Search results for "co2 adapter pressure gauge"

The Super Sucker transfer pump is the quickest, most hassle-free solution to transfer your wine between vessels. Rack from primary fermenter to secondary or from secondary fermenter to bottling bucket or bottle filler reservoir, and do it without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold beverage. With the Super Sucker you don't need gravity or CO2 pressure to move liquid around. Thanks to the pump's considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving vessel side-by-side or even above the fermenter on a countertop. The 10 mm barbed inlet and outlet are perfect for use with 3/8" ID tubing. We recommend using our Racking Cane Siphon Kit plus 5 ft. of 3/8" vinyl tubing. Secure pump connections with butterfly hose clamps for easy set up and break down. Features: Self-Priming 10 mm Barbed Inlet/Outlet On/Off Switch Max Flow: 1.12 Gal/min Suction: 5 in. Max Lift: 150 in. (12.5 ft.) Maximum Temperature: 140°F Pressure: 90 psi Voltage: 12V DC (3.5A)  

Read more less

Connect EVABarrier tubing to 1/2" male threads with this Duotight adapter. Compatible with EVABarrier 8 mm OD Tubing. Duotight fittings are high-quality push-in fittings that seal tight and offer superior sealing capacity due to the double O-ring sealing design. High Performance Double O-Ring Design: The secret to Duotight's superior sealing performance comes from the fact that they use not one, but two high-quality EPDM O-rings. The double O-ring means they have literally twice the sealing surface when compared with other push-in fittings. This makes them more reliable and significantly reduces the chance of leakage. The double O-ring system also means that tubing can be bent at a much tighter radius without causing leaking issues, which can be an issue with other fittings. This combination of factors makes Duotight the most reliable push-in fittings on the market. EPDM offers excellent chemical resistance for a longer life span. When compared with silicone and vinyl, EPDM has much better gas transmission rates, better wear resistance, and is BPA-free. No Clamps Necessary! We recommend cutting your tubing straight, not on an angle, to ensure the line forms a complete seal. To remove the fitting simply push in the collet and the hose can be removed. Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL39819  

Read more less

Food grade CO2 cartridges provide the purest and most healthy experience in all carbonated beverage applications. It is widely known that not all CO2 cartridges are created equal and that as beverage enthusiasts we should never charge our pressurized growlers with cartridges meant for industrial or sporting activities. Non food safe labeled cartridges can contain unhealthy byproducts or contaminates that may alter both the quality of your beverage experience and its safety. Using food grade CO2 cartridges made from only the purest naturally derived CO2 gas can guarantee the safest and most authentic experience. At over 99.9% pure, Craft Master CO2 cartridges are the healthiest choice for the freshest tasting beer and beverages. Sold in Color Box of 6 cartridges and compatible with our 16 gram CO2 cartridge holder. Additional information Weight: 12 oz Dimensions: 2.75 × 1.5 × 13 in Size: 16 gram – non-threaded    

Read more less

The KOMOS Double-Wide Kegerator has the largest interior capacity of any home kegerator on the market. With an extra wide design, this unit can hold up to eight 5-gallon Slimline Torpedo Kegs or Pepsi-style Ball Lock Kegs. This version does not include a tower kit. Great as a fermenation refrigerator or as a unit that can be built-in when adequate ventilation is an option. Approximately 2-3" of space on each side of the kegerator is required to allow the unit enough air. The tower is then mounted to the countertop and often a pvc collar or foam insulation is placed between the kegerator and the counter. This can also be done with any of our regular kegerators by removing the tower from the unit and mounting it on the counter. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment, however unlikely since these units require freight shipping. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Trays Aluminum floor for additional keg support Rolling casters You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny Specifications: 35.4" wide 27.8" deep 34.3" with CO2 mount 33" Tall (fridge only) 35.5" with Caster wheels 110V - 50 hz 0.9 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 31.6" wide 20.4" deep 17.1" on the left side where the compressor sits 28.3" tall What Fits: 5 Gal. Torpedo Keg - 6 5 Gal. Slimline Torpedo Keg - 8 6 Gal. Torpedo Keg - 6 5 Gal. Megamouth Torpedo Keg - 3 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8 5.2 Gal. Oxebar PET Keg - 6 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 2 See below for the Kegerator Instruction Manual.   Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.  

