Beer Making
-
Pipe Cutter
This easy to use pipe cutter makes cutting copper, stainless steel, or aluminum tubing an absolute breeze. Easy to use and compact so it can get into tight corners and gives you a clean pipe cut. Simply hand tighten the pipe cutter onto the mark where you want to cut the pipe. Rotate the cutter around the pipe a couple of times to create a groove all around the pipe, and then each time you rotate the cutter, tighten the blade a little. Each rotation will cut a little deeper into the pipe and the cut will be straight. Suitable for 1/8"-3/16" pipe (3-22 mm) Cuts copper, brass, aluminum, steel, and stainless steel Heavy-duty one-piece slide Polished roller for easy rotation Hardened steel cutting blade Kegland Part Number: KL14557
$7.69
-
Cannular Replacement Mounting Bracket
Replacement Mounting Bracket for Cannular can seamer.
$4.39
-
Cannular Replacement Base Locker
Replacement Base Locker for Cannular can seamer. Compatible with Cannular Manual Seamer and Cannular Pro.
$14.49
-
Replacement Turntable Base for Cannular Manual Can Seamer
Please Note: This part is intended to be used with the Manual Cannular Seamer (CAN100) which has been superseded by the Cannular Pro. This item will not work with the Cannular Pro (CAN110). Replacement Turntable Base for Cannular can seamer. (CAN100). Not compatible with the Semi Auto Cannular Pro model. KegLand Part Number : KL13345
$32.99
-
Cannular Replacement Power Switch
Replacement On/Off Power Switch for Cannular can seamer. This part is compatible with both the Manual and Semi-Auto units. NOTE: the switch might be yellow or blue. You can tell the Operation Switch from the Power Switch by testing the button. The Operation Switch can be depressed/pushed in while the Power Switch will only click when pressed. KegLand Part Number: KL13253
$8.79
-
Cannular Replacement Rubber Foot
Replacement Rubber Foot for Cannular can seamer.
$4.39
-
Cannular Replacement Anderson Plug
Replacement Anderson Plug for Cannular can seamer.
$2.19
-
KOMOS® Standard Kegerator Replacement Rolling Casters
This set of rolling casters is a direct replacement to those included with the KOMOS V2 Kegerator. They can also be used in your own kegerator or keezer build project by simply attaching them directly to the unit. Mounting hardware not included. Set of 4 caster wheels. 2 locking, 2 non-locking.
$21.99
-
Beer Faucet Shank | Stainless | 6" | Intertap® | NukaTap®
Stainless Steel Faucet Shank for running beer through the door of a kegerator or keezer. 1/4" Barb and collar are included, and reduce the through wall length to 4-1/2". Dimensions: 7-1/8" - Total Length (Tip to Tip) 6" - Shank Length (Without Nut & Barb) 5" - Thread Length 4-1/2" - Pass Through Length Kegland Part number: KL01120
$43.99
-
UltiMill Upgrade Kit
This kit contains all the parts needed to upgrade the MILL1001 to the MILL1001A released in June of 2019. It includes two new side plates, two larger bearings for the driven roller, a new driven roller, a new pulley shaft and a new left hand threaded allen for the roller. This kit is intended for homebrew shops and probrewers that are using their mills continuously. The upgraded bearings last considerably longer. Kit Includes: Driven roller 2 Side plates 2 bearings Pulley shaft Left-hand threaded roller bolt
$307.99
-
Ball Lock QD with Adjustable PRV
This stainless QD with adjustable pressure relieve valve is a great accessory to have when performing pressure transfers. Made from stainless steel components for long-lasting quality. Features the Torpedo Keg gas-in disconnect and adjustable stainless gas pressure relief valve (D1833L). Looking for a PRV alve with pressure gauge? Check out the FIL42AS.
$38.49
-
Ball Lock QD With Pressure Gauge and Adjustable PRV
This Ball Lock QD With Pressure Gauge and Adjustable PRV is a great accessory to have when performing pressure transfers. Made from stainless steel components for long-lasting quality. Features the Torpedo Keg gas-in disconnect and adjustable stainless gas pressure relief valve (D1833L). This model also features a pressure gauge that reads from 0-15 psi. Don't need the gauge? Check out the FIL42S.
