Wine Making Hardware

Manifolds are a great way to have one CO2 tank supply multiple kegs. This manifold is made from aluminum, brass, and stainless. It also works up to 100 psi and includes 1/4 in ball valves with built in check valves. Another ball valve can be added to the end of the manifold for an additional gas line. Multiple manifolds can be linked up with a 1/4" nipple (D1820B). Features: 1/4" BSP ball valves 1/4" barbs Rated up to 100 psi Screw holes for easy mounting Optional additional port on the end   SKU Overall Length D1802 5-1/2 in. D1807 7-3/8 in. D1811 9-5/8 in. D1813 11-1/2 in. D1816 13-1/2 in. The above measurements are from the tip of the brass barb to the plug on the opposite end. Each manifold measures approximately 3.5" from the mounting holes to the tip of the valve. Kegland Part number: KL02554

Read more less

The Megamouth Torpedo Kegs are by far the easiest to clean and maintain out of any ball lock homebrew keg you'll find. With an extra-large lid opening, even the buffest of homebrewer (we hear they do exist!) will have no trouble reaching in for a good scrub when it kicks—no expensive keg washing contraptions needed! The Megamouth makes for an excellent pressurizable fermentation vessel and is the ideal choice for brewers who prefer to add dry hops and other flavoring ingredients directly to the keg. The brand new patented design, D794,899, of the Torpedo Keg gives you a high quality keg with features that a dedicated home brewer will appreciate. The machine welds on the Torpedo Keg exceed our standards for quality. There are no nooks and crannies for contaminant to get lodged in. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. These kegs can be stacked on top of each other with the Ball Lock quick disconnects still attached. They feature rolled stainless steel handles that are comfortable to grab. "In" and "Out" are etched near the keg posts for a quick and mistake-free set up when you are connecting lines in a refrigerator or kegerator. Considering the price and quality, the Torpedo Keg is an amazing value! Mouth opening is 5.8" L x 4.8" W. Dimensions:   Height (in.) Diameter (in.) 3 Gal 13.4 11.4 5 Gal 17.9 11.4 6 Gal 20.5 11.4 10 Gal 30.3 11.4  

Read more less

The Oxywand can be used during red wine fermentations to help promote yeast health while simultaneously reducing undesireable sulphur based compounds. The OxyWand™ comes with the 24" stainless wand with turned end, a .5 micron diffusion stone, and the nut / washer required to connect the two. The assembly is 26" long and will easily reach the bottom of glass carboys, dropped into stainless conicals, Speidel fermenters, etc.  To learn more read our MoreManual called Oxygen & Fermentation available on our website. For kit winemaking the Oxywand can also be used to degas wine by pumping in nitrogen to strip out excess CO2 left in solution.

Read more less

Replacement air tubes for variable capacity tanks. 90 cm tube fits LA Inox 800-1000 Liter tanks.   Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.

Read more less

Replacement gasket for the ForgeFit® 1.5" butterfly valve. We recommend replacing your butterfly gasket at least every 3 years. If you wait until you have a leak, your valve has already been unsanitary for some time.

Read more less

Due to high demand, the case of 100 is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Reusable, non-absorbent, white foam stoppers provide a snug fit, yet allow free airflow. Ideal for Erlenmeyer flasks when propogating yeast cultures.  Autoclavable up to 249°F (121°C) Fits 35-45mm inner diameter openings in graduated cylinders, tubes, and flasks Easily manipulated - springs back to original shape after use Resists alcohols, bases, esters, and dilute acids

Read more less

The most common relief valve. Fits most Cornelius and Firestone style kegs. Long body with spring with gray top and pull ring. Max. pressure rating: 100 psi Kegland Part Number: KL03070

Read more less

This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. This product is for the Black Beverage Out connection on the right, for the White Gas In connection, see our KEG734. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL03018

Read more less

This is a high quality plastic quick disconnect made by CM Becker for your beverage line. Barb is 1/4". 3/16" beverage tubing is recommended. Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".

Read more less

PVC tubing for gas and beer lines in kegging systems. 3/16 in inside diameter tubing with thick walls.  

Read more less

Stainless Nipple - 1/2" x 2" Threaded There is approximately a 1/2" of thread on both side of this fitting and a one inch section that is unthreaded.

Read more less

Simple Tee's that work great with 5/16" ID tubing. Made in the USA by Kent.

Read more less

Black, beverage out quick disconnect with male flare fitting made for Cornelius type kegs. 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available. Kegland Part Number: KL02974

Read more less

White, gas in quick disconnect with male flare fitting made for Cornelius type kegs. 1/4 inch male flare (MFL) threaded fittings make it easy to connect a variety of hardware pieces and connectors. MFL fittings are more versatile than barbed fitting, but they must be tightened down properly or they can leak. Barbed fittings are also available. Kegland Part Number: KL02967

Read more less

The construction of this reinforced silicone tubing enables silicone tubing to handle increased pressure applications. Braided silicone offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of this tubing allows excellent bend radii and permits installation in restricted spaces without impeding flow. 1/2" inner diameter, 3/4" outer diameter Open mesh polyester braiding incorporated within the wall of silicone tubing Made from FDA-sanctioned ingredients Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -40°F to 392°F (-40°C to 200°C) Odorless, tasteless, and inert Working Pressure: 72 psi Burst Pressure: 217 psi Platinum cured Conforms to FDA CFR 177.2600, NSF

Read more less

Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 7 which will block particles larger than 2.83mm or 2830 microns. This slightly larger mesh size makes this screen ideal for use in a distillation basket. KegLand Part Number: KL11921

Read more less

Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Please Note: the ball valve may be difficult to turn at first, but it will become less resistant after it is rotated back and forth a couple times.

Read more less

Stainless steel elbow with a 1/2" FPT inlet and 1/2" FPT outlet. Max pressure rating of 150 psi.

Read more less

Plastic 1/4" barb with 1/2" male thread. This is the same barb we use on our Beer and Wine Filter Kit (FIL40).

Read more less

For Cornelius style ball lock kegs with curved dip tube. Stainless Steel.

Read more less

Keep your kegs insulated with the new CoolBrew Keg Coolers. Specifically built for Cornelius kegs, these jackets will preserve your precious brew for longer when you take a keg out to share with friends. They come a little oversized to give you extra room for ice or ice packs. This one is perfectly sized for 5 gallon Cornelius kegs. Features: Made from durable polyester Comes with a shoulder strap for easy transport Insulation can keep kegs cold for hours Zipper on top provides easy access to tap and QDs 100% waterproof 26.5 in. Tall x 12 in. Diameter

Read more less

A highly flexible, environmentally friendly, beverage tubing that is BPA and PVC Free. Ultra Barrier™ Beverage tubing from EJ Beverage is an excellent alternative to PVC. It is constructed of a unique compound that is PVC Free and BPA Free; it contains no DEHP phthalates or other plasticizers. It does not emit dioxins and has extremely low extractables/leachables. This amazing tubing remains flexible at lower temps, has ultra-low permeability, and superior barrier properties. If you want a tubing that won't leach large amounts of chemicals, this is it. Temperature range of -40 to 125F Use this size for gas line applications. Also used for long draw beer lines over 25'. Technical Specifications: 5/16" line provides .40 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 5/16" line holds 1/2 of an ounce per foot. PVC Free. PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Proven to have no significant impact on taste or flavor Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 52 psi  

Read more less

Reinforced vinyl is food-grade approved up to 158F. Tubing has a max working pressure of 250 PSI. 5/8" ID, 7/8" OD  

Read more less

This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation.

Read more less