Best Sellers - Last 30 Days
-
Duotight BlowTie 2 | Diaphragm Spunding Valve | Built-In Pressure Gauge | 0-15 PSI | 8 mm Duotight
The Blow Tie Spunding Valve is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. 8 mm Duotight fittings at both inlet and outlet make this unit perfect for use with EVABarrier 8 mm OD tubing (D1717 or D1718). The BlowTie 2 features an integrated pressure gauge so you can quickly and easily dial in your pressure setting. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Specifications: Made from food grade acetal Stainless screws Easily disassembles for cleaning 8mm (5/16") Duotight fittings at both ends Interchangeable pressure gauge Gauge reads from 0-15 psi WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Kegland Part number: KL15042
$21.99
-
Continuous Soda Carbonator Keg Lid
Nothing is more refreshing that having your own soda water on tap at home. SodaStream units are great but filling up those tiny 1L bottles is a pain and those small CO2 cylinders run out fast and are expensive to swap. Solve this problem once and for all with the Continuous Soda Carbonator Keg Reactor Solution. KegLand has invented this really easy-to-use keg lid that attaches to a standard ball lock keg. Setup: Position the keg inside your fridge or kegerator (ideally below 40°F). Attach your beverage draft line to the soda water out post. Attach your gas line to the gas-in post. Set your CO2 regulator to 30-50 psi, depending on how highly carbonated you like your soda water. We highly recommend using a check valve on your CO2 line. On first use, purge the air from the headspace of the keg. Connect the mains water to the water inlet post on the lid of the keg. We recommend also using a check valve on your mains water line to prevent soda water from going back into your house mains. Depending on your mains water pressure, you may need to reduce it using the Duotight In-Line Regulator. For the Carbonator Keg Lid to work well, the mains water pressure should be 10-15 psi higher than your regulator set pressure (from Step 4). That's it. This simple unit will give you continuous soda water connected to your mains water. Please note: if you are using a CO2 regulator that uses a corny-style PRV, such as the KOMOS® regulator, you will need to swap out the standard Green PRV with the 0-100 psi Gray PRV so you can raise the pressure above 60 psi. Always check the pressure rating of your keg(s) before swapping the PRV. KegLand Part Number: KL10955
$76.99
-
Cannular Pro Bench Top Can Seamer | Semi Automatic Can Seamer | 16 oz 202 Can Compatible | Adaptable for 32 oz Crowlers
Semi-Automatic Precision: Delivers a consistent, professional-grade seal in just 3 seconds, eliminating manual lever variability and operator error. Universal Versatility: An adjustable platform fits standard 202 cans (12–16 oz) and can be adapted for 32 oz Crowlers or tin-plated food cans. Durable & Safe Design: Built with rust-resistant 304 stainless steel and a low-voltage 24V DC motor for maximum safety in wet environments. Compact Efficiency: A space-saving benchtop unit designed for easy one-person operation, making it ideal for homebrewers and nano-breweries alike. Superior Freshness: Provides an airtight, 100% light-proof seal to prevent oxidation and keep your beverage carbonated longer than traditional bottling. Power supply sold seprately. See below under You Might Also Need. The Cannular Pro is a semi-automatic can seamer that is easy to use, reliable, and beautifully simple. Whether you're a brewery looking to offer canned beer to go or a homebrewer wanting to keep your creations fresh and fully protected from light, the Cannular is the answer. This bench top unit is one of the most compact and easy to use can seamers you'll find. The Cannular only requires one person to operate, and each can takes roughly 3 seconds to seam. With a two-person team, one filling and one seaming, the Cannular becomes a suitable option for nano breweries doing small canning production runs. The Cannular Pro guarantees a perfect, repeatable seal by automating the seaming process. By eliminating the manual lever, it removes operator variability and ensures consistent pressure for every can. Key Features Semi-Auto Precision: Effortless operation that delivers a uniform, professional-grade seam every time. Universal Compatibility: Designed for all standard 202 cans, including 12 oz, 16 oz, 330 ml, and 500 ml sizes. Adjustable Platform: Features a built-in adjustable table to accommodate various can heights—no additional spacers required. Customizable Pressure: Easily fine-tune the platform height to ensure the ideal amount of sealing pressure for any batch. The Cannular Pro can be adapted for use with 32 oz Crowlers (Ball 300 can/end). To seam Ball 300 end/lid type oversized aluminum cans you will need to purchase the required Chuck for 1L (32 oz) Crowlers separately (coming soon). The Cannular Pro can also be adapted for use with Tin Plated Steel Cans for food packaging applications. The table spacer is designed to accept these 100mm cans, but you will need to purchase the required 100mm Chuck separately. Operation: The beauty of the Cannular lies in how truly simple it is to operate, and the semi-automatic pro model makes canning beer even easier. With only three points of operation, it only takes a few minutes to familiarize yourself with the machine. The seaming process is as follows: Place lid atop the can and place the can on the table spacer Turn the platform lever clockwise to raise the can to the seamer Press the seaming operation button then wait for the can to stop spinning Turn the platform lever counterclockwise to lower the can That's all there is to it! Construction: The Cannular was designed to be compact, durable, and safe to operate in a wet environment. The platform assembly is made from 304 grade stainless steel, so no matter how messy your canning gets, there's no need to