$54.99
-
Perlick Beer Faucet 690SS Flow Control with Push-Back Creamer
The innovative forward sealing Perlick beer faucet with flow control now featuring a push-back creamer. Flow control can help reduce foaming issues no matter what beer line size or length you're using. The push-back creamer feature enables the operator to finish every pour with just the precise amount of foam. Constructed of 304 stainless steel! More on Perlick's Forward Sealing Design The #1 feature of Perlick faucets are their forward sealing design. Why is that so important? In an ordinary, rear-sealing faucet, the entire faucet must drain out of beer. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain out. Because beer drains from the entire faucet the faucet remains sticky and is prone to contamination from the left over residue. The Perlick faucet, with its forward sealing design, only has beer drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination. . Please note: In order for the push-back creamer to function properly, you must avoid overtightening the tap ferrule. If you're unable to push-back on the faucet lever, check that there's enough room between the tap ferrule and the friction bonnet and back off the tap ferrule as needed.
$104.99
-
Omega Yeast | OYL-501 Gulo® Ale | Beer Yeast | Double Pitch | 225 Billion Cells
Gulo Ale is the latest creation to emerge from the curious minds of our R&D team. The progeny of Omega's Irish Ale and French Saison strains, this true genetic hybrid is a beast at devouring sugars, which creates a very dry beer without any of the peppery, clove phenolics associated with saisons and Belgian ales. Expect a citrus-forward aroma with hints of peach and a clean finish. Gulo Ale excels in any style where a high level of attenuation is desired without phenolics. We love using it in an IPA (including a brut IPA), stout, or Bière de Garde. Non-phenolic. Patent Pending. This strain tests positive for the STA1 gene, an indicator of Saccharomyces cerevisiae var. diastaticus, and is capable of fermenting dextrins, resulting in very high attenuation. Attenuation: 85-90% Flocculation: Medium Alcohol Tolerance: 12% ABV Optimum Fermentation Temp: 68-77°F Cell Count: 225 Billion Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$14.99
-
Omega Yeast | OYL-011 British Ale V | Beer Yeast | Double Pitch | 225 Billion Cells
A good top cropper thought to be from a famous Manchester bitter maker, British V’s lingering haze and residual sweetness pairs popularly with the signature look and huge, fruity hop profile of the New England IPAs (NEIPA). Alternately, try DIPA (OYL052) for slightly less residual sweetness. Attenuation: 71-75% Flocculation: High Alcohol Tolerance: 10% ABV Optimum Fermentation Temp: 64-74°F Cell Count: 225 Billion Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$14.99
-
Anvil Brewing Thermometer - Weldless
The Anvil Brewing Equipment brewing thermometer is a high quality dial thermometer, offered in an easy to install weldless model or with 1/2" NPT threads (MT591). Weldless models only require a 1/2" hole for installation! The 2.5" long stem reads accurately without getting in the way. Reads from 45-220°F (7-100°C).
$27.49
-
Anvil Brewing Thermometer - 1/2 in. NPT
The Anvil Brewing Equipment brewing thermometer is a high quality dial thermometer, offered with 1/2" NPT threads or an easy to install weldless model (MT592). Weldless models only require a 1/2" hole for installation! The 2.5" long stem reads accurately without getting in the way. Reads from 45-220°F (7-100°C).
$25.49
-
Anvil O2 Wand with Regulator - 10 Micron
The heavy duty tube with integral barb is an extra-long 24" to reach the bottom of fermentors. This high quality product will help provide an optimal environment for yeast and fermentation. Features: Heavy duty tube with integral barb Easily sanitized stainless diffusion stone Extra long 24" wand Ideal for oxygenating wort for improved yeast health 10 micron diffusion stone To Use: Soak hose and wand in sanitizer - do not immerse regulator Slide hose onto end of wand barb Connect flare end of hose to regulator Place wand into the bottom of the fermentor Gradually increase the flow of the regulator until bubbles are visible Slowly stir for 1 minute for every 5-10 gallons Turn off regulator and remove wand from fermentor Sanitize as above and dry thoroughly before storing
$67.99
-
Anvil Kettle Strainer
Anvil Brewing Equipment’s Kettle Strainer is just what you've been waiting for. The durable stainless construction works hard to efficiently filter hops and trub. Features: Proprietary filtration screen efficiently filters hops and trub Plug resistant Attaches directly to ANVIL™ Kettles and 1/2" Diptubes Easily Cleaned Durable stainless construction Patent pending design
$53.99
-
Anvil Stainless Steel Spoon - 21 in.