Read more less

Universal Filling: Ergonomic trigger design allows you to fill bottles of any shape or depth without extra attachments. Oxidation Protection: Integrated CO2 purge clears oxygen before filling to maximize shelf life and freshness. Instant Setup: Tool-free Duotight push-connect fittings provide a fast, leak-free assembly and teardown. Pure Flavor Path: High-grade stainless steel construction ensures zero off-flavors and effortless cleaning. Take Your Draft Anywhere: The Duotight Handheld Bottle Filler Stop leaving your best brews behind. Whether you’re heading to a tailgate, a beach bonfire, or a bottle share, the Duotight Handheld Bottle Filler is the ultimate tool for transitioning your kegged beer into portable bottles without sacrificing quality. Why Choose the Handheld Filler? Precision-engineered for the modern homebrewer, this unit ensures that every drop of beer only touches high-grade stainless steel. This keeps your flavors pure and your cleaning process simple. To ensure your beer stays as fresh in the bottle as it was in the keg, the integrated CO2 purge clears out oxygen before you fill, significantly extending the shelf life of your bottled creations. Faster Setup with Duotight Technology Gone are the days of wrestling with barb fittings and hose clamps. This updated model comes standard with Duotight push-connect fittings, making assembly and teardown incredibly fast and leak-free. The system is designed for brewers who value their time as much as their beer. Versatile & Ergonomic Design The filler's intuitive trigger system and ergonomic handle make high-volume bottling fatigue-free. Unlike counter-pressure fillers that require a specific stopper seal, this gun allows you to fill bottles of any depth or shape without needing extra stems or messy hose extensions. Key Features: Oxidation Control: Built-in CO2 jacketing tube purges bottles for professional-level shelf stability. Universal Compatibility: Fill growlers, bombers, or standard 12oz bottles with ease. Tool-Free Assembly: Duotight fittings provide a secure, airtight seal that snaps together in seconds. All-Stainless Path: Ensures no off-flavors and maximum durability. What’s in the Box: Bottle Filler Includes gas/liquid triggers and a protective silicone tip Red Gas Carbonation Cap w/ 6.35mm Male Duotight stem for quick gas line attachment Duotight Fitting: 1/4" Male Thread x 6.35mm Duotight Elbow: 6.35mm Compression x 8mm female. Duotight Ball Lock Disconnect: 8mm Duotight x Yellow/Black liquid QD EVABarrier Tubing: 5 ft. length (4mm ID x 8mm OD) for low-foaming transfers

Read more less

Unitank Light offers the same tank body as the standard Brewtools Unitank with a slight difference in included accessories for a more affordable price Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Unitank Light is the same tank body as the standard Brewtools Unitank, but with slightly less equipment and some parts made from Polyketone (POK), which vastly reduces cost without compromising the user experience for smaller tanks. Unitank Light can be upgraded to a standard Unitank where you prefer. Key Differences: CleanCore butterfly valves made from Polyketone Barbed blow-off PRV Can be set to open during fermentation for blow-off Also acts as 2 bar / 30 psi safety valve Pushfit sample valve Compatible with optional Push-fit Coil and Adapter Polyketone 8” to 3” tri-clamp lid adapter replaces stainless steel adapter Polyketone racking arm replaces stainless steel racking arm Does not include neoprene insulation jacket, ss blow-off tube or ss blow-off valve Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 73 lbs Gross weight: 88 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI Min. pH: 4.0 In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs CleanCore Butterfly-valve, 2" 1 pcs Racking arm 2", POK 1 pcs TC elbow 90°, 2" 1 pcs Sample valve, 34mm, POK 1 pcs TC Adapter 8"-3", POK 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 4 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 9 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm pull-type PRV/Safety valve with 7mm barb 1.5m (4.9') Silicone tube 6x10mm Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Carb. stone kit with Ball-Lock, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, 2" sight glass etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

Just like our popular D1000 but with enough hardware to allow for two kegs to be tapped at the same time. Kit includes: Aluminum CO2 tank (new) Dual gauge regulator Two Faucets(SS lever),knobs and shanks Stainless steel drip pan Two Sanke keg valve taps All hoses, clamps and instructions Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm freezer then plug the unit in with the lid open. You should be able to see the lines form condensation on the inside of the freezer where there are lines running. Please still use caution when drilling.

