Wine Containers / Vessels

Replacement lock nut that comes with the Speidel plastic tanks.

Read more less

Using your existing Speidel lock ring and gasket this airlock cap screws right into the lid of your Speidel plastic fermenters. The grommet will fit standard 3-Piece or S-Shaped airlocks. The cap also provides a tighter seal because it is screwed into the cap where as the Speidel stopper only pushes into the lid.

Read more less

Replacement Lid with hole for all sizes of Fermonster Plastic Carboys. The lid was recently redesigned and reinforced to be stronger and prevent cracking issues reported by customers. The design was also updated to improve how the o-ring sits in the lid. Does not include o-ring.

Read more less

The large 6.5 gallon size of this carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. This carboy has a smooth neck which uses standard carboy fermentor hoods. Dimensions: Height: 22.75 inches Width: 12.5 inches Lead-free

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel. A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging. The 8 cm spigot is approximately 3-1/8" long. The shaft tapers from 9.5 mm (3/8") at the small end, up to 12 mm (15/32") wide.

Read more less

Upgrade your home winery with an innovative, Stainless Steel, Brew Bucket™ Fermenter!  You will enjoy many of the benefits of a stainless conical fermenter but at a fraction of the cost and you are going to love how easy it is to use!  Made by Ss Brewing Technologies from polished 304 Stainless Steel, the Brew Bucket™ is not only functional it is downright beautiful. At MoreWine!  we know winemaking equipment and we truly believe this is a piece of equipment you are going to enjoy using every season. While originally designed for Home Beermaking, the Brew Bucket has proven itself as a great addition to the home winery.  Stainless Steel construction means easy cleaning and long lasting durability, while a tightly clamped gasketed lid means no oxygen permeation and premature spoilage of your wine.  This is a great unit for small fermentations, test batches, and kit wines.  The entire lid lifts off, making additions or stirring of must hassle-free.  Cleaning is equally easy, as the stainless steel construction will resist tartaric buildup, and the wide opening allows for scrubbing if necessary. We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer.  The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking!   Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid.  The lid includes a removable, molded silicone gasket that ensures an airtight seal.  We love an airtight seal so that we can be sure to see the airlock working.  The welded on stainless handles make the BrewBucket super easy to move.  Overall: Very functional, easy-to-use, will last a lifetime, and looks amazing. Lets make some wine! Features: Certified Food Grade 304 Stainless Steel Construction Patent Pending Stainless Rotating Racking Valve 6.95 gal Max Capacity 40° Conical Bottom for Trub Trapping Nests for Storage, Stacks for Ferment! Molded Silicone Lid Gasket Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 21” Height x 13” Width 10 lbs Note: 1/2" Silicone fits into the lid hole for use as a blowoff.  3/8" ID tubing is perfect for racking beer from the BrewBucket's valve.

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind. These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 1.5 lbs Temperature Limit: 140° F Height: 14.6 inches Diameter: 9 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier. Please note: the pictured #10 Stopper (FE470VS) and three piece airlock (FE370) are not included.

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #0 spigot is approximately 5-1/2" long. The shaft tapers from 16 mm (11/16") at the small end, up to 24 mm (15/32") wide.      

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #3 spigot is approximately 8" long. The shaft tapers from 24 mm (15/16") at the small end, up to 32 mm (1-1/4") wide.      

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #2 spigot is approximately 7-5/64" long and 24 mm (61/64") at the small end.      

Read more less

This attachement can be used to replace the spigot or the airlock on your Speidel plastic fermenter and give you a 1/2 in. MPT to the outside and a 1/2 in. FPT on the inside. This allows you to attach a variety of components on the inside and outside of your fermenter. This coupling uses the standard speidel lock ring and gasket.

Read more less

These new 5L barrels are hand made from American White Oak and flamed to a medium toast. Great for ageing beer, wine and spirits. Comes standard with a spring-loaded spigot for easy dispensing. An optional stainless steel spigot is also available. Features: 5 L (1.32 gal) American White Oak Medium toast Raw Exterior (Non-Varnished) for easier leak prevention techniques Stainless Alloy Rings coated in a protective black coating Food grade reinforced plastic screw in cork Spring-loaded spigot for easier dispensing Barrel Wax Block Stand included KegLand Part Number: KL04657

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #1 spigot is approximately 6 5/16" long and 18 mm (23/32") at the small end.      

Read more less

Replacement lid gasket for 60L - 500L Speidel Rectangular Plastic Storage tank lids. Please note these replacement gaskets are for the newer generation tanks introduced in 2017. A redesign of the lid called for a different sized gasket. The new generation gaskets are 7-3/4" in diameter and 3/8" thick. The older generation gaskets are 7" in diameter, and 1/4" thick. For the Pre 2017 lid gasket please see FE736.

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden handle and spout, and a plastic valve insert. Spigots are sold individually, with no packaging.    The #4 spigot is approximately 8-3/4" long and 27 mm (1 1/16") at the small end.  

Read more less

Looking to add a thermowell to your Speidel plastic fermenter? This is the perfect way to do it. This thermowell replaces the airlock on top of your fermenter and uses the standard Speidel locking nut and gasket. The rubber grommet will fit standard 3/8 in. airlocks and the thermowell will accept most temperature probes. Please note that while using the stock spigot lock ring and gasket for the thermowell, you will have to use the solid locking cap where the spigot is normally located. In order to use the thermowell and spigot silmultaneously, you will need to purchase a second spigot or lock nut.

Read more less

Replacement under-lid gasket for stainless Fusti Tanks WE720 & WE72. Great to have on hand as a spare just in case. Made from food grade silicone. This gasket will not fit the Eurowelded 14 gallon Fusti Tank (WE730).

