Wine Pumps

When siphoning is impractical or too time consuming, the home winemaker needs a pump. We helped pioneer the use of diaphragm pumps as an economical, gentle method to move small volumes of wine. This new take on an old favorite includes speed control. Now you can dial in the flow from 0 to 3 gallons per minute. Gentle, economical, flexible, and wow are all adjectives we would use to describe the performance. When this pump was first introduced to us, we loved the idea, but had concerns that the speed control would compromise the longevity of the motor. We build much larger pumps (our ChunkyPumps for commercial wineries) and normally you need a $700 frequency drive to control motor speed. However, we kept in touch with the manufacturer and after three years in which he has not had any issues, and after our own testing, we are now sold that this pump performs as promised. The manufacturer offer a 1 year warranty. A diaphragm pump works by moving wine through one pulsating diaphragm into the next. In this design, as opposed to a centrifugal pump which has a small head spinning at high speeds, the shear value is small meaning the wine is not as "beat up". A diaphragm pump is self-priming, meaning that it will "pump air" creating suction that will pull liquid out of your container and into the pump head. This makes the pump very easy to use for the home winemaker. This pump comes with 1/2" barbed ports for easy connectivity.  Comes with 4' tubing on both sides. 110 Volts, 0.5 Amp, 60 Hz. Includes a built-in pre filter to help prevent solid materials from entering the pump head and potentially damaging the diaphragms, which would prevent the pump from being able to move liquid. The clear plastic top of the pre filter unscrews for cleaning.

Read more less

The ultimate pump for home winemaking use. Self-priming (will push air) so that it can draw out of a tank. Gentle diaphram action so as to not "beat up" the wine. Made of food-grade, NSF approved, materials polypropylene and santoprene, so no metallic interaction with wine. Pumps 3 gallons per minute. Flow can be restricted with an inline valve positioned on the outflow side. Self-regulating motor is designed to temporarily shut down, and then turn back on, when restriction pressure exceeds pump capacity. Has a heat limitation of 125 degrees Fahrenheit so cannot be used in brewing applications. Pump is equipped with 1/2" Male NPT posts on the inlet and outlet. Does not include the plastic barb fittings you will need to purchase separately. Please see the "You Might Also Need" section below for our recommendations regarding which fittings to attach to the pump. Please Note: The diaphragms in this pump are very sensitive to sediment and particulates and can be damaged if any solids are taken into the pump head. We recommend using an Inline Pre-Filter (FIL26) if you think there's a risk of sucking up solids with your inlet hose (pumping during pressing, for instance). Technical Specifications PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump CHECK VALVE: (1-Way Operation) Prevents Reverse Flow CAM: 3.0 Degree MOTOR: Permanent Magnet, P/N 11-195-01, Thermally Protected VOLTAGE: 115 VAC Nominal PRESSURE SWITCH: Factory Set @ 45 PSI Shut-Off, Turn On 25 5 PSI LIQUID TEMPERATURE: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max. PRIME: Self-Priming Up To 9.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar) PORTS: 1/2" - 14 Male Parallel Thread Materials: PLASTICS- Polypropylene VALVES- Santoprene DIAPHRAGM - Santoprene FASTENERS- Zinc Plated Steel NET WEIGHT: 5.3 Lbs (2.4 Kg) APPROVALS: UL, C-UL Listed, N.S.F. Listed

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in mid July.     Self-priming stainless steel impeller pump with for moving wine or beer Cast stainless pump head with 1.5" tri-clamp connections On/off switch for easy operation 11 gallons per minute reversible flow rate Made in Italy by EnoItalia Centrifugal pump with cast stainless head. 1.5" T.C. inlet and outlet.  Self-Priming. Reversible direction. Stainless impeller.  Best used for transferring wine or beer between tanks.   Specifications 11 GPM Max Pressure: 15.9 PSI (1.1 BAR) 1.5" Tri-clamp fittings Single Speed 1400RPM 194°F Max Temp Rating 14 LBS 12.6"x9.5"x7" 110V Note: Because this product is manufactured in Europe, it will come with a European plug. You will need to re-wire for use in the USA. Please see our European Equipment Wiring Colors guide for instructions on how to convert to a domestic plug.  

