Up to 35% Off · Ends June 30
Everything On Sale
744 products marked down through the end of June. Shop by brand below or scroll the full lineup.
-
Brewtools MiniUni™ 40 | 40L | 10.5G
The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation. Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories. Key Features: PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation Easy cleaning with a 4" T.C. top port and 2" T.C. bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit. MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Packaging size: 13.3" (w) x 13.3" (d) x 36.6" (h) Net weight: 24.6 lbs Gross weight: 28.6 lbs Tank diameter (inside): Ø11" Max volume: 10.5 gal Cone volume: 0.4 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2 bar / 30 PSI In the Box: MiniUni™ Tank Base with silicone gasket Wall bracket and wall support Wall bracket safety pin Composite T.C. adapter 4" to 34mm Airlock, 3-piece with holder 4" tri-clamp 2" tri-clamp 2" T.C. blind cap T.C. gaskets For User Manuals and support, please follow this link to Brewtools Docs.
$493.00 $419.05
-
Brewtools MiniUni™ 30 | 30L | 7.9G
The Brewtools MiniUni™ series fermenters are high-quality, affordable and flexible tanks for fermentation, storage and serving beer Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included The MiniUni™ is a series of high-quality, affordable and flexible tanks for fermentation, storage and serving beer and endless other applications like water heating, cleaning liquid storage, HERMS setups, etc. They can be kept in the included base, or installed on the wall with the included wall bracket. With the optional pressure kit, you can utilize the 2 bar (30 PSI) pressure rating for fermentation and carbonation. Use them to build your setup, they will last a lifetime! And as always, Brewtools appreciates any feedback or requests for accessories. Key Features: PureBlast™ surface inside and out which eliminates the use of wax and polishing compounds and does not require passivation Easy cleaning with a 4" T.C. top port and 2" T.C. bottom port Pressure rated for 2 bar / 30 PSI. Wall bracket included If you want to raise the MiniUni base and make room for an elbow with a butterfly valve or other accessories, check out the MiniUni™ Leg Kit. MiniUni tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Packaging size: 13.3" (w) x 13.3" (d) x 30.3" (h) Net weight: 21.2 lbs Gross weight: 24.6 lbs Tank diameter (inside): Ø11" Max volume: 7.9 gal Cone volume: 0.4 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2 bar / 30 PSI In the Box: MiniUni™ Tank Base with silicone gasket Wall bracket and wall support Wall bracket safety pin Composite T.C. adapter 4" to 34mm Airlock, 3-piece with holder 4" tri-clamp 2" tri-clamp 2" T.C. blind cap T.C. gaskets For User Manuals and support, please follow this link to Brewtools Docs.
$431.00 $366.35
-
Perforated Pizza Peel | Square Peel | 12"
The main purpose of a perforated pizza peel is to get rid of excess flour from the pizza base. But why do you want to get rid of the flour? When you’re baking pizza on hot stone or steel, you don’t want flour on the baking surface because it burns. Fine wheat flours that are most commonly used for baking pizza burn at fairly low temperatures. It’s this flour that causes trouble. Dusting your pizza peel with semolina flour, which can handle higher heat better, can also help. Burnt wheat flour will make the oven smoky and will result in more cleaning work when you’re done baking. The burnt flour tends to stick and can be a real pain to get rid of. Especially on an unglazed pizza stone. And if you’re not able to clean the stone properly, the flour can keep smoking next time you use the stone. Less Contact Surface – Less Sticking A perforated peel has a smaller surface that is in contact with the pizza dough. This means pizza is less likely to stick to a perforated pizza peel. The reason is that the larger the contact surface is, the more friction there will be between the peel and the pizza. And more friction means it is more likely to stick. A smaller contact surface also means that you’ll need less flour when you’re dusting the peel. As noted above, you want as little flour as possible in the hot oven. So in addition to removing more flour from the dough itself, the peel need less flour due to the holes. Perforated pizza peels are also lighter than solid pizza peels, due to less metal on the carrying surface. This will make it easier to use the peel. Less Condensation – Crispier Pizza Crust When you take a hot pizza out of the oven, you may have noticed that water sometimes is formed under the pizza. This moisture makes the pizza less crispy, or even soggy. Using a solid pizza peel may create condensation when the hot pizza meets the cold (room temperature) surface. This is mostly a problem with metal peels since hot air is trapped between the pizza crust and the smooth carrying surface. Condensation happens when this hot air is cooled down to a certain point (it’s dew point), and water drops are created. When you’re using a perforated pizza peel, on the other hand, you will experience less condensation. The reason is that the holes let the hot air escape through the peel. 12" Square x 31" Long Lightweight aluminum construction. Phillips Head screwdriver required for assembly. KegLand Part Number: KL21869
