Racking & Transferring Wine

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025.   Replacement air tubes for variable capacity tanks. 75 cm tube fits LA Inox 600 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

Use Nitrogen or Argon for flushing tanks or pushing wine from kegs for topping up barrels or serving Perfect for serving still wine, cold brew coffee, Sangria and premixed cocktails on draft Can be filled with Nitrogen, Argon, or Beer Gas Mix Brand new, high-strength aluminum tank with CGA580 valve Ships empty—fill at a welding shop or swap at your local beer & winemaking supply store Brand new aluminum 22 cubic feet Nitrogen tank made from high strength aluminum alloy and high quality CGA580 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. This is the tank you need for flushing vessels or pushing wine from kegs using either Nitrogen or Argon. Gas flushing is a very useful process for giving added protection to wines by helping to minimize contact with oxygen in your storage containers. Also, wine stored in kegs for either topping up barrels or for serving should be pushed with Nitrogen or Argon rather than CO2 to prevent adding carbonation to your wine (unless you want all your wines to be sparklers!). Generally speaking, we recommend using Argon instead of Nitrogen around your winery, mainly because it is denser than air and so is much more effective when it comes to flushing vessels. Though it is more expensive than Nitrogen, we feel that the added expense is worth it when it comes to protecting our wines. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls DOT approved New high quality CGA-580 valve Light weight compared to steel tanks Rated to 2216 PSI service / 3360 PSI test pressure PSI (allowing for Nitrogen fill) Can also be filled with Argon or Beer Gas Mix (Nitrogen/CO2) NOTE: You will need at Nitrogen/Argon Regulator to go with this tank, a standard CO2 regulator will not work.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025. Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%.  SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 220v bare cord  - You will need to wire on the appropriate 220v plug  Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.    

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Replacement air tubes for variable capacity tanks. 100 cm tube fits Marchisio 1000-2000 Liter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

For siphoning out of small jugs and growlers. Comes with 3/8" cane. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. 15" racking tube. Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage.

Read more less

Replacement air tubes for variable capacity tanks. 90 cm tube fits LA Inox 800-1000 Liter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 14.4 g.p.m. (54.5 l.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.039 gallons (0.15 lit.) Maximum Particle Size .................... 3/32" dia. (2.4 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75.0 db(A) Dimensions .................................... 10" W x 10 7/8" H x 6 23/32" D

Read more less

Used primarily in aeration and oxygentation systems that call for 1/8" ID line. 3/16" OD.  

Read more less

Replacement air tubes for variable capacity tanks. 115 cm tube fits LA Inox 1850 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

Replacement air tubes for variable capacity tanks. 125 cm tube fits LA Inox 2000 Liter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 10.6 g.p.m. (40.1 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.022 gal (0.083 lit) Maximum Particle Size .................... 1/16" dia. (1.6 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 72.7 db(A) Dimensions .................................... 7 31/32" W x 9 5/16" H x 5 23/32" D

Read more less

These quick disconnects feature 3/8" barbed fittings which can be used with 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n.   This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.

Read more less

The Straight Barb Fitting is an optional replacement to the Elbow Barb Fittings that come standard on the Super Transfer Pump (H308).

Read more less

This ForgeFit silicone hose bumper protects your fittings and the brewery floor from damage from constantly picking up and dropping the hose end. It also holds the end off the floor to keep it from getting contaminated, and has two large handles so you don't have to grab a hot hose to move it. 2" ID to stretch over most 1.5" brewery hoses.  

Read more less

Plastic quick disconnect with 3/8" barb which can be used with either 1/4", 5/16" or 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch on the female QD. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The o-ring is food grade buna-n. This is a non-valved QD. It does not have an internal shut-off like H550A. For the female side, see our H550B.