Read more less

Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it.  The 2 wheeled cart can make it into tight places in the winery, and scoots out of the way when not needed.  With the included SS Bypass, you can reduce flow rates up to 25%.  SS head and cart mean easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Although the Euro 30 is self-priming, the pump should never be run dry. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery SS Bypass for reducing flow SS head w/ flexible impeller Light assembly required - pump is separate from cart in box 220v bare cord  - You will need to wire on the appropriate 220v plug 

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025. Flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Pre-wired with 110V plug Made in Italy by EnoItalia This version of the Italian-made Euro 20 features a pre-wired 110V plug. Unlike the 220V model, this pump is ready for use and does not require a plug to be wired to a bare cord. The Euro 20 is a great pump for smaller production. Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice. We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 110V single phase Pre-Wired Plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller    

Read more less

Stainless steel pump with food-grade plastic impeller with for moving wine or beer 1.5" tri-clamp connections 13 gallons per minute flow rate Made in Italy by Marchisio This pump features a stainless body, housing, and bracket. It utilizes an impeller made from food-grade plastic. The impeller does not push air by itself so to prime it you unthread the priming nut on top of the filter housing and fill with water or wine. Comes with 1.5" T.C.  inlet and outlet. Has a .8 hp motor and moves 13 gallons per minute with no head. Will pump up to a height of 70'. 110v. Overall dimensions are 14.5" L x 7"W x 7"H. Weighs 15.4 lbs. Optional by-pass can be installed to restrict flow up to 25%.  This pump can handle some small solid particulate, such as grain particles, and is food grade up to 113° F. Please note the instruction manual references 230V for the voltage, but these pumps are custom configured by the manufacturer in 110V.  

Read more less

This stainless steel cart makes it easy to wheel around your pump and is small enough to fit into tight spaces. Comes with pre-drilled holes for mounting. Compatible with Euro 20 and Euro 30 flexible impeller pumps.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you as soon as it's available. The current estimated availability is Summer 2025. Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%.  SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 220v bare cord  - You will need to wire on the appropriate 220v plug  Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.    

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 14.4 g.p.m. (54.5 l.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.039 gallons (0.15 lit.) Maximum Particle Size .................... 3/32" dia. (2.4 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75.0 db(A) Dimensions .................................... 10" W x 10 7/8" H x 6 23/32" D

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 10.6 g.p.m. (40.1 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.022 gal (0.083 lit) Maximum Particle Size .................... 1/16" dia. (1.6 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 72.7 db(A) Dimensions .................................... 7 31/32" W x 9 5/16" H x 5 23/32" D

Read more less

The Straight Barb Fitting is an optional replacement to the Elbow Barb Fittings that come standard on the Super Transfer Pump (H308).

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 12 g.p.m. (45.4 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.039 gal (0.15 lit) Maximum Particle Size .................... 3/32" dia. (2.4 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 75 db(A) Dimensions .................................... 7 11/16" W x 11 21/32" H x 6 23/32" D

Read more less

Condition: Used - Good This unit is used. It shows wear from use but is in good condition and works perfectly. It may have cosmetic defects or show other signs of previous use.  It is still covered by our No Hassle Return Policy and 1 Year Warranty Policy.   The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor Food grade to 150 degrees Fahrenheit SS head w/ Flexible Impeller

