Products

This counterflow heat exchanger is an absolute beast when it comes to chilling wort. Made from passivated 304 stainless steel, The Beast has a 30 ft. wort line with 1.5" T.C. connections and a 29.5 ft. coolant line with 1/2" male BSPT connections. The wort line is 1/2" ID so the chiller can withstand high amounts of hop additions without clogging. A mounting bar is welded to the chiller so you can mount it under your work bench or to the frame of your brewing system if desired. Specs: Beer Line: 30 ft. long Beer Connection: 1.5" tri-clamp Coolant Line: 29.5 ft. long Coolant Connection: 1/2" BSPT Crossbar with pre-drilled mounting holes (4mm) Made from 304 stainless steel

Read more less

BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 2.5" Stem is a perfect balance of being long enough to get accurate readings, while not protruding far enough to get hit by a wandering mash paddle or spoon. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 2.5" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

Read more less

BrewBuilt Bi-Metal Thermometers are top-of-the-line measuring instruments, made in the USA by Tel-Tru manufacturing.  Maintain the overall precision of your brew system with these incredibly accurate and generally superior thermometers.  These are produced according to strict standards, comparable to ISO9000 quality, and are set up with an 8 year manufacturers warranty boasting that quality. Bi-metal thermometers are the level of quality you want when a few degree difference results in a completely different malt profile on your beer.  While a bit more expensive, you won't ever mess up a batch because of incorrect temperature readings.  The 6" Stem here is perfect for Mash Tuns, as it will reach further into the mash to get a more representative reading. Are all bi-metal thermometers created equal? Not really. The problem with most bi-metal thermometers is that hang ups occur and you have to tap the thermometer to get an accurate reading. The cause of the problem is that the bimetallic helical coil in the stem of other bi-metal thermometers is tack welded to the stem itself. Our new line of thermometers feature a super sensitive bimetallic helical coil suspended from a copper coated bushing fixed in the stem. This superior design provides a faster response to temperature changes and assures more accurate readings. What does this mean? You don't have to tap the gauge with your finger as much. They are also accurate to 1% of the total range, feature a polished 3" 304 s/s housing, a hermetically sealed water proof case, glass face, external calibration capabilities, and a unique anti-parallax dial that provides for easy reading. The reading is actually taken from the last 2.5" of the probe. Features: Large 3" Dial Face for easy readings 6" Stem perfect for Boil Kettles and HLTs High Grade Stainless Steel Construction and hermetically sealed casing Can be calibrated with 1/16" Allen Wrench (Though should never be needed) Dual Scale Range: 0-220° F, -10 to 100° C Back Connection is 1/2" MPT, stem is 1/4" SS 8 year Manufacturer Warranty  

Read more less

This unique thermowell fitting is has the probe offset from the center of the fitting, leaving room for additional hardware such as the BrewBuilt Whirlpool Return Fitting. Pairing the two fittings allows you to recirculate wort in your boil kettle while still getting temperature readings from your thermometer or temperature probe. The thermowell has a 6" probe that fits all BrewBuilt kettles so that you can get the most accurate temperature measurement of your wort.  

