Hose Clamps & Cleaning Balls
-
Butterfly Tubing Clamp (Medium) - Fits 3/4" OD Hose
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.
$1.79
-
Butterfly Tubing Clamp (Medium) - Fits 1/2" OD Hose
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize. Please note, as the reviews will also tell you, this is a clamp that will fit 1/2" OD tubing. If you are looking for a clamp for 1/2" ID (with 3/4" OD) choose the H955 clamp.
$1.69
-
Hose Clamp | 1/4" to 5/8" OD Tubing Clamp | Stainless Steel
Stainless steel small hose clamp will fit hoses with 1/4" through 5/8" OD.
$1.69
-
Butterfly Tubing Clamp - Fits 5/8" OD Hose
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.
$1.69
-
Cleaning Ball for Tubing (1/2 in. - 2.5 in. ID)
Cleaning balls are super handy for scrubbing the inside of your transfer tubing. Simply insert into the end of the suction-side tubing connected to your pump and turn the pump on. Be careful not to draw the ball in to the pump head. For the outlet side of the pump, disconnect the tubing from the pump, insert the ball, reattach and turn on the pump. for best results repeat several times on each side. If stains persist, fill your lines with a warm PBW solution and let sit for about an hour before scrubbing again. Available in sizes for 1/2", 1", 1.5" and 2.5" inner diameter tubing.
$6.59 - $43.99
-
Hose Clamp | 3/4" to 1-1/4" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel
Stainless hose clamp fits hoses with outer diameters from 11/16" to 1 1/4". These are heavy duty tubing clamps that don't strip out easily.
$2.59
-
Hose Clamp | 3/8" to 7/8" OD Tubing Clamp | Stainless Steel
Stainless steel hose clamp will fit 3/8" to 7/8" Tubing.
$1.79
-
Hose Clamp | 1-1/4" to 2-1/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel
A heavy duty hose clamp for large OD tubing. As effective as a pre-formed clamp but without the expense or permanence.
$2.99
-
Hose Clamp | 2-1/4" to 3-1/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel
Stainless steel screw clamp. High quality. Fits tubing with an outer diameter between 2.25 and 3.12 inches.
$3.49
-
Butterfly Tubing Clamp (Large) - Fits 2 3/8" OD Hose
Functions the same as a standard Hose Clamp, however rather than needing to find a screwdriver (or dime!) for every adjustment you can easily tighten by hand. As an added bonus, this also has a significantly smoother inside to the clamp, which will not tear up your tubing nearly as much as a standard hose clamp! Ideal for situations where you need to remove tubing from fittings to sanitize.
$2.79
-
KOMOS® | Stainless Butterfly Hose Clamps | 1/2 in. to 1 in. | 10-Pack
These stainless steel butterfly hose clamps are the ideal choice for connecting silicone tubing to quick disconnects, pumps, and more. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 1/2 in. OD to 1 in. OD tubing. Actual size of the clamp is 14-25 mm (0.55-0.98 in.). Comes in a convenient zip lock bag.
$10.99
-
Stepless Hose Clamp - 1/2 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/2" OD tubing (12-14 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06705
$10.99
-
Hose Clamp | 2-3/4" to 3-5/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel
Strong stainless screw clamp that fits tubing with outer diameter between 2.75 and 3.62 inches.
$3.99
-
Stepless Clamp Tool
Clamp tool for stepless clamps. Kegland Part Number: KL07054
$10.99
-
Stepless Hose Clamp - 3/4 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 3/4" OD tubing (17-20 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06736
$10.99
-
Stepless Hose Clamp - 5/8 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/8" OD tubing (14-16 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06712
$10.99
-
Stepless Hose Clamp - 5/16 in. - 3/8 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/16" to 3/8" OD tubing (7-10 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06682
$10.99
-
Stainless Butterfly Hose Clamp | 5/8" to 1.5"
This stainless steel butterfly hose clamp is perfect for use with braided/reinforced silicone tubing. The butterfly thumb screw allows for toolless tightening and untightening, so you can build out or break down your system without rummaging through the toolbox for the right screwdriver. Fits 5/8" to 1.5" OD tubing. Actual size of the clamp is 21-38 mm (0.82" - 1.49"). KegLand Part Number: KL24440
$2.79
-
Stepless Hose Clamps - 1/4 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/4" OD tubing (6-8 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06675
$10.99
-
Stepless Hose Clamp - 7/16 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 7/16" OD tubing (10.5-12.5 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06699
$10.99
-
Stainless Steel Hoffman Clamp | Flow Control Pinch Clamp for Flexible Tubing | 30mm | 1"
Hoffman Clamps, or screw compressor clamps, are used to control the flow in flexible tubing. The clamp has a machined adjustment screw to permit accurate regulation of the flow. All corners are rounded to prevent cutting of the tubing. This can be particularly useful when regulating the flow of sparge water, collecting sweet wort from your mash tun, or liquid management applications of a still. Max Tubing OD: 30mm / 1.18" KegLand Part Numbers: KL37891
$6.59