Read more less

Connect these pumps up to an air compressor and you get a gentle transfer solution at a very reasonable price. Flow rates are variable by regulating the inlet air pressure at the compressor and/or by applying back pressure with a ball valve. We offer two styles of this pump, with either a polypropylene body or stainless steel body. Both models feature a Santoprene diaphragm. The Polypropylene pumps are available in 3/8", 1/2" and 1" Female Pipe Thread inlet / outlet; the Stainless Steel pumps are available in 1/2" and 1". Stainless Steel adapters to common barb sizes and to Tri-Clover style fittings are available. 1" models offer a Max Flow Rate of 53gpm and a Max Inlet Pressure of 120psi (8.3bar). Please see the specs below for information on this particular model. Manufactured by ARO. Smaller and larger sizes are available, please call 1-800-600-0033 or e-mail support@moreflavor.com for more information. Does not include air compressor or regulator Specifications: Maximum Air Inlet Pressure .............. 100 p.s.i.g. (6.9 bar) Maximum Material Inlet Pressure ....... 10 p.s.i.g. (0.69 bar) Maximum Outlet Pressure ................ 100 p.s.i.g. (6.9 bar) Air Consumption @ 40 p.s.i. .............. 1 c.f.m. / gallon (approx.) Maximum Flow Rate (flooded inlet) .... 10.6 g.p.m. (40.1 L.p.m.) Displacement / Cycle @100 p.s.i. ......... 0.022 gal (0.083 lit) Maximum Particle Size .................... 1/16" dia. (1.6 mm) Maximum Temperature Limits ........... 35 to 150 F (2 to 66 C) Noise Level @ 70 p.s.i., 60 c.p.m. ...... 72.7 db(A) Dimensions .................................... 7 31/32" W x 9 5/16" H x 5 23/32" D

Read more less

Combines all the benefits and advantages of our best-selling rubber impeller Enoitalia Euro Pumps with inline volume measurement.  This is a pump with a brain! Enter in the volume of wine you would like to pump and the EuroFill turns off when that volume has been pumped. With a built-in flow meter, PLC (programmable logic controller) and a touch screen this pump will reduce human error and make your cellar life a lot easier. Filling barrels, blending exact volumes of wine, and dosing larger tanks with specialized ingredients are a few of the most useful applications. You can also control pumping by time which can be useful for pump overs and cleaning solutions.   Includes a wireless remote control.  Made by Enoitala, a pump specialist, in Tuscany Italy.  Sold and supported in the USA by MoreWine!.  Unique Applications: Know the volume pump during any transfer Program an exact volume you want pumped Easily create perfect blends Fill barrels by volume (and then top off) Can be used for all general pumping application Features: Rubber impeller pump with electronic speed control Programmable Logic Controller (PLC) for manual or automatic operation Endress induction flow meter Programmable dosing, counting, and timer Remote control 7" Touchscreen Stainless steel control panel and trolley Dry run protection Pressure switch Specifications: Capacity: 0-6,340 GPH (0-24,000 L/h) Max Pressure: 33 PSI (2.3 BAR) 3" Tri-Clamp Inlet/Outlet 220V, Single Phase 4 kW Please note: the unit will arrive bare without a power cord, plug, or controls to power the motor on or off. You will need an electrician to wire the appropriate power cord and controls to the motor.

Read more less

Made to pair with the EnoItalia Lobe Rotor Pump, the optional receiving hopper can be used under a destemmer crusher to collect whole destemmed, or crushed grapes. Max capacity 50,700 lbs with destemmed grape, and 44,000 lbs with fermented grape. 220V 3 Phase 0.75 kW

Read more less

Self-priming wine pump with variable flow control from 0 to 20 gallons per minute Flexible rubber impeller gently pushes wine Stainless steel pump head with 1.5" tri-clamp connections Remote control operation with 40 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The perfect pump for moving wine from one vessel to the other.  These Flexible Impeller Pumps are controlled by a Variable Frequency Drive, allowing for wine or juice transfers as fast as 20 gallons per minute, down to a complete stop.  A sturdy Stainless Steel cart with nylon wheels allows for easy manueverability in the winery, and a lifetime of use.  The pump can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. We worked for a year to develop this particular pump with Enoitalia of Italy.  The value and price are really amazing. So much that we stopped making our own line of Chunky Pumps at the end of 2016.  Enoitalia has been making pumps for decades and while they are excellent at destemmer crushers and other equipment, pumps are their core specialty.  We will support the pump in the USA with common spare parts but we also have the backing and support of Enoitalia if anything was to go wrong. Although the Euro 30 is self-priming, the pump should never be run dry. Stainless steel head with flexible rubber impeller Remote control with 40' cord  included VFD allows for flow rate from 0 to 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input voltage required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery The pump is reversible and can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. Please Note: This pump will NOT come with fittings.   It will have 1.5" Tri Clamp ferrules, and the appropriate fittings can be chosen from YMANs below.

Read more less