Hands down a necessity. These function flawlessly for a year or so before they break. The tip always cracks and no longer seats on the tube. Fortunately these are cheap. If they made this in stainless you'd never have to buy another one...

So much so I ordered an extra one ( they are cheap) in case I break my main one mid-bottling or transfer.

This is perfect for quick easy non-stressful bottle or growler fills for sharing from my kegged beer. I like the smaller diameter as it fits all bottle sizes.

The good: this wand makes bottle filling quick and easy. The liquid flows fast (almost too fast) and the spring closes with minimal dripping. The bad: I could not get the hard plastic top to connect to my bucket spigot. I tried hot water and still no luck. Finally had to cut a short piece of silicone tube from my other bottling wand in order to make the connection.

Needed a replacement works flawlessly!

I attached this directly onto the outlet of my plastic bottling bucket's; no hose was used. Worked perfect!

This will fit right up to the spigot on my bottling bucket a MoreBeer plastic bucket without the need for tubing. This allowed me to set it on the countertop and fill one handed. Spring is a little stiff but that's not a bad thing as I had little to no drips between bottles.

A bit of a beer bottling disaster the first time through. This wand would not connect to the bottling bucket spigot the nylon connector is too rigid ot useful. After pulling it off I added 6 inches of 5/16" tubing to connect spigot directly to rigid wand tube works quite well now.

Perfect and good quality! Go Giants!

Works great for what it was designed for. It was shipped promptly

Yep that's what it's worth a million bucks! Really makes bottling fun and easy. Slips easily onto the siphon hose when bottling and back off easily when transferring between carboys. Golden piece of cake easy peasy. Buy it!

Fills bottles so easy without a mess. Highly recommended

I used my new bottle filler soon after it arrived and was pleased with the way it performed. No leaking like I've had with others in the past. It made filling two cases of bottles fairly quick and efficient.

Love the versatility of this unit. It has a fitting on the top that allows you to attach it on a party tap dispenser and fill bottles. You can also remove the bottom tip and fill bottles and growlers using your party tap. One thing about it when it arrived I couldn't get it apart. I just warmed some water in the microwave and soaked the bottom end about 2 minutes and off she came.

Works like a charm no more leaks while filling bottles better that the last one i had.

A must have piece of equipment. I always have two or three extra. For some reason I always lose the spring

Easy to use quite convenient especially after working at a commercial brewery every day

Inexpensive and works great!

Easy to use easy to clean leaks a little but not a big deal. Not hard to pull apart. Helps quick fills.

Really like the new bottle filler plumbed it for my sanke kegs . Works great to do up a few bottles or growlers .

One of the best inexpensive useful and easy to use and clean. Besides filling bottles quickly and easily without oxygenating during the fill this is an efficient racking device instead of using plastic tubes that have a permanent bend and are harder to maneuver when transfering the wort from kettle/carboy to carboy. I use it to rack from my primary fermentation carboy to my secondary by easily attaching it to my spigoted carboy. The glass tube is easy to sanitize and the tip with pin and spring detach in a snap to also clean and dry. I have loved mine for 3 years and it still looks new. A must!

I can't even imagine a better or easier way to fill bottles from a bottling bucket. It's easy to clean and sanitize too.

Leaks a little but haven't found one that doesn't.

Works great but I don't think the spring is made from ss. Would be a five star review if the spring was ss.

I don't know how I got the old bottle filler I had but getting this one made bottling days so much easier. No more leaks better control while filling and so easy to take apart and clean. Great buy

I watched some home brewing videos where I saw this product and just knew I needed it. The spring loaded "on/off" for the flow makes going from bottle to bottle simple and no mess! If you are not kegging you NEED this as a part of your home brew tool kit!

This gadget works great for filling beer bottles but if you got wine bottles with a deep "punt" it won't work

if you are bottling then buy this. This has helped out with so many batches of beer I cant remember. Wouldn't bottle with out it.

Starts when you push down and stops when you lift up. Doesn't drip. Does exactly what it is supposed to do.

The tip has a couple removable parts that need to be cleaned after each use. Don't loose the tiny spring! I would have given this product 5 stars but after about a year it's started to develop a small drip. Still works but it's a bit messy.

Works great as advertised!

Works great for bottling beer. Dribbles a little from time to time but seems to be well made with a strong enough spring to shut off the flow.

Bought this to replace my old bottle filler - it would leak and fill slow. I have bottled 2 batches with this one and so far I have not been disapointed