$54.99 $46.74
-
HIZO G14 Pizza Oven | Gas Powered Pizza Oven | 14" Ceramic Pizza Stone | Stealth Black
Making homemade pizza in your kitchen oven is a tasty and rewarding endeavor, but nothing matches the performance and results you get from a purpose-built pizza oven. Kitchen ovens generally max out around 550°F whereas pizza ovens can reach as high as 1,000 degrees. The ideal way to cook pizza is quickly and at very high temperatures in the 800-900°F range, so if you want to take your homemade pizza game to the next level, a gas-fired pizza oven is the way to go! The HIZO G14 Portable Gas-Fired Pizza Oven is the perfect no-hassle solution to cooking the best homemade pizza outdoors. Heats up to 932°F and cooks a pizza in only 1 to 2 minutes. Propane powered and ready to use straight out of the box with no bolts or tools required for assembly. Complete with dialed control and gas igniter included as standard—no batteries or matches required! Setup and packing away couldn't be easier thanks to the four stable folding legs. Includes: HIZO G14 Pizza Oven Liquid Propane hose and regulator Dual Scale Temperature Gauge: 32°F - 932°F (0°C - 500°C) Ceramic Pizza Stone: 14" x 14" x 3/8" Recommended Accessories: Waterproof Carry / Storage Bag (FPE202) Infrared Laser Thermometer (MT401) 12"or 14" Perforated Pizza Peel (FPE205 / FPE206) 8" Round Pizza Spinner (FPE204) 4" Pizza Cutter (FPE203)
$229.00 $171.75
-
Columbus / CTZ | Cryo Hops®
Extremely versatile and well fit for IPAs, Pale Ales, Hazys, Stouts, and Lagers Aroma Profile: Citrus, Dank, Earthy, Woody Alpha Acids: 15.0 – 18.0% Cryo Hop® Hop Pellets Higher AA and nearly twice the resin content of traditional T-90 hop pellets Increase yield by reducing vegetal matter in your brewhouse and fermenter Cryo Hops® provide brewers with the ability to get gigantic hop character while reducing astringent and unpleasant vegetal flavors. With a substantially higher oil and resin content, LupuLN2 powder offers up all the flavor and aroma of a heavily hopped beer, but with a significanly reduced grassy character. Additionally, the lower dosage rate of the concentrated powder reduces the volume of trub and therefore, kettle loss. Using Cryo Hops® you will net more beer that is clearer! Typical usage of Cryo Hops® would be roughly 50% of pellets. LupuLN2 powder can be used in any application where traditional hop products are utilized, including: Bittering, Kettle, Whirlpool and even direct to the fermentor. It is suggested that you use Cryo Hops® as late additions, in the whirlpool or dry hop, as the volatile aromatic compounds will be driven off if added early in the boil. Cryo Hops® are an innovative hop product that is made by separating the lupulin from the hop flower using cryogenic processing. The result is a product with twice the potency of T90 pellets, with reduced astringency and vegetative material. Note: These hops come pelletized. The powder is compressed into pellet form to make handling easier. Typical Hop Statistics: Alpha Acids: 15.0 – 18.0% Beta Acids: 4.5 – 6.0% Total Oil: 2.0 – 4.0% Cryo Hops® is a registered trademark owned by Yakima Chief Hops, LLC.
$3.49
-
Brewtools | Tri-Clamp Barb | 30mm x 2" T.C. | 1.18" Barb
T.C. 2" to 30mm (1.18") hose barb. Fits Brewtools 25x34mm silicone tubing (BT1033A) normally used to dump from fermenters and other equipment.
$35.00 $29.75
-
Brewtools | Silicone Tube | 25mm ID x 34mm OD | 1.5m Length | Clear
High quality transparent silicone tube. Recommended for dumping yeast. Use with 30mm barb x 2" tri-clamp (BT1074). Food grade silicone Inside diameter: 25mm (0.98") Outside diameter: 34mm (1.3") Sold in 1.5m lengths (4.9')
$31.00 $26.35
-
BrewZilla | Replacement RAPT Controller Screen | Gen 4 | 35L
Replacement screen board for the BrewZilla's RAPT Controller. Suitable for Gen 4 / 35L units only.
$43.99 $37.39
-
Brewtools | Power Supply | 24V | 40W | DIN 43650
Power supply with DIN 43650-connector for solenoid valves. Made for use with solenoid valves directly from an AC outlet in an Inkbird or equivalent systems. Adapters for global use included. Specifications: Input: 100-240V AC, 50/60 hz Output: 24V DC, 1.66A (39.84W) Cord Length: 3m (9.8')
$42.00 $35.70
-
Brewtools | Adapter | G3/4 in. x 34mm T.C.
Adapter from G3/4" threads to TC34mm Mainly used with MiniChilly 17 for glycol loops. Gasket sold separately.
$36.00 $30.60
-
BrewBuilt® X2 Uni Conical Lid
The BrewBuilt X2 Conical Lid comes with one 4" T.C. port and two 1.5" T.C. ports. This is a direct replacement to the lid that comes standard on the X2 Uni, but X1 Uni owners can also upgrade to this lid if they want to take advantage of the second 1.5" port. This extra port is great for adding hops or other flavor additions without needing to remove and reinstall the Blowoff U Barb or other accessories attached to the primary 1.5" port. Also features a pull ring PRV built into the lid. The 25/38 gal size will fit X1 28/42 gal fermenters. NOTE: The lid does not include clamps, gaskets, or other fittings seen in the example photo. The PRV will come pre-installed and all other ports will come bare.
