Wine Bottling Equipment

An optional vacuum device for the Zeus Large Format Bottle Corker. This model has an adpater designed to work with Farro brand 3L Glass Wine Bottles. The bottle interface was specifically machined for the Farro 3L bottle so that the o-ring makes an airtight seal during the corking process. Creating a vacuum in the bottle prior to corking removes oxygen but also reduces pressure in the headspace which can potentially cause corking issues. This vacuum adapter requires the connection of an air compressor to create the vacuum. See here for the vacuum device with adapter for 5L still wine bottles and Champagne bottles.

Read more less

Safe and easy operation compared to handheld shrink guns Shrink capsules adhere quickly, simply slide the bottle into position then remove immediately Made from stainless steel for longevity and easy cleaning 800W power The safest and most simple solution to applying heat shrink capsules to your wine bottles. The horizontal heat shrinker allows you to keep your hands free and clear of the heating element during operation. Shrinking only takes a moment—simply slide the bottle into position and then quickly remove it. Stainless steel construction for easy cleaning. On/Off switch. 800 Watt / 110V.

Read more less

Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is lowered onto filling spout and locked into place with built-in bottle neck clasp. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir.  The clasps around each fill head will hold the bottles in place during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 15L reservoir.  

Read more less

Put one feed line into this filler from your fermenter or barrel and fill three bottles at once. Unit comes included with a Siphon Bulb for conveniently starting a siphon from the holding tank to each filler spout. Each bottle fills independently of one another to allow for staggered filling (take one bottle off as another is filling). Fill is initiated when bottle is placed onto filling spout and set down on the bottle tray. The flow of liquid will stop automatically when the level of liquid in the bottle reaches the liquid level in the reservoir.  The bottle will rest upon the bottle tray during filling. Spouts feature a unique design that eliminates dripping when bottle is removed. A float valve keeps the wine level constant in the wine reservoir at all times. Each spout fills about two bottles per minute. Built-in drain allows for easy cleaning. All metal parts are made from 304-type stainless steel. Replacement fill spout seals are available. 9L reservoir.   16.5" L x 16" W  x 21.25" H  Nozzle diameter: 12 mm (0.472441 inch)  

Read more less

Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5"H x 36"W x 18.5"D Reservoir is approximately 58 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5" H x 23" W x 18.5" D Reservoir is approximately 33 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D 110V Please note: The integrated pump is hardwired into the panel. It cannot be disconnected and used separately as it appears in the photo.

Read more less

Portable, benchtop gravity-style wine bottle filler Deluxe model with electronic level sensor and nitrogen injector valve Six filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 66L reservoir Fill up to 100 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Fill up to 100 cases of 750ml bottles per hour. The Deluxe model comes with an electronic level sensor that can be wired to a pump and a manual nitrogen injector valve mounted to the side. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 66L reservoir 110 pounds 42" H x 34" W x 20" D Please note: the example photo shows the 4-spout version of the bottle filler.

Read more less

Portable, benchtop gravity-style wine bottle filler Six filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 66L reservoir Fill up to 100 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features six filling heads and stainless steel construction. Fill up to 100 cases of 750ml bottles per hour. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. This unit is also available with Electronic Level Sensor and Nitrogen Injector (WE258). Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 980L per hour fill rate 66L reservoir 110 pounds 42" H x 34" W x 20" D Please note: the example photo shows the 4-spout version of the bottle filler. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

Portable, benchtop gravity-style wine bottle filler Deluxe model with electronic level sensor and nitrogen injector valve Four filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 45L reservoir Fill up to 65 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features four filling heads and stainless steel construction. Fill up to 65 cases of 750ml bottles per hour. The Deluxe model comes with an electronic level sensor that can be wired to a pump and a manual nitrogen injector valve mounted to the side. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 670L per hour fill rate 45L reservoir 84 pounds 42" H x 23" W x 20" D

Read more less

Portable, benchtop gravity-style wine bottle filler Four filling heads made from stainless steel are removable for easy cleaning All parts that come into contact with wine are made from stainless steel Level gauge located at the front of the 45L reservoir Fill up to 65 cases of 750ml bottles per hour Made in Italy by EnoItalia The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery or avid home winemaker. Features four filling heads and stainless steel construction. Fill up to 65 cases of 750ml bottles per hour. Compared to units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger, which speeds filling. The fill head is also easier to adjust for various bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. This unit is also available with Electronic Level Sensor and Nitrogen Injector (WE254). Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located at the front of the reservoir 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gas removal from the bottle for a faster fill rate 670L per hour fill rate 45L reservoir 84 pounds 42" H x 23" W x 20" D Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

Rolling cart plate filter for wine, beer, cider, and distilling Plates made of high temperature Noryl plastic capable of being steam sterilized Double filtration kit included as standard Built-in pressure gauges, sight glasses, and sample valves 1.5" tri-clamp inlet/outlet w/ butterfly valves (40) 40cm x 40cm plates 4,000L/h filtering capacity The BevBright commercial plate filter features external stainless steel piping with built-in pressure gauges, sight glasses, and sample valves. Easily connect hoses to the included 1.5" tri-clamp butterfly valves. Double filtration kit comes standard. Features: 304 Stainless Steel Construction Up to 4,000L (1,056 gal) flow rate per hour Rolling casters for easy movement Drip collection tray 40 plates included Double filtration kit included (2) Built-in pressure gauges, sight glasses, and sample valves 1.5" Tri-Clamp inlet and outlet 67.7" x 26" x  x 35.5" 518 lbs Pads should be placed in the machine rough-smooth-smooth-rough CE Compliant Please note: This unit comes with white plates rather than black plates as seen in the example photo. Updated images coming soon. Warning: You will need to remove the unit from the shipping pallet using a forklift and straps. Do not use a fork lift to directly lift from the bottom of the unit. Doing so may damage the bottom tray.

