Detecting your location...

March Nano Brewery Pump

    Description

    Designed for the small 'Nano' commercial brewery where the March 815 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump.

    *Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.

    Homebrewing Tips:
    1. Great for Whirlpooling 20 gallons of wort or more.
    2. Ideal for our Counterflow Chillers.

    Please note that the pump comes with a three foot cord WITHOUT a plug attached. It has a 16 gauge 3 wire setup.

    Statistics
    Motor: 1/8HP 110v/60Hz Max Flow: 17 G.P.M at zero head
    Max Head: 27 ft. at 1 GPM
    Inlet: 1" FPT
    Outlet: 1/2" MPT


    Materials in Contact with Beer
    Polysulfone
    Stainless Steel
    Buna N
    Ceramic

    March Nano Brewery Pump

      Product form

      SKU: H325

      $543.99

      Calculating shipping time...
      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        WARNING : This product can expose you to chemicals including Lead and lead compounds, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        Designed for the small 'Nano' commercial brewery where the March 815 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump.

        *Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.

        Homebrewing Tips:
        1. Great for Whirlpooling 20 gallons of wort or more.
        2. Ideal for our Counterflow Chillers.

        Please note that the pump comes with a three foot cord WITHOUT a plug attached. It has a 16 gauge 3 wire setup.

        Statistics
        Motor: 1/8HP 110v/60Hz Max Flow: 17 G.P.M at zero head
        Max Head: 27 ft. at 1 GPM
        Inlet: 1" FPT
        Outlet: 1/2" MPT


        Materials in Contact with Beer
        Polysulfone
        Stainless Steel
        Buna N
        Ceramic

        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 10.0 lb

        Recently viewed products

        Customers praised this powerful pump for moving wort efficiently through long distances and HERMS coils. It's "reliable" and handles boiling temperatures well. However, impeller durability issues were noted, with one customer experiencing failures after 2 years. Proper setup is critical: use minimum 3/4" inlet fittings to prevent cavitation.

        Wort (positive)Pump (positive)Chiller (positive)Power (positive)Cavitation (neutral)
        • 5 stars: 4 (80%)
        • 4 stars: 0 (0%)
        • 3 stars: 1 (20%)
        • 2 stars: 0 (0%)
        • 1 star: 0 (0%)
        B
        Bent H.
        Impeller destruction

        I have had this pump a little over two years now and at this point have had to replace the impeller system twice it does not seat well inside the pump head because of this it ends up tearing the thin piece of aluminum that holds the magnet together to shreds. This is something that needs to be fixed or redesigned. Upset and have gone to a different company for my pump needs now.

        B
        Brian T.
        Great Pump BUT be warned

        This is a wonderful pump but be warned. I just got off the phone with one of the engineers at March asking him why my pump kept squealing even though I know for a fact I had no cavitation. He asked some questions and determined that the 1/2" couplers on my kettle were choking the flow to the pump essentially overworking it and that causes the impeller and thrust washer to seize. He recommended a minimum of 3/4" on the inlet side all the way to the kettle including the kettle fittings themselves but that 1" would be even better. Other than that this is a great pump.

        G
        Gabriel O.
        Excellent for my use

        I have a 25 gallon brewhouse that I use this pump for. I can easily throttle it back to use for mashing or I can open it up to whirl pool while circulating through my plate chiller. To prevent cavitation I would recommend a 1" hose for the inlet if you want to open the output valve all the way.

        J
        Joseph M.
        A lot of power packed in a small unit

        This has been one of my most reliable pumps. All March pumps have served me well. They are reliable and can take abuse. I use this pump for my work and chill. It is fast and efficent - able to move the wort a great distance. I never have air-lock issues like I use to on the older model pumps. A great choice if you need the power.

        W
        WaynesWorld
        March nano brewery is indispensible for me

        I use this pump on the wort side of my system. During the mash it works terrific recirculating through my 50 foot HERMS coil inside my HLT. During the boil it works terrific moving the boiling wort through my counterflow chiller to sterilize it and then upon completion of the boil for cooling the wort. I also have the smaller March pump just for the HLT. This smaller pump I fear would not have the power needed to move some of my worts through that HERMS coil. This one has never disappointed me. Futhermore this one is rated for our boiling worts!! A representative of Little Giant told me I would void my warranty using ANY of their pumps with boiling wort!! Hope this helps cheers!!

        A
        Anonymous

        Is this pump too strong for a 10 gallon batch such as for recirculating?

        MoreWine

        It’s pretty strong. I use it on my 55 gallon brew house for cleaning.

        MoreWine

        Yes it would be over-kill for a 10 gal system. I have a 1 BBL system in my brewery and it uses the standard homebrew Chugger pumps for recirculation and HERMS. I use these Nano pumps for CIP and moving water from one vessel to another quickly.

        A
        Anonymous

        can this handle boiling water temperatures?

        MoreWine

        Yes these are intended to handle boiling liquids.

        © 2026 MoreWine

          • American Express
          • Apple Pay
          • Bancontact
          • Diners Club
          • Discover
          • Google Pay
          • iDEAL Wero
          • Mastercard
          • Shop Pay
          • USDC
          • Visa

          Login

          Forgot your password?

          Don't have an account yet?
          Create account