New Products

Produces beers with dominant apricot and peach flavors, complemented by subtle notes of orange and pineapple Multi-Strain Kveik Yeasts are original blends of kveik yeast cultures rather than isolated single-strain yeasts Ferments effectively across a broad spectrum (59-100°F), offering flexibility for various beer styles Achieves complete fermentation in as little as 72 hours at optimal temperatures (88-95°F), speeding up the brewing process Well-suited for a variety of beer styles, including IPA, Pale Ale, NEIPA, Stouts, and Porters Eitrheim multi-strain comes from Reidar Eitrheim in Tokheim. The flavor and aroma primarily derive from apricot and peach, with secondary notes of orange and pineapple. Eitrheim ferments well between 59-100°F and will ferment faster at higher temperatures. At an optimal temperature of 88-95°F, you can expect fermentation to take up to 72 hours. Eitrheim is suitable for IPAs, pale ales, and NEIPAs. The Eitrheim kveik comes from Reidar Eitrheim from Tokheim, Norway. Tokheim is located close to Odda in the heart of the Hardangerfjord and next to the Folgefonna National Park. The yeast has been passed on for generations, and Reidar got it from his grandfather. The yeast is very versatile and can be used in different beer types such as IPA, Pale Ale, NEIPA, Stouts, and Porters. The Multi-Strain Difference Kveik Yeastery's unique multi-strain kveik yeasts capture the true essence of traditional Norwegian farmhouse brewing, delivering a depth of flavor and robust fermentation unmatched by single-strain alternatives. While other suppliers offer isolated kveik strains, Kveik Yeastery is the only source for authentic, dried multi-strain blends, providing brewers with the complex, nuanced profiles that define classic kveik. These diverse blends offer a superior brewing experience, unlocking the full potential of this remarkable yeast. Flavor and Aroma Primary flavors: Apricot and peach Secondary flavors: Orange and pineapple The intensity is medium at high fermentation temperatures, and at lower temperatures, it will be less intense. Fermentation Eitrheim ferments well from 59°F up to 100°F. The higher fermentation temperature, the faster fermentation. At the optimum temperature 88-95°F expect fermentation to finish in 72 hours. When fermentation is done at low temperatures you can expect fermentation time to increase. For high gravity beers, we recommend users to pitch two packs of yeast and add yeast nutrition to ensure a healthy fermentation. Pitching Pitch directly into wort by sprinkling it across the surface, or rehydrate yeast. For fermentation below 64°F, or high gravity, increase pitching rate to 2.25 g/Gal. One 7 g sachet treats 5 to 8 gallons of wort. One 300 g brewery pouch treats 8.5 bbl of wort.   Effective Fermentation Temp: 59-100°F Optimum Fermentation Temp: 88-95°F Flocculation: Medium Alcohol Tolerance: 12% ABV Attenuation: Medium

Read more less

Digital temperature control Triple heating element control (2000w, 1000w and 500w) 17 gallon total capacity 304 stainless steel construction 220V / 20A power This is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 10-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle! The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid. Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun! This DigiBoil model has three built-in heating elements that run off a 220V plug. The elements are 2000w, 1000w and 500w for a combined 3500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage all three elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).  Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired. More! Features: NEMA 6-30R plug (4.5 ft. cord) Heating elements are concealed for easy cleaning 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2") Stamped-in volume markers (gallons & liters) Glass lid Temperature reads in °F or °C With elements turned off, hold both the +/- buttons to switch between °F or °C Compatible with reflux and pot still (DS130 & DS120)* External Dimensions: 29" H x 19.5" W (including handles) Internal Dimensions: 20.25" H x 15.75" W ETL Listed *Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid (DS127). Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States.  It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. MoreBeer! is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).   Kegland Part number: KL07313 NOTE: Due to the size of this item, it is not eligible for international shipping.    

