Search results for "co2 adapter pressure gauge"

Unique Core Puncturing / Actuator results in zero gas lost from screwing in CO2 cartridges Interchangeable ball lock disconnect orientations. 45° for plastic QDs or 90° for stainless QDs 6.5mm Duotight compatible hose barb Swappable mini pressure gauge remains well protected within solid cast brass regulator body Corny-style 65psi Green PRV for added safety and manual depressurizing Switch from 16g to 74g CO2 cartridges with an adapter fitting The new Core 360 Mini CO2 Regulator from KegLand represents a huge jump forward in the mini regulator market. After much feedback on how to make mini regulators more compact, sturdy and efficient, the brilliant engineers at KegLand have come up with this mini-beast. The analog gauge is removable and can be swapped out with a gauge of a different pressure range or it can be swapped out for the Digital Mini Pressure Gauge. Heavy Duty Construction Starting with the body of the regulator, this unit is made from chrome-plated solid cast brass which means it will stand up to quite a bit of abuse. Unlike most mini regulators, the pressure gauge on the Core 360 is safely recessed in the regulator body, so if you ever drop it there is little chance that you'll damage the gauge. What's more, the gauge is removable, so you can swap it out with another mini gauge with a pressure range that better suits your application. Unique Cartridge Connection What really sets this unit apart from other mini regulators is the way in which you insert a CO2 cartridge. A common complaint with these types of regulators is that you can lose a lot of gas from the cartridge just from threading it into the regulator. There's that brief period where the cartridge has been punctured but you haven't fully threaded it into the regulator to form a seal. If you're not quick enough, this can result in a significant amount of lost gas. The Core 360 has a unique design feature where inserting the cartridge is a 2-step process. First you fully thread in the cartridge so it forms a seal before it's opened, and then you screw down the actuator pin to release gas into the regulator. Simple and effective. Furthermore, the Core 360 Mini Regulator is designed to be compatible with both 16g and 74g cartridges. Out of the box it will be ready to accept 16-gram 3/8"-24 UNF threaded cartridges. But with a simple adapter you can switch to 74-gram 5/8"-18 UNF threaded cartridges. Interchangeable Gas Outlet Another feature we haven't seen before on a mini regulator is the interchangeable gas outlet. You can use the swivel nut connection to directly attach the regulator to a flare ball lock disconnect, or you can swap to the 6.5mm Duotight-compatible barb and connect draft tubing. This is a great option if you want to dispense a commercial keg without the need of a ball lock to sanke coupler adapter. The regulator also has two outlet options at either a 45° or 90° angle which makes this the ideal mini regulator regardless of whether you use plastic or stainless steel ball lock disconnects. SodaStream Compatible If you remove the 16g cartridge bushing, you'll find TR21-4 female threads for use with SodaStream gas cylinders. These can be a great option for mobile dispensing as they provide much more gas than a CO2 cartridge and are more easily transported than a full CO2 tank. Includes: KegLand Core 360 Mini Regulator 6.5mm Duotight-compatible hose barb Female Flare Fitting for MFL Disconnects Port end cap 65psi Green PRV SodaStream to 16g thread bushing KegLand Part Number: KL20404 Warning: Do not overtighten onto your cylinder. It is recommended that you use a spanner to hold the neck of your SodaStream cylinder while attaching and detaching the Mini 360 Core Actuator Regulator. Mini 360 Core Actuator Regulator | User Guide

Read more less

Replacement low pressure gauge for CO2 or Nitrogen regulator - used to determine how much pressure you're allowing out of the regulator. RHT

Read more less

3000psi gauge tells tank pressure. Left hand thread replacement gauge for some brand regulators.

Read more less

Replacement CO2 regulator 60 psi gauge for setting dispense pressure. RHT

Read more less

3000psi gauge tells tank pressure. Right hand thread replacement gauge for most brands of regulators.

