Products

Our new FTSs quick disconnect kit is the perfect way to increase the efficiency of your cooling system while also making it easier to detach your fermenter's chiller coil for easy cleaning.  The neoprene sleeve both insulates and wicks away condensation to reduce temp loss in your FTSs tubing. The sleeve is 10 feet in total length and can be cut to custom lengths to adapt to any FTSs setup.  Once cut, use the included velcro strip to secure the sleeve to the quick disconnect fitting. The quick disconnect fitting was custom tooled for Ss Brewtech with 3/8" hose barbs and features all EPDM seals, which maintain sealing properties at low temperatures.  In addition, they include all stainless internal hardware, and integrated valves in both the male and female components to prevent spilling. These fittings work great with either glycol or chilled water from a cooler.  One Quick Disconnect option: (1) 10' Neoprene Sleeve (1) Quick Disconnect Fitting (2) Velcro strips (4) Stainless hose clamps Two Quick Disconnect option: (1) 10' Neoprene Sleeve (2) Quick Disconnect Fitting (4) Velcro strips (8) Stainless hose clamps  

Read more less

Featuring a hi-torque DC motor combined with a leveraged gear reduction system that drives a series of billet aluminum pulleys and high inertia rollers make easy work of the toughest wheat and rye malts. Features: All-In-One Design Differential Speed Rollers Machined Fluted Stainless Steel Rollers Precision Gap Adjustment Extruded Aluminum Chassis Specs: 350 lb/h 25 lb Hopper 0.5 - 2.0mm Gap Range 18" Width x 19.5" Height x 9" Depth Plugs into standard 110 volt wall socket. Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.  

Read more less

The Inline Oxygenation Kit from Ss Brewtech!   Features: Designed to oxygenate wort during transfers to BME Chronicals and Unitanks Fully welded oxygen stone, with all sanitary 1.5" TC connections 1.5" TC oxygen stone, 1.5" TC Micro Tee, and 1.5" TC Sight Glass (2) 1.5" TC Clamps, and (2) 1.5" TC gaskets included 3/8" barbed oxygen inlet with ball valve to control flow All 304 stainless construction  

Read more less

The Ss Brewtech Keg WaSsher offers the homebrewer a convenient way to clean any classic Cornelius-style kegs (Corny or other similar variants).  To operate, simply remove the keg’s lid, tilt and insert the spray ball attachment into the keg’s lid opening, and then rotate the keg to secure the lip against the WaSsher’s silicone baseplate seal.  Secure the locknut and snug the entire assembly down.  Attach the two ball lock quick disconnect fittings to the gas-in and liquid-out postsensuring there are no kinks in the silicone tube.  Lastly, turn your keg upside down and put the entire assembly into a standard 5-gallon bucket that contains 2 gallons of your preferred cleaning solution, then activate the pump.  Now go grab a beer and relax while the Keg WaSsher does the rest.  No need to disassemble or remove QD posts, dip tubes, or other fittings, all parts are cleaned in place.  No more extra-long scrub brushes or elbow grease.  Since we designed this washer to fit inside a 5-gallon bucket, you can easily clean kegs in batches by setting up a wash station with 3 discrete buckets to perform cleaning, fresh water rinse, and acid sanitizer cycles.  All while leaving the washer attached to a single keg, just jump from one bucket to next until the keg is cleaned, sanitized and ready for use.  Since the Keg WaSsher only requires 2 gallons of cleaning solution, the result is less chemical waste and less environmental impact than traditional cleaning methods. Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

Read more less

Compatible with the new T.C. model and the original InfuSsion Mash Tun. This kit is designed to include all the necessary components to use the recirculation bulkhead included with the InfuSsion Mash Tun for vorlauf and mash recirculation processes. To install the kit on a standard mashtun begin by installing the included 1/2" FPT x 1/2" Barb on the exterior of your mash tun's recirculation bulkhead.  Be sure to use PTFE tape for a liquid-tight seal. If using the supplied kit on a TC mashtun, begin installation with included 3/4" TC to 1/2" 90 Barb, 3/4" TC gasket and clamp. Next, locate the 3/8" knurled locknut, 3/8" silicone tubing, and recirculation manifold.  Trim the tubing to your desired length, and then use the hose clamps to secure the two ends of the tubing to the manifold and locknut.  As a best practice, begin the mash recirculation for the first 5-10 mins using the vorlauf attachment to clear any small grain particulate and to set the mash bed, then swap the vorlauf attachment for the recirculation manifold for the remainder of the mash rest.  Please keep in mind this kit is designed to use with a wort pump and an external heat source, such as a RIMS tube to maintain mash temps, which is not supplied. Includes: Recirculation Manifold Vorlauf Attachment 3/8" Barb to 1/2" FPT Knurled Locknut (2) 3/8" Stainless Hose Clamps 1 Foot of 3/8" ID Silicone Tubing 1/2" FPT to 1/2" Hose Barb or 3/4" TC barb with gasket and clamp 3/4" TC to 1/2" 90 Barb ( for use with TC Mashtun )  3/4" TC Clamp ( for use with TC Mashtun )  3/4" TC Gasket ( for use with TC Mashtun )     