Read more less

Forced air for fast, consistent results Insulated handle with 3-position switch (off/cooling/use) 1,000W power The La Tecno ST1 Heat Shrink Gun features forced air to evenly apply heat across the surface of the capsule. Hot air is pushed downwards over the shrink capsule and results in more uniform shrinking, faster process, and consistent results. Traditional heat shrink guns with hot coils, but no internal fan for forced air, can cause the capsule to wrinkle as it shrinks. Chrome-plated body with insulated handle and three-position switch for off, cooling, and use. 1,000 Watt / 110V.

Read more less

Shaped to fit around a bottle neck to apply even heat from all sides Insulated handle and wire support stand to rest the shrinker between uses 700W power Simple, effective, and easy to use. This manual heat shrink gun uniformly applies heat from all sides to evenly shrink capsules to your wine bottle. Chrome plated steel body with insulated handle and fold out wire stand so you can safely set the shrinker down between uses. 700 Watt / 110V. Example photos show a European style plug. Updated images coming soon.

Read more less

Spring-loaded hand-lever for quick and easy operation Compatible with bottles from 7" to 14" in height Works with polylam, tin, and aluminum capsules Made in Italy by Marchisio Used to spin tin foils onto bottles, our Vertical Spinner features a guide for perfect bottle placement everytime, making it much faster and easier to use than a comparable Horizontal Spinner. Horizontal Spinners can be difficult to use because you have to center each bottle. The included hand-lever lowers the spinner onto the bottle and then springs back into place when released. The spinner height can be adjusted on the stand to accommodate bottles from 7" to 14" tall. 110 V.   Works with polylam, tin, and aluminum capsules from 28 - 31 mm Ø, up to 65 mm in length. Unit comes unwired for a 110v plug.

Read more less

An optional vacuum device for the Zeus Large Format Bottle Corker. This model has an adpater designed to work with Farro brand 5L Glass Wine Bottles. The bottle interface was specifically machined for the Farro 3L bottle so that the o-ring makes an airtight seal during the corking process. Creating a vacuum in the bottle prior to corking removes oxygen but also reduces pressure in the headspace which can potentially cause corking issues. This vacuum adapter requires the connection of an air compressor to create the vacuum. See here for the vacuum device with adapter for 3L still wine bottles and Champagne bottles.

Read more less

An optional vacuum device for the Zeus Large Format Bottle Corker. This model has an adpater designed to work with Farro brand Champagne Bottles from 750mL to 1.5L. The bottle interface was specifically machined for the Farro Champagne bottles so that the o-ring makes an airtight seal during the corking process. Creating a vacuum in the bottle prior to corking removes oxygen but also reduces pressure in the headspace which can potentially cause corking issues. This vacuum adapter requires the connection of an air compressor to create the vacuum. See here for the vacuum device with adapter for 3L still wine bottles and 5L still wine bottles.

Read more less

Small to large format bottle corker works for 375 mL up to 18 L bottles High-quality stainless steel construction throughout with heat-treated steel jaws 4 adjustable pivots to allow the use of corks with different heights and the use of champagne corks as well 6 adapters for different diameter bottle heads included Made in Italy by Ferrari The Zeus "Special 75" floor corker from Ferrari offers an exceptional range of bottle compatibility, accepting sizes ranging anywhere from 375ml to 18L. The adjustability of the Zeus is unmatched. Not only is it compatible with an extremely wide range of bottle sizes, it can be used with both standard and champagne style corks, and includes 6 adapters for different diameter bottle heads. If you're corking regular sized bottles and want the option to cork large format bottles as well, this is the corker for you!   Compatible Sizes: Champagne Bottles: 375 ml to 15 L Bordolesi Bottles: 375 ml to 18 L All Bottles: Height Max 75 cm, Diameter Max 22.5 cm Features: Suitable for any bottle with maximum height 75 cm and maximum ø 22.5 cm Suitable for any cork with maximum height 60 mm and maximum ø 42 mm Head with heat-treated steel jaws 4 adjustable pivots to allow the use of corks with different heights and the use of champagne corks as well The pins slide on spherical bearings A pedal lever grants an easy positioning of the bottle 6 adapters for different bottle heads: external diameter from ø 28 mm to ø 50 mm Can be completely disassembled for easy maintenance Rotating anti-skid feet, suitable for any surface Back wheels for extra mobility Handle grip for easy transport Weight: 97.5 lbs 61" H x 20.5" W x 22.5" D

Read more less

Welded legs and solid lever offer extra stability when corking wine bottles Much easier and faster to use than hand held or bench mounted models Also compatible with Belgian Corks Made in Italy by Ferrari This Italian Floor Corker gives you the leverage you need to easily compress and insert corks in your wine bottles. Much easier and faster to use than hand held or bench mounted models. Ships boxed and requires no assembly. Adjustable nut on plunger allows you to change the height of the cork in the bottle. Works well with our Belgian Corks, too! This unit comes with welded legs and solid lever. Also available in a model that can be broken down for easy storage (W540). Please Note: This corker is not suitable for use with synthetic corks, as the corker will crease the side of the cork during insertion which leads to a leak once the bottle is laid down for storage. See W408 if using synthetic corks. Min. Bottle Height: 9 in. Max. Bottle Height: 15 in. Min. Cork Size: 22x38mm Max. Cork Size: 30x45mm Height: 35.43" Length: 24.8" Width: 17.75" Weight: 17.6 lbs

Read more less