$164.99
-
Balazs Planter Barrel | Half Barrel Planter | Flower Pot | 23.5" x 19.5"
Brand new, unused oak barrel that makes for a stunning planter barrel or flower pot Offers a clean, bright aesthetic compared to distressed, used barrels Zinc-plated steel barrel hoops for corrosion resistance Stainless ring handles for easy carrying when empty Linseed oil coated on the outside for beauty and increased longevity These planters will add a beautiful aesthetic to breweries, wineries, or your home patio. Plenty of room for growing hops, grape vines, barley, flowers, fruits, vegetables, citrus, or whatever your green thumb leads you to sow. Unlike traditional wine barrels cut in half these barrels are purpose-designed so they not only look beautiful, they are built to stay together over the long haul. Open Diameter 21.75" x 17.75" Deep
$219.99 $186.99
-
Balazs Planter Barrel | Half Barrel Planter | Flower Pot | 21.5" x 16"
Brand new, unused oak barrel that makes for a stunning planter barrel or flower pot Offers a clean, bright aesthetic compared to distressed, used barrels Zinc-plated steel barrel hoops for corrosion resistance Stainless ring handles for easy carrying when empty Linseed oil coated on the outside for beauty and increased longevity These planters will add a beautiful aesthetic to breweries, wineries, or your home patio. Plenty of room for growing hops, grape vines, barley, flowers, fruits, vegetables, citrus, or whatever your green thumb leads you to sow. Unlike traditional wine barrels cut in half these barrels are purpose-designed so they not only look beautiful, they are built to stay together over the long haul. Open Diameter 19.75" x 14" Deep
$164.99 $140.24
-
54 qt Igloo Marine Ultra Cooler
Keep your catch of the day fresh with the Igloo® Marine Ultra 54 Quart Cooler. It’s designed with Ultratherm® insulation for optimal cooling performance and has an integrated fish ruler on the lid. The marine-grade design can withstand to the wet conditions and features rust-resistant stainless steel screws, ultraviolet inhibitors, and a stainless steel hinged latch. Features: Ultratherm® insulated lid offers cooling performance Holds 83 cans Features an integrated fish ruler on lid Ultraviolet inhibitors protect the cooler against sun damage Rust-resistant stainless steel screws and lid strap Stainless steel hinged latch Recessed triple-snap drain plug makes clean up simple Marine-grade hinges Non-slip grip handles provide comfortable carrying Capacity: 54 Quart Dimensions: 26.375” x 15.5” x 15.5” Weight: 8.1 lbs. Manufacturer’s warranty: 1-year Country of Origin : United States of America Style : 44683 DSG Pro Tips Brand : Igloo
$99.99 $84.99
-
MB® Tri-Clamp Spunding Valve | 2 BAR | 15-30 PSI | 1.5" T.C. | Etched Pressure Scale | Hand Adjustable | Polycarbonate Liquid Cylinder | Stainless Steel
Ferment under pressure with precisely tuned pressure settings Pressure fermentations help to suppress unwanted esters Make clean lagers faster and at higher temperatures Easy-to-read etched pressure scale from 15 to 30 psi Hand adjustable—turn clockwise or counterclockwise to raise or lower your setting Made from 304 stainless steel with polycarbonate cylinder MB is a brand dedicated to crafting and sourcing high-quality, professional-level brewing supplies The MB T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with any pressurizable stainless steel conical with 1.5" T.C. top ports. For larger units, the spunding valve can also be integrated into the blowoff pipework and used with a pressure gauge and tri-clamp tee. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Adjustable from 15-30 psi Made from 304 stainless steel 11.75" H x 4" Ø For Your Safety: Never exceed the maximum rater working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
$199.99 $169.99
-
Brewtools | Inline Oxygenation Kit
An inline oxygenation kit designed to inject oxygen during transfer to fermenter. We recommend placing a sight glass after the TC tee, to keep an eye on the O2 flow. Requires an oxygen tank with a pressure regulator. Included: TC 34mm Tee Barbed O2/CO2 stone holder, 6-10mm tube O2/CO2 stone, 0.5micron. G1/8" threads 3 TC 34mm clamps 1 5-pack of TC 34mm gaskets 1 gasket for the stone
$118.00 $100.30
-
Brewtools | Laser Cut Filter | B80pro
Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.
$148.00 $125.80
-
Brewtools | Laser Cut Filter | B150pro
Laser cut filters made from steel blasted and electropolished stainless steel. Simple cleaning and maximum durability. Gap width: 1.3mm Pre-cut hole for weldless fitting to use with future accessories.
$172.00 $146.20
-
Brewtools | CIP Adapter | 4 in. T.C.
4" CIP adapter with 1/2" MPT threads for CIP spray ball with or without extension pipe. Used for CIP via the 4" port on Brewtools Steam Hats or the F150 Unitank. Fluid input is TC 34mm. Remember 34mm Tri-Clamp and gasket are needed, and also the fitting of choice for connecting fluid input.
$42.00 $35.70
-
Brewtools | Heating Element | 2 in. Tri-Clamp | 500W, 230V
2" TC Sanitary heating element designed for use in santary applications where ease of cleaning is important. The heating element is designed to get the lowest possible watt density and is very easy to clean. Perfect for use with Brewtools Unitanks with kveik yeast or other high temperature fermentation applications. Can also be used in cominbation with 2" TC pipes for RIMS applications. Note that the product comes without any temperature or power control. The manufacturer does not take responsibility for incorrect use or use with too much power output. A PID-regulator may be needed to maintain accurate temperatures. Diameter: Ø42mm (1.65") Length: ~300mm (~11.8") Included: Heating element Power cable 2 meter
$192.00 $163.20
-
Brewtools | Steam Hat | B80pro
Brewtools pro steam hats are designed for maximum flexibility. They feature a silicone edge seal, 4 clamps to hold it in place on your brewing system, a 110mm inspection hole you can add your hops through when boiling, 2 silicone covered handles and a 4 inch accessory mount on top. The silicone plug for the inspection hole is included. Remember to order clamp and gasket for the top port. For User Manuals and support, please follow this link to Brewtools Docs.
