This arm is easy to use too bad the 65L model doesn't have a pump that can whirlpool.

Solid accessory for the Brewzilla. I'd seen some online reviews claiming it didn't produce much if any whirlpool without mods but on my 35L without mods it seems to do fine.

Can finally do a good wirilpool

Takes a lot of the effort out of whirlpooling the wort when getting ready to cool it down with the therminator. This insures that your transfer temperature is stable for fermentation transfers.

Worked great. Also helped with the wort chiller in cooling down the wort

Great product. Now I can add my malt extract to my wort by myself & not worry about having to stir it while I pour it in.

Solid stainless steel. Good construction. And it did not work for the 65 l The device is too short and if you use pellet hops it cannot get enough swirl due to the screen at the bottom of the pot. Would probably work perfectly with leaf hops but I haven't tried leaf hops yet.

This works great for my ipa

Had planned to use this on the new Brewzilla gen 4 but they aren't shipping yet. However this fit my old Klarstien all in one almost perfectly. Same coupler size and worked just fine.

Beautifully made product that works well. I just wish the Brewzilla pump had a little more oomph to get the whirlpool going. I gently stirred the hot wort with a brew spoon to get it spinning then I used the whirlpool arm to keep it going long enough to form a good trub mound.

It stirs but whirlpool is a bit of an exaggeration.

Works good could be stronger.

The way i brew any more this is not really needed.

This creates a nice whirlpool to help keep a constant temp. I really like this when cooling so I don't have to stir around the wort cooler. The only issue I had was the pump got blocked by sediment during the boil so i was not able to use this. When i cleaned the brewzilla the pump worked fine.

This should have been part of the whole pkg deal

I only really use this while using my wort chiller to cool the wort. This arm doesn't really seem to provide a good whirlpool but it does reduce the time to cool fairly good.

Really great addition to the Brewzilla. Can't recommend it enough.

I have the Anvil Foundry system and even though this is made for the Brewzilla it works great for me. Clearest beer I’ve brewed with this system yet and it is soooo much easier to let the pump whirlpool the beer instead of manually whirlpooling with a spoon. Simply buy the whirlpool arm and a pair of cam lock fittings and in a matter of seconds your brewing life will be changed for the better.

Very good price for the attachment. Gave it 4 stars because I wish it didn’t extend so far down into the unit. I made an extension for it so it higher in the unit. Seems to whirlpool much better. Overall very satisfied. Really good construction

Worth the price and keeps the wort circulating well

This shortened my cooling time dramatically.

Works perfect. Great addition. Lowered my chilling time by at least half...

The depth is perfect but because this as this is going into a round vessel the output of the tube needs to be curved as is it shoots into the side and doesn't create a strong vortex. I put a slight twist so that the output end is more parallel with the sidewall and got a much better whirlpool.

I purchased it because I already use the same type of quick disconnect on all of my equipment. I just clamp it to the side of my SS Brewtec kettle and whirlpool 20 min and it create a nice sediment cone and helps me transfer clearer beer! I could not make one for this price. Great value!

Doesn't look like it's doing much when you flip the switch but trust it - it works great in the 35L Robobrew.

I love it and I love morebeer

This worked really well. Just like the recirculating arm becareful not to touch it. It is very hot.

Collected all my hops in the center just like advertised

Works well for the intended use. I found it works even better when used to pump the wort through my cold plate chiller and into the fermenter. With some silicone tubing and an inline thermometer it's a great transfer device.

any help to make better beer and less work with good results works for me

I had tried doing a whirlpool by clamping a section of hose attached to the standard arm to the side of the tank but it really didn't work. This does! With cooling coil in place this created a very nice whirlpool around it aiding cooling and concentrating trub in center. Well worth the cost!

This whirlpool arm is super simple and works like it's supposed to. Better than any other recirc driven whirlpool and cheaper too. Easy to use easy to clean does it's job.

it works great for that end of boil whirlpool as well as to circulate the wort while you are cooling - as long as you system is free of hops and other gunk which can easily clock the Brewzilla pump (use of hop strainer is recommended)