Detecting your location...
Stainless Steel Tri-Clamp Fittings & Valves

BrewBuilt® Tri-Clamp Spunding Valve | 1 BAR | 0.3–14.5 PSI

    Description

    The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.

    • Adjustable from 0.3–14.5 psi
    • Made from 304 stainless steel
    • 11.75" H x 4" Ø

     

    For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.

    Read more

    BrewBuilt® Tri-Clamp Spunding Valve | 1 BAR | 0.3–14.5 PSI

      Product form

      SKU: CON4P36

      $179.99

        Free Shipping on orders over $59

        WARNING : This product can expose you to chemicals including Bisphenol A, which is known to the State of California to cause female reproductive harm. For more information, go to www.p65warnings.ca.gov.

        You're getting the best possible deal on this item, thanks to our Minimum Advertised Price (MAP) policy.

        Description

        The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process.

        • Adjustable from 0.3–14.5 psi
        • Made from 304 stainless steel
        • 11.75" H x 4" Ø

         

        For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.

        Read more

        You Might Also Need

        ForgeFit® Stainless Tri-Clamp | 1.5
        ForgeFit® Stainless Tri-Clamp | 1.5" Clamp
        $7.99
        ForgeFit® Stainless Tri-Clamp Tee | 1.5
        ForgeFit® Stainless Tri-Clamp Tee | 1.5"
        $29.99
        ForgeFit® Stainless Tri-Clamp Elbow | 90° | 1.5
        ForgeFit® Stainless Tri-Clamp Elbow | 90° | 1.5"
        $24.99
        ForgeFit® Tri-Clamp Gasket | Silicone | 1.5
        ForgeFit® Tri-Clamp Gasket | Silicone | 1.5"
        $1.99
        Tri-Clamp Spunding Valve | Replacement Sealing Ring
        Tri-Clamp Spunding Valve | Replacement Sealing Ring
        $3.29
        Replacement Reservoir for Tri-Clamp Spunding Valve
        Replacement Reservoir for Tri-Clamp Spunding Valve
        $18.99
        ForgeFit® Tri-Clamp Gasket | EPDM | 1.5
        ForgeFit® Tri-Clamp Gasket | EPDM | 1.5"
        $1.99

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account