Read more less

Crafted from premium German Barke® barley, delivering a rich malt aroma with subtle toffee undertones Optimal for a wide range of beer styles, including lagers, pilsners, ales, and bocks, enhancing body and flavor Use as up to 100% of your grain bill 1.4 L - Made from the finest German two-row historical summer brewing barley Barke®. The long-loved characteristic malt aroma of Barke® is the perfect base for intensely flavorful bright lager beers. This results in an excellent body and a pronounced full-bodiedness. Barke® has pronounced malt aromas with underlying toffee notes; pleasant, soft mouthfeel Heirloom malt for malt-forward beer styles, typically for: Pale Lager: American (Light) Lager, Munich Helles, Festbier, German Leichtbier, Dortmunder Export, Kellerbier (Pale Kellerbier), India Pale Lager Pilsner: German Pilsner, American Pilsner Amber Lager: Franconian Red Beer Strong Lager: Imperial Pilsner Bock: Light Bock, Dark Bock, Light Doppelbock Pale Ale: British Mild, Belgian Blond Ale, Trappist Single, Session Pale Ale, English Summer Ale IPA: Session IPA Amber Ale: Scottish Light, Heavy and Export Strong Ale: British Strong Ale Wheat Beer: Gose Malt Specification: Color °L - 1.4 - 2.1 Moisture % - max. 5.0 Extract fine % dm - min. 80.5 Protein % dm - max. 9.5 - 11.5 Usage Rate - Up to 100%  

Read more less

Crafted from Chevallier, the historic barley variety favored in Victorian ales, offering a unique depth of flavor Provides warm, cracker, and biscuit aroma with a pronounced malt character, ideal for malt-forward ales Use as up to 100% of your grain bill 2.7 L - Chevallier was the first ever selected landrace for malting and it’s what Crips's founders Fred and George Smith would have malted back in 1870. Chevallier reigned supreme for over 100 years as the dominant barley variety in England from the 1820’s to 1920’s. It was propagated all over the world and was being grown in Australia commercially as recently as 1960. It formed the backbone of many Victorian ales and in its revived form, it's won awards for its depth of flavor. Crisp Chevallier is characterized by warm, cracker and biscuit aroma with a full flavor. Compared to many other modern barleys its aroma and flavor are quite pronounced. Suitable for any malt-forward ale, or where increased malt character is needed to balance a high hop load. Malt Specification: Color °L - 2.7 - 4.0 Moisture % - max. 3.5 Extract fine % dm - min. 80.0 Protein % dm - max. 11.3 Usage Rate - Up to 100%  

Read more less

Fermentable extract rich in sugar, protein and flavor Contributes to haze formation, mouth feel and head retention Ideal for NEIPA, Hazy Pales or adding a velvety mouthfeel to an Oatmeal or Milk Stout Unlock smoother, hazier, and more flavorful beers. Our hydrolyzed oat powder, crafted from premium Australian oats, boosts head retention, enhances mouthfeel, and creates a desirable haze, perfect for NEIPAs and Hazy Pales. Add a velvety touch to stouts or explore new dimensions in your favorite brews. Rich in fermentable sugars and oat flavor, this extract is your secret to exceptional beer. 1 lb bag size coming soon!