Read more less

Replacement air tubes for variable capacity tanks. 120 cm tube fits 120 cm diameter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

These 0.2 Micron Air Filters have a fine enough filter membrane that they can filter out microbes and bacteria. They can be used with any oil free air compressor such as a pond pump, or other type of pump. They can also be used as an airlock in the top of your fermenter or used to filter air going back into a cask when dispensing real ale.  This filter is not suitable for liquids and should be discarded if it gets wet. Compatible with 4 mm ID EVABarrier tubing. You will need to heat up the tubing and use needle nose pliars to widen the inner diameter. No hose clamp required. Specs: 0.2 Micron Pore Size PE Membrane Suitable for 3/16" ID tubing KegLand Part Number: KL08587    

Read more less

This ForgeFit silicone hose bumper protects your fittings and the brewery floor from damage from constantly picking up and dropping the hose end. It also holds the end off the floor to keep it from getting contaminated, and has two large handles so you don't have to grab a hot hose to move it. This bumper requires some forceful stretching to get over the 1.5" TC fitting. 1.49" ID to stretch over most 1" brewery hoses.

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 12 g.p.m. (45.4 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.039 gal (0.15 lit) Maximum Particle Size .................... 3/32" dia. (2.4 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75 db(A) Dimensions .................................... 7 11/16" W x 11 21/32" H x 6 23/32" D

Read more less

Heavy-duty, elliptical rotor, roll-in crush pad pump Ideal pump for moving must or whole berries with little to no liquid Stainless steel pump body with 3" tri-clamp connections Hinged stainless door for inspection and cleaning Made in Italy by EnoItalia Gamma pumps are heavy duty, elliptical rotor, stainless steel pumps designed to move must from your destemmer to your fermentation tanks or bins. They are often referred to as Roll-in Crush Pad Pumps because they are on wheels and slide directly under your destemmer crusher.  While rubber impeller pumps can be made to work for this purpose impeller pumps are not as good in situations where there is very little liquid. Examples would be when you are trying to process whole berries or processing very small berry cabernet sauvignon. Gamma pumps are also softer on the fruit than an impeller pump.  Elliptical Crush pad pumps are professional solutions. The Gamma 80 works with either our Jolly40 or Jolly60 while the Gamma180 works with the Jolly100.  Features: Stainless steel pump body Stainless Receiving hopper with screw 5.5 HP/4kW Motor Requires 3 phase, 220v, 60 Hz Power Up to 25,000 lbs/12,000kg pumped per hour Max Pressure: 21.7 PSI (1.5 BAR) Shaft speed: 47/58 rpm 3 in Tri Clamp connection fitting Up to 15 ft / 4.5 m discharge height Up to 90 ft / 27.4 m discharge distance Hinged stainless door for inspection, cleaning Automatic refillable lubricator Please Note:  This unit REQUIRES 220V Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

Self-priming must pump with variable flow control from 0 to 100 gallons per minute Flexible rubber impeller gently pushes must and wine Stainless steel pump head with 3" tri-clamp connections Remote control operation with 30 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The Euro 60 Flexible Impeller pump is a 3" T.C. self-priming pump with a Stainless Steel head, controlled via a frequency inverter that allows for flow control from 0 - 100 gal / minute.  These units can be controlled via the remote control on a 30' cord, or from the control panel mounted on the pump itself.  Pumps are reversible, self-priming up to 15', and can be used with wine, juice, or must. The wheeled pump cart allows for easy movement and maneuverability around the winery or crushpad, and stainless steel construction insures that it'll survive through hectic wine seasons!  Completely food grade components have no impact on the quality of the wine, and a low shear value due to the larger TC fittings. This pump is a true all around winery pump because it can be used with must and wine. If you have a commercial crush pad with a larger destemmer crusher like a Jolly40 or above, and you process small berries, you will want to consider the Gamma 80 as it works better with dry fruit (lots of skin and not as much flesh).  However the Euro60 works well with most musts and then can be your work horse to move must and wine in the winery, making it a great value you can use year around. Although the Euro 60 is self-priming, the pump should never be run dry. Features: Stainless steel head with flexible rubber impeller Gear reduction for increased low speed torque Stainless steel cart Remote control  Flow rate from 0 to 100 gpm Flow is reversible Max Pressure: 33 PSI (2.3 BAR) 3" Tri-Clover inlet and outlet 4KW/5.3HP motor Will work with 208v or 230v Single Phase Power 14 amp draw Recommended temperature range: 40 - 150°F (5 - 65°C) Made by Enoitalia of Europe Please note: the unit will arrive with a bare power cord. You will need an electrician to wire the appropriate plug.  

Read more less