Detecting your location...
Beer Making

Ss Brewtech Keg WaSsher

    Description

    The Ss Brewtech Keg WaSsher offers the homebrewer a convenient way to clean any classic Cornelius-style kegs (Corny or other similar variants).  To operate, simply remove the keg’s lid, tilt and insert the spray ball attachment into the keg’s lid opening, and then rotate the keg to secure the lip against the WaSsher’s silicone baseplate seal.  Secure the locknut and snug the entire assembly down.  Attach the two ball lock quick disconnect fittings to the gas-in and liquid-out postsensuring there are no kinks in the silicone tube.  Lastly, turn your keg upside down and put the entire assembly into a standard 5-gallon bucket that contains 2 gallons of your preferred cleaning solution, then activate the pump.  Now go grab a beer and relax while the Keg WaSsher does the rest. 

    No need to disassemble or remove QD posts, dip tubes, or other fittings, all parts are cleaned in place.  No more extra-long scrub brushes or elbow grease.  Since we designed this washer to fit inside a 5-gallon bucket, you can easily clean kegs in batches by setting up a wash station with 3 discrete buckets to perform cleaning, fresh water rinse, and acid sanitizer cycles.  All while leaving the washer attached to a single keg, just jump from one bucket to next until the keg is cleaned, sanitized and ready for use.  Since the Keg WaSsher only requires 2 gallons of cleaning solution, the result is less chemical waste and less environmental impact than traditional cleaning methods.

    Features:

    • Hands free operation
    • Chemical resistant submersible pump
    • Attaches to common ball-lock Cornelius-style kegs w/ removable lids
    • Powerful CIP spray ball
    • Entire assembly fits in 5-gallon bucket
    • Cleans inside of keg and ports simultaneously
    • Easily attaches/detaches from kegs
    • Perform clean, rinse, and sanitize steps all with the same unit

    Ss Brewtech Keg WaSsher

      Product form

      SKU: KEG322

      $249.95

      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        WARNING : This product can expose you to chemicals including Di-n-butyl phthalate (DBP), which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        The Ss Brewtech Keg WaSsher offers the homebrewer a convenient way to clean any classic Cornelius-style kegs (Corny or other similar variants).  To operate, simply remove the keg’s lid, tilt and insert the spray ball attachment into the keg’s lid opening, and then rotate the keg to secure the lip against the WaSsher’s silicone baseplate seal.  Secure the locknut and snug the entire assembly down.  Attach the two ball lock quick disconnect fittings to the gas-in and liquid-out postsensuring there are no kinks in the silicone tube.  Lastly, turn your keg upside down and put the entire assembly into a standard 5-gallon bucket that contains 2 gallons of your preferred cleaning solution, then activate the pump.  Now go grab a beer and relax while the Keg WaSsher does the rest. 

        No need to disassemble or remove QD posts, dip tubes, or other fittings, all parts are cleaned in place.  No more extra-long scrub brushes or elbow grease.  Since we designed this washer to fit inside a 5-gallon bucket, you can easily clean kegs in batches by setting up a wash station with 3 discrete buckets to perform cleaning, fresh water rinse, and acid sanitizer cycles.  All while leaving the washer attached to a single keg, just jump from one bucket to next until the keg is cleaned, sanitized and ready for use.  Since the Keg WaSsher only requires 2 gallons of cleaning solution, the result is less chemical waste and less environmental impact than traditional cleaning methods.

        Features:

        • Hands free operation
        • Chemical resistant submersible pump
        • Attaches to common ball-lock Cornelius-style kegs w/ removable lids
        • Powerful CIP spray ball
        • Entire assembly fits in 5-gallon bucket
        • Cleans inside of keg and ports simultaneously
        • Easily attaches/detaches from kegs
        • Perform clean, rinse, and sanitize steps all with the same unit
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 9.8 lb

        Recently viewed products

        © 2026 MoreWine

          • American Express
          • Apple Pay
          • Bancontact
          • Diners Club
          • Discover
          • Google Pay
          • iDEAL Wero
          • Mastercard
          • Shop Pay
          • USDC
          • Visa

          Login

          Forgot your password?

          Don't have an account yet?
          Create account