$271.00 $230.35
-
Brewtools | Trubinator™ | Large
Trubinator is a product for use in your brewing system or boil kettle. During whirlpool, hops and other particles will gather in the middle of the filter, making it possible to pumpe more clean wort to your fermenter. A single wingnut and bolt holds the filter in place, so it's easy to disassemble for cleaning. Diameter: 500mm (19.7") Height: 90mm (3.5") Standard filter: R2x5 For User Manuals and support, please follow this link to Brewtools Docs.
$172.00 $146.20
-
Brewtools | HopDrop Kit | 4 in. Tri-Clamp | Fits F150
Kit for dryhopping and adding other ingredients to a pressurized fermenter without oxygen. This is the correct size for the Brewtools F150 Unitank. Included in the box: Butterfly-valve, TC 4" TC Adapter, 4" til 34mm TC Pipe, 4", L=200mm Tri Clamp, 4" (2 pcs) Tri Clamp, 34mm (3 pcs) TC34mm Manual PRV TC34mm Ball Lock connector, Gas TC Tee, 34mm, L=60mm TC Gasket, 4", (3 pcs) TC Gasket, 34mm DN20, 5-pack The volume of the HopDrop Kit is 1.5L. Pellet capacity in weight will vary
$342.00 $290.70
-
Brewtools | F150 Unitank | 40-140L/10.5-36.9G Capacity
Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, heaters, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access. 2" TC dump and racking valves. BrewTools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 50" Max height w/o acc.: 57.9" Packaging size: 51.2" (h) x 23.6" (w) x 23.6" (d) Net weight: 123.5 lbs Gross weight: 136.5 lbs Tank diameter (inside): Ø19.7" Gross volume: 41.7 gal Max rec. volume: 40 gal Min rec. volume: 10.5 gal Volume, cone: 6.3 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-4" 1 pcs TC blind cap, 4" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 4" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 4" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.
$3,084.00 $2,621.40
-
Brewtools | F80 Unitank | 5.2-19.8 Gallon Capacity | 20-75L
Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 43.3" Max height w/o acc.: 51.2" Packaging size: 44.5" (h) x 20.5" (w) x 20.5" (d) Net weight: 99 lbs Gross weight: 110 lbs Tank diameter (inside): Ø15.75" Gross volume: 22.7 gal Max rec. volume: 21.1 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.
$2,467.00 $2,096.95
-
Brewtools | F40 Unitank | 5.2-10.5 Gallon Capacity | 20-40L
Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 84 lbs Gross weight: 98 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.
$2,282.00 $1,939.70
-
Brewtools | Starter Pack 2-valve Setup | For B40pro/B80pro/B150pro
This is the recommended accessories to get you started using the Brewtools pro systems. The package includes an efficient counterflow chiller, an extra 3-way valve to make you able to choose if you return the cooled wort to the tank creating a whirlpool or pump directly to the fermenter. A third sensor gives you exact measurements of the wort returning from cooling. The necessary fittings and accessories are also included. Included: 1 pcs 3-way ball valve, TC34mm DN15 1 pcs Dip tube, short 1 pcs Counterflow Cooler, Pro 1 pcs O-ring, Viton, 18x14x2mm 5-pack 3 meter Silicone Tube 16x25mm, clear 2 pcs TC Gasket, 34mm, DN15, 5-pack 2 pcs TC34mm to 12mm hose barb 1 pcs TC34mm to 19mm hose barb, sensor holder 4 pcs TC34mm to 19mm hose barb 1 pcs Temp. Sensor, inline, M10 6 pcs Tri Clamp, 34mm 1 pcs TSP, 100g For User Manuals and support, please follow this link to Brewtools Docs.
$667.00 $566.95
-
Neoprene Jacket for BrewBuilt® X2 Uni Conical
Upgrade your base X2 Uni conical with a neoprene jacket to help insulate your fermentation and maintain stable temperatures. Not compatible with the X2 Jacketed Uni conical or X1 Uni conicals.
$59.99 $38.99
-
CellarScience® PRIME Dry Yeast | Cask & Bottling Yeast | Premium Beer Yeast
Developed specifically for bottle conditioning. PRIME has a high alcohol tolerance, neutral flavor, ferments quickly, and has excellent flocculation to form a compact sediment at the bottom of the bottle, keg, or barrel. Does not ferment maltotriose so will not dry your beer out further and will only ferment the sugar you add. Every batch is PCR tested to ensure quality. Dosage: Use at a rate of .38 grams per gallon or 1 gram per liter. Directions: Mix the desired amount of Dextrose in 5x its weight of water, boil, cool to approximately room temperature, and mix the sugar solution into your beer. Direct Pitch or Rehydrate: To hydrate yeast, first, sanitize yeast brick and scissors. Use 10 grams of sterilized tap water, between 85-95°F (29-35°C), per gram of yeast. Sprinkle yeast onto the water. Allow the slurry to stand undisturbed for 20 minutes and then swirl. Use small amounts of beer to adjust to within 10°F (6°C) of beer temp. Mix yeast slurry into beer. Allow carbonation to develop for two weeks between 60-78°F (16-26°C) before testing for adequate carbonation. Optimum Fermentation Temp: 53-77°F Flocculation: Very High Attenuation: 95-100% Gluten-free
$74.99 $4.99
-
Speidel 1100, 1000mm Diameter FO Dish Bottom Variable Volume Tank w/ Lid | V0580
Please note: the primary image is an example image and does not exactly match this custom tank. See the technical drawing below for exact specifications. The FO Variable Volume tank is Speidel's flagship Variable Volume tank for storage. This preconfigured tank comes with: Volume: Sealed, 1100 L. Open top, 1183 L Variable Capacity Tank includes Floating lid and Heavy Duty White Rubber Gasket Max Coverage Jacket: 2.0 m² (4x 1" MPT connections) Complete Drainage Dish Bottom Lifting Arm Reinforced Racking valve 1.5" TC connections Thermometer and Thermowell Combo included NW10 Gland for Sample Valve (Valve not included) Key Features Available in 28 sizes covering 6 different tank diameters from 1,100L to 15,200L (larger tanks available with special shipping arrangements) 1,100L & 1,650L Tanks equipped with 1.5" TC racking and drainage ports. All other tanks equipped with 2" TC. Larger fittings available by request Reinforced racking ports prevent tank wall flex and can support the weight of a tank mixer. All tanks have welded-on mounting points for lid lifting arms. Tanks from 1,650L include a lifting arm; from 2,200L up the arm is winch-operated View the resource for more information on the key features of all Speidel Tanks.
