Pro Tank Parts & Accessories

1.5" tri-clamp pressure relief valve. Calibrated to blow off at 1.5 BAR or 21.75 PSI.

Read more less

Replacement 2.5" DIN gasket for MB conical fermenters and brite tanks. Material: FKM

Read more less

Replacement 2" tri-clamp gasket for MB conical fermenters and brite tanks. Material: Silicone

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits 5 bbl and above.  Material: Silicone

Read more less

Replacement teflon pads for manway lid crossbar. 2 pcs.  

Read more less

Clean and sanitize two full size kegs per 5-minute cycle Fully automated PLC controller executes every step of the cleaning, rinsing, and sanitizing process Optional hookup for steam cleaning Preset programs 1/2 bbl, 1/4 bbl and 1/6 bbl sanke kegs This fully automated keg washer will efficiently wash two kegs simultaneously, enhancing productivity and streamlining your brewing operations. The Keg Washer has two reservoirs, one is heated for caustic and the other holds sanitizer to ensure a thorough and effective cleaning process. All steps are easily configurable in the computer control unit. Those seeking an extra level of sanitization, this system comes equipped with an option to use steam for an extra level of sanitization. Features: Washes two kegs simultaneously (~5 min per cycle for 1/2 bbl kegs) 21-gallon heated Caustic reservoir 21-gallon sanitizer reservoir Size Optional steam hook up Uses compressed air to empty kegs Stainless construction Water resistant enclosures Preprogrammed Siemens PLC controller (preset for 1/2 bbl, 1/4 bbl and 1/6 bbl kegs) Easily reconfigured for custom applications 6kw heating element in the caustic reservoir. Dimensions: 43.3" L x 29.5" D x 48.3" H With Kegs Installed: 43.3" L x 40.1" D x 57" H Keg Loading Height: 35" Shipping Dimensions: 48" x L 33" W x 56" H Hook Ups: 208/220V Single Phase electrical Compressed Air CO2 Water  

Read more less

1.5" T.C. carbonation stone for 1 & 2 bbl MB Pro conical fermenters and brite tanks. Specifications: 2 micron Overall Length: 7" Single-piece design Made from Stainless Steel

Read more less

This hop port cover is intended for use with MB conical fermenters. Features a welded hook on the underside to hang bagged flavoring additions and a welded handle on top for easy removal. Made from 304 stainless steel.

Read more less

Replacement gasket for the manway on MB conical fermenters and brite tanks. Fits all 3.5 bbl tanks. Material: Viton

Read more less

Replacement pipe clamp for MB conicals and brite tanks. The pipe clamp holds the dump port outlet pipe steady. Intended to be welded in place on the tank legs supporting cross bar.  

Read more less

Replacement foot pad for MB conicals and brite tanks sized from 20 bbl and up.  

Read more less

Replacement foot pad for MB conicals and brite tanks sized from 10 to 15 bbl.  

Read more less

Replacement tank manway locking handle for 3.5 bbl MB Conical Unitank Fermenter. Please Note: This replacement part is intended for unitanks produced after 2021. The diameter of the threads are M18.

Read more less

Replacement tank manway arm for MB 3.5 bbl conical fermenter.

Read more less

This clever device allows you to back fill your tank with an inert gas while cold crashing to avoid the ingress of O2 through the vacuum relief. It is normally used on a tee with a normal PRV/Vacuum Breaker. The NPT port is hooked up to a regulator and set to a low pressure. The exact setting used will depend on the volume of your head space and your regulator. Start at 2 PSI and adjust from there. A pin spanner is required for disassembly. 1.5" tri-clamp 1/2" female NPT port    

Read more less

Replacement EPDM gasket for the 1 BAR PRV featured on MB conicals and brite tanks - CON4P7.

Read more less

Our yeast brinks give you a 1" passage to the bottom of a keg to make moving even the thickest yeasts a breeze. There is an adjustable PRV in case you need to lower the pressure for long term storage. The 4" TC welded to the top makes inspection and cleaning a breeze. The dip tube is about an inch off the bottom to help keep non-yeast solids that separate from your repitch. 1 bbl is perfect for up to a 20 bbl batch with most yeasts. Also available in 1/4 bbl size for up to 5 bbl batches and 1/2 bbl size for up to 10 bbl batches. Pro tip: If you align one valve handle 90 degrees to the other you won't forget which side is IN or OUT. If you do forget, with the PRV on the back side, the left side is the IN and the right side is the OUT. You may also want a keg cart. This brink is the same diameter as a keg but twice the height.  

Read more less

Replacement Viton gasket for the 1 BAR PRV featured on MB conicals and brite tanks - CON4P7.

Read more less

Replacement Foot Pad for MB 1 & 2 BBL Conical and Brite Tanks. M16x2mm threads.  

Read more less

Replacement dome port tri-clamp for MB 2 bbl conicals & brite tanks.  

Read more less

Replacement dome port tri-clamp for MB 1 bbl conicals & brite tanks.  

Read more less

2.5" DIN wrench for MB conical fermenters and brite tanks.  

Read more less