worry about rusting or degradation. The body of the unit is made from hammered sheet metal and fastened together with stainless steel screws. Rubber feet help keep the unit from slipping and sliding while in use. In addition, the Cannular features built-in brackets near the feet so you have the option to mount the machine to your counter or benchtop. The Cannular runs off of 24V DC power via the Anderson socket located on the back. This lower voltage was chosen specifically to make the unit as safe to use in a wet environment as possible. Power: As noted above, the Cannular comes with a 24V DC Anderson socket located on the back of the unit. It does not, however, include a cord and plug. This unit uses the more powerful Pro Model Power Supply, which provides enough power to seam tin plated steel cans as well as aluminum cans. Why Cans? So why can when you can bottle? There's no doubt that canning has become a more and more popular format for packaging beer among craft breweries over the last several years, and with good reason. Aluminum cans aren't just more environmentally friendly than bottles, since cans require less energy to transport and recycle, they're also much better at protecting the quality of the beer. Whereas bottles allow in light, which leads to skunking, aluminum cans offer 100% protection from UV and other wavelengths of light that are harmful to beer. There's still great debate surrounding whether cans or bottles are better at keeping beer fresh, but if done correctly, cans are theoretically the superior option. When a crown cap is crimped onto a bottle, the lining of the cap can form an imperfect seal on the bottle, allowing small amounts of oxygen in, as well as small amounts of CO2 out. Over time this can result in oxidation of the beer and lost carbonation. Seamed cans, on the other hand, form a much better seal that can prevent these issues. Of course, it's important to make sure that the can is purged of oxygen before being filled, and that the can lid is sealed atop foam to eliminate oxygen from the headspace. Aside from all the "sciency stuff", cans are just plain safer. Take your beer backpacking, camping, or poolside and rest assured that broken glass won't ruin your day! Specifications: Power: 250W 24V DC Rated Speed: 3300 RPM Gearbox Ratio: 9.8 : 1 Dimensions: 16" L x 9.5" W x 21" H Weight: 40 lbs Splash guard not included Max Can Height: 7.75" (197mm) Please note the pictured splash guard is not included with the seamer. Please see CAN106 to add the splash guard to your order. Please note: When you receive your cannular the rollers have been set and tested at the factory. They should not need adjustment for 100,000 cans when using only Can Fresh brand cans. We recommend testing at least 4 cans to verify the calibration. The table, however, comes unadjusted and getting it set up correctly is very important to getting a proper seal. Cannular's test show that a minimum 0.4mm (.015") actual overlap is needed to seal to 90 PSI. The proper table tension takes a little practice and you can expect to waste a few cans getting it dialed in. Once you learn the proper tension re-adjusting it is very quick and easy. You want the tension to be tight but not so tight as to dent the can. Use cans at your fill height with water for proper tension adjustment. KegLand Part Number: KL15769 Cannular Compact Semi-Auto Canning Machine | User Guide
$749.99
-
Reagent Refill for Vinmetrica ABV Kit
The ABV Refill Reagent Kit contains all solutions and supplies necessary to complete 25 tests. Includes: Oxidant (0.062M Potassium Dichromate/2M Sulfuric Acid) ABV Titrant ABV Developer Solution Starch Indicator Solution Calcium Hydroxide (Ca(OH)2), neutralizer and sequestrant) 100uL Pipette Tips (Set of 25)
$149.00
-
KOMOS® Outdoor Kegerator Cover
The KOMOS waterproof kegerator cover is perfect for outdoor use. The front panel can be lifted independently so the kegerator door can be opened without removing the whole cover.
$49.49
-
Duotight Flow Stopper Automatic Keg Filler
Use the Duotight Flow Stopper while filling kegs, during keg to keg transfers, or fermenter to keg transfers to automatically cut off the flow when the keg is full. Simply attach this device to the output gas post of your keg, then when the keg is full it will prevent further liquid exiting the gas post. The Flow Stopper pairs perfectly with the BlowTie Spunding Valve, which will enable you to apply head pressure to the keg. This allows you to control the flow speed and reduce the foam generated in the filling process. You will need a short length of 8 mm OD EVABarrier tubing to connect the BlowTie to the outlet of the Flow Stopper. Includes: 2 x Duotight 8 mm x 5/8" FPT (DUO104) 1 x Duotight 8 mm elbow (DUO107) 1 x Duotight 8 mm x 1/4 in. flare (DUO106) 1 x Ball float 1 x Stainless spring 2 x 8 mm OD EVABarrier joiners 1 x Acrylic sight glass Ball lock fitting and BlowTie spunding valve not included. Kegland Part number: KL09393
$16.49
-
Weldless Stainless Steel Heating Element
A powerful, 304 stainless steel heating element well suited for most kettles. With its weldless design and a diameter of 1.25", it's easy to install. Simply drill a 1.25" hole in your kettle and tightening the nut from the outside. The heating element requires a power cord which can be purchased separately. Electrical connection requires a computer power connection IEC320 C13 to your 110 or 220 v plug). Available in either 1600 watt 110 volt or 2200 watt 220 volt. Features: Food grade, high temperature silicone seal The element itself is 11.5" long, 0.75" diameter Designed for use with 5 gallon batches Please Note - Having electrical devices around liquid can be hazardous, and should not be left unattended. Please use caution while using this device, and read the instruction manual prior to use. Use the 1.25" Hole Saw to drill a hole for this product. Kegland Part number: KL03513
$60.99
-
Submersible Pump - 5 gal.