Read more less

Replacement spigots for the maintenance of your cherished wooden aging barrel.   A wooden barrel spigot is something that will need to be replaced from time to time. This wooden barrel spigot features a wooden spout and a plastic valve insert. Spigots are sold individually, with no packaging.    The #6 spigot is approximately 10-1/4" long and 34 mm (1-11/32") at the small end.      

Read more less

Stainless dip tube for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.

Read more less

The BrewBuilt Neoprene Carboy Sleeve works great for maintaining the internal temperature of your 5, 6, or 6.5 gallon glass carboy. Highly recommended for use with the BrewBuilt Carboy CoolStix. The added insulation will lower the amount of cycles needed to maintain fermentation temperatures and greatly assist in cold crashing. The sleeves are 6 mm thick with stitched piping on the edges for exceptional durability.   SKU Size Height (in.) Diameter (in.) FE329A 5 Gal 14.75 10.75 FE329B 6 Gal 17.25 10.90 FE329C 6.5 Gal 17.50 11.20  

Read more less

Carboys are great, but they have some issues: They require funnels to get liquid in, and cleaning brushes to clean up after. They hold a decent volume, but all are a bit undersized for fermentation, and have no inherent measuring system. Glass Carboys are breakable, while plastic carboys scratch with the first brush cleaning. The Fermonster leaves all these problems behind! These ported versions come with our plastic spigot (FE347), allowing for easy racking and sampling! These Fermonster Plastic Carboy Fermenters are made from heavy PET plastic, the same used in 2 L soda bottles, which is nearly impermeable to oxygen penetration. The huge 4" opening makes filling a breeze, and cleanup is as easy as wiping down the inside. Glass carboys are fragile, and this is nothing like that. The hefty plastic construction will hold up to brew day abuse. These fermentors are completely air-tight; the bodies constructed of heavy, oxygen impervious P.E.T. plastic, and the lids sealed tight with an O-Ring. Additional O-Rings and Lids both with and without holes are available for purchase, see our You Might Also Need items below. Features: 4" inner diameter wide mouth carboy - easy to clean! Food grade PET plastic construction is nearly impermeable to oxygen penetration No hard to clean dimples or ribs Punted bottom O-Ring and Lid with one hole is included (Fits #10 Stopper) Additional O-Rings and Lids available Weight: 0.6 lbs Temperature Limit: 140° F Height: 9.45 inches Diameter: 6.7 inches Completely taste and odor free Perfect for Beer, Wine, Cider, Mead, Kombucha or any other fermented beverage! Thick walls for better oxygen barrier.

Read more less

Upgrade your home brewery with an innovative, Stainless Steel, 3.5 Gallon Brew Bucket™ Fermenter!  Many have asked for a smaller BrewBucket, and that has been heard.  The Brew Bucket mini is perfect for 2.5 gallon batches.  With features similar to the original 7 gallon Brew Bucket, the Mini is a great way to do smaller batches.  Whether you are interested in splitting a 5 gallon batch for experimenting, or just brew 2.5 gallons, the BrewBucket Mini is a great choice. Featuring a conical bottom, 304 SS construction, a rotating racking arm valve, and stackable design, these are space saving feature rich fermentors that are easy and enjoyable to use.  We inspected and used the Brew Bucket™ and one of the most unique features that stood out is that the Brew Bucket can be stacked during fermentation, even with an airlock attached. We also like the conical bottom that allows trub to settle out in a concentrated space that minimizes the surface area of the trub that is in contact with your beer.  The included Patent Pending Rotating Racking Valve is also a brilliantly simple design allowing you to rotate the racking arm inside the Brew Bucket down during fermentation to minimize trub, and later up to get clear beer when racking!   Etched Volume Markers on the inside were super handy when filling. The build quality is really amazing for the price. Welds are clean. The lid is strong and the spring loaded lid hatches are solid.  The lid includes a removable, molded silicone gasket that ensures an airtight seal.  We love an airtight seal so that we can be sure to see the airlock working. The welded on stainless handles make the BrewBucket fermentor super easy to move. Features: 304 SS Food Grade Construction Rotating Racking Arm & Valve (Patent Pending) 3.5 Gal Max Capacity (2.5 gal Batches) 40° Conical Bottom for Trub Trapping Nests for Storage & Stacks for Ferment! SS lid w/ Silicone Gasketed seal Spring Loaded Lid Clamps for Airtight Lid Seal Offset Airlock Hole includes Silicone Stopper Gallon Markers inside for visual volume assessment Stainless construction resists damage and is easy to clean 8.5" Bottom Width / 11" Top Width x 16" Height   Please note: the thermowell pictured in the second photo is not included.  

Read more less

Made in Italy, these are premium glass carboys that are better than other carboys on the market because the glass has a more uniform thickness with less inclusions. Inclusions, or internal defects, occur when the glass is not cooled slowly over a longer period of time. This large 6.5 gallon size carboy fermenter is perfect for 5 gallon batches as there is plenty of head space to avoid blow-off during fermentation. This carboy has a smaller threaded neck than standard carboys, and requires a specific hood for use with racking, and fermenting. Our line of Itailan carboy is our top recommendation for glass carboys.    Specifications: Weight: 20.0 pounds each Dimensions: 21.0"h x 12.5"w x 12.5"d" Country of origin: Italy

Read more less

Stainless dip tube and thermowell for Speidel plastic fermenters. Replace your spigot with this dip tube along with a ball valve for a nice spigot upgrade. The 1/2 in. NPT connection can also be used for other attachments such as, quick disconnects, camlock components, or tri clamp. The dip tube uses the stock speidel spigot lock ring and gasket.

Read more less