Whether you're a professional winery, or are making small batches in your kitchen, hardware parts will be necessary. We offer dozens of hardware parts, from hose clamps to butterfly valves. Any hardware you'll need to make great wine can be found in the categories below!
Wine Making Hardware
Shop By Collection
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 1.5"
Adapt any 3" tri-clamp port or valve to work with an existing 1.5" tri-clamp fitting. The concentric design limits flow resistance as you step down from 3" T.C to 1.5" T.C. Perfect for pairing with the BrewBuilt X3 Conical's 3" bottom port and attaching 1.5" tri-clamp fittings. 1.5" x 3" tri-clamp 7" tall Made from 304 stainless steel
$43.99
-
Anvil Ball Valve
Anvil Brewing Equipment ball valve is made from 304 stainless steel. This robust custom designed kettle drain valve has an integral bulkhead seal that forms an extremely rigid and leak-free joint. The convenient ½” NPT male fitting inside of the kettle allows mounting of nearly any accessory. Simple to install in any 7/8” hole and will never leak like other weldless connections! Easy to disassemble and clean. Add our dip tube for a complete draining system! When installed, the valve O-Ring will sit in the groove on the back of the valve, on the outside of the kettle.
$38.49
-
Stainless Barb - 1/2 in. x 1/2 in. Female BSP
Stainless steel barb fitting. 1/2" female BSP x 13mm barb (0.51"). KegLand Part Number: KL03612
$6.59
-
Stainless Plug - 1/4 in. BSPP
1/4" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06392
$2.79
-
Brass - 1/2 in. MPT x 1/4 in. FPT Bushing
Brass - 1/2'' MPT x 1/4" FPT Bushing
$2.99
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 65 cm Diameter
Replacement air tubes for variable capacity tanks. 65 cm tube fits Marchisio 300-400 Liter tanks, and the wide format 200L tank. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$49.99
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 100 cm Diameter
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Replacement air tubes for variable capacity tanks. 100 cm tube fits Marchisio 1000-2000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$54.99
-
Replacement Pressure Relief Spring - 30 PSI
This replacement spring is intended for use with our adjustable stainless steeel pressure relief valve - D1832L & D1833L. These units are adjustable from 0 to 30 psi. Example photo shown. The spring you receive may not match the photo exactly.
$5.49
-
Beer Tubing Assembly - Pin Lock Quick Disconnect (QD)
Includes Pin lock beverage out quick disconnect, line, hand held faucet and two hose clamps. 5 ft of 3/16" line.
$16.99
-
Torpedo Keg Sleeve (10 & 15 Gal)
Neoprene keg sleeves for the 10 & 15 gallon Torpedo Kegs. For standard or Slimline Torpedo kegs, see KEG650 or KEG651. 6mm thick.
$32.99
-
Gas Tubing Assembly - Ball Lock Quick Disconnect (QD) - 1/4 in.
Includes ball lock gas-in quick disconnect (barb), 5 ft of 1/4" ID tubing, and two hose clamps.
$14.99
-
Replacement PRV | Pull Ring Pressure Relief Valve | Yellow | 17 PSI
Replacement pressure relief valve rated to blow at 17 psi. This corny keg lid style PRV can be used with a range of products including kegs, FermZilla conicals, KegLand kegmenters, and KOMOS CO2 regulators. If you don't intend to ever exceed 17 PSI with the product you're using, installing the Yellow PRV will help ensure you don't over pressurize. NOTE: This is a safety device designed to release pressure at the approximate rated pressure. This is not intended to be used as a Spunding Valve. KegLand Part Number: KL22569
$7.69
-
Torpedo Keg | Ball Lock Keg | Stainless Steel Corny Keg | Low2 Keg Lid O-Ring | Superior Oxygen Barrier Properties | 10 Gallon
Super-sized corny keg, great for bigger batches and fermentation Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Look out below! The Torpedo Keg Depth Charge series just dropped and they're set to send blast waves through the homebrew world. Large-scale homebrewers will appreciate the ability to fit their entire batch into a single 10-gallon ball lock keg, and you can expect the same great features that have made Torpedo Kegs such a hit. Laser welded construction for superior quality, rolled stainless steel handles that will last a lifetime, and stackable design that won't interfere with your fittings. Quality First The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving, which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification, which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Total Capacity: 10.1 gal. Max Pressure: 130 psi PRV Rating: 85 psi Height: 18.5" Diameter: 16.05" Made from 304 Stainless Steel
$239.99
-
EVABarrier Double Wall Draft Tubing | Transparent Red | 5 mm ID x 8 mm OD
Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest Red is recommended for differentiating your gas lines, but the 5mm ID is the perfect size if longer 10-12 ft. beverage lines are needed Easily identify your gas and beverage lines with color-coded draft tubing. Transparent Red EVABarrier is recommended for gas lines while using LightShield Black for your bev lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. The semi-transparent red outer barrier makes the tubing easy to recognize even with minimal light. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. If you wish to use the tubing for beverage rather than gas, we recommend using 10-12 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line. With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized. EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable. This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 5 mm (13/64") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42741
$28.49
-
Replacement Seals for Female Camlock (Pack of 5)
Replacement seals for female camlocks. Compatible with Type B, C and D. Comes in pack of 5.