This is a submersible pump is perfect for use with a glycol chiller or icebank. It has a small, compact design but can still push up to 800 gallons per hour. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs. We recommend this pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons. Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4" High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord Temperature rating: 1-35 degree Celsius
$32.99
-
Lallemand | LalBrew® Windsor British Style Ale Yeast | Dry Beer Yeast
Quick Starter and Fermenter. Can complete fermentation in 3 days above 17°C (63°F). Estery aroma, the fruitiness of which is generally attributed to a Full-bodied English Ale. This strain has moderate attenuation and low flocculation, which (as always) can be improved through cooling your beer post fermentation. *See the technical data sheet below for information on rehydration, usage and storage.
$6.99
-
Vienna Malt - Viking Malt
3.2-4.3 ° L - Viking Malt - Subtle flavors, including maltiness, some sweetness and hints of caramel aromas. Well suited for relatively pale colored beers.
$2.79
-
Roasted Barley - Briess Malting
220 L - Briess Malting - Contributes color and rich, sharp flavor characteristic of Stouts and some Porters. Impacts foam color.
$3.59
-
Biscuit Malt - Dingemans Malting
19-27 °L - Dingemans Malting - Dingemans Biscuit - This toasted malt will provide a warm bread or biscuit flavor and aroma and will lend a garnet-brown color. Use 5-15% maximum.
$4.39
-
KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | High Temp Plastic | 5 GPM | 25 Watt
This magnetic drive pump is a perfect pump for your brew system. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade food-grade heat-resistant SPS. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. Optional stainless steel pump head upgrades available—standard stainless center inlet head or stainless inline tri-clamp head. Want More! power? Check out this pump's bigger brother, the 60-Watt MKII. Features: 110v/60hz Max Head: 11.15 ft. (3.4 m) Max Flow: 5 Gal/min (19L/min) 1/2" BSP fittings Rotatable pump head Max temperature - 248 F/ 120 C Water resistant (not proof!) casing Kegland Part Number: KL05470
$87.99
-
Mexico Chiapas | Green Coffee Beans
Experience the smooth and balanced profile of our Mexico Chiapas, Wet Processed green coffee beans. Grown in the lush highlands of Chiapas, these beans offer a comforting cup with chocolate sweetness and a delicate, pleasing acidity. Cupping Notes: Flavor: Expect a smooth, chocolatey sweetness reminiscent of milk chocolate and cocoa nibs, complemented by a delicate, citric acidity akin to mandarin or orange. Subtle notes of caramel and toasted almonds add depth and complexity. Body: A smooth, medium-bodied texture with a clean, satisfying finish. Aroma: Fragrant aromas of cocoa, caramel, and a hint of citrus zest. Origin: Chiapas, Mexico Altitude: Typically 1200-1700 meters Varietal: Typica, Bourbon, Caturra, Maragogipe Process: Wet Processed (Washed)
$8.99
-
Maris Otter Malt - Thomas Fawcett Malting
2.7 °L - Fawcett Malting - Maris Otter has long been the favorite of English brewers for its brewhouse performance and rich, slightly nutty flavor. An excellent malt for any English beer style. All of Fawcett’s Maris Otter malt is still produced in their traditional floor malting fashion. Typical Malt Analysis: Moisture % 3.0 FGE (dry)% 80.5 Color (L) 2.3-3.0
$3.99
-
Floor Malted Bohemian Pilsner Malt - Weyermann® Specialty Malts
2 L - Weyermann® - An excellent Pilsner grain that has been malted in the traditional Bohemian fashion. Floor Malted Bohemian Pilsner is a slightly under-modified malt, with a complex malt flavor. We definitely recommend adding this into your next Pilsner recipe! Approximately 1.5-2.4° L in color.
$4.19
-
Stainless - 1.5" Tri-Clamp Sight Glass - (1" ID)
This is a clover clamp sight gauge with a one inch inside flow for placement inline during transfer of wort from kettle to fermenter. In our own system we will use it to monitor flow and to see how our inline oxygenator is flowing. Silicone Seat seals glass and withstands high temperatures. The maximum pressure is 150 PSI, about 10 bar.