Read more less

Multi tier brew system. Requires less space and features an innovative tipping mash tun for easy cleaning. Digital Touchscreen Controller comes standard. Control every aspect of your brew day from a single screen Automatic HERMS mashing. Set up to five mash steps in the digital controller and temperatures will be raise and be maintained automatically Powerful Gas Burners. Whether you choose Propane or Natural Gas as your fuel source, your burners will be fast, efficient, quiet and have great flame control. The Ultimate Sparge Arm. Eliminate hot side aeration with this fully adjustable sparge arm. Built to order in the USA. Every system features a custom-welded stainless steel frame manufactured in the BrewBuilt metal shop. Famous for its innovative tipping mash tun, the Tippy Dump BrewSculpture allows you to easily dump spent grain after mashing. Place a garbage can on the built-in step, tip the mashtun and you're done—no heavy lifting or scooping necessary! A Tippy Disc is welded directly to the kettle, allowing the mash tun to be locked in place when vertical and then to be rotated and locked in at different angles as you empty and clean the mash tun. The Tippy Dump system includes a built in flip-down stainless step giving you easy access to see into the mash tun. Inspired by professional brewpub brewhouses, which are designed to fit in tight spaces, the mash tun is placed directly over the hot liquor tank. This not only saves space but also allows for heat coming off the hot-liquor tank to help keep the mashtun warm during the mash. Touchscreen Control Panel From heating strike water to whirlpooling hop additions, you’ll orchestrate your entire brew day from our custom designed 7” touchscreen control panel. Unlike other systems, all of the heating elements and pumps can be controlled from a single touchscreen controller. Program your mash steps and the controller will do the rest—cycling heating elements and kicking on pumps to recirculate wort as needed. It also offers programmable delayed start so you can heat your strike water in advance, boil addition timers to remind you when to add hops or clarifiers, as well as manual control of your pumps and linear power control of the electric elements. Control Panel Key Features: Programmable HERMS Mash Steps - choose from 3 preset mash schedules or custom design your own with up to 5 steps. From there the control panel guides your mash through the temp raises and time rests automatically. Always Hot - Controller maintains the Hot-Liquor tank temperature you choose by turning the burner off and on automatically. Auto Sparging - Sparge water flow is controlled automatically with an integrated Mash Tun float switch Timer Alarms - Built in boil timers remind you when to add hops, finings, or anything else Manual Mode - allows you to control pumps manually for anything you want such as cleaning. Automatic HERMS Mashing Mash temps are maintained via the HERMS coil made from convoluted copper tubing. This top-of-the-line coil design offers unparalleled efficiency while gently heating your wort. Choose from your saved mash schedules or program one on the fly. When the mash begins, the controller will automatically maintain the temperature of the hot liquor bath that the HERMS coil rests in. When the wort temp drops below your set point, the controller will turn on the pump to circulate wort through the coil. You can also set the pump to continuously circulate wort for the whole mash if you prefer, and the HLT will continue to maintain your mash temp automatically. When each mash step is complete, the controller will raise the temperature of the HLT and begin the next step. The HERMS coil can also double as your wort chiller when the boil is over and quickly cools wort thanks to the twisted pattern of the copper tubing. Powerful Gas Burners Choose your fuel source! Natural Gas is a nice option for the brewer whose home is already supplied with natural gas. This is a convenient option since you will never have to refill propane tanks, and you will never run out of gas mid batch. However, you do lose the freedom to move your BrewSculpture™ once it has been hard plumbed to your gas line. Whether you prefer the mobility of using propane or the reliable supply of natural gas, your burners will be fast, efficient, quiet and have great flame control. The Ultimate Sparge Arm No other system protects against hot side aeration quite like the BrewSculpture. While other systems simply pump wort back to the top of the mash tun and let it splash back down over the grain bed, the Ultimate Sparge Arm will make sure your wort circulates with virtually zero aeration. The Ultimate Sparge Arm features adjustable height and adjustable flow. Depending on what beer you’re brewing, the surface of the mash will be at different heights. Simply lower the sparge arm to just below the surface of the mash and your recirculation will be splash-free. The ball valve at the inlet of the sparge arm allows you to dial in the flow and reduce turbulence as you see fit. Custom Welded Frame Made in the USA Every BrewBuilt BrewSculpture is made to order and built around a custom TIG welded 304 stainless steel stand. While other companies cut corners by using generic stainless steel tables for their systems, our extra beefy stand is fabricated in our California-based metal shop and designed to outlive even you. Every stand comes with rolling casters and folding handlebar so you can easily move your system with ease whenever needed. What Sets the Digital BrewSculpture Apart? Only system with a heavy-duty, purpose-built, welded stainless frame as standard. Only system with rotating mash tun to easily dump spent grains Only system with digital touch screen as standard. Only system with programmable mash steps on touch screen.  Only system using top-of-the-line convoluted coil (HERMS) for the quickest temp increases while still being gentle. Only system with an oversized Hot Liquor Tank to speed up brew day. Welded fittings for a lifetime of easy-to-clean, leak-free performance. Ultimate Sparge Arm reduces hot side aeration. Keep sparge water warm while preheating the boil. Key Features of Tippy-Dump BrewSculptures Made in USA by BrewBuilt 304 Stainless Steel TIG welded stands. The ultimate frame material that will outlast you. No paint or powder coating. Every BrewSculpture includes folding handles and built-in rear casters that allow you to move your BrewSculpture with ease. Oversized 304 stainless BrewBuilt Kettles with welded fittings, notched lids, internally etched volume markers, aluminum clad bottoms, and silicone handles. Built to last. Our "Large" option will come with 22 gallon kettles, while the "XL" model will come with 30 gallon kettles. The fluid path is easy to use and clean. We've included the time tested, top of the line March pumps along with heat resistant food-grade silicone tubing and our own specially designed stainless quick disconnects. Burners are fast, efficient, quiet and have great flame control. Mashtun includes the Ultimate Sparge Arm with innovative design to eliminate hot-side aeration. The center draw outlet with quick disconnect is locked in during mashing but easily disconnects for cleaning. The mash screen has a very low volume of base water under the screen to aid with efficiency and mash consistency. The perforated stainless mash screen is reinforced for use with pump recirculation and includes a silicone gasket to make a perfect seal with the kettle wall. Internally etched volume markers make mash water additions super easy. Boil Kettle includes innovative Whirlpool maker for leaving hops and trub behind. Volume markers are etched on the inside so you know exactly how much wort you have at all times. The lid notch is super handy for hanging hop bags, using an immersion chiller, etc., but when not is use an included silicone plug seals the notch. The bottom of the boil kettle is tri-clad with a 4 mm aluminum core sandwiched between two layers of 304 stainless. The aluminum core eliminates scorching and the cleaning that comes with a scorched kettle. Includes all of the tubing you'll need with: 2 x 40 in. Hoses with male and female quick disconnects 90 in. Hose with male and female quick disconnects 32 in. Hose with 1 female quick disconnect and 1 open end Dimensions / Specifications: Stainless Frame measures 50" L x 22.25" W x 62" H Requires 110/120V power source   Please Note:  Natural Gas Sculptures require installation by a professional plumber. These units terminate in a ¾” Male Flare connection, and have multijet burners as opposed to the banjo style displayed in the pictures above.  

