Pro Tank Parts & Accessories

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits all 3.5 bbl tanks. Material: Viton

Read more less

Replacement pipe clamp for MB conicals and brite tanks. The pipe clamp holds the dump port outlet pipe steady. Intended to be welded in place on the tank legs supporting cross bar.  

Read more less

Replacement foot pad for MB conicals and brite tanks sized from 20 bbl and up.  

Read more less

Replacement foot pad for MB conicals and brite tanks sized from 10 to 15 bbl.  

Read more less

Replacement foot pad for MB conicals and brite tanks sized from 3.5 to 7 bbl.

Read more less

Replacement tank manway locking handle for 3.5 bbl MB Conical Unitank Fermenter. Please Note: This replacement part is intended for unitanks produced after 2021. The diameter of the threads are M18.

Read more less

Replacement tank manway arm for MB 3.5 bbl conical fermenter.

Read more less

This clever device allows you to back fill your tank with an inert gas while cold crashing to avoid the ingress of O2 through the vacuum relief. It is normally used on a tee with a normal PRV/Vacuum Breaker. The NPT port is hooked up to a regulator and set to a low pressure. The exact setting used will depend on the volume of your head space and your regulator. Start at 2 PSI and adjust from there. A pin spanner is required for disassembly. 1.5" tri-clamp 1/2" female NPT port    

Read more less

Replacement EPDM gasket for the 1 BAR PRV featured on MB conicals and brite tanks - CON4P7.

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1 bbl is perfect for up to a 20 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1/2 bbl size for up to 10 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT. You may also want a keg cart. This brink is the same diameter as a keg but twice the height.  

Read more less

Replacement Viton gasket for the 1 BAR PRV featured on MB conicals and brite tanks - CON4P7.

Read more less

Replacement Foot Pad for MB 1 & 2 BBL Conical and Brite Tanks. M16x2mm threads.  

Read more less

Replacement dome port tri-clamp for MB 2 bbl conicals & brite tanks.  

Read more less

Replacement dome port tri-clamp for MB 1 bbl conicals & brite tanks.  

Read more less

2.5" DIN wrench for MB conical fermenters and brite tanks.  

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits all 3.5 bbl tanks.  Material: EPDM

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits 5 bbl and above.  Material: EPDM  

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. 1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1/4 bbl is perfect for up to a 5 bbl batch with most yeasts. Also available in 1/2 bbl size for up to 10 bbl batches and 1 bbl size for up to 20 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT.  

Read more less

This replacement rubber seal is for the sight glass featured on MB Brite Tanks size 3.5 bbl and above.  

Read more less

This replacement square seal is for the sight glass featured on MB Brite Tanks size 3.5 bbl and above.  

Read more less

This replacement O-ring is for the sight glass featured on MB Brite Tanks size 3.5 bbl and above.  

Read more less

This Reactor Rod was custom built to be used with the 1 bbl MoreBeer! Pro Conical Fermenter, but can easily be integrated to other vessels with a 4" tri-clamp top port. Unlike other in-solution cooling coils on the market, the Reactor Rod utilizes a straight vertical design. Without all the curves and bends of a cooling coil, it is easier to scrub and sanitize the unit prior to setup and after use. The four cooling rods are 32" long measured from the bottom of the T.C. fitting.

Read more less

This is a premium black neoprene jacket, tailor-made for the 2 bbl MB Conical Fermenter. Made from 6mm neoprene with black fabric on both sides. Perfect for insulating the conical and using alongside our Reactor Rods.  

Read more less

This is a premium black neoprene jacket, tailor-made for the 1 bbl MB Conical Fermenter. Made from 6mm neoprene with black fabric on both sides. Perfect for insulating the conical and using alongside our Reactor Rods.  

Read more less