$109.99
-
Roasted Barley Malt - Bairds Malt
450-565 °L - Bairds Malt - Unmalted roasted grain, it is the backbone of a Stout. Also a good grain to make red beers with, use 2-3 oz per 5 gallons for a nice red color.
$3.99
-
Ball Lock Valve With Gauge and PRV
Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg. Notes: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure. Gauge reads 0 - 15 psi
$47.49
-
Lid Gasket for Speidel FD-Style Sealed Tanks
Factory direct replacement gasket for the top lid on Speidel's small sealed tanks. This gasket fits our tank SKUs beginning with "FD-", "BD-", and tanks BRAU710, 715 and 720. Please note: The gasket you receive may be clear instead of red due to a recent design change by the manufacturer.
$29.99
-
Corks - 2 Inch Grade 1 (1000ct)
Superior cork quality for those needing a little extra confidence for longer ageing! A standard length and diameter single punch cork in a high quality grading at a reasonable price. Corks are typically graded on a scale of 1-10, 1 being the best score, based on the degree of porousness that the actual punch of cork exhibits. Cork trees that show a higher population of worms or fungi tend to yield cork crops which are more porous. As a result, this bag of corks is of generally higher quality and has less variation between the highest and lowest quality cork in the package. These corks are harvested and punched in Portugal, like the majority of the rest of the corks available today. They are processed, sorted, prepped and packaged here in Northern California.
$1,209.99
-
Filter for 1/2 in. Solenoid Valve
This small filter should be used inline before a 1/2 in. solenoid valve to protect it from damage from particulates.
$38.49
-
Seitz Filter Sheets | 40 cm x 40 cm | 2-3 Micron | 100 Sheets
40cm x 40cm filter pads made for 40x40 plate filters. 2-3 micron pads are for general polishing of wines that do not need to be sterile filtered. Please note that all pad filters are rated 'nominal', meaning that about 90-95% of all particulate matter at the micron rating will be filtered out. There will always be a little bit of smaller material that is also filtered out, as well as some larger material that will make it through. The filters can be sterilized by in-line steam, auto-claving, dry heat, hot water or chemical methods. We choose to run Saniclean (CL27) solution through the pads followed by sterile water or a small amount of wine that is then discarded. After the solution is run through the pads, and the pads have softened, the filter will need to be re-tightened. Each pad has an entry side and an exit side, distinguishable by their different textures. The entry side is a billowy type texture, frequently called the "rough" side; and the exit side has a crosshatch pattern and is commonly called the "smooth" side. For more information on how to load filter sheets into your plate and frame filter, see our Guide to Plate Filtering. Seitz K250 40cm x 40cm 2-3 Micron
$384.99
-
Stainless - 2" T.C. x 1" MPT
Adapts 2" Tri-Clover fitting to 1" Male Pipe Thread. 304-type stainless steel.
$30.99
-
Taprite Dual Body CO2 Regulator | High Performance Primary Regulator | Independent Pressure Settings | 0-50 PSI Working Pressure | CGA320 Inlet | One Way Shutoff Valves | 5/16" Barb Outlets
Now you can have two different CO2 pressures coming from one tank. It has three main uses: Serve different beers at different pressures Serve and carbonate at different pressures Serve soda or sparkling water on one tap and beer on the other Made by Taprite in the USA, the leading regulator manufacturer, so you can be assured that the quality is good. Barbs are 5/16".
$179.99
-
Intertap® Stainless Steel Beer Faucet | Forward Sealing
The patented Stainless Steel Intertap Faucet is a forward sealing faucet that represents the most modern faucet design. It has a modular, threaded spout which can fit a variety of different attachments including a growler filler or a stout spout. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Other forward sealing faucets use a floating o-ring, which is just as sanitary but requires the o-ring to move inside the faucet body in order to seal correctly. This can become a problem as the faucet ages. Intertap faucets use a sliding shuttle that guides the o-ring into the perfect position every time. The threaded spout easily unscrews from the faucet and can be replaced by a growler filler or stout spout quickly and easily. Pour a pint and then fill a growler in no time at all. Made from 304 Stainless Steel. Kegland Part number: KL00970
$42.99
-
CellarScience® ALDC | Diacetyl Reducing Enzyme
Reduce Diacetyl production during fermentation or dry hopping with ALDC from CellarScience. ALDC, or alpha acetolactate decarboxylase, is a helpful enzyme that can be added at yeast pitching or along with your dry hops to limit the production of Diacetyl to protect your finished beer from off-flavors and reduce the conditioning time needed before its ready to bottle or keg. Commonly used to combat hop creep, the result of dry hops with trace amounts of sugar leading to additional fermentation activity, resulting in more Diacetyl production and requiring more conditioning time. Use: Available in 1 oz dropper bottle or 8 oz bettix bottle. Add to fermenter at time of yeast pitching or dry hopping at a rate of 1 dropper full per 5 gallons or 3 mL per bbl. 1 oz contains approximately 35 doses for 5-gallon batches, or enough to treat approximately 10 bbls. Additional Notes: Although commonly added to heavily dry hopped beers, using ALDC during fermentation can benefit any beer style by reducing Diacetyl production. Brewing hops all contain the naturally occurring enzyme AMG or amyloglucosidase which breaks down long chain sugars into simple sugars that yeast can ferment. The reason hop creep is a relatively new phenomenon is due to the changing ways in which hops are dried and processed. As brewers started to demand more aromatics from their hops, growers began to lower the kilning temperatures to preserve volatile oils. This led to higher levels of AMG left on the hops as well, where they were previously denatured at the higher kilning temperatures. With more AMG present on the hops, dry hopping now leads to more fermentation activity and higher levels of Diacetyl produced after the primary fermentation is complete. Although the simplest remedy to hop creep is time—waiting for the yeast to naturally clean up the extra Diacetyl—ALDC is a great way to reduce conditioning time and the risk of off-flavors in your finished beer. The recommended shelf life is 12 months from the date the package is opened.
