Detecting your location...

BrewBuilt® SlingBlade Electric Heating Element (240V)

    Description

    The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze.

    The SlingBlade heating elements were designed to fit perfectly with BrewBuilt brewing kettles, but you may find them suitable for other kettles as well. They should be used with T.C. ferrules no longer than 1" in length. For dimensions and recommended minimum kettle diameter, please see the chart below.

    Features:

    • Made from Incoloy alloy with proprietary coating for long life
    • 1.5" Tri-Clamp connection
    • Unique offset design promotes rolling boil
    • Ultra-Low Watt Density eliminates scorching
    • UL Certified components

    Specs:

    • 240 Volt
    • L6-30 plug
    • Single Phase
    • 20 Amp breaker required for 10 & 15 gal element
    • 30 Amp breaker required for 22 & 31 gal element
      • 50-gallon kettle requires 2 x BE538 and 2 x 30 amp circuits

    SKU Kettle Vol. Wattage Length Radius Min. Kettle Ø
    BE535 10 gal 3750 13.25" 6.3" 13.75"
    BE536 15 gal 4500 16.75" 7.3" 15.75"
    BE537 22 gal 5000 17.25" 8.3" 17.75"
    BE538 31 gal 5750 19.5" 9.3" 19.75"

    Please note: Length is measured from the tip of the heating element to the T.C. connection. Radius is measured from the middle of the T.C. connection to the outermost edge of the element's curve.

    ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.***

     

    BrewBuilt® SlingBlade Electric Heating Element (240V)

      Product form

      SKU: BE535

      $109.99

        Free Shipping on orders over $79

        WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        You're getting the best possible deal on this item, thanks to our Minimum Advertised Price (MAP) policy.

        Description

        The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers, and the curved shape won't obstruct the flow of wort during whirlpool. Thanks to the non-circular design, the SlingBlade can easily be installed on any kettle with a 1.5" tri-clamp ferrule. This also makes removing the element for cleaning between uses a breeze.

        The SlingBlade heating elements were designed to fit perfectly with BrewBuilt brewing kettles, but you may find them suitable for other kettles as well. They should be used with T.C. ferrules no longer than 1" in length. For dimensions and recommended minimum kettle diameter, please see the chart below.

        Features:

        • Made from Incoloy alloy with proprietary coating for long life
        • 1.5" Tri-Clamp connection
        • Unique offset design promotes rolling boil
        • Ultra-Low Watt Density eliminates scorching
        • UL Certified components

        Specs:

        • 240 Volt
        • L6-30 plug
        • Single Phase
        • 20 Amp breaker required for 10 & 15 gal element
        • 30 Amp breaker required for 22 & 31 gal element
          • 50-gallon kettle requires 2 x BE538 and 2 x 30 amp circuits

        SKU Kettle Vol. Wattage Length Radius Min. Kettle Ø
        BE535 10 gal 3750 13.25" 6.3" 13.75"
        BE536 15 gal 4500 16.75" 7.3" 15.75"
        BE537 22 gal 5000 17.25" 8.3" 17.75"
        BE538 31 gal 5750 19.5" 9.3" 19.75"

        Please note: Length is measured from the tip of the heating element to the T.C. connection. Radius is measured from the middle of the T.C. connection to the outermost edge of the element's curve.

        ***In order to avoid injury or death we strongly recommend using a GFCI in any circuit used near water. You can find one here.***

         

        Recently viewed products

        Login

        Forgot your password?

        Don't have an account yet?
        Create account