Heavy duty 16 gauge stainless steel commercial grade spoon is 21" long and will last an eternity. Twice the thickness of most imported spoons. The convenient hang hook lets you rest it on the kettle or just about anywhere.
$20.99
-
Anvil Mash Paddle Stainless Steel - 24 in. (With Holes)
Heavy duty 16 gauge stainless steel commercial grade spoon is 21" long and will last an eternity. Twice the thickness of most imported spoons. The convenient hang hook lets you rest it on the kettle or just about anywhere.
$31.99
-
Anvil Brewing Pump
The small batch brewers dream pump! The Anvil Brewing Pump is perfect for recirculating and transferring wort. Features: Tool-free Disassembly Quiet Operation In-line Switch 6 ft. Cord Sized for 1/2 in. Hoses Max Flow - 3 GPM Max Lift - 7 ft Voltage - 120V 60Hz Current - 0.75A
$65.99
-
Anvil Forge Burner Natural Gas Conversion Kit
This kit will convert your Anvil Forge Burner to use natural gas. Includes: Needle Valve Forge Natural Gas Orifice Fitting
$18.49
-
Anvil Cooling System for Bucket Fermenter - 7.5 gal.
Temperature control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the ANVIL cooling system, you won't be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or a glycol chiller. System Includes: Sanitary Stainless Steel Cooling Coil 12" Sanitary Stainless Steel Thermowell 4 Hole #7 Stopper Submersible Pump - 12V DC Max Head - 16 ft (2) 5 ft Vinyl Cooling Hose Insulated Fermentor Jacket Anvil Temperature Controller
$163.99
-
MoreBeer!® UltiMill | Replacement Roller Bearing | Steel Ring Ball Bearing | 1/2" x 1-1/8" | R8-2RS
Permanently lubricated sealed ball bearing for 1/2" shaft diameter. Direct replacement roller bearing for the MoreBeer! UltiMill.
$39.99
-
Anvil Foundry™ Recirculation Pump Kit - 6.5 / 10.5 gal.
Anvil Foundry Recirculation Pump Kit for 6.5 / 10.5 gal units. Features: Anvil Recirculation Pump 4 ft. of Silicone Hose 4 Hose Clamps Flow Clamp Stainless Return Tube Perforated Disc Eye Bolt & Nuts for Eye Bolt
$109.99
-
DigiMash Electric Brewing System | Gen 2 DigiBoil | 65L | 17.1G | 220V
The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 65L DigiBoil, false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. This model runs off 220V power and has three heating elements (2000w, 1000w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). DigiBoil Features: 304 stainless steel construction 17 gallon total capacity Digital temperature control 220V / 20A power NEMA 6-30P plug (4.5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed Mash Upgrade Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen NOTE: Due to the size of this item, it is not eligible for international shipping.
$429.99
-
DigiMash Electric Brewing System | Gen 2 DigiBoil | 35L | 9.25G | 220V
The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 35L DigiBoil, false bottom, malt pipe with bottom screen, wire support, and malt pipe handle. This model runs off 220V power and has dual heating elements (1900w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). DigiBoil Features: 304 stainless steel construction 9 gallon total capacity Digital temperature control 220V / 15A power NEMA 6-30R plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C Recommended max. grain bill - 18 lbs Recommended min. grain bill - 8 lbs External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W ETL Listed Mash Upgrade Includes: False bottom Malt pipe Wire support Malt pipe handle Malt pipe bottom screen
$299.99
-
Stainless Steel Growler Filler - Fits Perlick 630SS & 650SS
Growler filler attachment for Perlick 630SS and 650SS faucets. 3/8" barb.