$5,849.99 $4,972.49
-
Heavy Duty False Bottom | BrewZilla | DigiBoil | 65L
NOTE: This accessory is designed exclusively for 3-vessel brewers who want to use the BrewZilla or DigiBoil as a mash tun. It is not meant to be used alongside a malt pipe, and it is not intended to be an upgrade or replacement to the BrewZilla's standard false bottom protection screen. If you're a 3-vessel brewer and want to use the BrewZilla or DigiBoil purely as a mash tun, this is false bottom will give you more volume compared to mashing with a malt pipe. Designed for use with DigiBoil electric kettles or BrewZilla all-in-one systems. Unlike two-piece false bottoms you may find, this unit is welded together for maximum strength. It will easily withstand as much grain weight as you could possibly fit in the vessel. Features welded handles to easily remove the false bottom when cleaning. Compatible with 65L DigiBoils and Gen 3/4 65L BrewZillas. Dimensions: Diameter: 15.35" (390 mm) Height: 1.88 (48 mm) Approximate Dead Space: 1.5 gal (5.7 L) KegLand Part Number: KL27717
$87.99 $65.99
-
MB® 30 bbl Conical Unitank Fermenter | T.C. Sanitary Ports | All Fittings Included | Carbonation Stone | Passivated Ready to Use | American Engineered | Ships from USA
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation Over 25% extra headspace with a working volume of 30 bbl and max volume of 37.75 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks. 3” of internal insulation between tank and outter jacket when the industry standard is 2” Separate cone and tank cooling jackets with individual Pt100 Thermocouples DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish All Features: 304 stainless steel construction Horizontal racking arm and carbonation stone The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI 2x Pt100 Thermocouple interfaces at top and bottom (3x Pt100 on 30 bbl & up) Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 30 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 137", With Blowoff Pipe: 142" Tank Diameter: 69" Empty Weight: 1,499 lbs Working Volume: 30 bbls Max Volume: 37.75 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 11,109 in² (7.167 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
$14,999.99 $12,749.99
-
MB® 15 bbl Conical Unitank Fermenter | T.C. Sanitary Ports | All Fittings Included | Carbonation Stone | Passivated Ready to Use | American Engineered | Ships from USA
Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with dedicated CIP port, hopping port, and blowoff—all fittings included! Separate cone and tank cooling jackets with 3" of internal insulation ~20% extra headspace with a working volume of 15 bbl and max volume of 17.75 bbl Ships domestically from within the contiguous United States MB offers a full range of professional level conical fermenters and brite tanks. Our stainless steel tanks represent an amazing overall value, boasting exquisite construction and a very impressive feature set. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our conicals between 1 and 120 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our fermenters have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Impressive Features Built from quality-checked 304 stainless steel, our tanks boast a hefty list of features. Here are some key features that are not always included on all tanks. 3” of internal insulation between tank and outter jacket when the industry standard is 2” Horizontal racking arm and carbonation stone Separate cone and tank cooling jackets DIN Rotating racking arm for safety and ease of use 4” TC top hop port with handle Carbonation Stone included with all tanks 2” Bottom valve for easier trub removal (3.5 bbl and up) CIP spinning spray ball and piping built-in (3.5 bbl and up) 25% head-space above stated volume Industry standard 2b finish All Features: 304 stainless steel construction The outer shell is 2 mm thick with a brushed finish The inner wall is 3 mm thick with smooth ground welds, 2B finish and passivated Includes a glycol jacket which is dimple welded and 1.5 mm thick Oversized for 25% average headspace Pressure Relief/Vacuum Breaker valve rated at 1 Bar / 15 PSI 1 x Pt100 Thermocouple Perlick style sample valve Spinning CIP cleaning head and separate piping Rotating racking arm upgraded with DIN fitting for increased reliability Analog temperature gauge Oversized yeast dump port Sealed Pressure Gauge Hop port Carb stone Separate blow-off pipe Side man-door Ladder rack (7 bbl and up) Shadowless Manway Specifications for 15 bbl Conical: Grade 304 Stainless Steel Internal Finish: #2B Tank Height: 104", With Blowoff Pipe: 109" Tank Diameter: 58" Empty Weight: 1,058 lbs Working Volume: 15 bbls Max Volume: 17.75 bbls Working Pressure: 1 Bar (15 psi) Jacket Surface area: 5,447 in² (3.514 m²) All ports are 1.5" TC except for 4" TC Lid Hopping Port, 4" TC CIP Port (inner 1.5" TC to CIP ball adapter), 2" TC PVRV, 2" TC Drain Outlet, 2" TC Pressure Gauge, DIN 65 Rotating Racking arm (w/ 1.5" pipe), and 3/4" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.
