Stainless Steel Tri-Clamp Fittings & Valves
-
Stainless Tri-Clamp | 1.5" T.C. x 3/4" Female BSPP
Convert 3/4" BSPP (Straight Thread) fittings to 1.5" Tri-Clover. Often used on 20x20 plate filters, where the stock 3/4" barbed inlet and outlet fittings are replaced with these to convert to 1.5" Tri-Clover. Use along with our H928 o-ring to form a seal on the straight threads.
$28.99
-
ForgeFit® Tri-Clamp Gasket | Silicone | 2"
Silicone gasket for 2" tri-clamp connection. Temperature rated from -58°F to 446°F.
$1.99
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 2" x 1.5"
2" x 1.5" tri-clamp concentric reducer. Made from 304 stainless steel.
$32.99
-
ForgeFit® Stainless Tri-Clamp Rotating Racking Arm | 2"
Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 14" allowing you to draw from roughly 10" above or below the valve level. The arm measures 13.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. Manufactured from 304-type stainless steel with a polished finish. 2" tri-clover connection.
$89.49
-
Stainless - 2.5" T.C. x 2" T.C. Concentric Reducer
Concentric Reducer from 2.5" to 2" clover clamp. 304-type stainless steel.
$35.49
-
Stainless - 2" TC x 2" Barb
Convert 2" tri-clover fitting to 2" long barb for connection of tubing. 304-type stainless steel.
$27.49
-
Stainless - 1.5" TC x 3/8" Barb
Convert 1.5" Clover to 3/8" Barb for connecting 3/8" ID Tubing.
$17.99
-
ForgeFit® Stainless Tri-Clamp Sight Glass | 1.5"
1.5" tri-clamp sight glass. Made from 304 stainless steel. Completely disassembles for easy cleaning. Approximately 6.25" long.
$73.49
-
ForgeFit® Tri-Clamp Gasket | Teflon | 2"
Teflon gasket for 2" tri-clamp connection. Temperature rated from -100°F to 500°F.
$3.99
-
ForgeFit® Tri-Clamp Gasket | EPDM | 3"
EPDM gasket for 3" tri-clamp connection. Temperature rated from -30°F to 300°F.
$1.99
-
ForgeFit® Stainless Tri-Clamp End Cap | 2"
End cap for 2" tri-clamp fittings. Made from 304 stainless steel.
$6.49
-
1.5 in. TC x 1.5 in. Barb (Short Stem)
Convert 1.5" Tri-Clamp to 1.5" Barb for connection of 1.5" ID tubing. 304-type stainless steel. 1.5" long stem.
$21.99
-
Stainless - 1.5" T.C. x 1" FPT
Convert 1.5" Tri-Clover to 1" Female Pipe Thread. 304-type stainless steel.
$21.99
-
ForgeFit® Tri-Clamp Gasket | Silicone | 3"
Silicone gasket for 3" tri-clamp connection. Temperature rated from -58°F to 446°F.
$1.99
-
3 Piece Stainless Ball Valve - 1.5 in. T.C.
Stainless steel 3-piece ball valve with tri-clamp connections. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1.5" tri-clamp connection or accessory. Full port for higher flow rate.
$32.99
-
Gasket for 1.5 in Butterfly Valve
Replacement interior gasket for H661 Butterfly Valve.
$12.49
-
Tri-Clamp 90 Elbow (2")
304-type polished stainless. A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the winery when connected.
$25.49
-
ForgeFit® Tri-Clamp Gasket | Silicone | 2.5"
Silicone gasket for 2.5" tri-clamp connection. Temperature rated from -58°F to 446°F.
$1.99
-
BrewBuilt® CIP Spray Ball | 1.5" T.C.
BrewBuilt CIP Spray Ball for use with X-Series Uni Conicals or any stainless steel fermenter with 1.5" tri-clamp fittings. The head emits a 360° fan spray that cleans above and below the spinning ball. The sharp spray easily removes soil inside your tank. The long neck design allows the spray ball to reach through tall fittings and ferrules. With a welded 90° elbow inlet, you won't have any trouble with kinked hosing slowing your pump flow and lowering the spray ball's performance. A pump capable of 30-45 psi and 11 GPM is recommended for this product to provide a high pressure cleaning radius of 3.6 ft.
$87.99
-
ForgeFit® Stainless Tri-Clamp Hose End | 3" Barb x 3" T.C.
This ForgeFit oversized barb hose end is intended for use with professional beverage tubing. 3" tri-clamp connection with 3" OD barb.
$58.49
-
ForgeFit® Stainless Tri-Clamp Tee | 1.5"
304-type stainless steel tri-clamp tee with 1.5" clamp ends.
$29.99
-
Tri-Clamp Thermowell
1.5" Tri-Clamp end cap welded to thin wall stainless tubing for quick accurate temperature readings. Insert 1/4" thermal probe from controller. Works perfectly with our Ranco digital controllers. Thermowell mounts into 1.5" Tri-Clamp ferrule in the side or your tank. Has a 6 inch probe. Works with new 2016 Rancos
$32.99
-
Stainless Tri-Clamp Weldless Bulkhead - 2 in.
Add a 2" tri-clamp port to any tank or lid with this 304 stainless steel weldless bulkhead. Just drill a 45-47 mm hole and tighten this item to your vessel wall. For distilling purposes, this is perfect if you want to fit an extension tube between the BrewZilla / DigiBoil distillation lid and the copper pot or reflux still. Kegland Part Number: KL10979
$32.99
-
Stainless Tri-Clamp Ferrule | 1.5" T.C.
Stainless - 1.5" TC Ferrule. Used to weld in a TC connection anywhere you need one! Total Length: 1 3/32" Inner Diameter: 1 13/32". AiSI304 Stainless Steel.
$9.89
