Dozens of fittings and valves for almost any winemaking application.
Fittings & Valves
Shop By Collection
-
Stainless - 2 in. T.C. Check Valve (1 PSI)
This is a Stainless Steel one way Check Valve. It has 2" T.C. Fittings on either side, and releases pressure at ~1 p.s.i. Can be used to inhibit a siphon in certain applications, or to vent gas pressure in a tank.
$109.99 $49.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 18" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 18" long.
$34.99
-
Stainless Tri-Clamp Cross - 1.5 in.
This cross fitting features 1.5" T.C. connections at all ends and is made from high-quality stainless steel. 1.5" tri-clamp 5.75" long x 5.75" tall Made from 304 stainless steel
$32.99
-
Stainless Tri-Clamp Sample Valve Shank | 1.5 in. T.C. x Beer Faucet Shank | Intertap® | NukaTap®
These long shanks are suitable to attach to large commercial fermenters and brite tanks with a 1.5" Tri-Clamp Port. Being removable and completely washable it makes this device extremely easy to clean and sanitize before use. Ideally used with the NukaTap Flow Control Faucet with Self-Closing Spring. Please note standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Also compatible with Intertap, Perlick, and other faucets. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
$21.99
-
Stainless Tri-Clamp Ferrule | 2.5" T.C.
2.5" TC Ferrule is used to weld in a TC connection anywhere you need one! AiSI304 Stainless Steel.
$13.49
-
Gasket for 2in Butterfly Valve
Replacement interior gasket for the H661B 2" Butterfly Valve
$14.49
-
White Valve Seat for 1.5 in. T.C. Sample Valve
Replacement valve seat for plunger-style 1.5" tri-clamp sample valve. Compatible with FF120.
$6.59
-
BrewBuilt® 1.5" Tri-Clamp Blowoff U Barb
The Blowoff U Barb eliminates tubing kinks by extending over the shoulder of a stainless conical fermenter and directing tubing straight downward. This gives you the advantage of a stainless steel blowoff cane, but is much easier to clean and sanitize. The 5/8" OD barb is perfect for forming a tight seal with 1/2" ID silicone tubing. Measures approximately 4" from T.C. to barb. 1.5" T.C. 5/8" OD barb Made from 304 stainless steel
$27.49
-
ForgeFit® Stainless Beer Thread Adapter | 5/8" Female Beer Thread x 1.5" T.C.
Convert standard 5/8" beer thread to 1.5" tri-clamp. Made from 304 stainless steel.
$16.49
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 12" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 12" long.
$26.49
-
Stainless Steel Camlock - Male Cam x 1.5 in. T.C.
Camlock to tri-clamp adapter. Perfect if you prefer camlock fittings on your tubing lines and own a brewing kettle, pump, or fermenter with tri-clamp fittings. Male camlock fitting x 1.5" tri-clamp. Made from 304 stainless steel. KegLand Part Number: KL20237
$14.49
-
ForgeFit® Stainless Tri-Clamp End Cap | 2.5"
End cap for 2.5" tri-clamp fittings. Made from 304 stainless steel.
$6.99
-
ForgeFit® Stainless Tri-Clamp Hose End | 1.5" Barb x 1.5" T.C.
This ForgeFit oversized barb hose end is intended for use with 1.5" professional beverage tubing. This is the same fitting we use on our pre-fabricated beverage hose assemblies. When designing this fitting, we made sure it has all the features we wanted in a barb intended for professional applications. The hose barb has a shoulder to keep the hose from creeping up towards the fitting end. The long barb promotes solid engagement with the hose and the end has a gentle internal taper to transition the product flow smoothly from the fitting to the tubing. 1.5" tri-clamp connection with 1.52" OD 3.49" long barb. Overall length 4.95". 3A certified 304 stainless.
$32.99
-
BrewBuilt® Whirlpool Return Fitting | 1.5" T.C.
The BrewBuilt Whirlpool Return Fitting allows you to recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. Install it in any tri-clamp kettle's thermometer port and attach your preferred valve to the side inlet. The front of the fitting can be capped off with a 1.5" T.C. end cap, or you can pair with the BrewBuilt Thermowell Offset to install a thermometer or temperature probe.
$54.99
-
BrewBuilt® Tri-Clamp Spunding Valve | 1 BAR | 0.3–14.5 PSI
The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Adjustable from 0.3–14.5 psi Made from 304 stainless steel 11.75" H x 4" Ø For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
$179.99
-
Tri-Clamp Spunding Valve | Integrated Pressure Gauge | Replacement Polycarbonate Cup Reservoir
Replacement Polycarbonate Cup if you happened to damage or lose the reservoir for the 1.5" Tri-Clover Spunding Valve during routine cleaning and replacement of sanitizer solution post-fermentation. KegLand Part Number: KL27472
$16.49
-
FermZilla Stainless Tri-Clamp Reducing Elbow | 3" x 1.5"
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Stainless steel tri-clamp reducing elbow. Specifically manufactured as an alternative for the FermZilla 27L and 55L Tri-Conical bottom dump port. If you would like to bypass the 3" x 2" butterfly valve and collection container on your FermZilla Tri-Conical, you can use this reducing elbow to go directly to a 1.5" tri-clamp valve. KegLand Part Number: KL29469
$43.99
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 1.5"
Adapt any 3" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 3" T.C to 1.5" T.C. Perfect for pairing with the BrewBuilt X3 Conical's 3" bottom port and attaching 1.5" tri-clamp fittings. 1.5" x 3" tri-clamp 7" tall Made from 304 stainless steel
$44.99
-
Stainless - 1/4" Ball Valve Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Here at MoreFlavor! we think this ball valve is actually easier to clean than 3-piece ball valves (such as our H602D).
$16.49
-
Stainless Nipple - 3/8"x1" Threaded (Close)
These are typically used for connecting Ball Valves to couplers welded into tanks. “Close” thread means there is no space between the opposing threads
$3.29
-
Stainless Coupler 3/8" FPT x 1/2" FPT
Stainless Reducing Coupler 3/8" FPT x 1/2" FPT
$5.49
-
Stainless Half Coupler - 3/8"
Half Coupler with 3/8" Female Pipe Thread. Half couplers have thread for insertion from one side only.
$3.99
-
Stainless Half Coupler - 1/2"
Half Coupler with 1/2" Female Pipe Thread. Half couplers have thread for insertion from one side only. 304 stainless. Weld into place. You will need to punch a 7/8" hole to install.
$5.49
-
Stainless Half Coupler 1"
Stainless Half Coupler with 1" Female Pipe Thread. Half couplers have thread for insertion from one side only.
$5.49