$10.99
-
Blichmann Spunding Valve - Tri-Clamp
The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features: Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Offered in ½” NPT and Tri-clamp models for the ultimate in adaptability Integral blow-off barb fitting adds a visual indication of fermentation if desired Tri-Clamp model is ideal for most pressure fermentors with T.C. fittings Also available in NPT model (BL151)
$103.49
-
Blichmann Spunding Valve - NPT
The Blichmann Engineering™ Spunding Valve is purpose-built for pressure fermentation. With exacting precision, you’ll turn out lager-like beer at ale temperatures in no time! Pressurized fermentation is a great option for creating lager-like flavor profiles at room temperature, without the hassle of temperature control. And you’ll complete your fermentations faster and easier. The Blichmann Engineering™ Spunding Valve is purpose built for homebrewers to control your pressures with exacting precision. Research by Blichmann Engineering™ and White Labs shows significant reduction of esters (fruity flavors found in most ales) and low levels of diacetyl, by fermenting under pressure. Key Features: Ferment under pressure to produce clean, low ester, lager-like beers Extremely fine adjustments from 0 to 35 psi, and superb pressure stability Suitable for vessels up to 42 gal (1BBL batch size) Perfect for naturally carbonating your beers Use for counter-pressure transfers Integral blow-off barb fitting adds a visual indication of fermentation if desired NPT model is perfect for the Blichmann Engineering™ Cornical™ Unitank (BL275) Also available in T.C. model (BL152)
$95.49
-
Replacement Pump for BrewZilla | Gen 3 | 220V
Replacement internal pump for 220-240V Gen 3 BrewZillas. Comes with bare wire. KegLand Part Number: KL03834
$87.99
-
Replacement Pump for BrewZilla | Gen 3 | 110V
Replacement internal pump for 110-120V Gen 3 BrewZillas. Comes with bare wire. KegLand Part Number: KL05463
$87.99
-
XpressFill XF4400 | Open Fill | Carbonated Beverage Can Filler | 4 Spout
Suitable for carbonated beverages such as beer and kombucha Purges with CO2 prior to filling Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter Made to order in the United States The XF4400 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner. The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha. The XF4400 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention. The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall. Each bottle filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 600 cans per hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Maximum Can Dimensions: 4" D x 11.5" H Maximum Operating Pressure: 12 psi Weight: 34 lbs Dimensions: 16" wide x 17" high x 15.5" deep Requires 0.7A of 115V 50/60Hz power
$3,995.00
-
XpressFill XF2200 | Open Fill | Carbonated Beverage Can Filler | 2 Spout
Suitable for carbonated beverages such as beer and kombucha Purges with CO2 prior to filling Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter Made to order in the United States The XF2200 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner. The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha. The XF2200 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention. The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall. Each filler is hand built to order in the California factory. Lead times average about 3 weeks. Features & Specifications: 360 cans per hour capacity (12 oz) All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Purges with CO2 prior to filling Includes silicone tubing to fill from bottom Maximum Can Dimensions: 4" D x 11.5" H Maximum Operating Pressure: 12 psi Weight: 22 lbs Dimensions: 12" wide x 17" high x 15.5" deep Requires 0.7A of 115V 50/60Hz power
$2,795.00
-
Godiva® Hops (Pellets)
Godiva® is best used in late additions, and is known for its sweet and smooth bittering characteristics. A daughter of Jester, this hop was selected for its aroma, yield, and resistance to disease. Godiva® displays notes of tangerine, gooseberry, and spice. Hop Statistics Alpha Acids: 6 – 9% Beta Acids: 2 – 3% Alpha-Beta Ratio: 1.1 - 4.5 Cohumulone: (% of alpha acids): 25 – 29% Total Oils in mls per 100 grams dried: 0.4 – 0.8 Similar Hop Varieties: Blanc, Wai-iti Godiva® is a registered trade mark of Charles Faram & Co Limited and is from the Charles Faram Hop Development Programme.
