless steel High-quality Grundfos recirculation pump Built in pressure switch shuts down recirculation pump when not needed Digital Thermostat Lifting/Crane Hooks for transport All panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius. 33"L x 25"W x 31.5"T Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note: This unit REQUIRES 230 v Single Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. Available in larger sizes. For additional product options View the resource.
$17,999.99
-
IBC Tank | Stainless Steel | Forklift Base | 1000L
Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation, and transportation Designed with a palletized base, built-in forklift channels, and a sturdy galvanized cage for easy movement and stacking up to 2-high Made from high-quality 304 stainless steel, ensuring durability and a hygienic environment for fermenting or aging beverages Lid features a 1.5" T.C. ferrule, allowing for the addition of a spunding valve, CIP spray ball, or other accessories Full draining bottom outlet with a 1.5" T.C. butterfly valve for efficient liquid transfer Also available with an optional cooling jacket Stainless steel IBC tanks provide a reliable solution in beverage making for storage, mixing, fermentation and transportation. Crafted from high-quality 304 stainless steel, these tanks ensure an airtight, hygienic environment that preserves the quality of both raw ingredients and finished beverages. The built-in forklift channels and robust outer cage make them easy to move around your facility, even when full, and allow them to be stacked on top of each other 2-high. These tanks feature a wide 15.75" lid opening with a 1.5" tri-clamp ferrule in the lid, allowing you to add a spunding valve for fermentation or CIP spray ball for cleaning. The 1.5" T.C. bottom outlet includes a stainless steel butterfly valve. Stainless steel IBC tote 1,000 L / 265 G / 8.5 bbl capacity 1040L / 275 G Nominal capacity (filled to brim) 2mm thick 304 stainless steel Passivated Internal BA finish External satin finish Full draining bottom with 1.5" T.C. butterfly valve Upper lid diameter: 15.75" (400mm) 1.5" T.C. ferrule in lid Palletized base with fork lift slots Galvanized cage 44.6" x 44.6" x 57.4" Please Note: Do not stack more than 2 tanks, even when empty. Only move one tank at a time. Never move stacked tanks whether full or empty. The tank must be handled by means of the forks only from the front side. Never use the forks from the side.
$5,299.99
-
EnoItalia Flexible Impeller Pump | Euro 30 | Self-Priming | 19.8 GPM | 1.5" T.C. | 110V
Coming soon! The Euro 30 is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is late summer 2026. Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs. The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%. SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 110V
$1,179.99
-
Ultimate Draft CO2 Growler
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Everything you need to have some fresh beer on the go. This ultimate growler is made from double wall, vacuum insulated stainless steel which makes it impervious to oxygen and sunlight. The included pressure lid allows you to pressurize the growler up to 30 psi with the provided mini CO2 regulator. The regulator uses 16 g threaded CO2 cartridges. Includes: 2 L stainless steel growler Pressure lid with plastic tap Mini CO2 regulator 6 CO2 cartridges Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.
$93.99
You have seen 192 out of 194 products