Read more less

Counterflow design provides rapid, single-pass wort chilling Larger flow area minimizes hop clogs compared to plate chillers 9.5mm Duotight compatible inlet/outlets allow for quick and easy hose connections Durable PEX tubing resists high temperatures and pressures, extending the chiller's lifespan Tired of slow, inefficient wort chilling? Meet the Red Reaper Counterflow Chiller, your ultimate brewing ally. This isn't just another chiller; it's engineered for speed, durability, and hassle-free brewing. Unleash Rapid Cooling with Superior Design: Robust PEX/Copper Construction: Unlike standard clamped connections, the Red Reaper boasts PEX tubing swaged and soldered directly to the copper wort pipe. This innovative design guarantees a leak-proof, high-pressure connection, ensuring your cooling water stays where it belongs. Lightning-Fast Duotight Compatibility: Seamlessly connect your hoses and camlock fittings in seconds with the 9.5mm Duotight compatibility. Brew more, fuss less. Add the Duotight Push-In Thermowell Tee to add a thermometer to your wort out line. High-Efficiency Counterflow Design: Featuring an internal copper tube for wort circulation and an outer chamber for counterflowing cold water, the Red Reaper maximizes heat transfer for rapid chilling. Experience the power of single-pass cooling from boiling to pitching temperatures. Clog-Resistant Flow: Enjoy the benefits of a plate chiller's efficiency with a larger flow area that minimizes hop clogs. Built for Performance and Longevity: The Red Reaper utilizes the same pressure and temperature-resistant PEX hosing trusted in professional plumbing, offering exceptional flexibility and durability. We recommend recirculating your last 15 minutes of boil through the Red Reaper to sanitize it before chilling with cold water. Easy Cleaning and Maintenance: For optimal cleaning, circulate hot PBW for a minimum 5-minute contact time. Alternate flow direction for thorough cleaning, and rinse with water at the same temperature. Important Care Instructions: Avoid Sunlight: Prolonged exposure to sunlight can degrade the PEX tubing. No Acidic Cleaners: Do not store with StarSan or other acidic products, as they can damage the copper. What is PEX? PEX (cross-linked polyethylene) is a flexible, durable plastic tubing used as a reliable alternative to traditional copper or steel plumbing. Choose Your Fittings: The Red Reaper comes with bare, 3/8" barbs that you can simply clamp your tubing onto. However, we recommend using 9.5mm Duotight x 1/2" male thread adapters which will allow you to convert to your preferred fittings for the water and wort lines -- Camlock, Garden Hose, Tri-Clamp, Quick Disconnect (QD), etc. Specifications: 18.3 ft. Length 3/8" barb inlet/outlet 9.5mm Duotight compatible Rubber feet Hinged hanger (for BrewZilla handles) KegLand Part Number: KL38355  

Read more less

Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest 3 mm ID size is perfect for mobile draft applications where only a short 3.2 ft. beverage line is needed Easily identify your gas and beverage lines with color-coded draft tubing. LightShield Black EVABarrier is recommended for beverage lines while using Transparent Red for your gas lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. LightShield Black also works perfectly for hydroponic systems as it will block UV and discourage algae growth. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 3 mm (5/32") ID size is perfect for mobile draft applications or home draft systems where only a short beverage line is needed. Lengths of 3.2 ft. per line are all that you'll need for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line.  With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized.  EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable.  This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 3 mm (1/8") Outer Diameter - 6.35 mm (1/4") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up   *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42789  

Read more less

Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest 6.3 mm ID size is recommended for long draw beverage lines 20-25 ft. in length Easily identify your gas and beverage lines with color-coded draft tubing. LightShield Black EVABarrier is recommended for beverage lines while using Transparent Red for your gas lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. LightShield Black also works perfectly for hydroponic systems as it will block UV and discourage algae growth. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 6.3 mm (1/4") ID size is recommended to be used as gas line or long draw beverage lines. If you intend to use it as beverage line, we recommend using 20-25 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line.  With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized.  EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable.  This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 6.3 mm (1/4") Outer Diameter - 9.5 mm (3/8") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up   *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42772  