Read more less

Kettle Maximizer allows you to pull liquor or wort from below the depth of your kettle's bottom port Angle straight down in hot liquor tanks to maximize pick up Rotate to your preferred pick-up height in boil kettles to leave trub behind when transferring to fermenter The tri-clamp maximizer is recommended for boil kettles and hot liquor tanks with 1.5" T.C. bottom ports. This fitting will allow you to pull liquor or wort from below the depth of your kettle's bottom port without the need to tip your vessel. For hot liquor tanks, point the end of the tube straight down to maximize pick up. For boil kettles, you can rotate the maximizer to position the end of the tube at your preferred height above the bottom of the kettle, leaving room for a layer of trub that will be left behind in the kettle when you transfer wort to your fermenter. 1.5" tri-clamp Tube Length: 6.5" Overall Length: 8.18" Made from stainless steel

Read more less

The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Adjustable from 0.3–14.5 psi Made from 304 stainless steel 11.75" H x 4" Ø   For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.

Read more less

Made specifically for whirlpooling, this fitting angles ricrculating wort along the kettle wall for a more efficient whirlpool effect Doubles as a kettle maximizer, allowing you to pull wort from below the depth of your kettle's bottom port Rotate to your preferred pick-up height in the kettle to leave trub behind when transferring to fermenter Compatible with kettles 12" in diameter and larger This unique tri-clamp fitting works perfectly for whirlpooling hops at the end of the boil and doubles as kettle maximizer when transferring out to your fermenter. When recirculating wort through the bottom port, wort will be returned to flow along the kettle wall for a more efficient whirlpool effect, drawing vegetal matter into the center of your kettle. When transferring wort out, the fitting will then pull from the side of the kettle where matter has been cleared, and by angling the end of the tube downwards, you'll be able to pull liquid from below the depth of your kettle's bottom port without the need to tip your vessel. 1.5" tri-clamp Length from T.C. to tube bend: 7" (approx.) Length from tube bend to outlet: 9" (approx.) Made from stainless steel

Read more less

Recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. The BrewBuilt Whirlpool Return Fitting & Thermowell Offset kit allows you to use any tri-clamp kettle's thermometer port to recirculate wort while also taking temp readings. This kit is perfect for kettles that only have two tri-clamp ports—eliminating the need to drill out a hole in your kettle to add a third port for wort recirculation. Attach your preferred valve or tri-clamp fitting to the side inlet and, during whirlpool, draw wort from your bottom port and pump it back through the Whirlpool Return Fitting. Kit Includes: Whirlpool Return Fitting Thermowell Offset (1) 1.5" Tri-Clamp (1) 1.5" Tri-Clamp Gasket (EPDM)

Read more less

The BrewBuilt Whirlpool Return Fitting allows you to recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. Install it in any tri-clamp kettle's thermometer port and attach your preferred valve to the side inlet. The front of the fitting can be capped off with a 1.5" T.C. end cap, or you can pair with the BrewBuilt Thermowell Offset to install a thermometer or temperature probe.  