$4.39
-
JoinTech Quick Disconnect (QD) | Auto Shutoff | Dry Break | Female QD x 1/2" Barb
Prevents leaks and spills when disconnected, ideal for pressurized systems Handles both hot and sub-zero fluids, from hot transfers to sub-zero glycol mixtures (-40°F to 280°F) Made with high-strength, chemically resistant polyketone plastic body, 316 stainless steel spring, and EPDM O-ring for long-lasting performance JoinTech Connectors offer a premium quick-disconnect solution for high and low-temperature beverage handling. These fittings are suitable for a wide range of applications, from hot transfers to sub-zero glycol mixtures. The connectors feature an automatic shut-off valve that prevents flow when disconnected, making them ideal for hoses used with pumps or glycol systems. Features: Durable, UV-stable black design Automatic shut-off valve Vacuum rating of 60 psi Connections: JoinTech Female QD 13mm barb (0.51") Materials: Body: High-strength, chemically resistant polyketone plastic Spring: 316 stainless steel O-ring: EPDM Specifications: Operating pressure: Vacuum to 60 psi Temperature tolerance: -40°F to 280°F (-40°C to 138°C) Flow path: 3/8" KegLand Part Number: KL41102
$9.99
-
Stainless Tri-Clamp Ferrule | 2.5" T.C.
2.5" TC Ferrule is used to weld in a TC connection anywhere you need one! AiSI304 Stainless Steel.
$13.49
-
Gasket for 2in Butterfly Valve
Replacement interior gasket for the H661B 2" Butterfly Valve
$14.49
-
Stainless Tri-Clamp Reducer | 3" T.C. x 1.5" T.C.
Stainless steel Tri-Clamp reducer with 3" T.C. and 1.5" T.C. connections.
$32.99
-
White Valve Seat for 1.5 in. T.C. Sample Valve
Replacement valve seat for plunger-style 1.5" tri-clamp sample valve. Compatible with FF120.
$6.59
-
BrewBuilt® 1.5" Tri-Clamp Blowoff U Barb
The Blowoff U Barb eliminates tubing kinks by extending over the shoulder of a stainless conical fermenter and directing tubing straight downward. This gives you the advantage of a stainless steel blowoff cane, but is much easier to clean and sanitize. The 5/8" OD barb is perfect for forming a tight seal with 1/2" ID silicone tubing. Measures approximately 4" from T.C. to barb. 1.5" T.C. 5/8" OD barb Made from 304 stainless steel
$29.99
-
ForgeFit® Stainless Beer Thread Adapter | 5/8" Female Beer Thread x 1.5" T.C.
Convert standard 5/8" beer thread to 1.5" tri-clamp. Made from 304 stainless steel.
$16.49
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 12" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 12" long.
$28.99
-
Stainless Steel Camlock - Male Cam x 1.5 in. T.C.
Camlock to tri-clamp adapter. Perfect if you prefer camlock fittings on your tubing lines and own a brewing kettle, pump, or fermenter with tri-clamp fittings. Male camlock fitting x 1.5" tri-clamp. Made from 304 stainless steel. KegLand Part Number: KL20237
$14.49
-
ForgeFit® Stainless Tri-Clamp End Cap | 2.5"
End cap for 2.5" tri-clamp fittings. Made from 304 stainless steel.
$7.99
-
BrewBuilt® Stainless Butterfly Valve | 2" T.C.
The BrewBuilt Butterfly Valve has all the standard advantages you would expect from a butterfly valve in that they are the most sanitary valve, easy to clean and won't trap wort inside. It has a custom polished stainless steel handle which is designed to fit perfectly with the BrewBuilt X-series conical 2" T.C. bottom port.
$99.99
-
ForgeFit® Stainless Tri-Clamp Hose End | 1.5" Barb x 1.5" T.C.
This ForgeFit oversized barb hose end is intended for use with 1.5" professional beverage tubing. This is the same fitting we use on our pre-fabricated beverage hose assemblies. When designing this fitting, we made sure it has all the features we wanted in a barb intended for professional applications. The hose barb has a shoulder to keep the hose from creeping up towards the fitting end. The long barb promotes solid engagement with the hose and the end has a gentle internal taper to transition the product flow smoothly from the fitting to the tubing. 1.5" tri-clamp connection with 1.52" OD 3.49" long barb. Overall length 4.95". 3A certified 304 stainless.
$24.99
-
BrewBuilt® Whirlpool Return Fitting | 1.5" T.C.
The BrewBuilt Whirlpool Return Fitting allows you to recirculate wort in your boil kettle without sacrificing one of your tri-clamp ports. Install it in any tri-clamp kettle's thermometer port and attach your preferred valve to the side inlet. The front of the fitting can be capped off with a 1.5" T.C. end cap, or you can pair with the BrewBuilt Thermowell Offset to install a thermometer or temperature probe.
