Bottling
-
EnoItalia Wine Bottle Filler | Vacuum Filler | 4 Spout | Benchtop Bottle Filler | Stainless Steel | 650L/h Fill Rate | 110V
Vacuum bottle filler for use with wine, olive oil, or uncarbonated beer Air is cleared from each bottle before filling, reducing oxygen exposure Adjustable fill nozzles and support rack to fit your bottle size and fill level Variable fill speed to match your bottling pace High-quality 304 stainless steel construction Made in Italy by EnoItalia We like this robust vacuum filler from EnoItalia because it combines the low oxygen benefits of vacuum filling with the strong fill nozzles and frame of traditional Italian bottle fillers. This high-quality vacuum filler is the ideal choice for bottling uncarbonated beer or wine with minimal oxygen exposure. Air from the bottle is automatically extracted through the filling head and then liquid is drawn through the system and into the bottle via a vacuum pump. This greatly reduces the oxygen exposure that occurs with other fillers. The support rack and fill nozzles are adjustable so you can adapt it for your bottle size and desired fill level. Fill speed can also be adjusted with the digital display and vacuum regulator, allowing you to quickly set the desired vacuum level for each product. After each bottle is filled, excess liquid is returned to the cylinder. When the cylinder fills up, the stainless steel float will rise and shut off the vacuum pump. Designed entirely in stainless steel with high-quality components, this filler was designed to stand up to intensive, professional-level use. This unit is only intended for use with still beverages. It is not compatible with carbonated beer, cider, or sparkling wine. Features: 304 stainless steel construction Digital adjustment display 1.5" tri-clamp for product aspiration and circuit emptying DIN 15 connections for emptying filling nozzles Adjustable support rack Adjustable feet Lifting handles Capacity: 650 lt/h (171 gal/h) Power: 110V / 60 hz Please note: this unit comes with a bare cord. You will need an electrician to wire the appropriate plug.
$3,999.99 $3,438.04
-
Zeus Corker | Special 75 Floor Corker | Large Format Wine Bottle Corker | Ferrari
Small to large format bottle corker works for 375 mL up to 18 L bottles High-quality stainless steel construction throughout with heat-treated steel jaws 4 adjustable pivots to allow the use of corks with different heights and the use of champagne corks as well 6 adapters for different diameter bottle heads included Made in Italy by Ferrari The Zeus "Special 75" floor corker from Ferrari offers an exceptional range of bottle compatibility, accepting sizes ranging anywhere from 375ml to 18L. The adjustability of the Zeus is unmatched. Not only is it compatible with an extremely wide range of bottle sizes, it can be used with both standard and champagne style corks, and includes 6 adapters for different diameter bottle heads. If you're corking regular sized bottles and want the option to cork large format bottles as well, this is the corker for you! Compatible Sizes: Champagne Bottles: 375 ml to 15 L Bordolesi Bottles: 375 ml to 18 L All Bottles: Height Max 75 cm, Diameter Max 22.5 cm Features: Suitable for any bottle with maximum height 75 cm and maximum ø 22.5 cm Suitable for any cork with maximum height 60 mm and maximum ø 42 mm Head with heat-treated steel jaws 4 adjustable pivots to allow the use of corks with different heights and the use of champagne corks as well The pins slide on spherical bearings A pedal lever grants an easy positioning of the bottle 6 adapters for different bottle heads: external diameter from ø 28 mm to ø 50 mm Can be completely disassembled for easy maintenance Rotating anti-skid feet, suitable for any surface Back wheels for extra mobility Handle grip for easy transport Weight: 97.5 lbs 61" H x 20.5" W x 22.5" D
$5,045.99 $4,289.09
-
EnoItalia Wine Bottle Filler | 6 Spout | Stainless Trolley Cart | Electronic Level Sensor | Integrated Pump | 980L/h Fill Rate | 220V
The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D Runs on 220V Power, and comes with a bare cord. You will need an electrician to come and wire the appropriate plug.
$4,689.99 $3,898.79
-
Marchisio Wine Bottle Filler | 6 Spout | Benchtop Bottle Filler | Level Gauge | Stainless Steel | 1.5 in. T.C. | 810L/h Fill Rate
Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5"H x 36"W x 18.5"D Reservoir is approximately 58 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.
$3,589.99 $2,984.89
-
Marchisio Wine Bottle Filler | 4 Spout | Benchtop Bottle Filler | Level Gauge | Stainless Steel | 1.5 in. T.C. | 540L/h Fill Rate
Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5" H x 23" W x 18.5" D Reservoir is approximately 33 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.
$2,694.99 $2,241.04
-
ILTEC Ultrafiller | Standard Nozzle with Bracket | For Ultrafiller 2 & 4
Standard filling nozzle and bracket for the Ultrafiller 2 and 4.
$186.99 $167.19
You have seen 54 out of 54 products