Read more less

Keep your fermentation temperature stable by pairing the BrewBuilt X-Series Uni Conical with one of these silicone heaters. Designed to wrap around the conical portion of the tank, these pads will gently heat your fermenter from the bottom up to keep your yeast comfortable and working hard. A must-have for brewers living in colder climates or if you want the peace of mind that you can ferment ale or kveik strains no matter the time of year. Having a conical heater also comes in handy if you chilled your wort below yeast pitching temperature and want to warm it back up before pitching. We always recommend pairing the heating pad with a temperature controller so it will only be powered on as needed. A dual stage temperature controller like the Inkbird is a great option for controlling both heating and cooling with a BrewBuilt CoolStix™. Compatible with all X-Series Conicals including the new X3! Notes: For warmer climates, go one size down For colder climates, go one size up Safety Shut off: Stops at 120°F Excess heat after flocculation can cause off-flavors from autolysis 3M brand adhesive back for permanent installation Tested by our in-house engineers, we created a recommendation chart to help you choose the heater that best suits your batch size. X1 Conicals: Watts 7 Gal 14 Gal 25 Gal 38 Gal Min. Circumference Top Curve Length 40 Fits Fits Fits Fits 21.6" 20.1" 80 Recommended Fits Fits Fits 29.3" 27.8" 120 X Recommended Fits Fits 35.6" 34.1" 240 X X Recommended Recommended 46.75" 45.25" 500 X X Fits Fits 57.9" 56.4"   X2 Conicals: Watts 7 Gal 14 Gal 25 Gal 38 Gal Min. Circumference Top Curve Length 40 Fits Fits Fits Fits 21.6" 20.1" 80 Recommended Fits Fits Fits 29.3" 27.8" 120 X Recommended Fits Fits 35.6" 34.1" 240 X X Recommended Recommended 46.75" 45.25" 500 X X X X 57.9" 56.4"   X3 Conicals: Watts 7 Gal 14 Gal 25 Gal 38 Gal Min. Circumference Top Curve Length 40 Recommended Fits Fits Fits 21.6" 20.1" 80 X Recommended Fits Fits 29.3"

Read more less

Go mobile with this heavy-duty caster set for the BrewBuilt X-Series Uni Conical. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing, give your back a break and upgrade your X-Series Conical with a set of rolling casters. Simply remove the thread-in adjustable feet from your conical and replace them with the casters. The set includes two locking and two non-locking wheels. In general, we recommend putting the pair of locking wheels at the front of the conical.  

Read more less

Add dry hops without introducing oxygen to your fermenting or finished beer! Load hops into the Hop Bong, fill it with CO2 via the ball lock cap, and pull the PRV to release oxygen This is the perfect accessory to protect your finished beer from oxygen ingress when it's still in the fermenter 6 oz capacity per "hop drop"—easily repeat the process if you just gotta have More! Compatible with all BrewBuilt X-Series fermenters and any stainless conical with 1.5" T.C. top port The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. This kit is specifically adapted for use with the BrewBuilt X-Series conical fermenters and can be used with any stainless fermenter with 1.5" tri-clamp top port. The 2" T.C. Hop Bong attaches to a stainless 2" butterfly valve that then connects to a 2" x 1.5" T.C. reducer. This allows the largest capacity Hop Bong to be used with any of the 1.5" T.C. accessory ports on the BrewBuilt Conical's lid. Hop Pellet Capacity: 150–180g (5.2–6.3 oz) Kit Includes: 2" Hop Bong Stainless Ball Lock Cap Red PRV & PCO1881 Cap Combo 2" BrewBuilt Butterfly Valve 2" x 1.5" Tri-Clamp Reducer (3) 2" Tri-Clamps (3) 2" T.C. Gaskets Warning: Always depressurize your system COMPLETELY before removing fittings from your fermenter.

Read more less

Replacement neoprene jacket for the BrewBuilt X2 Jacketed Uni conical. Not compatible with the X3 Jacketed Uni conical, X2 non-Jacketed Uni conical, or X1 Uni conicals.