Read more less

Easily identify gas and beverage lines with color-coded options—LightShield Black for beverages, Transparent Red for gas EVABarrier's double-walled design with a proprietary inner polymer significantly reduces oxidation and CO2 loss, keeping your beer fresher for longer The ultra-smooth, nearly impermeable inner surface of the tubing prevents bacteria and microbes from adhering, ensuring cleaner beer lines The stiff yet pliable EVA outer barrier makes the tubing kink-resistant and ideal for use with push-in fittings like Duotight and John Guest 4mm ID size is optimized for home draft systems with short 5-6 ft. draft lines Easily identify your gas and beverage lines with color-coded draft tubing. LightShield Black EVABarrier is recommended for beverage lines while using Transparent Red for your gas lines, saving you a headache when your draft lines inevitably get tangled up in your draft system. LightShield Black also works perfectly for hydroponic systems as it will block UV and discourage algae growth. If you're looking for a high-quality draft tubing to take your system into the 21st century, EVABarrier is the clear choice. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. The 4 mm (5/32") ID size is perfect for homebrew draft applications where only a short beer line is needed. We recommend using 5-6 ft. per line for adequate flow resistance. Outer Barrier The outer barrier is made from EVA material and provides a decent stiffness to the tubing while still remaining pliable. This not only makes EVABarrier extremely kink resistant, it also makes it the best tubing to be used with Duotight, John Guest, and other push-in fittings. Inner Barrier The inner barrier is made from a proprietary polymer that acts as an excellent gas barrier. You can rest assured that your beer will be better protected from oxygen exposure, as well as CO2 loss. Your beer will stay fresher for longer and not loose carbonation like with other draft line.  With other beverage line, you may notice that beer sitting in the line for an extended period will start to taste flat and/or oxidized.  EVA Barrier tubing is unquestionably better in this regard and you will notice a significantly improved freshness of your beer, especially if it's been sitting in the lines for a while. Due to the high density and smooth nature of the EVABarrier inner wall, the internal surface of the tubing is remarkably smooth and almost completely impermeable.  This makes it difficult for bacteria and other microbes to attach to the inside surface of the tubing. Just another way EVABarrier is looking out for you and your beer! Direct Connect to Ball Lock Kegs This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up   *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part Number: KL42765  

Read more less

Compatible with ILTEC Ultrafiller Single or Three-Cartridge Filter Housings Made from stainless steel Available in 5-, 10-, 50-micron sizes Stainless Steel Filter Cartridges for use with the ILTEC Ultrafiller Ultrafiller Single Cartridge or Three-Cartridge Filter Housing.   Polypropylene vs. Stainless Filter Cartridges PP Cartridges: Single-use or limited reuse: Ideal for small batches or when very fine filtration (under 1 micron) is required. More affordable upfront: But cost can accumulate with replacements. Commonly used for wine: Especially for final filtration before bottling. SS Cartridges: Reusable and long-lasting: More sustainable and cost-effective in the long run. Easy to sanitize: Can be boiled or cleaned with various solutions. Preferred by most users: Especially distilleries. Cannot achieve very fine filtration: Not suitable for all winemaking needs. In short, PP cartridges are best for small-batch winemakers needing ultra-fine filtration below 1 micron.  However,  SS cartridges offer a more sustainable and economical solution for most other filtering needs due to their reusability and longevity.  Ultimately, the best choice depends on your specific requirements, including the type and volume of liquid being filtered, desired filtration level, and budget.   Available Sizes: 5 micron 10 micron 50 micron

Read more less

Designed for use with Ultrafiller 4 system Supports filter cartridges from 0.45 to 50 micron for precise filtration across various liquids Effectively filters spirits, EVO oil, beer, wine, and more, ensuring clarity and quality The Ultrafiller Three-Cartridge Filter Holder is perfect for those who need to filter their product before bottling and allows you to use cartridges of various micron ratings in a single pass. The 1" intake tube is compatible with Ultrafiller 4 systems. The wide range of combinable filter cartridges allows you to cover all liquids, from the finest spirits to extra virgin olive oil, beer, wine and more. Filter cartridges are available in sizes ranging from 0.45 to 50 micron in polypropylene or stainless steel.