Read more less

KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor. This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analog gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle. This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue. With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Compatible With: BlowTie 2 Spunding Valve Duotight In-Line Regulator w/ Gauge Core 360 Mini CO2 Regulator Specifications: Backlight Illumination: Hold yellow button for 3-5 seconds Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Radial O-ring Stem: 7.8mm Bore Please note: This gauge is not suitable for measuring pressure of liquids. It is only for measuring gas pressure. If liquid gets into the pressure transducer it will damage the gauge. For analog pressure gauges that are compatible with liquid, see below: Mini Gauge 0-15psi Mini Gauge 0-30psi Mini Gauge 0-60psi Mini Gauge 0-150psi KegLand Part Number: KL1838

Read more less

The most high-quality KOMOS regulator, featuring an integrated nut-hand-wheel that allows for effortless, one-handed tightening to your CO2 cylinder Internal components are accessible from the backplate for easy cleaning and servicing Includes a Duotight adapter for EVABarrier tubing and a 1/4" flare fitting with barb, allowing for quick and adaptable gas line setups The PRV is rated to 65 psi and can be swapped out with 17-psi, 35-psi, or 100-psi rated PRVs if desired Rubber gauge protectors safeguard gauges from potential damage Compatible with standard US CO2 tanks The robust body and precision diaphragm provide high flow rates, and the pressure can be easily and precisely adjusted with the hand dial. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa. The PRV is rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread gas-out with included 1/4" barb and nut. Easily swap out the barb to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included). Each KOMOS regulator includes a Duotight Adapter, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs. Features: One-handed Cylinder Tightening: Attach the regulator to your CO2 cylinder effortlessly with one hand using the integrated nut-hand-wheel. No separate spanner or wrench is needed! This is made possible by a new spigot seal design that compresses easily without the risk of damage or leaks. Simplified Self-Servicing: Maintain your regulator with ease by accessing the internal components from the backplate. Simply use an 8mm hex/Allen key to remove the regulator knob and access the internals for cleaning, eliminating the need for a vise or specialized tools. Flared Output: The regulator features an output with 1/4" male flare connection. Each regulator comes with a 1/4" barb and nut as well as an 8mm Duotight adapter for use with your preferred tubing. Triple-Scale Gauge: Monitor your CO2 pressure accurately with the Class 2.5 gauge, featuring PSI, bar, and kPa scales for easy reading (+/- 2.5% accuracy). Durable Seat Cap Assembly: The new seat cap is constructed from ultra-high molecular weight polyethylene, providing exceptional resistance to wear and tear. This robust design minimizes the risk of scratching and brass filings, which can lead to pressure creep, even under demanding conditions like forced carbonation. Reinforced Steel Gauges: Benefit from enhanced durability with thicker steel gauges built to withstand rigorous use. Color-Coded PRV: This regulator includes a 65 PSI green PRV (pressure relief valve).  This can be swapped to the Red (35 PSI) or Gray (100 PSI) PRV if desired. Easy Mounting: Integrated M6 mounting holes allow for secure and convenient installation. Note that the nut-wheel needs to be removed for flush mounting. Specs: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI 1/4" & 5/16" barb fittings included Duotight adapter for EVABarrier tubing included Standard US CO2 Threads (CGA320) Gauge protectors M6 mounting screw holes Made in accordance with AS 4267

Read more less

Handles both dispensing and rapid burst carbonation, ideal for seltzers and high-carbonation drinks requiring 30-40 psi Includes both Duotight and barb fittings for use with EVABarrier tubing or standard gas tubing Features a shutoff valve for safe operation and standard US CO2 tank threads (CGA320) Rubber gauge protectors safeguard gauges from potential damage Compatible with standard US CO2 tanks The KOMOS Dual Gauge Precision Universal Regulator is suitable for both dispensing and carbonating beverages. Compared to the Precision Dispensing model, the Universal model features a wider 0-50 psi operating range, enabling pressures above 25 psi for rapid burst carbonation. This is particularly useful for seltzer and other highly carbonated drinks requiring 30-40 psi dispensing pressure. The regulator includes both Duotight and barb fittings for compatibility with EVABarrier draft tubing and standard gas tubing. The gas outlet features a shutoff valve for safe and convenient operation. Rubber gauge protectors are also included to safeguard the gauges from potential damage. Features: 0-50 PSI operating range Low pressure gauge reads from 0-60 psi Pull ring PRV rated to blow off at 50 psi Narrow pressure range for increased precision 1/4" & 5/16" barb fittings included Duotight adapter for EVABarrier tubing included Standard US CO2 Threads (CGA320) Shutoff valve Gauge protectors Ideal for dispensing or carbonating beverages