$3.09
-
Idaho Gem™ | Pellet Hops
Idaho Gem™ is a remarkable hop of unknown lineage. It was found by Gooding Farms in Parma, and aptly named after its home state. This treasured dual-purpose hop is loaded with sweet, fruit-forward aromatic oils that make it prime for late kettle and dry hopping additions. Use liberally in Pale Ales, IPA's and NEIPA's. Idaho Gem™ will dazzle you with flavors of pineapple, cherry, and candied fruit, with an herbal and spicy aroma. Hop Statistics Alpha Acids: 12 – 14% Beta Acids: 5 – 7% Alpha-Beta Ratio: 1.7 - 2.8 Cohumulone: (% of alpha acids): 1.3 – 2% Total Oils in mls per 100 grams dried: 40 – 45
$2.19
-
Cashmere Hops (Pellets)
Originally released in 2013, Cashmere was developed by Washington State University as a cross between Cascade and Northern Brewer. With a higher alpha acid content than Cascade, this dual-purpose hop has a smooth bitterness, but really shines as a late addition hop when used at knock out, whirlpool, or dry hopping. Expect an herbal, slightly spicy aroma with notes of lemon, lime, melon and stone fruit. Hop Statistics Alpha Acids: 7.7 – 9.1% Beta Acids: 3.3 – 7.1% Alpha-Beta Ratio: 1.1 - 2.8 Cohumulone: (% of alpha acids): 22 – 24% Total Oils in mls per 100 grams dried: 1.2 – 1.4 Storage (% alpha acids remaining after 6 months storage at 68° F): 75% Similar Hop Varieties: Cascade, Northern Brewer, Amarillo® Amarillo® is a trademark owned by Virgil Gamache Farms, Inc.
$1.99
-
Multihead Hops (Pellets)
Multihead is a neomexicanus breed so named for its tendency to produce dual cones. Low alpha acid levels and high oil content make this hop perfect for packing flavor and aroma into your beer. Known for imparting intense tropical flavors of melon, guava, apricot and citrus. Although primarily used as a late addition, Multihead is known to contribute a mellow, peachy character when added early in the boil. Hop Statistics Alpha Acids: 3.5 – 4.5% Beta Acids: 5.5 – 8% Alpha-Beta Ratio: 0.43 - 0.82 Cohumulone: (% of alpha acids): 45% Total Oils in mls per 100 grams dried: 0.5 – 1.5
$1.99
-
Replacement Butterfly Valve Assembly for FermZilla
Replacement Butterfly Valve Assembly for FermZilla. Fits both 27L & 55L. Kegland Part number: KL11464
$49.49
-
Replacement Graduation Sticker for 55L FermZilla Conical
Replacement Graduation Sticker for 55L FermZilla Conical. Kegland Part number: KL11440
$4.39
-
Replacement Graduation Sticker for 27L FermZilla Conical
Replacement Graduation Sticker for 27L FermZilla Conical. Kegland Part number: KL11433
$4.39
-
Replacement Stainless Stand for FermZilla Conicals
Stainless steel stand for FermZilla Conical fermenter. Fits both 27L and 55L models. Kegland Part number: KL11419
$32.99
-
Replacement Threaded Lid Ring for FermZilla
Replacement Threaded Lid Ring for FermZilla. Fits all models and sizes of FermZilla fermenters. Kegland Part number: KL11396
$9.89
-
Replacement O-Ring for FermZilla Collection Container
Replacement O-Ring for 1,000 mL FermZilla Collection Container. Also compatible with the BrewBuilt Flex Chamber. Kegland Part number: KL11372
$3.29
-
BrewBuilt® IceMaster Glycol Chiller | 100 | Max 4 | Replacement Foot
Replacement foot for the BrewBuilt IceMaster 100 & Max 4.
$3.89
-
Extension Cord for Blichmann 240V Power Controller
11.5 ft. extension cord for Blichmann 240V Power Controller (BL995).
$32.99
-
Extension Cord for Blichmann 120V Power Controller
11.5 ft. extension cord for Blichmann 120V Power Controller (BL994). Note: 240V cord pictured.
$32.99
You have seen 2304 out of 3011 products