$29.99
-
Anvil Bench Bottle Capper
The new ANVIL Bottle Capper is rugged and easy to use. From the long heavy gauge base that won’t tip over, the durable metal capping head, and the folding mast for easy storage, you won’t find a more feature rich durable capper on the market! Key Features: One Hand Operation Heavy Gauge Construction Large Free-Standing Base – Won’t Tip During Use Durable Metal Capping Head Frame Quick Folding Mast for Compact Storage Adjustable for Bottles up to 14 Inches Tall Magnetic Cap Holder
$75.99
-
Washington Merlot Wine Making Kit | Cru International
Dark and rich with complex notes of blackberries and velvety tannins Medium-bodied and dry, 13.3% ABV Great with Italian sausage pizza or Mediterranean lamb Yields 6 gallons (2 cases) of finished wine in approximately 5 weeks Includes Genuwine Dried Grape Skins to enhance color, flavor profile, and bouquet of the finished wine 2010 WineMaker International Award Winner A cooler climate style Merlot from Washington, this wine features classic flavors of cassis and chocolate. It is dark and rich with complex notes of blackberries and velvety tannins. Includes 125 g of Genuwine Dried Grape Skins. Genuwine grape skins are crushed, whole grape skins, gently dried in a proprietary process that preserves their original color and fresh vineyard flavor. Fermentation on Genuwine dried grape skins enhances the color, flavor profile and bouquet of wine. Genuwine grape skins are easy to work with and consistently provide excellent results. 2010 WineMaker International Award Winner. Food Pairings Great with Italian sausage pizza or Mediterranean lamb. Merlot, Washington Sweetness: Dry Oak: Medium Body: Medium ABV: 13.3% Kit Volume: 8L Approximate Yield: 23L Ready to bottle in 5 Weeks Grape skins included
$96.99
-
Blichmann HellFire Floor Standing Burner
Blichmann's TopTier™ burner lit the brewing world on fire in 2009 with the first burner made specifically for the needs of the homebrewer. No wonder it became the best selling and most respected homebrew burner in the market. Efficient, fast, and versatile. This new burner is appropriately named HellFire™! This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs. This custom made burner is tuned to operate in high efficiency mode, and also in a second high power mode. In the high power mode, you'll be amazed with 140,000BTU/hr output for blazing fast heating - double the power of our previous burner. And significantly more power than anything else on the market. Waiting for a boil is now a thing of the past. In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation. Plenty of power to keep a rolling boil on a 20 gal batch of beer. Even our efficiency mode has significantly more power than the competition! To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort.
$217.99
-
Stainless Draft Coil
50' x 3/8" coil manufactured in our metal shop. When compared with 5/16" coils that are usually used to make draft boxes, the 3/8" coil holds more beer, cools faster, yet because the resistance is less the beer can be pushed through the lines with less CO2 pressure. Less applied CO2 pressure means the beer does not overcarbonate and foam wildly if a keg is left on tap for longer than an afternoon. Overcarbonation can be an issue for homebrewers or beer drinkers who are using a draft box for an overnight party or weekend. 8 1/2" wide x 10" tall. 304 grade stainless steel
$98.99
-
Flaked Barley
Add body and improve head retention without adding fermentable sugars Commonly used in Stouts, but can be beneficial to any beer style where a bigger body is desired Use as up to 20% of your grain bill A great way to add body and head retention to your beer. Used especially for stouts, flaked barley can be used across practically all beer styles and is an essential adjunct to have around the brewhouse. Flaked Barley adds protein for body and head retention, without adding fermentable sugars to your wort the way you would with a wheat malt, which makes is great for tweaking the body/head characteristics of a recipe without changing the rest of the grain bill to accommodate a fermentable grain.