Read more less

Narrow 0-25 psi operating range allows for fine-tuning and accurate dispensing of carbonated beverages Includes both Duotight and barb fittings for use with EVABarrier tubing or standard gas tubing Features a shutoff valve for safe operation and standard US CO2 tank threads (CGA320) Rubber gauge protectors safeguard gauges from potential damage Compatible with standard US CO2 tanks The KOMOS Dual Gauge Precision Dispensing Regulator provides precise control for dispensing carbonated beverages. Its narrow 0-25 psi operating range allows for finer pressure adjustments and greater accuracy compared to regulators with wider ranges. This design enables operators to easily fine-tune the output pressure within typical draft dispensing pressure settings. The regulator includes both Duotight and barb fittings for compatibility with EVABarrier draft tubing and standard gas tubing. The gas outlet features a shutoff valve for safe and convenient operation. Rubber gauge protectors are also included to safeguard the gauges from potential damage. Features: 0-25 PSI operating range Low pressure gauge reads from 0-30 psi Pull ring PRV rated to blow off at 25 psi Narrow pressure range for increased precision 1/4" & 5/16" barb fittings included Duotight adapter for EVABarrier tubing included Standard US CO2 Threads (CGA320) Shutoff valve Gauge protectors Ideal for dispensing carbonated beverages

Read more less

Easily carbonate or dispense beverages at different pressures with the KOMOS Dual Body CO2 Regulator Wide 0-60 PSI operating range suitable for both dispensing and rapid burst carbonation Ideal for seltzers and high-carbonation drinks requiring 30-40 PSI Includes Duotight adapters for EVABarrier tubing and 1/4" flare fittings with barbs, allowing for quick and adaptable gas line setups Heavy-duty steel gauges with rubber bumpers, robust body, and precision diaphragm ensure long-lasting, accurate pressure adjustments Compatible with standard US CO2 tanks and can be adapted for use with Nitrogen / Argon tanks This beefy, industrial-grade regulator will serve you well for years to come. The robust dual-body and precision diaphragms provide high flow rates, and the pressures can be easily and precisely adjusted with the hand dials. Extra thick stainless gauges come with rubber bumpers for added protection. The dial faces are triple-scaled to read in psi, bar and kPa. The PRVs are rated to 65 psi (4.5 bar) for added safety while in use. Comes with male flare thread outlets with included 1/4" barb and nut. Easily swap out the barbs to a different size if desired. On the back of the regulator body are three M6 screw holes for mounting (screws not included). It also comes standard with Duotight Adapters, allowing for quick connection of EVABarrier draft tubing for a solid, yet easy to change, way of connecting gas line. Add Duotight Tees to easily split the line to multiple kegs. The Komos Dual Body Regulator is a beefy, heavy regulator. If you are using with a 5 lb co2 tank you will need to keep your tank in stand or strapped down to keep the tank and regulator from tipping over. The regulator is CO2 ready with standard US CGA320 threads. It can also be used with Nitrogen or Argon tanks with the optional CGA320 x CGA580 Adapter. Features: 0–60 PSI operating range Low pressure gauge reads from 0–100 Pull ring PRV rated to blow off at 65 PSI Strong, robust design Highly accurate precision diaphragm 1/4" flare fittings with barbed outlets & Duotight adapters M6 mounting screw holes Made in accordance with AS 4267  

