Carboy Accessories

Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #10 size is recommended for PET carboys.

Read more less

Extra large 3-piece airlock that can hold 50% more sanitizer or water than the standard size (FE370). For both carboys and buckets. In our opinion, 3-piece airlocks are superior to the triple ripple type in that they can be taken apart and cleaned. However, we do sell the triple-ripple (or S-Shaped) type airlock (FE371), in case that's your preference.   Please Note: Stopper Not Included.

Read more less

For replacing worn out washers on most plastic spigots. Compatable with our FE346, FE347 and FE47A.

Read more less

Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #11-11.5 (large) size is recommended for full size barrels and 14 gallon demijohns.

Read more less

A great funnel for small jobs. This will fit into the necks of most beer and wine bottles, allowing for individual filling. Also works well to fill 2L PET bottles when making soda.  If you make yeast starters in an erlenmeyer flask, pitching that starter just got a whole lot easier! Made in Italy by Ferrari.

Read more less

Plastic funnel, top measures 40 cm (15-3/4 in) wide. This mongo funnel is awesome for winemaking or brewing. Internal groove to accept filter screen (BE488). Made in Italy by Ferrari.

Read more less

Universal stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #11-11.5 (large) size is recommended for full size barrels and 14 gallon demijohns.

Read more less

This mesh sleeve is custom made for the FerMonster Plastic Carboy. The plastic ring sits inside the neck of the fermenter, and the lid can be secured on top to make an airtight seal. The ring actually holds onto the neck of the FerMonster so there's no risk of the mesh sleeve falling into the carboy. For brewers, the MonsterMesh is perfect for adding dry hops, oak chips, or fruit additions, which can easily be removed at the scheduled time. For winemakers, in addition to adding grape skins or oak chips, the MonsterMesh is a great way to eliminate head space in the fermenter. Simply fill up the strainer with glass marbles to displace as much wine as needed to fill the volume of the carboy. Made from food grade materials, the #50 mesh will not affect the flavor of the beer or wine, and is temperature rated to 122°F. Designed for multiple uses, the MonsterMesh can be cleaned in the dishwasher and sanitized with the sanitizer of your choice. The MonsterMesh can be used alongside the MiniMesh to hold multiple additions. The MonsterMesh will sit on the neck of the carboy, and the MiniMesh can be inserted through the stopper hole in the lid. This way you can have two different infusions starting or stopping at different times.    

Read more less

A new carboy handle in distinctive blue color that fits our threaded neck 6.5 gal carboys.

Read more less

This mesh sleeve is custom made for the Vintage Shop PET Carboy. The plastic ring sits inside the neck of the fermenter with room for a #10 stopper to be inserted for an airtight seal. The ring actually holds onto the neck of the carboy so there's no risk of the mesh sleeve falling into the carboy. For brewers, the MiniMesh is perfect for adding dry hops, oak chips, or fruit additions, which can easily be removed at the scheduled time. For winemakers, in addition to adding grape skins or oak chips, the MiniMesh is a great way to eliminate head space in the fermenter. Simply fill up the strainer with glass marbles to displace as much wine as needed to fill the volume of the carboy. Made from food grade materials, the #50 mesh will not affect the flavor of the beer or wine, and is temperature rated to 122°F. Designed for multiple uses, the MiniMesh can be cleaned in the dishwasher and sanitized with the sanitizer of your choice. For FerMonster users, the MiniMesh and MonsterMesh can be used simultaneously. The MonsterMesh will sit on the neck of the carboy, and the MiniMesh can be inserted through the stopper hole in the lid. This way you can have two different infusions starting or stopping at different times.    