Read more less

Ss Brewtech Sampling Coil. Only fits the Ss Brewtech sample valve (H586). Features: All 304 Stainless 10 Turn Proof Coil 5.5 feet of stainless coil allows for sampling under pressure Coil is welded to compression body Compatible with all Ss Brewtech Unitanks Compatible with all Ss Brewtech Pro Unitanks Stainless tubing is 3 mm ID and 4 mm OD

Read more less

A quality 304 Stainless Brew Kettle can last a lifetime of home brewing. The Ss TC Brew Kettle is constructed from 304 stainless steel and features an aluminum core Tri-Clad bottom to foster even heating and minimize the risk of scorching and allow for the use of induction heating. Tri-Clamp (TC) ports have long been the standard in professional brewing, and for a good reason, they're quick, sturdy, and sanitary.  The Ss TC Brew Kettle now brings this pro-level feature to the home brewer in an affordable package. Our sturdy riveted silicone-coated handles are now located on the front and back for easy moving and dumping of the kettle while also allowing for tighter brew stand setup. Just like our original Ss Brew Kettle the TC version features an integrated trub dam into the dip tube to minimize the pickup of trub and hop material during knockout. The result is much clearer wort making its way into the fermenter. Features: Tri-Clad bottom Sanitary TC Ports Sturdy riveted silicone coated handles 3-piece TC ball valve with trub dam pick-up tube Lid designed to hang on side of handles Etched volume markings gals/liters Induction burner compatible Included Hardware: (2) TC Clamps (2) Silicone Clamp Gaskets 3-piece TC Ball Valve Dip Tube w/ Trub Dam Silicone Trub Dam Blade TC Port Plug Specs: Size Capacity Diameter Height 10 gal 10.7 gal 13.8" 16.5" 15 gal 15.7 gal 15.8" 16.5" 20 gal 22.7 gal 17.7" 21.3" 30 gal 31.1 gal 19.7" 23.7" 50 gal 53.0 gal 23.6" 28.3"    

Read more less

A quality 304 Stainless Brew Kettle can last a lifetime of home brewing. The Ss TC Brew Kettle is constructed from 304 stainless steel and features an aluminum core Tri-Clad bottom to foster even heating and minimize the risk of scorching and allow for the use of induction heating. Tri-Clamp (TC) ports have long been the standard in professional brewing, and for a good reason, they're quick, sturdy, and sanitary.  The Ss TC Brew Kettle now brings this pro-level feature to the home brewer in an affordable package. Our sturdy riveted silicone-coated handles are now located on the front and back for easy moving and dumping of the kettle while also allowing for tighter brew stand setup. Just like our original Ss Brew Kettle the TC version features an integrated trub dam into the dip tube to minimize the pickup of trub and hop material during knockout. The result is much clearer wort making its way into the fermenter. Features: Tri-Clad bottom Sanitary TC Ports Sturdy riveted silicone coated handles 3-piece TC ball valve with trub dam pick-up tube Lid designed to hang on side of handles Etched volume markings gals/liters Induction burner compatible Included Hardware: (2) TC Clamps (2) Silicone Clamp Gaskets 3-piece TC Ball Valve Dip Tube w/ Trub Dam Silicone Trub Dam Blade TC Port Plug Specs: Size Capacity Diameter Height 10 gal 10.7 gal 13.8" 16.5" 15 gal 15.7 gal 15.8" 16.5" 20 gal 22.7 gal 17.7" 21.3" 30 gal 31.1 gal 19.7" 23.7" 50 gal 53.0 gal 23.6" 28.3"    