Read more less

The Taprite is our favorite dual-gauge regulator on the market. We've used them all and this unit represents the best quality at a great price. Key features are the easy hand adjusted pressure adjustment dial, barbed outlet, one way on/off valve, and built in tank connection gasket. Best of all is the consistent pressure regulation. With many regulators the pressure can 'creep' up over time. This unit is a rock. This is the T742HP model where the HP stands for high performance. Won't freeze up when multiple taps are running at once. The built-in gasket where the regulator connects to the CO2 tank, eliminates the constant replacement of fiber washers every time you change out your tank. The one way valve keeps beer from flowing back into the regulator when a keg happens to have more pressure than your regulator is pushing. Hand dial is easily turned to adjust pressure without the need for a screw driver. Optional available gauge cage is the best on the market. Low Pressure gauge reads from 0 to 60 psi. Built by Taprite, an American company. General Regulator Information A regulator controls the flow of CO2 gas that is under pressure. To ensure proper operation, please make sure that when in use your CO2 tank and regulator remain in an upright position. Do not physically modify the regulator in any way. Regulators work best at room temperature. If you use your regulator in the cold it will take up to 4 hours for the adjustment to register. For example: If you are at 10 PSI and you change the pressure to 12 PSI the regulator will move to 14 or 15 PSI over the next 4 hours. Once you have found the correct pressure the regulator will work perfectly fine but it will take some trial and error to get it adjusted. More Tips & Tricks: Are you out of CO2? When the needle reads half way in the red you are about 10% full. You should be able to push another 2-3gallons of beer when your at this amount of remaining gas. What is an ideal serving pressure? For most beers a pressure set at 10-12PSI is the sweet spot. Your beer has to be stored cold from 34-40F for this pressure to work properly. Is your beer serving a lot of foam? Don't panic this is not hard to fix. Your beer line must be 5-8 feet in length for this to work. Turn the black check valve to the close position (as pictured). Release the pressure from your keg's relief valve. Lower the pressure to 6-8psi by turning the flat head screw on the front of the regulator counter clock wise. Open the black check valve releasing CO2 to your keg. Try serving your beer. Is my beer over carbonated? Any beer that is stored under pressure above 12psi will become overcarbonated. If you're trying to speed up the process to carbonate your beer by raising your pressure anywhere from 15-20psi make sure you don't leave your beer at this pressure for more than 2-3 days. If you did this you will need to release all the pressure from the keg before serving and set your serving pressure at 4-6psi depending the carbonation of your beer. After a week you will have to raise your pressure back to the optimum 10-12psi serving pressure.

Read more less

The Zahm Model D.T. Piercing Device is used to test carbonated beverages for volumes of CO² gas in glass/PET bottles and cans. This instrument uses a dual scale pressure gauge (0-60 psi & 0-4.2kg/cm2) and an adjustable 2″ dial thermometer (25/125ºF & -5/55ºC). It is available in one and three liter sizes. The Series 6000 Piercing Device will provide rapid and accurate determination of gas volumes in alcoholic and non-alcoholic beverages when used with the two pressure/temperature charts furnished with the instrument. Two sizes are available. One that can test vessels up to 1L in size, and the other that can test vessels up to 3L in size.  

Read more less

This instrument is used to test beverage or product for CO² gas and air content in either glass or PET containers and cans. It is automatically adjustable to various size bottles and cans and is available in either one or two liter sizes. Two standard pressure/temperature relationship charts are furnished with the instrument for the determination of volumes of CO² gas in alcoholic and non-alcoholic beverages. The instrument is equipped with a dual scale pressure gauge (0-60 psi and & 0-4.2 kg/cm2) and an adjustable 2″ dual scale dial thermometer (25.125ºF & -5/55ºC). This piercing device is also equipped with a 100cc burette that measures up to 25cc’s of the product’s air content. The parts list and line drawing should be used for assembly and as a reference for ordering replacement parts. Headspace “air” is defined as atmospheric air picked up during the brewing process. These instruments do not measure dissolved oxygen. Two sizes are available. One that can test vessels up to 1L in size, and the other that can test vessels up to 3L in size.  

Read more less

With this adapter you can use a KOMOS CO2 regulator with a Nitrogen or Argon tank. Not all CO2 Regulators are suitable for use with a Nitrogen tank. Only for use with KOMOS regulator which is a dual gas regulator capable of handling Nitrogen and CO2 gasses. CGA320 male thread by CGA580 male thread. Compatible with KOMOS Dual Gauge and Dual Body regulators.

Read more less

This adapter allows you to attach a CO2 regulator to a SodaStream CO2 cylinder. The NEW and IMPROVED WilliamsWarn soda stream adapter has a fundamental design improvement to eradicate lost gas through the connector: a side adjustment for the pin valve into the soda stream bottle enables the pin valve to be engaged once the cylinder, adaptor and regulator have been screwed together. This ensures that the gas supply from bottle to the regulator can be engaged and disengaged whilst fully connected. Prior third-party versions of this Adaptor – which have been in our industry for the past 15 years – did not allow adjustment whilst connected which would often lead to C02 gas being leaked. The adapter is incompatible with our Taprite brand regulators.

