Table Top Corker
Table Top Corker
SKU: W408
$79.99
SKU: W408
$79.99
Best thing I’ve spent money on recently Highly recommended for anyone that bottles their hard work.
If you're thinking about buying this go ahead and do it. Simple easy and effortless. I had no problem putting number nines and all my bottles with this. Try that with a lever or a hand corker; impossible. Please remember to adjust the depth of the plunger so that the cork is flush. My first one pushed the cork way too low and had to pull it out waste of one cork. Simple oversight. It comes shipped to you in two pieces flip it over. Take out the screw & washer put the legs on put the washer on insert and tighten the screw. Your set up is complete.
The picture doesn't do justice to this thing. It is larger than I expected and very solid and well made. It will last a lifetime.
Excellent construction height fine if you are short or place on a low table/bench
I like it very much and would recommend it to anybody that is bottling lots of wine. Also very easy to use and very solid and durable. It will probably last me for ever.
Best thing I’ve spent money on recently Highly recommended for anyone that bottles their hard work.
If you're thinking about buying this go ahead and do it. Simple easy and effortless. I had no problem putting number nines and all my bottles with this. Try that with a lever or a hand corker; impossible. Please remember to adjust the depth of the plunger so that the cork is flush. My first one pushed the cork way too low and had to pull it out waste of one cork. Simple oversight. It comes shipped to you in two pieces flip it over. Take out the screw & washer put the legs on put the washer on insert and tighten the screw. Your set up is complete.
The picture doesn't do justice to this thing. It is larger than I expected and very solid and well made. It will last a lifetime.
Excellent construction height fine if you are short or place on a low table/bench
I like it very much and would recommend it to anybody that is bottling lots of wine. Also very easy to use and very solid and durable. It will probably last me for ever.
Perfect for bottling Belgian bottles. Works with 375ml bottles too with some padding at the base like a rubber stopper.
Very reliable corking unit. Have been able to use all types of corks and bottles without any difficulty. A good value for the money.
great product easy to use but not for the uninformed.
The product delivered as promised. I am very satisfied.
Works great. Very easy to use
Bought this because I was tired of using the double lever corker and I couldn't be happier. Super easy one handed operation let me zip through a case of wine bottles nearly as fast as I could switch them out. Buy one. You won't be sorry.
I would call it a floor corker myself as it still requires a nice bit of pressure easier applied from a standing to floor arrangement. But I love it! It is consistent and never damages the corks like my 2 hander did.
Easy to use with all bottle sizes. Perfect for our small boutique vineyard.
Fantastic tool to finish your bottling!
This corker replaced my hand held - makes corking bottles a snap.
I found the corker very easy to assemble and setup. Corking was very straight forward. I corked 24 bottles in 1.5 hours with ease.
Easy to use and works well with synthetic corks.
Very good for a floor corker. A little large for a table top Corker. My only concern are the plastic teeth that compress the court for insertion into the bottle. it will be interesting to see how they hold up over time.
This corker works slightly better than its older sibling I bought 14 years ago. The design must be tweaked slightly for the better. But neither of them are best used on a table top--although to be truthful I haven't even attempted it. It is obvious to me as better used as a floor standing device.
Works well for recording wine bottles. Our female servers are able to use it.
for a small corker is great to use
Can this be broken down for storage when not in use?
how does it work?
It works just like its floor model bigger brother. The bottle bottom goes on the round spring loaded disk. Press down and slip the bottle neck into the top part. Place a cork in the hole in the top. Pull the lever down. As the handle is pulled down the cork is squeezed smaller in diameter. The handle then pushes the cork into the bottle. The part that compresses the cork is made of plastic not metal like the bigger unit. This will work on a table or the floor. It is easier to store than the bigger floor only model. This unit can handle the bigger diameter corks used when storing wine beyond a year. The hand corker cannot do this.
It works great. I have been very pleased with it. It is called a table top corker but I use it as a floor corker.
Stick the cork into the top put the bottle on the bottom plate make sure it's in the groove under the cork mechanism and push down on the handle. There is an adjusting nut to get the proper insertion. Make shure your corks are dry and clean as it rusts Better if on the floor or a low platform.
Great so far have corked about 20 cases so far
Will this handle T corks?
This unit will not handle T corks. This is designed to squeeze the corks before inserting them into the bottles so it can be used only with standard corks that are compressed and inserted entirely into the bottles.
Is there a beer bottle capper attachment that works with this corker?
Not to my knowledge but then I've never actively searched for one..
Bottle cappers are totally different systems
Not for that model
Not that I know of
Not that I'm aware of and based on how this machine operates I'm not sure how such an adapter would function.
Is there sufficient adjustment to handle smaller 375 and 500 ml bottles?
works great on 375 mm bottles that were designed to use a cork. 500 ml bottles are designed to use a crown cap unless you can find some that are designed to use a cork
I can only verify that this high quality tool does the 750ml and 1.5l bottles very well. You don't even have to adjust the bottle shelf between sizes it adjusts the height automatically. My only minor knock would be that the cork seating punch stop ring should include a lock nut or ring above it so that you don't lose the setting over time as you cork multiple bottles. Overall a very nice corker. I have only five years of wine making experience but I read all the reviews and skipped all the hand and table top corkers and went straight to this one. Zero regrets. One tip: Bottle shapes and dimensions vary across manufacturers. With this tool I'd suggest you bottle your wine by bottle style/size group. Once you determine that depth by a bit of trial and error initially you set the stop ring to the depth you determined and you'll get very consistent cork set depth each time per bottle brand/style.
Yes.
Only use 750ml bottles.
Yes It has spring that’s adjustable
Yes it handles any size bottle automatically due to the spring loaded bottle support.