$10,899.99 $9,264.99
-
MB® Replacement Seal Kit for Two Stage Heat Exchanger | 15 to 30 bbl
Replacement seals for 6m² Two Stage Heat Exchanger sized for 15 to 30 bbls.
$439.99 $329.99
-
Kreyer SR 13 | Inline Cooling and Heating Unit | Wine and Must | Tube in Tube Heat Exchanger | 11.7 Ton
Use: The most versatile cooling and heating tool a winery can own Pump must or wine throught the machine | Heats or cools inline The only practical solution for cooling or heating crushed grapes 2" ID stainless steel tube-in-tube heat exchanger allows crushed grapes to pass through Use your choice of pumps to move product through SR chiller/heater Made in Germany | Used for over 40 years in French and German wineries Features: Plenty of Power | 11.7 Tons (140,400btu) of Cooling power Wide Temperature Range | 28F or up to 113F Moves Where You Need It | Rolls on four locking casters Control Temperatures with Ease | Digital Thermostat Top Class Components The most versatile cooling and heating tool a winery can own. Whether you want to cool crushed grapes to cold soak temperatures, heat a sluggish ferment, heat a tank for ML without having a dedicated hot water loop, or cold stabilize a tank quickly, the SR is an extremely useful machine. It often eliminates the need for a separate heating loop in your winery. It is loved for quickly doing cold stabilization on one tank at a time. It is more effective at cooling crushed grapes than trying to cool in a tank. Because it is a closed system it can be used with sparkling wine or cider without losing carbonation. Most wineries who use an SR for cooling/heating specific tanks or vats also have a dedicated main chiller connected to their permanent cooling loop. However the SR can also act as the back up chiller in case your main chiller goes down. You can use the SR to chill a tank, such as a large HDPE tank. Connect that tank to your glycol loop and if your main chiller goes down you already have a backup plan in place. Made in Germany, thousands of Kreyer SR chillers have been in use for over 40 years in France and Germany. The SR is not like a regular glycol chiller where a cooled bath is pumped into the tank jackets. The SR features a large, tubular heat-exchanger that is completely insulated. Your product is pumped through the inner tube while heat or cold travels the opposite direction through the outer tube. The top half of the SR houses the compressor for cooling while heating is performed in the Heat-Pump operation mode. The SR is uniquely designed unit for changing the temperature inline of crushed grapes, wine, sparkling wine, water, cider, fruit juice and distillates. By setting the temperature, you can rely on the SR to maintain tank temperature for as long as needed, in either heating or cooling mode. The case of the unit as well as all parts that come in contact with the treated medium are made of stainless steel. The ventilation grills are lacquered in black. Due to its four wheels, this SR unit is easy to maneuver. This allows the user to cool or to heat single tanks or other containers, as required. For example: starting a stopped fermentation by heating the tank content. Your choice of external pump is controlled by the SR’s control panel. The cooling units of the SR series are available in seven different sizes. This is 11.7 Ton model. Smaller and larger machines are available for quote. Applications: Direct cooling or heating of must at the beginning of fermentation Tartaric stabilization of wines Warming up wine from storage to bottling temperature Biological reduction of acids Regulation of fermentation temperature Cool storage of wine until bottling Suitable for sparkling wine and carbonated beverages (closed loop with no carbonation loss) Cooling of liquids with particles such as unfiltered juice Air cooling of the cellar in combination with additional equipment (thermo-fans and accessories) Check out these features: Cools or Heats 11.7 Tons (140,400btu) of cooling power Can maintain temps from 23F to 113F. 230V 60Hz 3 phase supply voltage drawing 40 amps Mobile unit with 4 casters, two locking Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing Control an external cellar pump from the SR's control panel Evaporator coil made of stainless steel Automatic control of the wine pump according to set temperature Digital Thermostat Lifting/Crane Hooks for transport Panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controller display shows temperature accuracy up to 0.1 degree Celsius. 41.3"L x 41.3"W x 84.6"T Empty Weight: 992 lbs Unit has 2" tri-clamp inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note: This unit REQUIRES 230 v Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.
$47,520.00 $30,888.00
-
Brewtools | MiniChilly 17 | Multi-Tank Glycol Chiller | 1 HP
The Quantor MiniChilly 17 is highly recommended by Brewtools for chilling their F-series Unitanks. These glycol chillers are compact, high-quality units often used in professional settings. Made from stainless steel components and easy to install. They feature an integrated pump with a stirring function that ensures even temperatures throughout the reservoir. Rather than individual pumps for each fermenter, this unit is intended to be provide cooling solution to a single chilling loop where each fermenter will call for glycol circulation independently via solenoid valves. The MiniChilly 17 is recommended for up to 8 x 150L fermentation tanks of which 3 are cold crashed, or up to 4 x 300L fermentation tanks of which 1 is cold crashed. Check out the Brewtools cooling system page for setup details and recommended accessories for building a chilling loop with the MiniChilly 17. Specifications: Controller: EWplus 961 Power connector: Schuko - C19 Power: 790W (1+ HP) Refrigerant: R290 (Propane) Cooling capacity @ 32°F: 1000W (3412 BTU/hr) Cooling capacity @ 59°F: 1650W (5627 BTU/hr) Tank volume: 12.68 gal Dimensions: 29.5" x 16.5" x 23.6" 115V Manufactured in Germany by Quantor/Kreyer. NOTE: The product must stand still 24 hours before use after installation.