Read more less

A nitrogren regulator used for Nitrogen and Argon - it will fit both tanks. A nitrogen regulator has a higher high-pressure gauge than a CO2 regulator. (The starting pressure in a Nitrogen/Argon tank will be about 2200 p.s.i. as opposed to 800 p.s.i for a CO2 tank.) CGA580. Tap-Rite brand nitrogen regulator. 5/16" barb. For more information on using gas for flushing vessels, please refer to MoreWine!'s Guide to Inert Gas in Winemaking

Read more less

If you're tired of losing gas every time you connect or disconnect your Sodastream cylinder to your normal Sodastream cylinder adapter, this new design is what you need. Unlike cheaper Sodastream cylinder adapters, this unit has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adapter. This pin adjustment makes the Sodastream cylinder adapter significantly easier to use. Some adapters require an Alan Key wrench to adjust the pin height, and depending on how worn out your seal is, you may need to adjust this pin periodically. Conventional, cheaper Sodastream adapters also tend to leak gas every time you connect and disconnect them from your regulator or the adapter itself. If you have a Sodastream Cylinder, you can use this adapter to connect it to a CGA320 CO2 Regulator. This is a great choice for mobile draft applications when you don't want to carry around your home draft system's 5 lb or larger CO2 tank. CGA320 Male Thread x TR21-4 Female Thread NOTE: Does not include CO2 regulator or Sodastream Cylinder seen in the example photos. KegLand Part Number: KL24662

Read more less

This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting. If you'd prefer a digital instant read gauge, check out the Digital Mini Pressure Gauge (for gas applications only). Pressure Range: 0-150 psi (0-10 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Note: These gauges are accurate to 10% of the whole pressure range. (ie the 0-30psi Gauge is accurate to +/- 3psi). KegLand Part number: KL1501

Read more less

Stainless steel liquid-filled pressure gauge with 1/4" MPT stainless connection. Reads in psi and standard atmosphere (atm).  

Read more less

Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows you run multiple pressures from one tank of gas. CO2 line from your existing system would attach to secondary input. Gas lines coming from the secondary can then be adjusted to different pressures (Pressure coming out of secondary can never be greater than what is coming in). Applications would include situations where you want different levels of carbonation in different beers or you want to run soda at a higher pressure than your beers. All secondaries have wall brackets for mounting. Barb fittings are 5/16thh ID. This is to go in line via flexible tubing, not to hard mount on to an existing regulator to make a product such as the D1065. Secondary regulators can be ganged (attached) together.

Read more less

This mini pressure gauge is compatible with the BlowTie 2 spunding valve, Duotight in-line regulator, and KegLand mini regulator. We recommend using the gauge with a range closest to your desired pressure setting. If you'd prefer a digital instant read gauge, check out the Digital Mini Pressure Gauge (for gas applications only). Pressure Range: 0-15 psi (0-1 bar) Body Dimensions: 26mm x 26mm x 15mm Probe Diameter: 8mm WARNING: Do not exceed gauge pressure. Exceeding the pressure range will damage the gauge. Note: These gauges are accurate to 10% of the whole pressure range. (ie the 0-30psi Gauge is accurate to +/- 3psi). Kegland Part number: KL14984

Read more less

Now you can have two different CO2 pressures coming from one tank.   It has three main uses: Serve different beers at different pressures Serve and carbonate at different pressures Serve soda or sparkling water on one tap and beer on the other Made by Taprite in the USA, the leading regulator manufacturer, so you can be assured that the quality is good. Barbs are 5/16".

Read more less

The Milwaukee MA957 CO2 Adjustable Flow Pressure Regulator is a High Quality brass fittings regulator, designed for long lasting use in your Aquarium and Hydroponics applications.  Can be used with all Milwaukee controllers. Set of one (1) per package. The Milwaukee MA957 High Quality CO2 Adjustable Flow Pressure Regulator has a Solenoid, a 4' cord, standard brass fittings, diaphram valves and a bubble counter. Designed to be used with ALL Milwaukee MCXXX Controllers such as MC122 and MC125.  

