Detecting your location...
Beer Making

March 815-PL High Temperature Brewing Pump - High Flow

    Description

    The History of March and Homebrew
    Many years ago we worked with March Pumps to release what is now the standard pump in the homebrewing community, their model 809 (our H315) with a polysulfone head and 6' cord with plug. Thousands and thousands of these pumps have been sold to homebrewers.

    The New Design
    Now, with a slight design modification, the new model nearly eliminates past cavitation issues (where the impeller spins in an air pocket and no liquid moves). We've been testing/using the pump with our BrewSculptures for several years now and are extremely happy with the results, so much so that we are completely replacing the H315 with the high flow model.

    Still Works the Same
    The new model comes with all the great features of the original - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade materials in contact with the liquid, 1/2" ports, etc. - but now features a different slightly higher flow rate with less issues of cavitation.

    The magnetic drive in a March pump acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump below the level of the liquid source. This pump cannot be run dry.

    Features List

    Addtional Notes To restrict flow place a ball valve on the out flow of this pump.
    This is the pump we install and use on all of our BrewSculpture brewing systems
    We stock polysulfone replacement heads, H317, in case the threads are damaged. If you are looking for a pump for a larger home brewery or small nano brewery you can also look at our H325 Nano Brewery pump from March.

    • Included bracket for mounting
    • 6' power cord with plug wired in for easy use
    • 115V - 50/60Hz
    • Maximum flow of just over 7 gpm (at zero head)
    • Maximum head of 18 feet (at zero flow)
    • 1/2" mpt fittings on both inlet and outlet.
    • Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon
    • 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor
    • Motor is fan cooled
    • Will handle internal pressures to 50 psi.
    • Max temp rating: 250F
    • Face unscrews and rotates at 90 degree intervals to adjust to your application.

    Note: When using silicone tubing, we recommending using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!

    March 815-PL High Temperature Brewing Pump - High Flow

      Product form

      SKU: H315HF

      $275.99

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        The History of March and Homebrew
        Many years ago we worked with March Pumps to release what is now the standard pump in the homebrewing community, their model 809 (our H315) with a polysulfone head and 6' cord with plug. Thousands and thousands of these pumps have been sold to homebrewers.

        The New Design
        Now, with a slight design modification, the new model nearly eliminates past cavitation issues (where the impeller spins in an air pocket and no liquid moves). We've been testing/using the pump with our BrewSculptures for several years now and are extremely happy with the results, so much so that we are completely replacing the H315 with the high flow model.

        Still Works the Same
        The new model comes with all the great features of the original - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade materials in contact with the liquid, 1/2" ports, etc. - but now features a different slightly higher flow rate with less issues of cavitation.

        The magnetic drive in a March pump acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump below the level of the liquid source. This pump cannot be run dry.

        Features List

        Addtional Notes To restrict flow place a ball valve on the out flow of this pump.
        This is the pump we install and use on all of our BrewSculpture brewing systems
        We stock polysulfone replacement heads, H317, in case the threads are damaged. If you are looking for a pump for a larger home brewery or small nano brewery you can also look at our H325 Nano Brewery pump from March.

        • Included bracket for mounting
        • 6' power cord with plug wired in for easy use
        • 115V - 50/60Hz
        • Maximum flow of just over 7 gpm (at zero head)
        • Maximum head of 18 feet (at zero flow)
        • 1/2" mpt fittings on both inlet and outlet.
        • Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon
        • 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor
        • Motor is fan cooled
        • Will handle internal pressures to 50 psi.
        • Max temp rating: 250F
        • Face unscrews and rotates at 90 degree intervals to adjust to your application.

        Note: When using silicone tubing, we recommending using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!

        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 6.0 lb

        You Might Also Need

        MPT Stainless Steel Male Quick Disconnect (QD)
        MPT Stainless Steel Male Quick Disconnect (QD)
        $13.49
        Replacement O-Ring For March and Chugger Pumps
        Replacement O-Ring For March and Chugger Pumps
        $5.99
        Female Stainless Steel Quick Disconnect (QD) w/Barb
        Female Stainless Steel Quick Disconnect (QD) w/Barb
        $18.99
        Polysulfone March Pump Wet-End Assembly
        Polysulfone March Pump Wet-End Assembly
        $187.99
        Pump Mounting Bracket - Stainless
        Pump Mounting Bracket - Stainless
        $32.99
        Stainless Ball Valve - 1/2
        Stainless Ball Valve - 1/2" Full Port
        $17.99
        Stainless - 1/2 in. MPT x 3/8 in. Barb (1/4 in. ID)
        Stainless - 1/2 in. MPT x 3/8 in. Barb (1/4 in. ID)
        $6.59
        Stainless - 1/2 in. FPT x 1/2 in. Barb
        Stainless - 1/2 in. FPT x 1/2 in. Barb
        $6.59
        Stainless - Full Coupler - 1/2 in.
        Stainless - Full Coupler - 1/2 in.
        $4.39
        Plumbers Tape
        Plumbers Tape
        $2.49
        Stainless - 1/2 in. MPT x 5/8 in. Barb (1/2 in. ID)
        Stainless - 1/2 in. MPT x 5/8 in. Barb (1/2 in. ID)
        $7.19
        Female Stainless Steel Quick Disconnect (QD) w/ FPT
        Female Stainless Steel Quick Disconnect (QD) w/ FPT
        $18.99

        Recently viewed products

        © 2026 MoreWine

          • American Express
          • Apple Pay
          • Bancontact
          • Diners Club
          • Discover
          • Google Pay
          • iDEAL Wero
          • Mastercard
          • Shop Pay
          • USDC
          • Visa

          Login

          Forgot your password?

          Don't have an account yet?
          Create account