Reinforced Vinyl Tubing

Reinforced, FDA approved, food grade tubing for use with our pumps. Reinforced Vinyl is rated up to 158°F and 200 PSI. This type of tubing is particularly useful when putting backpressure on a system. Standard Vinyl tubing and Silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or even explode if too much pressure is used! Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 1/2" (12.7mm) Outer Diameter (OD): 0.76" (19.2mm) Working Pressure: 200 PSI Weight: 0.13 lbs/ft  

Read more less

Reinforced vinyl tubing is the ideal beer tubing option for transferring your homebrew that is below 158°F, and is also great for water applications (such as to and from your wort chiller). This food grade 3/4 in ID Reinforced Vinyl Tubing is rated to 158°F and 150 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is essential when putting back pressure on a system. Standard Vinyl tubing and Silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or explode if too much pressure is used. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 3/4" (19.1mm) Outer Diameter (OD): 1.03" (26.2mm) Working Pressure: 150 PSI Weight: 0.20 lbs/ft  

Read more less

Use this reinforced vinyl tubing any place in your brewing system where you want an added layer of protection from tubing failure. This 1" ID Reinforced Vinyl Tubing is food-grade approved up to 158°F. It is often used in a in a brewing system where higher pressures will be used or for commercial applications. Because it is reinforced, it is less flexible than standard vinyl tubing. Tubing has a max working pressure of 125 PSI. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 1" (25.4mm) Outer Diameter (OD): 1.35" (34.4mm) Working Pressure: 125 PSI Weight: 0.33 lbs/ft  

Read more less

Reinforced vinyl tubing is a great option for transferring your homebrewed beer. This food grade 3/8" ID Reinforced Vinyl Tubing is rated to 158°F and 40 PSI. Use this tubing anywhere you want the extra security that your tubing will not kink, or burst. This type of tubing is useful in your setup where you want extra tubing strength, but your system pressure won't exceed 250 PSI. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 3/8" (9.5mm) Outer Diameter (OD): 0.61" (15.5mm) Working Pressure: 250 PSI Weight: 0.10 lbs/ft

Read more less

Our reinforced vinyl tubing is an excellent option for transfering liquids under 158°F that require some pressure resistance. A common application for the reinforced vinyl tubing is the in & out lines to your wort chiller.  This tubing is 5/8" inner diameter, is approved to 158°F, and can handle working pressures up to 200 PSI. Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 5/8" (15.9mm) Outer Diameter (OD): 0.89" (22.6mm) Working Pressure: 200 PSI Weight: 0.16 lbs/ft  

Read more less