$64.99
-
BrewBuilt® Tri-Clamp Spunding Valve | 1 BAR | 0.3–14.5 PSI
The BrewBuilt T.C. spunding valve will give you the highest level of accuracy when fermenting under pressure. Designed for use with the BrewBuilt X-Series Uni Conical Fermenter, the spunding valve attaches to the lid's 1.5" tri-clamp port where the blow off fitting is normally installed. It can also be used with any pressurizable stainless steel conical with 1.5" T.C. top ports. The polycarbonate cylinder that surrounds the spunding valve can be filled with water or sanitizer to keep your tank 100% sanitary throughout the fermentation process. Adjustable from 0.3–14.5 psi, designed for the X3 Made from 304 stainless steel 11.75" H x 4" Ø For Your Safety: Never exceed the maximum rated working pressure of your vessel at any time during operation. The fixed-pressure PRV on your conical should always remain in place while using this spunding valve.
$199.99
-
Stainless Tri-Clamp | 3 Piece | 3" Clamp
This stainless steel tri-clamp features two hinges and folds into three pieces. Some brewers find this style of clamp easier to work with on large equipment that requires a 3" clamp. Direct replacement part to the clamp included with the FermZilla Tri-Conical fermenter. KegLand Part Number: KL25799
$14.49
-
FermZilla Stainless Tri-Clamp Reducing Elbow | 3" x 1.5"
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Stainless steel tri-clamp reducing elbow. Specifically manufactured as an alternative for the FermZilla 27L and 55L Tri-Conical bottom dump port. If you would like to bypass the 3" x 2" butterfly valve and collection container on your FermZilla Tri-Conical, you can use this reducing elbow to go directly to a 1.5" tri-clamp valve. KegLand Part Number: KL29469
$43.99
-
Stainless - 1/4" Ball Valve Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 1/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed. Here at MoreFlavor! we think this ball valve is actually easier to clean than 3-piece ball valves (such as our H602D).
$16.49
-
Stainless Nipple - 3/8"x1" Threaded (Close)
These are typically used for connecting Ball Valves to couplers welded into tanks. “Close” thread means there is no space between the opposing threads
$3.29
-
Stainless Coupler 3/8" FPT x 1/2" FPT
Stainless Reducing Coupler 3/8" FPT x 1/2" FPT
$5.49
-
Stainless Half Coupler - 3/8"
Half Coupler with 3/8" Female Pipe Thread. Half couplers have thread for insertion from one side only.
$3.99
-
Stainless Half Coupler - 1/2"
Half Coupler with 1/2" Female Pipe Thread. Half couplers have thread for insertion from one side only. 304 stainless. Weld into place. You will need to punch a 7/8" hole to install.
$5.49
-
Stainless Half Coupler 1"
Stainless Half Coupler with 1" Female Pipe Thread. Half couplers have thread for insertion from one side only.
$5.49
-
Compression Fitting - 12.7 mm to 1/2 in. BSP
These compression fittings are the most common type to be used with immersion chillers on the market today. We highly recommend using these fittings on any and all immersion / ice bucket chillers to optimize the ability to quicky disconnect the liquid hosing for storage and ease of cleaning. The industry standard fittings are Camlocks which can be found here. These fittings have a pressure rating of 4500psi. Instructions: Tighen the fitting up finger tight. Mark the female and male threaded pars with a texter or marker. Further this fitting 1 and 1/4 turns to ensure correct compression has been achieved. KegLand Part Number: KL02004
$9.89
-
Stainless Plug - 1/2 in. BSPP
1/2" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06408
$2.79
-
Stainless Lock Nut - 3/4 in. BSPP
Stainless Lock Nut. 3/4 in. Female BSPP. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06538
$3.29
-
Stainless Coupler - 1/2 in. BSPP x 3/8 in. BSPP
Stainless steel coupler or "reducing socket". 1/2" BSPP x 3/8" BSPP. Made from stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL10580
$3.89
-
Stainless Elbow - 1/2 in. Male BSP x 1/2 in. Female BSP
Male to female elbow. 1/2" BSP. Made from 304 grade stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06620
$5.49
-
Brass Nipple 1/2" Close
Male 1/2" NPT threads on both sides, no space between them
$3.99
-
Brass - 3/8" MPT x 1/2" Barb
Brass - 3/8" MPT x 1/2" Barb
$3.59
-
$3.29
-
Plastic Tubing Joiner | 3/8" x 3/8"
Temperature Range: Nylon: 32° to 140° F Acetal: -40° to 175° F Tubing: Nylon: Use with firm or soft (Durometer 45A-80A) polyurethane rubber or PVC plastic Acetal: Use with firm or soft (Durometer 40A-80A) polyurethane rubber or PVC plastic
$2.99
-
KOMOS® | Stainless Barb | 1/4 in. MPT x 5/16 in. Barb | 2-Pack
Stainless steel barb adapter for 1/4" femaile pipe thread connections. For use with 1/4" or 5/16" ID tubing. Pack of 2.
$7.69
-
KOMOS® | Stainless Steel Tee | 3/8 in. Barbs
This 3-way stainless steel tee is perfect for splitting gas lines to push multiple kegs with one CO2 cylinder. Slightly oversized at 10 mm OD (0.39") for a tighter fit with 3/8" ID tubing.
$5.49
You have seen 432 out of 534 products