Read more less

What sets the BrewBuilt X2 Series apart: Highest quality mirror finish. Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation. Four crossbar reinforced legs are superior for stability, mimicking Pro Uni Tanks. Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more.   Pressure Relief Valve with pull ring built into the lid. 2" oversized bottom port and Butterfly Valve. Coolest accessory upgrades like Pressure Pack with Floating Dip Tube, clear Flex Chamber trub collector, Coolstix, Kit for Pressure Fermentation etc. Read more Below! The BrewBuilt X2 Uni Conical was born of thousands of hours of research, contemplation, and development. The engineers and critical minds behind its realization scoured years of feedback from home and professional brewers alike to determine the ideal feature set of a stainless steel conical fermenter. And where standard features fell short, we pushed the boundaries into new territory never before seen on a premium conical fermenter. The end result is a unit purpose-built to advance your fermentation process, improve the quality of your finished beer, and look good doing it. This is the brewing sidekick that you’ll brag to your friends about. We guarantee that you will love the fit and finish of the X2 Uni Conical. Made entirely of 304 stainless steel, the quality exceeds what has previously been done in brewing applications and approaches the level of pharmaceutical-grade finish. With flawless welds and a dazzling mirror-polish finish inside and out, the BrewBuilt X2 Uni is easy to sanitize and even easier on the eyes. You’ll probably wanna snap a pic. #BrewBuilt Extra Large 2” T.C. Dump Valve Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 2" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Trub Separator and Yeast Harvester. Reinforced Four-Leg Foundation There’s a common complaint seen in the feedback for other conicals on the market—the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X2 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X2 conical exceedingly stable when compared to other models.  When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintop that they wanted stronger, sturdier legs right out of the box that don’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so can easily glide the fermenter around your brewery.  The reinforced four-leg design not only increased the stability and strength of the conical, it also allowed the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare. Adjustable Feet The X2 Uni comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time. Other Features You’ll Love: Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off Internally etched volume markers in gallons and liters Stainless steel lid clamp with single-piece molded silicone gasket In our X2 redesign we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons Optional Upgrades The base model X2 Uni allows you to purchase the conical at the most affordable price and upgrade as you go. All of the accessories included with the X2 Uni+ can be purchased separately, so you can start fermenting now and come back later to add features and improve your process. Flex Chamber - Trub Separator & Yeast Harvester The pressurizable Flex Chamber attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Pressure Pack with Clear Float Technology The Pressure Pack features a unique floating racking tube that can be used for taking samples, keg transfers, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened. Glycol-ready X-Series CoolStix™ Drop in the X-Series CoolStix for an easy-to-use, innovative solution for maintaining fermentation temps. Fits perfectly with the Pressure Pack's 1.5" T.C. port, or you can replace the Uni's 4" T.C. port with a 4" to 1.5" T.C. reducer. Cycle cooling solution through the CoolStix using either an IceMaster Glycol Chiller or a BrewBuilt Chiller Pump Kit placed in ice water. We highly recommend adding the Neoprene Jacket to help keep the conical insulated and improve cooling performance. CoolStix are designed for fermentation temperature control. Glycol-ready Ludicrous Coil The Ludicrous Coil offers unparalleled performance for an in-solution cooling apparatus and is highly recommended for brewers that want the top-shelf option with the highest cooling capacity. Aside from normal temperature control, when paired with a glycol unit, the Ludicrous Coil has the ability to chill beer down to cold crash temperatures. Pair with an IceMaster Max 2 and Neoprene Jacket to unlock the Ludicrous Coil's cold crashing capabilities. Not necessary for all brewers, but a significant upgrade over the CoolStix! BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X2 with an active fermentation) The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual.  Hop Bong Oxygen-Free Dry Hopping Device The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. High Roller Caster Set Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters. X2 Uni Conical Features: 304 stainless steel construction Mirror polish finish Interior welds are the best in the business - uniquely ground and polished  (3) Horizontal welded cone ports (1) 4" TC Lid Opening (2) 1.5" TC Lid Openings 2" TC bottom dump with 2" TC butterfly valve 1.5" Thermowell for inserting thermal probe Strong welded in place handles  (4) Adjustable feet Silicone tube for blow off Stainless lid clamp & one piece molded gasket Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations) Internally etched volume markers Specs:    

Read more less

The BrewBuilt X2 Conical Lid comes with one 4" T.C. port and two 1.5" T.C. ports. This is a direct replacement to the lid that comes standard on the X2 Uni, but X1 Uni owners can also upgrade to this lid if they want to take advantage of the second 1.5" port. This extra port is great for adding hops or other flavor additions without needing to remove and reinstall the Blowoff U Barb or other accessories attached to the primary 1.5" port. Also features a pull ring PRV built into the lid. The 25/38 gal size will fit X1 28/42 gal fermenters. NOTE: The lid does not include clamps, gaskets, or other fittings seen in the example photo. The PRV will come pre-installed and all other ports will come bare.

