Works great to pump cleaner through tubing. Does not hold pressure. Support at More Beer was great. They sent me a replacement but neither of them will work as a mini keg to transport beer. I pumped it to 10 psi and it loses 2 psi an hour at best. I really just wanted it for pumping PBW anyway.

This is a nice assembly of parts. I use one as intended as a Line Cleaner with a 1 liter bottle of StarSan. With the addition of a Red Carbonation Cap (DUO150) I have converted two of them into dispensing systems for 2 liter bottles of soda. They work great.

This is one of the most handy things I've bought. I use it to clean and sanitize my kegerator lines without CO2 (just open the tap connect the line to the device and pump it through) transfer lines and flush lines of any liquid for storage. You can even shoot PBW through transfer lines and let them sit for a half hour since pressure will be maintained in the line as long as you don't depress the QD. Such a great little tool highly recommend!

The carbonation tee makes this super easy to hook up to any standard soda bottle though the dip tube is a little difficult to attach (just heat the end in hot water though and it slides right on and _really_ stays put). It works great with a 1L bottle but use a bigger 2L bottle if you have a lot of cleaning to do. The little manual pump is a _great_ idea requiring no CO2 tank to power this puppy! I found it so convenient I'm now using it to push some sanitizer through everything when done for the day whether it needs it or not. :)

I do want a quick way to clean my party taps.

This is great for cleaning lines/tubing. Just fill a large plastic bottle with cleaner and pump it through (then turn bottle upside down to pump air through).

I needed an inexpensive cleaning product for my two-tap kegerator and this is the perfect solution. Using a one liter seltzer water bottle and a little beer line cleaner and my lines were cleaned out and ready for the next keg. I didn’t need anything too fancy for my setup but someone with a keezer might disagree with me.

I've had a line cleaner tool on my radar for a long time. I got tired of taking apart my entire liquid line/faucet after each keg to soak in line cleaner and then reassembling. I finally bought this and couldn't be happier. Huge time & work saver with this would buy again.

It's perfect. Just what I needed!

If you're looking for a easy way to clean/sanitize beer lines. Just get this works awesome with a 2 liter bottle filled with a cleaner or sanitizer.

I will never not have one of these as long as I own a keg. Simple and clever and useful to clean kegs without using lots of water or CO2. It is plastic so I'm not sure about its durability but at least it's cheap if I need to replace.

Low cost easy to use at home and at a party to quickly clean out my lines before coming back home. I was pleasantly surprised how good this was!

Works great period. When I switched to kegging I read a lot about beer line maintenance. Little did I know how it easy it would be with this. Glad I went for the cheap solution.

If you don't want to go with the expensive options out there this is a perfect solution. Save Co2 by not using a keg to clean the lines just pump with fingers. I've used this a few times on my lines so far and it's not a chore at all.

No cheaper way to get your beer lines clean. Cost is low and quality is great. I added another carb cap and have had a lot of fun setting up 2 liters as mini kegs! Works great for small batches of sparkling wine/cider and allows you to fill 2 liters and bring a draft setup to parties.

Worked great easy setup and priced right! Get the proper bottle for it. A spray bottle worked perfectly where as a water bottle was too flimsy.

As long as the pump holds up this is a great little set up. I wasn't getting much pressure by squeezing a 2L bottle to clean and sanitize kegerator lines. I have only used it for cleaning transfer hoses and the X1 Uni pressure pack float tube hose. But it works great! I over heated the included hose to make it go over the barb. So I had to put on a DUO100 and some EVA Barrier tubing.

Easy to use on a small plastic bottle with little effort to rinse clean and sterilize beer lines as complete assemblies with keg connectors and faucets attached. Also tackles the CO2/Liquid Fill Line used from the pressure fermenter to the keg. Just add a Carbonation and Line Cleaning Ball Lock Cap - Plastic to one end and the line is open for draining or cleaning.