Detecting your location...
Best Sellers - Last 30 Days

Milwaukee MW600 PRO Portable Dissolved Oxygen Meter

    Description

    The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.

    The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.

    Design Features

    • Fast, easy-to-read results with large digital LCD readout.
    • Repeatable, accuracy to ±1.5% FS.
    • Lightweight and portable.
    • Simple 2 point open air calibration (see video below).
    • Uses MA840 reinforced polarographic probe (ABS plastic construction), with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor MA841.
    • 5 o-rings, membranes and one protective cap included.
    • Electrolyte Solution MA9071.
    • 10 feet probe cable for extra flexibility when testing
    • 70 hours of battery life with continuous use (battery included) with low battery warning

    Care and Use
    “Open Air” Calibration Procedure

    1. Remove the membrane
    Take the membrane off the end of the probe and dry the diode off.

    2. Zero out the display
    Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.

    3. Fill the membrane
    Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)

    4. Attach the membrane
    Screw the membrane on to the probe.

    5. Let stablize
    Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes)

    6. Adjust
    Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100.

    You are now calibrated.

    Extra tips

    • Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.
    • Always use fresh electrolyte solution (MA9071).

     

    Milwaukee MW600 PRO Portable Dissolved Oxygen Meter

      Product form

      SKU: MT8104

      $328.90

      Shipping
      Free Shipping*
      Shipping
      Paid Shipping
      Drop Ship
      Drop Ship
      Discount Exclusion
      Discount Exclusion
      Freight
      Freight Only
      Pre-book
      Pre Order

        WARNING : This product can expose you to chemicals including Lead, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.

        Description

        The Milwaukee MW600 PRO Portable Dissolved Oxygen meter is one of Milwaukee's most popular meters with its reliable and fast operation as well as its accuracy.

        The Milwaukee PRO DO Meter is preferred by people looking for lab level accuracy without the cost. The Milwaukee DO Meter is popular with everyone from field biologists and educators to fish farmers and koi pond owners.

        Design Features

        • Fast, easy-to-read results with large digital LCD readout.
        • Repeatable, accuracy to ±1.5% FS.
        • Lightweight and portable.
        • Simple 2 point open air calibration (see video below).
        • Uses MA840 reinforced polarographic probe (ABS plastic construction), with an oxygen-permeable polytetrafluroethylene (PTFE) membrane sensor MA841.
        • 5 o-rings, membranes and one protective cap included.
        • Electrolyte Solution MA9071.
        • 10 feet probe cable for extra flexibility when testing
        • 70 hours of battery life with continuous use (battery included) with low battery warning

        Care and Use
        “Open Air” Calibration Procedure

        1. Remove the membrane
        Take the membrane off the end of the probe and dry the diode off.

        2. Zero out the display
        Connect the probe to the base unit and turn the unit on. Your display should read 0.0. If it does not, go to the position “0” screw on the front of the unit with the screw driver provided and through the access hole make the unit display read 0.0.

        3. Fill the membrane
        Go to the membrane and put the “O” ring inside the membrane on the shoulder at the base of the threads. Fill the membrane to just short of the “O” ring with MA9071 electrolyte solution. Be sure that there are no bubbles inside the membrane. (Air bubbles are the main cause of calibration failure)

        4. Attach the membrane
        Screw the membrane on to the probe.

        5. Let stablize
        Turn the meter on and hang the probe off the end of a table pointing down and let the unit display stabilize (this may take 5 to 15 minutes)

        6. Adjust
        Push down and hold the “Cal” button on the front face of the meter and with the screwdriver go to the front Cal position “100%” and make the display read 100.

        You are now calibrated.

        Extra tips

        • Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.
        • Always use fresh electrolyte solution (MA9071).

         

        Documents
        ISTMW600_11_20
        Important Warnings & Shipping Info +
        Shipping Icon
        Free Shipping: Fast & Free Shipping over $79
        Shipping Icon
        Shipping Rates Apply: Bulk items like grain, bottles, and malt are excluded from our free shipping promotion due to their weight, and often dropship items. Standard shipping rates apply and are calculated at checkout based on your location and order size.
        Drop Ship Icon
        Drop Ship: This product will ship directly from the supplier. Delivery may take 1-4 weeks depending on the vendor.
        Discount Exclusion Icon
        Discount Exclusion: This item is not eligible for sitewide price reductions or percentage discounts.
        Freight Icon
        Freight Shipping: This item ships freight only.
        Pre-book Icon
        Pre Order: This item is available for Pre-Order. Full payment is required to reserve stock.
        Shipping Weight: 7.5 lb

        Recently viewed products

        © 2026 MoreWine

          • American Express
          • Apple Pay
          • Bancontact
          • Diners Club
          • Discover
          • Google Pay
          • iDEAL Wero
          • Mastercard
          • Shop Pay
          • USDC
          • Visa

          Login

          Forgot your password?

          Don't have an account yet?
          Create account