Read more less

If you keep your carboy in a fermentation locker or other area with little to no head space, every inch counts. We love these low-profile 2-piece airlocks for their compact size and simple design. Instead of a floating plastic "hat", the center piece is molded into the lid. One less thing to clean and misplace! This is the very smallest airlock we sell and works well with fermentations up to 7 gtallons.  Holds approximately 0.4 fl oz (12 ml) Chamber - 1-1/2" tall x 1-3/8" diameter Stem - 1" long Stopper not included

Read more less

The BrewBuilt Neoprene Carboy Sleeve works great for maintaining the internal temperature of your 5, 6, or 6.5 gallon glass carboy. Highly recommended for use with the BrewBuilt Carboy CoolStix. The added insulation will lower the amount of cycles needed to maintain fermentation temperatures and greatly assist in cold crashing. The sleeves are 6 mm thick with stitched piping on the edges for exceptional durability.   SKU Size Height (in.) Diameter (in.) FE329A 5 Gal 14.75 10.75 FE329B 6 Gal 17.25 10.90 FE329C 6.5 Gal 17.50 11.20  

Read more less

If you keep your carboy in a fermentation locker or other area with little to no head space, every inch counts. We love these low-profile 2-piece airlocks for their compact size and simple design. Instead of a floating plastic "hat", the center piece is molded into the lid. One less thing to clean and misplace! This is the larger of the two mini airlocks we sell, holds more liquid than the smallest design, and is good for fermentations volumes up to 13 gallons.  Holds approximately 0.67 fl oz (20 ml) Chamber - 1-5/8" tall x 1-3/4" diameter Stem - 1-1/4" long Stopper not included  

Read more less

Plastic funnel, top measures 35 cm (13-3/4 in) wide. Large funnel perfect for wine making or beer making.   Made in Italy by Ferrari.

Read more less

Buon Vino stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #8-9 (medium) size is recommended for medium size barrels and 9 gallon demijohns. 1 13/16''- 1 7/16''

Read more less

Use this specially made carboy bag to protect yourself and your beer! Carboys can be slippery, especially when wet. Our strong canvas bag allows you to more safely carry a carboy. If it is accidentally dropped the canvas will help contain the broken glass and reduce personal injury. Your beer also benefits as it is protected from light. UV Light interacts with compounds in hops to create skunky off flavor (editor note... I may not be a smart man but I do know skunky flavors in beer aren't good). These are made in the USA from heavy black canvas with strong nylon webbing that is stitched (very strong) to support the carboy when lifting. In the summer, you can help reduce high fermentation temps by placing frozen ice packs in between the canvas and the carboy.

Read more less

Buon Vino stoppers have a longer taper to help produce a better fit and a snug seal, and a lip which prevents them from falling into your container. Available with a 3/8 inch hole for an airlock, or solid with no hole. #8-9 (medium) size is recommended for medium size barrels and 9 gallon demijohns.

Read more less

Plastic funnel, top measures 15 cm (6 in) wide. Does not accept a filter screen. Made in Italy by Ferrari.

Read more less

Plastic funnel screen for use with 30 cm and 35 cm plastic funnels. Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.

Read more less

Plastic funnel screen for use with 21 cm, 25 cm, and 25 cm Anti-splash plastic funnels. Fits our BE489, BE493, and BE498 Snaps into the specially designed groove in the base of the funnels to filter out solids and small particles. Fits Ferrari brand funnels. Not compatible with Vintage Shop brand funnels.

Read more less

This plastic spigot has an adjustable spout which can be rotated 360 degrees and has a thread to fit into your plastic fermenter. It also has a bulkhead so you can use one of these in any type of vessel with a 26 mm hole that you would like to add a spigot to. Great for turning a bucket into a bottling bucket! Comes with spigot, 2 washers and a lock nut. KegLand Part Number: KL01632  

Read more less

Use this specially made carboy bag to protect yourself and your beer! Carboys can be slippery, especially when wet. Our strong canvas bag allows you to more safely carry a carboy. If it is accidentally dropped the canvas will help contain the broken glass and reduce personal injury. Your beer also benefits as it is protected from light. UV Light interacts with compounds in hops to create skunky off flavor (editor note... I may not be a smart man but I do know skunky flavors in beer aren't good). These are made in the USA from heavy black canvas with strong nylon webbing that is stitched (very strong) to support the carboy when lifting. In the summer, you can help reduce high fermentation temps by placing frozen ice packs in between the canvas and the carboy.

Read more less