Read more less

A stable mash temp is one of the most important elements of the brewing process. The Ss Brewtech InfuSsion Mash Tun is the perfect choice for brewer’s looking to upgrade their aging plastic cooler. It’s built to last, made exclusively of 304 stainless steel and designed for those who want professional grade equipment and features for their home brewery. The double walled construction with injected high density foam insulation is incredible at mitigating temp loss and holding temperatures stable throughout the duration of a typical mash rest. The venerable InfuSsion Mash Tun has been updated with TC ports throughout for easy integration with the rest of the Ss Brewtech line up. Additionally, the InfuSsion Mash Tun is the first Ss product to be released with the Patent Pending Pure Flow Valve platform. Fully sanitary, easy to clean, and micro adjustable Pure Flow valves are designed as the ultimate brewing valve. Features: 304 Stainless steel construction 1” thick insulated side walls and lid Sanitary TC ports 5° sloped floor with center drain eliminates dead space Gasket sealed stainless steel false bottom 1.5" TC Pure Flow Valve 3/4" TC recirculation bulkhead Redesigned feet with locking screw  Redesigned LCD thermometer Etched volume markings gals/liters What's Included: InfuSsion Mash Tun LCD thermometer (°F/°C) Silicone thermometer boot (2) 1.5" TC clamps (2) 1.5" TC gaskets Pure Flow Valve 1.5" TC Thermowell Silicone plug for recirculation hole 3/4" TC recirculation bulkhead Perforated false bottom Silicone false bottom gasket    

Read more less

Set of two pieces below. Not for Brewmaster kettle. Only for Brew Kettle Mini. 1 pc. 3" dial type thermometer Accurate to +/- 1% (full span) 1 pc. 1/2" female threaded bulkhead 304 Ss construction Hi-temp silicone o-rings Fits into 13/16" punch hole  

Read more less

The Unitank 2.0 features 50% more cooling surface than the previous generation for better cooling efficiency and crashing performance. Manufactured with professional level quality that has been the standard for Ss Brewtech's professional-level Unitanks New Ss Brewtech Racking Arm co-molded with the geometry of the valve body and TC gasket which prevents the arm from coming loose Quickly carbonate beer in under 24 hours using the carb stone while precisely monitoring head pressure Adding an optional Sspunding Valve to the Unitank gives the brewer the ability to ferment under pressure An evolutionary step forward in homebrew technology. The Unitank 2.0 builds upon the venerable Unitank line by increasing the full body wall thickness from 1.2 to 1.5mm 304 Stainless Steel. Then we added a fully laser welded, professional-grade jacketed cooling solution to the already advanced feature set the original Unitank is known for. With up to 50% more cooling surface area, maintaining a stable temperature and crashing your beer has never been more efficient. Jacketed Cooling The benefits of jacketed cooling are numerous, and such engineering has become the standard in Ss Brewtech professional Unitanks for years. With Unitank 2.0, those same benefits are available to the 5, 10, 15 and 31 gal home or nano brewer. When paired with FTSs Touch and Ss Glycol Chillers, the Unitank 2.0 can provide an uncompromised level of fermentation control. The increased surface area of jacketed cooling allows more precise temp control not seen in the home brew industry. Additionally, the added surface area allows the fermenter to crash cool in even the most challenging environments. Another benefit of moving to jacketed cooling is that removing the coil makes the cleaning process much more straightforward. When used with the Ss Brewtech CIP ball, cleaning can be performed just as the pros do in craft breweries. Staggered inlet and outlet ports for the glycol jacket help with even coolant distribution in the jacket. The rear-mounted thermowell cleans up the coolant control wiring for an even more professional setup. Keyed Racking Arm Like the Chronical 2.0, the Unitank 2.0 features a version of the new Ss Brewtech Racking Arm co-molded with the geometry of the valve body and TC gasket; this ingenious design captures the racking arm and prevents it from coming loose. Additionally, the keyed elements of the valve allow the brewer to know precisely what direction the racking arm is facing based on the orientation of the valve on the vessel. What's more, the Unitank valve is the same full pressure-rated valve used on professional Ss Brewtech equipment. All the Valves & Ports The Unitank 2.0 continues with all the beloved features of the original Unitank. On top of all the fully welded TC connections and pro features, the Unitank 2.0 allows the brewer to quickly carbonate beer in under 24 hours using the carb stone while precisely monitoring head pressure. After fermenting and carbonating, the brewer can perform a true pressurized and closed transfer to a keg or canning machine significantly reducing the chances of oxidation when compared to open transfers. Higher pressure limits allow the user to dispense beer directly out of the vessel. Lastly, adding an optional Sspunding Valve to the Unitank  gives the brewer the ability to ferment under pressure and gives them the option to use the final few gravity points left of active fermentation to naturally carbonate their beer instead of force carbonate. This feature set and flexibility are why pro brewers use Unitanks in their brewing and packaging processes. Features: Welded Cylinder Glycol Jacket Fully welded TC flanges 15 PSI operating pressure Rotatable Silicone Racking Arm 1.5” TC Butterfly Valves 1.5” TC Carb Stone with 3/8” ball valve 1.5” TC Blow Off Arm with Welded Blow Off Arm Mount 1.5” TC to ½” Ball Valve for Blow Off Cane 1.5” TC Pro Sanitary Pressure Gauge 1.5” TC Pro Sanitary Sampling Valve 1.5” TC Thermowell 3” TC Pressure Relief Valve (PRV) 6” TC to 3" TC Lid Reducer (Dry Hop, CIP, and PRV Port) Neoprene Insulation Jacket Stainless Lower Shelf Adjustable Feet