Read more less

Perfect for home use with compact keg setups or on the go for mobile dispensing Compatible with both 16g and 74g CO2 cartridges Features a 6.35mm Duotight-compatible barb for fast, hassle-free keg attachments The Duotight Mini CO2 Regulator is a simple, affordable choice for mini kegs and Oxebar keg setups. This compact regulator is designed to work with both 16g and 74g CO2 cartridges, making it ideal for home use or when you're on the go. With the 6.35mm Duotight-compatible barb you can connect just about anything within a matter of seconds. Simply pair it with the 6.35mm Duotight Ball Lock QD for a quick and hassle-free connection to your kegs. Or, with the Duotight Reducer, you can adapt the regulator for use with the most common and widely used 8mm Duotight accessories. For additional protection against liquid backflow, you can integrate a check valve along with some hosing to safeguard your regulator. Please note if liquid enters the regulator, it's no longer functional. Be extremely careful with overfilling your kegs or tipping them over when the gas has run out. The regulator is capped at 30 psi to ensure you do not accidentally over carbonate or exceed your keg's pressure rating. The gauge reads up to 60 psi to account for potential heat expansion so that it does not break the gauge. Suitable Gas Cartridges: 16g Cartridge 6-pack (KEG993) 74g Cartridge (KEG969) KegLand Part Number: KL42000

Read more less

This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. Triple-scaled to read in psi, bar, and kPa.   Kegland Part number: KL07696  

Read more less

This push-in pressure gauge comes with an 8 mm (5/16 in.) barb and is specifically designed to be compatible with 8 mm Duotight fittings. It's the ideal companion to the BlowTie Diaphragm Spunding Valve (FE960), allowing you to dial in your blow off setting for pressure fermentations or pressure transfers. Triple-scaled to read in psi, bar, and kPa. Kegland Part number: KL07696

Read more less

KegLand has developed the world's most compact mini digital gauge with backlight illumination. This very compact design retains high accuracy while still meeting the desirable small form factor.  This meets the growing need as mini keg systems, mini regulators and other more compact keg dispensing solutions are required. Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age-old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge, it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components. Specifications: Battery Life: More than 2 years (using the mini gauge once a day) Battery Type: CR2032 Auto Battery Saver: automatically turns off after 15 sec Size: 27mm x 27mm (1" x 1") Duotight Stem: 8 mm KegLand Part Number: KL18081 Please note: This gauge is not suitable for measuring pressure of liquids.  It is only for measuring gas pressure.  If liquid gets into the pressure transducer it will damage the gauge.  

Read more less

Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows you run multiple pressures from one tank of gas. CO2 line from your existing system would attach to secondary. Gas lines coming from the secondary can then be adjusted to different pressures (Pressure coming out of secondary can never be greater than what is coming in). Applications would include situations where you want different levels of carbonation in different beers or you want to run soda at a higher pressure than your beers. All secondaries have wall brackets for mounting. This is to go in line via flexible tubing, not to hard mount on to an existing regulator to make a product such as the D1065. Secondary regulators can be ganged (attached) together.

Read more less

Dual gauge oxygen regulator for disposable oxygen cylinders. Measures gas remaining in the tank and allows the psi of the oxygen leaving the tank to be adjusted. Gauges read in psi and kPa. Kegland Part number: KL02165

Read more less

Brand new aluminum 2.5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 2.5 lb tank because it holds 2.5 lbs of compressed (liquified) CO2. 2.5 lbs of CO2 is enough to dispense about 4x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 14.75" T x 4.375 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks  

Read more less

Replaces a broken gauge on the pump for a variable volume tank lid.

Read more less

Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 18" T x 5.25 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks  

Read more less

Push different CO2 pressures to different kegs using your existing CO2 set up. Secondary regulators do not attach directly to CO2 tanks. They are designed to be used inline when you already have our dual gauge CO2 regulator, D1060. A secondary regulator allows you run multiple pressures from one tank of gas. CO2 line from your existing system would attach to secondary input. Gas lines coming from the secondary can then be adjusted to different pressures (Pressure coming out of secondary can never be greater than what is coming in). Applications would include situations where you want different levels of carbonation in different beers or you want to run soda at a higher pressure than your beers. All secondaries have wall brackets for mounting. This is to go in line via flexible tubing, not to hard mount on to an existing regulator to make a product such as the D1065. Secondary regulators can be ganged (attached) together.

Read more less