$2.79
-
EnoItalia Centrifugal Pump | ENOS 25 | Self-Priming | Stainless Steel | 11 GPM | 1.5 in. T.C. | 110V
Self-priming stainless steel impeller pump with for moving wine or beer Cast stainless pump head with 1.5" tri-clamp connections On/off switch for easy operation 11 gallons per minute reversible flow rate Made in Italy by EnoItalia Centrifugal pump with cast stainless head. 1.5" T.C. inlet and outlet. Self-Priming. Reversible direction. Stainless impeller. Best used for transferring wine or beer between tanks. Specifications 11 GPM Max Pressure: 15.9 PSI (1.1 BAR) 1.5" Tri-clamp fittings Single Speed 1400RPM 194°F Max Temp Rating 14 LBS 12.6"x9.5"x7" 110V Note: Because this product is manufactured in Europe, it will come with a European plug. You will need to re-wire for use in the USA. Please see our European Equipment Wiring Colors guide for instructions on how to convert to a domestic plug.
$399.99
-
Ferrari Wine Bottle Corker | Italian Floor Corker | Acetal Jaws | Removable Legs
Efficient and Easy Corking: Significantly faster and easier to use than handheld or bench-mounted corkers. Compact Storage: Removable legs and lever allow for easy disassembly and storage. Versatile Cork Compatibility: Works with both natural and synthetic corks, including Belgian corks. Acetal resin jaws ensure smooth operation. Adjustable Cork Height: Customize the cork depth with the adjustable nut on the plunger. This Italian-made floor corker offers efficient and easy corking. It features removable legs and a lever for convenient storage, making it significantly faster and easier to use than handheld or bench-mounted models. The unit ships boxed and requires minimal assembly. The adjustable nut on the plunger allows for customization of the cork height within the bottle. Updated in 2023, the corker now features acetal resin jaws (replacing previous brass jaws) and is compatible with both synthetic and natural corks, including Belgian corks. Also available in a welded model that offers added stability (W544). Min. Bottle Height: 9" (230mm) Max. Bottle Height: 15.3" (390mm) Max. Bottle Diameter: 5.5" (140mm) Max. Cork Diameter: 28mm Max. Cork Height: 40mm Assembled Dimensions: 28.9" L x 17.7" W x 35.8" H Made by Ferrari in Italy
$262.99
-
La Tecno | Horizontal Heat Shrinker | Stainless Steel | 800W | 110V
Safe and easy operation compared to handheld shrink guns Shrink capsules adhere quickly, simply slide the bottle into position then remove immediately Made from stainless steel for longevity and easy cleaning 800W power The safest and most simple solution to applying heat shrink capsules to your wine bottles. The horizontal heat shrinker allows you to keep your hands free and clear of the heating element during operation. Shrinking only takes a moment—simply slide the bottle into position and then quickly remove it. Stainless steel construction for easy cleaning. On/Off switch. 800 Watt / 110V.
$197.99
-
Vintner's Best® | Elderberry Fruit Wine Base | 1 Gallon
Commercial Quality Base: Crafted from real fruit juice using the same formulations as commercial wineries. Easy 5-Gallon Batches: One gallon of base yields five gallons of high-quality 10% ABV fruit wine. No Adjustments Needed: Extremely convenient; no pH or acid adjustments required. Simple & Convenient: Just add water and yeast to ferment. All natural and made with real fruit juice, Vintner’s Best® fruit wine bases are crafted from the same formulations used by commercial wineries. One gallon of fruit wine base makes five gallons of high-quality fruit wine at 10% ABV. Extremely easy and convenient to make, requiring no pH adjustments and no acid adjustments. Simply dilute one gallon of Vintner's Best® Fruit Wine Base with four gallons of water, pitch yeast and stir! The wine base is a blend of juice concentrates, HFCS, citric and malic acids and natural flavor designed to make a fermentable base for a fruit wine blend at 18.9°B. The product is blended, pasteurized. Diammonium phosphate is added as a yeast nutrient. Benefits of Vintner’s Best® Fruit Bases: All-natural fruit juice 6-8 weeks to finished product No PH or acid adjustments Shelf stable for up to two years No refrigeration necessary Scalable to any batch size Pre-blended - no straining out fruit pieces Easy and convenient More inclusive – add only yeast and water Re-sealable jug with tamper resistant seal Over 30 flavors to choose from Concentrate Specs: °Brix: 73.1 min Acidity: 2.2–2.6 (as citric acid) Ingredients: High Fructose Corn Syrup, Apple, Pear, Blackberry & Grape Juice Concentrates, Water, Citric Acid, Natural Flavors
$49.99
-
Twin Peaks Malbec Bonarda Wine Making Kit | VineCo Global Passport Series™ 2026 | While Supplies Last!
