These work great. There are 2 things you need to know. 1) They are a bit short for normal operations unless it's specifically keg-to-keg. Double the length would be about right for closed transfers. 2) These are black to black (Beer out to Beer out). The have flared fittings though so can be swapped out easily. That's pretty much it! If you're looking for an alternative / custom setup I'd recommend checking out Duotight fittings / connectors and some EvaBarrier tubing. For an out-of-the-box keg to keg solution these are great!

It's ok but not long enough should offer it in multiple lengths.

This jumper is great. I sanitized 3 kegs using the same amount of solution as it took for one. It is not a fast process but it is effective.

Legit. Worked well. I put it between two torpedo legs and did a closed keg transfer.

the tubing could have been another foot longer but all the necessary pieces were included

Worked perfectly to transfer from my secondary keg to the serving keg. I started slow (3psi) but got impatient and turned it up to 7 psi for a faster transfer. Easy to use easy to clean and an excellent way to prevent oxygenation of my beer.

Could be a little longer

took a stab at close loop transferring a beer this weekend and this piece of kit was key!

I recently started fermenting in 5G Corney kegs and this is great for transferring from primary to the serving keg. I like the short tube so not as much beer is left in the line. I also have a longer set-up for transferring from one chest freezer to another. They each have their place. This one is great because it has the couplings so cleanup and sanitizing is simple.

Cheaper ball lock connectors than I am used to using. Has a plastic pin to push down poppit valve. Seems to restrict flow a bit more than the other connectors I am using. However that being said it dows what is says. For the price it needs to have better connectors.

Able to easily transfer beer from one keg to another without exposing the beer to anymore O2 than necessary. Love it.

I enjoy using this especially when I have the same size corny kegs. Makes transferring beer a snap. I really enjoy this product since I am transferring all the time. I like to hook up multiple kegs together and run cleaner through them.

This number line does the job good for running beer between kegs. I use it mainly to offload 5 gal corny to 2.5 gal corny. The only complaint I have (thereby missing the 5 star is that the tube could be just slightly longer so that I can go from 5 gal to 2.5 gal keg.

This product makes transfering beer or sanitizer from one keg to another very easy. Also the flair fittings make it easy to clean.

The jumper is pretty short and sometime this is a good thing but I usually find my self just attaching a longer hose for most transfers. As someone else mentioned the shorter length does make it harder to use with different height size kegs. I also prefer a longer hose when transferring from a keg that is in a refrigerator and I don't want to lift it and disturb anything that has settled out.

Could be slightly longer to support transfer from 5G to 2.5G kegs without holding the keg the whole time. Great value if already needing to pick up a set of flare ball lock fittings.

I agree with the other review about adding a foot to the length to make it more versatile. It really does make transferring from my 5 gallon when it I'd running low to my 2.5 corny a breeze. Good to sanitize multiple kegs at once

This jumper line is useful for closed transfers of beer between kegs. The flare fitting on the quick disconnects make it easy to clean out the line when done. I have also used this to fill 2 liter bottles with carbonator caps. Simply squeeze all of the air out of the 2 liter bottle and screw on the carbonator cap. Replace one of the black quick disconnects on the jumper line with a grey (gas) disconnect. Attach black disconnect to keg grey to carbonator cap and fill the bottle!

This makes transferring cleaners or sanitizers a breeze from one keg to the next. Very handy for "chaining" kegs together when cleaning numerous kegs. Also great that it runs through both beverage out tubes to thoroughly clean the keg.

I use this for transferring beer from a 5 gal keg to a 2.5 gal keg and for transferring sanitizer between kegs. Since the 2.5 gal keg is shorter the jumper line is too short and I had to place the shorter keg on a stool. I have since replaced the tubing with a 3 foot section. This product would be much more versatile (at a negligibly higher cost) if the line was a foot longer.