Read more less

No Need to Upgrade Later, The X3 Comes Fully Loaded: Built-in external cooling jacket with 1.5" TC Ports Neoprene jacket for insulation Pressure Pack lid with floating dip tube, draft style QD connections for sampling/serving, and an extra 1.5" TC for hop bongs. The Clear Flex Chamber Bottom Dump allows you to see fermentation, collect and remove trub, and has added ports for purging, oxygenating, carbing and more... so flexible. Highest quality mirror polish finish inside and out Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation New Features: Professional 8” Tri-Clamp lid replaces the need for a complicated band clamp to attach the lid Four crossbar reinforced legs, that flare out, create the most stable base and more access to the front fittings and dump system Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more 3" oversized bottom port and Butterfly Valve with 3” tri-clamp Flex Chamber collection vessel The new X3 from BrewBuilt sets the new standard for quality. We guarantee that you will love the fit and finish of the X3 Uni Jacketed Conical. Made entirely of 304 stainless steel, with flawless welds and a dazzling mirror-polish finish inside and out that is simply the best. The BrewBuilt X3 Uni is easy to sanitize and even easier on the eyes. It is definitely Instagram worthy!  #BrewBuilt External Cooling Jacket When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The BrewBuilt X3 Jacketed Conical offers maximum cooling power without any compromise of sanitation.  8” Tri-Clamp Top Port New to the X3, the 8” Tri-Clamp lid is rock solid and easy to use. The 8” opening allows plenty of space to still get in and clean the inside of the conical by hand if desired. A unique 8”, three-piece, tri-clamp is used to make sealing the top very easy and very secure.    Extra Large 3” T.C. Dump Valve The largest in the industry. Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 3" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Collection Jar and Yeast Harvester. Reinforced Four-Leg Foundation There’s a common complaint about the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X3 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X3 conical exceedingly stable when compared to other models.  When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery. The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare. Adjustable Feet The X3 Jacketed Conical comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time. Flex Chamber Collection Jar - Trub Separator & Yeast Harvester Working in collaboration with KegLand, we developed the pressurizable Flex Chamber Collection Jar. It attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 3" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation. Pressure Pack with Clear Float Technology Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened. Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind. Other Features You’ll Love: Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off Stainless steel lid clamp with single-piece molded silicone gasket In our GEN 3 redesign, we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons X3 Accessories: BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X3 with an active fermentation) The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual. Hop Bong Oxygen-Free Dry Hopping Device The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. High Roller Caster Set Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters. IceMaster Max 2 Built to pair perfectly with the IceMaster Max 2 glycol chiller. Easily and efficiently control your fermentation temperature and cold crash for conditioning and clarifying. Pair with our BrewBuilt Insulated Tubing Kit that comes complete with premium quick disconnects with shutoff valves that provide a “dry break” when they’re disconnected. Immersion Heater The X3's cone features a 2" tri-clamp port specifically for installing an Immersion Heater. The low watt density heating element gently warms your fermenting beer without scorching. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year. Full List of X3 Conical Features: External Cooling Jacket with 1.5" Tri-Clamp connections Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down. Flex Chamber Collection Jar, a clear, pressure capable bottom jar that allows you to see fermentation, remove trub, and connect additional accessories Neoprene insulation sleeve Wide base with 4 legs for stability 304 stainless steel construction Mirror polish finish Interior welds are the best in the business - uniquely ground and polished  (1) 2“ TC port for direct immersion heaters (3) Horizontal welded cone ports (1) 8" Lid Cap Opening with 8” TC Clamp (5) 1.5" TC Lid Openings 3" TC bottom dump with 3" TC butterfly valve 1.5" Thermowell for inserting thermal probe (4) Adjustable feet Silicone tube for blow off Stainless 8” Three Piece Tri Clamp & one piece molded gasket Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations) For volume and dimensional specs, click here. Installation Note: The Pressure Pack's Clear Float floating dip tube is sized to fit all models of the BrewBuilt Conical. Depending on the size of your fermenter, you may need to shorten the silicone tube for better performance. When installed on your empty fermenter, you ideally want the dip tube to hang freely with just enough length for the end of the dip tube to touch the bottom of the tank.