$4,069.99 $3,459.49
-
FermZilla Tri-Conical Butterfly Valve - 2 in. x 3 in. T.C.
Compatible with the 27L and 55L FermZilla Tri-Conical Series or any 2" or 3" T.C. fittings. This valve comes standard on the Tr-Conical FermZillas where the bottom of the tank attaches to the collection container. KegLand Part Number: KL26505
$43.99 $37.39
-
KOMOS® Double-Wide Kegerator Replacement Door
Scuffs, scratches, and dings happen. Keep your KOMOS Double-Wide kegerator looking brand new with this replacement door.
$82.99 $70.54
-
Drip Tray | Countertop Drip Tray | Removable Grill | Stainless | 19.6 in.
Stainless steel counter top style drip tray. Removable grill and pressed holes for easy plumbing. Dimensions: 19.6" Long x 6.7" Wide x 0.6" Deep Kegland Part number: KL13178
$43.99 $37.39
-
Temp Twister Lid for Bucket Buddy Fermenters | 35L
This flat lid with pre-drilled holes allows you to easily add a Temp Twister Cooling Coil to your 35L Bucket Buddy fermenter. It also has holes for your stopper & airlock (included with the Bucket Buddy) as well as a Thermowell so you can control the circulation of cooling solution with a Temperature Controller. The lid is also compatible with 35L BrewZillas and DigiBoils. If you're fermenting in the Bucket Buddy with built-in heating element, we recommend plugging the unit into the heating outlet of your temperature controller and leaving the power switch turned on. This will allow the temp controller to provide power to the unit only when heating is needed and it will cut the power as soon as you're back to your set temperature. Using the Bucket Buddy's controller to maintain the heating set temp and using a separate controller to maintain the cooling may result in heating and cooling cycling at the same time. NOTE: The pre-drilled holes are meant for specific sizes of Duotight bulkheads and the stopper included with the Bucket Buddy fermenter. All holes need to be occupied in order to protect your fermentation from outside contaminants. Depending on the placement of the Temp Twister, you might need to shorten the inlet/outlet tubes on the outside of the fermenter using a Pipe Cutter. Lid only. Other accessories must be purchased separately. You Will Also Need: Temp Twister Cooling Coil FermZilla Thermowell Temperature Controller KegLand Part Number: KL28103
$38.49 $32.72
-
Double T Bar Draft Tower - 6 Tap - KOMOS®
Stainless steel Double T Bar draft tower for 6 faucets. Perfect for upgrading an existing KOMOS Double-Wide Kegerator with two individual towers or designing your own home bar or kegerator. Mounting hardware, tower collars and gaskets included. The tower does not include faucets, shanks, tap handles, or draft tubing. To assemble the tower, remove the dust caps on either side and remove the foam insulation. Start with the inner most shank hole on either side and work your way outward. We recommend installing each shank and attaching the draft tubing before moving on to the next shank hole. The top section of the tower is 5" in diameter, so most people should be able to reach inside to install the shanks by hand or with the help of a draft wrench. When all the shanks have been mounted, reinsert the foam insulation. The tower may come with more insulation than needed and may need to be cut thinner before reinserting. We recommend using the Double Offset Shank Wrench to help with assembly. Tower Dimensions: 29.5" L x 5" D x 16" H. The centers of the columns are approximately 16" apart. Not compaitble with the KOMOS Olympus III kegerator.
$329.99 $247.49
-
Replacement Table Spacer for Cannular Pro Can Seamer
Replacement table spacer for the Cannular Pro Semi-Auto Can Seamer (CAN110). Suitable for 500mL, 330mL aluminum cans and tin cans. It is not compatible with the manual seamer model (CAN100). KegLand Part Number: KL17879
$27.49 $23.37
-
NukaTap® Stainless Steel Beer Faucet | Matte Black Finish | Punisher Edition | Forward Sealing
The NukaTap Punisher Edition beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it so the inside doesn't have a chance to get sticky, making cleaning much easier. It also reduces the chance of off flavors transfering to your beer while you pour. Similar to the Intertap line of faucets, but with improved laminar flow and reduced first pour foam due to its lower thermal mass. The Nuka Tap is compatible with all Intertap spout accessories. NOTE: The Punisher Edition faucet features a matte black body with stainless spout. Other models are pictured as example photos. For the all black NukaTap faucet, see the Stealth Bomber Edition. Faucet body & lever made from stainless steel Shuttle made from TPV O-rings made from EPDM Lever collar & friction bonnet made from brass Matte black finish / brushed stainless spout NSF approved Kegland Part Number: KL26482 Please note: this is a painted faucet and as such needs to be used, cleaned, and handled with care. Clean the faucet gently by hand and avoid tossing it into a bucket with other draft parts. Excessive soaking in caustic cleaners will damage the finish. For these reasons, we do not recommend the Punisher Edition faucets for professional settings.