VineCo's Twin Peaks Malbec Bonarda Wine Making Kit is now in stock and ready to ship. Grab this limited-edition kit while you still can! Twin Peaks celebrates two of Argentina's most iconic and widely planted great varieties Malbec and Bonarda Vibrant bouquet of ripe blackberry, juicy plum, and a delicate whisper of red currant Medium-Full body and dry, 13% ABV Whip up a batch in 30 mins or less! Yields 6 gallons (2 cases) of finished wine in 6-8 weeks Bottle labels included for a professional finish Twin Peaks celebrates two of Argentina's most iconic and widely planted great varieties Malbec and Bonarda. These two varietals that dominate Argentina's wine region rise together, like the two highest peaks of the Andes that framed the vineyards of Mendoza. From the sun-drenched foothills of the majestic Andes, Twin Peaks is a masterful blend of Malbec and Bonarda that captures the essence of Mendoza's most coveted varietals. This robust red opens with a vibrant bouquet of ripe blackberry, juicy plum, and a delicate whisper of red currant. On the pallet, it unfolds with richness and elegance, layers of dark fruit, mingle with notes of tobacco, and warm spice, revealing complexity with every sip. Balanced by moderate acidity and smooth well integrated tannins that lead to a velvety texture and long lingering finish. About the Region: Mendoza, Argentina Nestled against the striking backdrop of the Andes mountains, Mendoza is Argentina's leading wine region, and perfect setting for bold reds, especially Malbec and Bonarda. The high-altitude vineyards, thousands of feet above sea level, create a unique micro climate we are intense sunlight is balanced by cool mountain nights. The combination of the diurnal shift and the rustic terroir allow the grapes to ripen slowly, preserving their vibrant acidity all while developing deep, expressive flavors. Food Pairings: Grilled chorizo sausage Mushroom and black bean burgers Aged cheddar Key Features: Flavor Profile: Ripe blackberry, plum, and red currant Sweetness Level: Dry Oak Influence: Medium-Heavy Body: Medium-Full Alcohol By Volume (ABV): 13% Kit Volume: 14 L Approximate Yield: 23 L Ready to Bottle: 6 - 8 weeks Bottle Labels: Included Grape Skins: Not Included
$199.99
-
OCI American Oak Powder | Medium Toast
Oak Powder ensures the most rapid flavor extraction due to its small particle size Offers a quick and efficient method to impart oak characteristics without the need for lengthy aging Medium toast imparts flavors of fresh oak, coconut, vanilla, sweet butterscotch, light caramel, and faint almond Ideal for short-term aging Finely ground oak powder offers a quick and efficient method to impart desirable oak characteristics. Its small particle size ensures rapid flavor extraction, perfect for adding rich notes and enhancing the complexity of your beverage without lengthy aging. Achieve a smoother, more integrated oak profile in less time. Medium toast imparts flavors of fresh oak, coconut, vanilla, sweet butterscotch, light caramel, and faint almond. Oak Chips Inc. (OCI) specializes in providing premium oak alternatives, such as chips, cubes, and staves, for enhancing the flavor and aging process of wine, spirits, and beer. They source their oak from sustainable forests and offer various toast levels to help beverage makers achieve desired flavor profiles.
$4.49
-
Bar Top Spirit Corks | Synthetic T-Cork Stopper | Black Wood Top | 22.6mm | Bag of 25
Bar Top T-corks offer the convenience of hand sealing, allowing you to easily reclose bottles Synthetic cork stopper with black beechwood head 22.6mm cork diameter | Fits 750mL Farro spirit bottles Bar top corks featuring beech wood heads will give finish your product with a touch of style. Bar top corks are intended to fit tightly to eliminate leaking and maintain freshness of product. You may need to use a rubber mallet to install a bar top cork on a container with matching neck finish. Easy to remove and reuse, bar top corks feature synthetic Expancork stems. Dimensions: 1.34" head diameter; 0.89" (22.6mm) cork diameter; 1.34" total height.