Read more less

The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is so compact that it only takes up about 12" of extra space next to your conical. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

Read more less

The X3 Jacketed Conical and IceMaster Max 4 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 4 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling With room to connect up to 4 conicals, this package is perfect for brewers planning to expand their fermentation capacity over time Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 4? This powerful glycol chiller has more than enough cooling capacity for your chosen X3 Conical with room to add an additional three fermenters down the road. X3 Jacketed Uni Conical & IceMaster Max 4 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 4 makes for the perfect tag team partner, providing all the cooling capacity you'll need for up to four fermenters. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet.

Read more less

The X3 Jacketed Conical and IceMaster Max 2 work hand in glove from yeast pitching to cold crashing External cooling jacket with neoprene insulation allows for unparalleled temperature control for a homebrew fermenter Max 2 glycol chiller with digital controllers and built-in submersible pumps provides quiet and efficient chilling Insulated tubing sets eliminate line sweating and feature dry break quick disconnects at the cooling jacket connection points High-quality, stainless steel table with rolling casters saves space in your brewery and can be easily moved whenever needed The BrewBuilt Ultimate Chilling package includes everything you'll need to maintain a precise level of temperature control throughout the fermentation process. The X3 Jacketed Conical is second-to-none in homebrew-level cooling capabilities—mirroring the fermenter design that professional brewers have long relied on to keep their temperatures in check. And what better unit to provide the cooling solution than the IceMaster Max 2? This low-profile glycol chiller provides all the cooling capacity you'll need and is compact enough to ride shotgun on the included stainless steel work table. X3 Jacketed Uni Conical & IceMaster Max 2 The X3 Jacketed Uni Conical offers cutting edge design features that have long been reserved for pro-level fermentation tanks. Circulating cooling solution through an external cooling jacket offers superior cooling power when compared to internal cooling coils, and eliminates the need for cleaning a wonky apparatus after you've transferred out your finished beer. This pressurizable fermenter also sports a neoprene jacket for added insulation, Flex Chamber collection container for yeast harvesting or trub dumps, internal floating racking tube for clear beer transfers, and so much more! The IceMaster Max 2 makes for the perfect tag team partner, providing all the cooling capacity you'll need for small-volume batches. And with two built-in submersible pumps with independent controllers, you can always add a sidekick fermenter and control both batches simultaneously. BrewBuilt Insulated Glycol Tubing Kit In addition to the conical and chiller, the kit also includes an insulated tubing set that improves chilling efficiency and eliminates line sweating. The kit consists of: 1 - Insulated Tubing Set (2 x 6' lines) 2 - High Temp Plastic Female QDs w/ 3/8" Barb* 2 - High Temp Plastic Male QDs w/ 1/2" MPT* 2 - 1.5" Tri-Clamps 2 - 1.5" T.C. Gaskets 2 - 1.5" T.C. x 1/2" FPT Adapters *These premium quick disconnects feature shutoff valves that provide a "dry break" when they're disconnected. That means no cooling solution leaking all over your brewery every time you take the system apart for cleaning. The Female QDs are installed on the insulated tubing, and the Male QDs are installed on the T.C. x FPT Adapters that connect to the cooling jacket's inlet and outlet. Stainless Steel Work Table The heavy-duty stainless steel work table is the final piece that makes this the Ultimate Chilling Package. Saddle up the X3 Conical and IceMaster Chiller to reduce the footprint of your brewery. And with the swivel rolling casters installed, you'll have easy mobility to move your setup if ever needed.  Please Note: Avoid moving the table while the Conical is resting on top or in use. This can lead to injury or damage to the conical and surrounding area. The table cannot accommodate the 25 or 38 gal X3 conicals.

Read more less

Replacement clamp for the BrewBuilt X3 Uni Conical 8" tri-clamp lid. This 3-piece stainless steel tri-clamp features two hinges which makes the clamp easier to work with on larger fitting sizes.  

Read more less

Replacement tri-clamp lid gasket for the BrewBuilt X3 Uni Conical. Compatible with all sizes of X3 via 8" tri-clamp connection. Not compatible with X2 or X1 Uni Conicals.

Read more less

Replacement neoprene jacket for the X3 Uni Conical fermenter. Not compatible with X2 or X1 Uni Conicals.

Read more less