$40.49 $30.37
-
Monotight Push-In Fitting - 6.35 mm (1/4 in.) x 3/4 in. BSP
Connect EVABarrier tubing to 3/4" male threads with this Monotight adapter. Compatible with EVABarrier 6.35 mm OD Tubing. Monotight brings the same superior quality as Duotight push-in fittings but more appropriately sized for applications including water treatment equipment, water filters, reverse osmosis fittings, and more. In addition, they are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL1388
$3.29 $2.14
-
Duotight Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. BSP
This Duotight fitting with 1/4" male thread is a great option for connecting gas line to regulators and manifolds that have 1/4" FPT. Comes with seated O-ring. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL14441
$3.29 $2.14
-
KOMOS® | Corny Keg O-Ring Kit
Put your ball lock or pin lock homebrew keg back into perfect working order with the KOMOS corny keg rebuild kit. Includes brand new o-rings for the keg lid, dip tubes, and keg posts / body connects. Comes in a convenient zip lock bag.
$4.49 $3.37
-
MB® MiniChilly | Multi-Tank Glycol Chiller | Bulkhead Sets for 10 Fermenters | Digital Temp Control | Rolling Casters | Stainless Steel Enclosure | 1.2 HP
The German made 1.2 horse power MB Chiller is an ideal solution for the avid home winemaker looking to chill up to 10 fermenters at once. The idea of the MiniChilly is that for each fermenter you want to a chill a pump kit is added. A pump kit (GLY35) includes a submersible pump that is placed in the cold bath of the Mini Chilly along with a digital controller that is placed next to your fermenter. Silicone tubing is included to make the connections. The digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature. In this way each tank can be set at different temperatures. The MiniChilly is made by Quantor/Kreyer of Germany who is the largest manufacturer of glycol systems for breweries and wineries in the world. Made with high quality manufacturing and components, the MiniChilly is a durable system for many years of problem-free wine making. The unit features a stainless steel case with stainless 3/8" barbs in the top that allow for a clean connection of the silicone tubing that will run from each pump to each tank. The MiniChilly is able to chill its reservoir down to 21°F when a 30% glycol solution is used. The compact size and included casters make it easy to move around the winery when needed. Applications: Cooling of fermentation and storage tanks Cooling must and wine for clearing and cold stabilization Cooling rooms and storage halls with additional fan coils Capacity: Many chiller ratings are based on the theoretical power of the compressor, while the cooling capacity of the MiniChilly is rated at a realistic ambient temperature. This is much more useful for predicting the MiniChilly’s performance in real world applications. Of course, you could cool a greater number of smaller tanks but you’re ultimately limited to the 10 connections. Actual cooling capacities will vary based on the insulation of the tank. For the examples below we assume neoprene or better. Cooling Capacity Example: Up to 10 x 110L well-insulated tanks fermenting at 68°F in 80°F ambient temperature. For every fermenter you want to cold crash remove 4 fermenting fermenters from the capacity. Set Up: In order to hook up the MiniChilly to your fermenter or tank's cooling system, you will need 4 lengths of tubing per pump. All tubing connections should be secured with hose clamps. Length 1: Submersible pump outlet to inner barb of 1st bulkhead Length 2: Outer barb of 1st bulkhead to cooling system inlet Length 3: Cooling system outlet to outer barb of 2nd bulkhead Length 4: Inner barb of 2nd bulkhead to MiniChilly reservoir (should drain freely, no connection necessary) Technical Characteristics: Power: 110V-1Ph/50-60Hz Compressor Power: 1.2hp/900watts Cooling Capacity at 32°F glycol temp and 90°F Ambient Temp: 1.05 KW/1050 Watts (60Hz 110V) Cooling Capacity at 60°F glycol temp and 90°F Ambient Temp: 1.92 KW/1920 Watts (60Hz 110V) Stainless Steel Unit Water Temperature Range: 21°F - 86°F (-6°C - 30°C) Ambient Temperature Range: 50°F - 90°F (10°C - 32°C) Refrigerant R134a Free Glycol Water-Bath for Mini-Pumps Fittings 3/8" for Plastic Tubes of Individual Pumps Solid Wheels w/ Breaks for Easy Mobility Universal C19 Plug On/Off Switch Water-Level Sight-Tube Grooves for Individual Pump Cables Safety Inner Separation Water Side from Electric Side Tank Capacity: 12.68 gal. (48 L) Dimensions: 29.5"L x 15.75"W x 21.75"H Weight: 112.5 lbs Made in Germany CE Certified
$3,699.99 $2,774.99
-
The Hops List - 2nd Edition
Introducing the Second Edition of world’s most comprehensive beer hop dictionary. The Hops List – The perfect tool for passionate brewers and craft beer drinkers. Discover new hop flavors and aromas from around the world. The Hops List is the largest collection of hops information ever compiled. With it you’ll have access to variety descriptions, analytical data, tasting notes, substitutes, style suggestions and lots more on a staggering 339 unique varieties. Inside you’ll also discover insights from brewmasters who have worked at some of the world’s most prestigious breweries like Dogfish Head, Founders Brewing Co. and Brooklyn Brewery among many others. Inside they reveal some of their favorite hop varieties as well as tips on how to use them best. The Hops List is a fantastic resource for professional brewers, amateur brewers and craft beer drinkers who are looking for an exhaustive resource on just about every beer hop on the planet. Features: 339 Hop Varietals Tasting notes, origins, acid and oil data, and more Tips from professional brewers
$29.99 $25.49
You have seen 624 out of 744 products