Read more less

72,000 BTU/hr output ensures fast and efficient heating Supports kettles up to 20 gallons Modular legs allow for 7”, 16”, and 24” operational heights. (24” extensions sold separately.) Features an upgraded stainless steel ring for long-lasting durability and enhanced performance Available while supplies last! The Anvil Forge™ Burner: Powerful, Efficient, and Fast! Experience the ultimate in performance with the Anvil Forge™ Burner. Designed with durability and functionality in mind, this model features an upgraded stainless steel ring for long-lasting durability and enhanced performance. Key Features: Multiple-Height Operation: Patent-pending modular legs allow for 7”, 16”, and 24” operational heights. Perfect for mounting to a bench, draining directly into a carboy, or creating a 2-tier brew system. (24” extensions sold separately.) Rust-Free Precision: Equipped with a precision-cast burner ring upgraded to stainless steel, ensuring rust-free, durable performance. Self-Leveling Feet: Provides rock-solid stability, even on uneven surfaces. High-Powered Heating: 72,000 BTU/hr output ensures fast and efficient heating. Even Heat Distribution: A large burner surface area eliminates hot spots and maximizes efficiency. Integrated Heat Shield: Protects your valve and thermometer from heat damage with a patent-pending design. Weather-Ready Design: A super-deep burner ring excels in windy conditions. Ultra-Durable Coating: Coated with an ultra-high-temperature finish that resists burning and melting—unlike standard paint. High Capacity: Supports kettles up to 20 gallons. Regulator Included: Comes ready to use with a high-quality regulator. Perfect for brewers seeking power, precision, and efficiency, the Anvil Forge™ Burner is a must-have addition to your brewing setup.

Read more less

How frustrating is it when hops cause blockage in your poppet, tap, ball valves and practically everywhere else? This really handy little filter can be used on with the Torpedo Keg Buoy or the floating dip tubes included with the Kegmenter and FermZilla Pressure Kit to prevent hops or other solids from getting sucked into the dip tube itself. The 304 stainless 80 mesh is fine enough to filter out hops and many other solids but not so fine that it gets blocked up easily. If you have a FermZilla or stainless Kegmenter this add is a must. Made from HDPE and 304 Grade stainless steel, this product can be boiled or sanitized in the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleaning. This updated version of the original Filter Attachment now includes a weighted cap that helps keep the end of the dip tube pointed down and submerged below the liquid surface level. KegLand Part Number: KL41485

Read more less

Effortlessly transport your 65L or 100L BrewZilla or 65L DigiBoil with the sturdy rolling flat dolly, designed with precut hole configurations for secure placement Includes two locking wheels to hold your brewing system in place, ideal for cleaning on sloped surfaces or ensuring stability during use Perfect for Lift-N-Lock Pulley systems, enabling seamless movement under pulleys and convenient handling of malt pipes Easily move your BrewZilla or DigiBoil around your brewing area using this rolling flat dolly. The thick reinforced plastic dolly plate comes with two precut hole configurations suitable for 65L & 100L Gen 4 BrewZillas and 65L DigiBoils, allowing the feet of your system to slot into place for easy mobility. Two locking wheels are included so you can lock your brewery in place which can be especially useful if you move the unit to a sloped driveway for cleaning. These dollies are highly recommended if you are using a Lift-N-Lock Pulley type system for your malt pipe. Easily move your system into position under your pulley, and when you're done mashing, pull the malt pipe out, wheel the BrewZilla away, and lower the malt pipe to the ground or into a cleaning tub. This dolly bundle is also the preferred option for 100L BrewZillas and 65L BrewZillas/DigiBoils that use tall bulky distillation heads. Compatible With: 65L BrewZilla Gen 4 100L BrewZilla Gen 4 65L DigiBoil Includes: Reinforced Plastic Dolly Plate 100 mm Castor Wheels (2 locking, 2 non-locking) Mounting Hardware Plate Dimensions: 25.9" Ø x 0.7" Thick (660 mm x 20 mm) BrewZilla sold separately KegLand Part Number: KB15697 NOTE: Due to the feet placement, the dolly plate is not suitable for the 35L BrewZilla or 35L DigiBoil.  