Read more less

The Ss Brewtech Whirlpool fitting attaches to the thermometer port, the recirculation port, or another 7/8" hole. Creates a nice whirlpool action that works perfectly with a trub dam to keep out most of the hop matter and other solids from your fermenter. Made from 304 stainless steel. The whirlpool fitting has a 1/2" MPT and comes with 1" x 1/2" bulkhead. Please note this product is intended to be used with a 1/2" FPT ball valve (BE382) on the outside of the kettle. Please see the Whirlpool Fitting Quick Reference Guide below for installation and operation instructions.

Read more less

Replacement lid for 7 gal Brew Buckets. 304 Stainless steel 17mm punched hole for airlock/tubing Gasket included 

Read more less

Designed to adapt weldless punched holes into 1/2" female threaded connection ports. 1/2" Female threaded 304 Stainless steel Hi-temp silicone o-rings Fits into 13/16" punch hole

Read more less

These caster wheels are designed to move empty half bbl and under vessels. 1BBL vessels should use HD | Casters. Older 7 gal Legacy Chronicals do not have threaded feet and use the Caster Boots instead.  Kit includes 3 or 4 casters with leveling washers Compatible with Chronicals series, Unitanks, and Brite Tanks 3/8" x 1.5" stem Includes brake High-quality PP wheels Double bearing wheels Click here for Quick Ref *Not intended to be moved when full, damage can occur. *Not for Nano Jacketed Tanks.

Read more less

This clean in place spray ball from Ss Brewtech attaches to a 1.5" tri clamp to clean the inside of whatever container you attach it to. Has a 1/2" MPT and made from 304 stainless steel. The attachment is 2.5 in. long and 0.75 in. wide. 1.5" tri clamp gasket and clamp not included. A pump capable of 29 PSI minimum is recommended for this product. Does not fit Chronical BME, Chronical 2.0, or Unitanks.  

Read more less

CIP (clean in place) is a commonly used technique to clean large craft brewing vessels. At Ss, we've taken the same principles used in our pro fermenters and scaled the design down for homebrewers to speed up their cleaning process and improve their sanitation practices, just like craft breweries. 304 Stainless steel construction 3" TC 1/2" MPT fitting Recommended to use with the 1/2" Hose Barb 2 bar / 29 psi / 7 gpm flowrate recommended Does not include TC clamp or gasket Pro version has a larger spray ball designed for larger pumps (17 GPM) and vessels 1BBL and larger.

Read more less

FTSs2 Power Supply Replacement | 8 Amp Compatible with Dual Stage FTSs2 (cooling and heating) and MTSs Controllers.

Read more less

Designed to make moving unfilled brewing vessels easier. HD casters are designed for use on our fermenters and brite tanks 1BBL and under. Also can be used with our Ss Grain Mill Cart and other modular Brew Cubes. Not for use with our Nano Jacketed Unitanks.  Stainless Steel caster frame with brake Designed for harsh brewery wash-down environments Ideal for use with Half BBL and 1BBL vessels 3" wheel diameter 3/8" UNC x 2"  Zinc coated stems 250 lb static load rating per caster Includes stainless washer leveling kit The installation guide can be found here. Please note proper installation is required to prevent damaging the casters. *Not intended to be moved when full. *Not For Nano Jacketed Tanks

Read more less

Racking Arm Replacement  Item(s) Included (1) Racking Arm Replacement (2) Replacement  set of O-rings included 

Read more less

IP55 Water Resistant Rating: Ready to handle the messiest brew days and easy cleanup. Magnetic Drive: Ensures smooth, efficient, and sanitary wort transfer. 360° Pro DIN Fitting: Allows for secure, sanitary, and easy connection with customizable outlet placement. 1.5" TC Center Inlet Head: Engineered for advanced brewing setups including mash recirculation and transfer. Inspired by countless brew days in our garages and basements, as well as our experience in professional breweries, Ss Brew Pump is our take on a classic piece of brewing gear that is key to so many homebrew setups around the world.