$29.99
-
True Citrus® | True Lime® Crystalized Flavoring | Made from Real Lime
Add bursting, fresh-squeezed flavor to all of your favorite beverages with ease! True Fruit Powders™ captures the true essence of fruit—available year-round and doesn't require refrigeration No artificial sweeteners, flavors or preservatives Non-GMO fruit flavoring. Made from simple, clean ingredients True Citrus® offers authentic, fresh-tasting citrus & fruit ingredients for beers & seltzers. Delivering real flavor from real fruit in a shelf-stable, cost-effective, crystallized format, True Citrus will be your go-to solution for all your fruit flavor needs. Using their proprietary drying, crystallization and blending methods, True Citrus captures and locks-in the optimal blend of fruit juices, oils and essences. This allows their products to deliver authentic taste and aroma in a highly versatile, concentrated and simple-to-use, easy to store form. All True Citrus products are made with simple and clean ingredients, including real citrus juices and oils, that give them their natural, fresh-squeezed taste. This flavoring ingredient contains ZERO artificial sweeteners, flavors, or preservatives, and is gluten free and Non-GMO. Dosage: Add to your finished beverage after filtering or fining. We recommend a starting dosage for beer & seltzer at 0.25% by weight which is 1.5-2 oz per 5 gallons or 10-11 oz per bbl. Add to taste for all beverages. Ingredients: Crystallized Lime (citric acid, Lime oil, Lime juice), Sugar Sugar Content: 9.7%
$4.49
-
True Citrus® | True Fruit Powders™ | True Mango® Powdered Flavoring | Made from Real Mango
Add bursting, fresh-squeezed flavor to all of your favorite beverages with ease! True Fruit Powders™ captures the true essence of fruit—available year-round and doesn't require refrigeration No artificial sweeteners, flavors or preservatives Non-GMO fruit flavoring. Made from simple, clean ingredients True Citrus® offers authentic, fresh-tasting citrus & fruit ingredients for beers & seltzers. Delivering real flavor from real fruit in a shelf-stable, cost-effective, crystallized format, True Citrus will be your go-to solution for all your fruit flavor needs. Using their proprietary drying, crystallization and blending methods, True Citrus captures and locks-in the optimal blend of fruit juices, oils and essences. This allows their products to deliver authentic taste and aroma in a highly versatile, concentrated and simple-to-use, easy to store form. All True Citrus products are made with simple and clean ingredients, including real citrus juices and oils, that give them their natural, fresh-squeezed taste. This flavoring ingredient contains ZERO artificial sweeteners, flavors, or preservatives, and is gluten free and Non-GMO. Dosage: Add to your finished beverage after filtering or fining. We recommend a starting dosage for beer & seltzer at 0.5% by weight which is 3-4 oz per 5 gallons or 18-24 oz per bbl. Add to taste for all beverages. Ingredients: Crystallized Mango (citric acid, Mango oil, Mango juice), Sugar Sugar Content: 21.3%
$9.99
-
Pop Cultures | PopTops™ Swing Top Bottles | Amber Glass Bottles | 16 oz | Case of 12
PopTops™ Swing Top Bottles from Pop Cultures provide the best of both worlds when it comes to bottling! They provide the ease and flexibility of flip top bottles, with the added ability to cap for shelf stability. These attractive and robust bottles are ideal for whatever beverage tickles your fancy. Whether you got hooch, booch or beer, it's all good in here. No capper or additional equipment required when using the swing tops. Resealable, reusable and recyclable (though you will never want to get rid of these bottles!). Bottles rated to 100 PSI. Case of 12 x 16 oz Amber Pop Tops Bottles with Swing Tops. Crown Caps not included (see recommended items below for options). Case QTY: 12 Pallet QTY: 112 cases
$44.99
-
Pressurizable 3.5 Gallon Tank for Beer & Wine Plate Filter
A great accessory for the FIL45 Plate Filter. Use pressure to push beer/wine through the plate filter rather than gravity alone. Comes with a funnel top and stable base maintaining an excellent balance. Please refer to the manual below for complete instructions. BPA Free Made from high density polyethylene Max Temp Rating: 167°F (75°C) Includes 35" length of 5/16" ID x 7/16" OD tubing. Plate filter not included.
$49.99
-
KOMOS® 5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 18" T x 5.25 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$89.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 5" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 5" long. This is the same length as a Tee. It is used to swap instruumentation in and out of an established system.
$24.99
-
Fresh Roast SR-800 Coffee Roaster
Finally, an affordable 1/2 pound coffee roaster! The Fresh Roast SR800 features all of the great system upgrades we saw with the SR540, but with a larger maximum roast capacity of 8 oz of green coffee beans. The roast capacity of wet processed coffee is 8 oz, but for natural processed beans we recommend decreasing the roast capacity to 6 oz. Natural or dry processed beans create more chaff than wet-processed. The heat, fan, and time can all be adjusted by simply pushing in and turning the knob. The SR800 features a real-time temperature read out, allowing you to quickly check the current temperature with a quick turn of the knob. Instead of a general Low, Medium, and High temperature setting, this unit features 9 levels of heat adjustment. If you want to take your home roasting to the new heights, and get nearly double the roast capacity of the SR540, pick up the Fresh Roast SR800! Maximum batch - 8 oz Minimum batch - 4 oz 9 level heat adjustment Easily control heat, fan, and time settings 120V power Please note: overall roasting time may vary depending on your household outlet's voltage rating, as well as the overall size, density and moisture content of the beans.
$334.00
-
BrewBuilt® 1.5" Tri-Clamp Thermowell
This BrewBuilt thermowell features a 1.5" T.C. connections, 4" long probe, and is compatible with 1/4" diameter temp probes. On a stainless steel conical, this allows you to use a digital temperature controller to maintain fermentation temps. For electric boil kettles and hot liquor tanks, the thermowell allows temperature readings to be sent to a PID controller to control an electric heating element. 1.5" T.C. 4" probe Compatible with 1/4" Ø temp probes Made from 304 stainless steel
$27.99
-
Replacement Seating Cone for Professional Wine Bottle Filler
Replacement seal for the main shaft of the fill spout on our WE670 and WE643 Professional Wine Bottle Fillers. This is the cone that the bottle opening seats against to seal the system during filling.
$24.99
You have seen 1152 out of 3961 products