Read more less

Brite Light offers the same tank body as the standard Brewtools Brite Tank with a slight difference in included accessories for a more affordable price Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brite Light is the same tank body as the standard Brewtools Brite Tank, but with a different pressure relief valve and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Brite Light can be upgraded to a standard brite tank where you prefer. Key Differences: CleanCore butterfly valve made from Polyketone Barbed blow-off PRV Can be set to open for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Does not include neoprene insulation jacket Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 39.3" Packaging size: 36.2" (h) x 19.6" (w) x 19.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 21.3 gallons Max rec. volume: 19.8 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The Light version of the tank does not include the insulation jacket, and has the Brewtools CleanCore butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Brite Light offers the same tank body as the standard Brewtools Brite Tank with a slight difference in included accessories for a more affordable price Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brite Light is the same tank body as the standard Brewtools Brite Tank, but with a different pressure relief valve and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Brite Light can be upgraded to a standard brite tank where you prefer. Key Differences: CleanCore butterfly valve made from Polyketone Barbed blow-off PRV Can be set to open for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Does not include neoprene insulation jacket Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 28.3" (72 cm) Packaging size: 25.1" (h) x 19.6" (w) x 19.6" (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 12.1 gallons Max rec. volume: 10.5 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The Light version of the tank does not include the insulation jacket, and has the Brewtools CleanCore butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 55.5" Packaging size: 52.3" (h) x 28.3" (w) x 28.3" (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 23.6" Ø Gross volume: 79.2 gallons Max rec. volume: 72.6 gallons Min rec. volume: 18.4 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com Please Note: Example photo of Brite 150 model shown.

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 44.8" Packaging size: 42.5" (h) x 23.6" (w) x 23.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 19.6" Ø Gross volume: 40.6 gallons Max rec. volume: 36.9 gallons Min rec. volume: 11.8 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 39.3" Packaging size: 36.2" (h) x 19.6" (w) x 19.6 (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 21.3 gallons Max rec. volume: 19.8 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely carbonate and pressure transfer finished beer to kegs with virtually no oxygen pickup All valves, fittings, and gaskets come included Brewtools Brite Tanks are storage, packaging, and finishing tanks made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation. Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral. Many options for connecting accessories like sensors, carb. stones and other accessories. Pressure rated for 2 bar / 30 PSI. 8" TC port on top for easy access. 2" TC dump valve 3x 1.5" DN32 ports (1 on the back) + 1x TC34mm port for sample valve Brewtools Brite Tanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Height without accessories: 28.3" (72 cm) Packaging size: 25.1" (h) x 19.6" (w) x 19.6" (d) Net weight: TBD Gross weight: TBD Tank diameter (inside): 15.7" Ø Gross volume: 12.1 gallons Max rec. volume: 10.5 gallons Min rec. volume: 5.2 gallons Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI   The tank comes with insulation jacket, stainless steel butterfly valve and the necessary piping and clamps/gaskets. For more detailed information and user manual, please visit docs.brewtools.com

Read more less

Standard D-Style keg coupler works with virtually all American-made commercial beer sanke kegs Durable stainless steel construction ensures longevity and corrosion resistance for both the coupler body and keg probe Easy pull-style lever handle simplifies keg connection and disconnection for user convenience Includes 3/8" OD barb for gas inlet The KOMOS D-Style Keg Coupler is your reliable choice for dispensing standard American sanke kegs. Enjoy the peace of mind that comes with a robust, stainless steel construction, including the coupler body and keg probe, ensuring lasting durability and resistance to corrosion. The D-Style beer tap is the most commonly-used keg coupler in the U.S. The intuitive pull-to-engage lever handle makes connecting and disconnecting a breeze. An included 3/8" OD barb simplifies gas inlet setup, and the built-in pressure relief valve adds a layer of safety. This D-style coupler, the industry standard, is compatible with virtually all American-made commercial draft beer sanke kegs. The upgrade to 304 stainless steel from nickel-plated options provides a significant increase in lifespan, ensuring years of use. For a complete setup, tail piece, hex nut, and gasket for the beer outlet are sold separately and are available in a variety of sizes and styles.  

Read more less

34mm Tri-Clamp Cross. ID: 19mm OD: 21.8mm Length: 60mm

Read more less

34mm Tri-Clamp Tee. ID: 19.2mm (DN20) OD: 21.9mm Length: 60mm

Read more less