  Featuring an IP55 Water Resistance Rating, an easy-to-use DIN Head, Magnetic Drive, and 1.5” TC Center Inlet Head, Ss Brew Pump is engineered to tackle even the messiest of brew days! IP55 | Water Resistant Just like the high-quality pumps found throughout craft breweries, the Ss Brew Pump is IP55 certified and ready to handle the messiest of brew days. From the Ground Up Designing our own pump is something we have been eyeing for a while. Pumps are critical to any form of advanced brewing. From mash recirculation to transferring wort to cleanup, a quality pump is a key part of every brewday. Years of working in professional craft brewing environments, where water-resistant pumps are the norm, made the foundation of our brew pump an easy decision. It had to be IP55 rated to handle the unavoidable messes that happen and the cleanups that follow them. Once we unlocked the design for waterproofing, we turned to a laundry list of specs and features we wanted. That led to the creation of the Ss Brew Pump; one of our favorite products and now a staple in all of our team’s homebrew setups. Magnetic Drive It’s no secret that magnetic drive pumps are perfect for brewing applications. Instead of using a direct drive system where sealing off the wort from the drive shaft and motor is a major concern, Ss Brew Pump uses a high-end magnetic drive that allows for smooth, efficient, and sanitary operation. 360° Pro DIN Fitting Commonly found on Pro Brewing Tanks, DIN fittings allow for a secure and sanitary connection that is also super easy to use. Unlike a TC connection, the DIN Head on Ss Brew Pump allows for a secure connection that applies even pressure on every bit of the silicone seal and is easier to remove and reinstall without having to fumble with a large clamp. The DIN Head can also be rotated and secured in a full 360 degrees so that you can place the Pump’s outlet exactly where you need it for your brewing setup.   Note: Ss Brew Pump is currently not compatible with Legacy versions of Brew Cube | Pump Mount Plate Kit, Brew Cube | Valve Tree Manifold, and Portable Valve Tree. Ss Brew Pump uses a larger mounting plate and the bolt holes to secure it are in a different pattern than the Chugger pumps these products were originally designed for. We are working to update these products and plan to have them available soon. What's Included: Ss Brew Pump 50-120 DIN Pin Wrench Specifications: 11 gallons per minute flow rate 18 ft Max Head IP55 Water Resistant Sanitary DIN Fitting Stainless Head with 1.5" TC Center Inlet 120 VAC 60hz 0.7 A Assembled dimensions: 5.5” x 4.5” x 9.75” Package dimensions: 7.25” x 7.25” x 12” - 11.75 lbs

Read more less

Keeping trub and hop material in your kettle and out of your fermenter is one of the critical components to ensuring clear beer in your pint glass! On top of that, brewing with whole cone hops can introduce a lot of hop leaf material that easily overwhelms and clogs transfer lines creating lots of headaches. Ss Hop Spider helps with these challenges by containing hop material within a fine mesh, photo-chemical etched basket. The basket sits inside a custom-designed ring mount with Silicone Adjustment Arms so you can dial in the Hop Spider for the perfect fit on your kettle.  Intended for use with SVBS, Ss Brewtech TC Brew Kettles(10 gal, 15 gal & 20 gal), and Ss Brewtech eKettles. Not compatible with Ss Brewtech 30 gal & 50 gal Brew Kettles and Ss Brewtech 5.5 gal Mini Brew Kettle.  Features: 400 Micron Photo-Chemical Etching Adjustable Mounting Arm Removable Basket for Easy Cleaning Specifications: 304 Stainless Steel and High Temp Silicone 6” Basket Diameter 15.5” Basket Height 15" Adjustment Arm Minimum Length 18" Adjustment Arm Maximum Length Package Dimensions: 11"H x 9.5"W x 19"L 6lbs

Read more less

The Vorlauf Arm Assembly is great for recirculating your mash. It fits right into the Ss Brewtech recirculation bulkhead fitting with a 1/2" knurled FPT locking nut. Made from 304 stainless steel.

Read more less

A Pressure Relief Valve upgrade or replacement for the Chronical line of fermenters from Ss BrewTech. Features: Standard replacement part for Half Barrel Can be retrofitted to 7 Gal Chronical lid Releases pressure between 2-2.5 psi Food grade silicone O-ring Use Dewalt DWA1783IR step bit for retrofit For 7/32" inch hole diameter (in lid)

Read more less