Read more less

Premium Counter-Pressure Bottle filler that is designed for the smaller craft brewer or dedicated homebrewer to help make bottling day faster and more efficient The four separate filling heads have individual Stainless Steel 3-way control valves that allow for quick fill rates Only requires one person to operate A single PRV provides equal backpressure on all heads resulting in matching flow rates without adjustment Individual purge valves on each fill head allow for nearly all oxygen removal in a bottle, ensuring that the beer stays fresh for longer The removable drip tray is fully draining with a barbed outlet for constant filling and easy cleaning A purge valve on the reservoir helps make sure that foam never builds up 304 Stainless Steel Construction and easy-to-use functionality, all resulting in a top-of-the-line bottle filler Introducing the newly redesigned and updated G2 Medusa Multihead Counter Pressure Bottle Filler!  This unique unit was designed in-house by the MB Pro Engineering team and purpose built for the smaller craft brewer or dedicated homebrewer.  The Medusa will speed up bottling day while also reducing exposure to oxygen during the bottling process, resulting in higher quality beer with a longer shelf life.   The Medusa Multihead Counter Pressure Bottle Filler can be adjusted to cater all bottling needs.  All four heads can be operated individually, and the height, back pressure, and fill speeds can be adjusted for various bottle styles.  We've done our best to pack this unit with features that will handle all jobs, while keeping costs as low as possible.  Features: 3-way stainless steel valves on both inlet & back pressure sides of all fill heads. Improved Pressure Relief Valve has higher accuracy over fill rates, and directs foam into the drip tray rather than onto your bottles. Robust stainless steel frame stands on its own or can be easily bolted or clamped to a work surface Stainless steel fill reservoir keeps fill rates equal & reduces foaming Inverted fill tubes & reservoir purge means cleaner filling with even less possibility for foam. Dual TC Fill reservoir is easier to clean & allows for upgrades down the road (as they become available). Easily adaptable to fill from nearly any pressurized vessel. Height is adjustable from shorty bottles to growlers.  Easy disassembly for cleaning, storage & maintenance,  Sanitary 1.5" TC inlet for beer (Clamp and Gasket sold separately)  3/8" tube connection for CO2. Backpressure Bar allows for a single adjustment point for fill rates. No more adjusting PRVs on each fill head. Minimum Bottle Height: 6.9" Maximum Bottle Height: 16.5" Maximum Working Pressure: 15 PSI Dimensions:  Footprint: 26-3/8" L x 8" W Drip Tray: 23-1/2" L x 5-1/2" W Overall Height: 25-3/8"   Please Note: Filler valves include a Teflon gasket. Do not soak the valves in PBW which can corrode Teflon material after prolonged contact.

Read more less

The push-fit sample valve coil reduces foam when drawings samples from a pressurized tank. Made for use with the sample valve included with the Brewtools Unitank Light. You will also need the JG Push-fit Adapter to connect to the sample valve. Outside diameter: 4mm Designed for 4mm pushfit.

Read more less

What makes KOMOS Double-Wide Kegerator better than the rest? Designed to hold up to EIGHT 5-gallon Slimline Torpedo homebrew kegs Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Faucets mount to a high-quality stainless steel tower, rather than cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted Faucets sold separately Some people say that one kegerator just isn't enough—but those people never met the KOMOS Double-Wide Kegerator. With a stunning 8-keg capacity and double-tower configuration, this beast of a home kegerator can house enough beer to satisfy even the thirstiest brewers. Please note: this Double-Wide Kegerator with Stainless Double T Bar Tower package does not come with faucets as standard. Select one of the recommended options below to add faucets to your order, or purchase your preferred faucets separately.The included tower shanks are not compatible with Perlick Flow Control faucets. The KOMOS Double-Wide Kegerator offers the same stunning set of features that clearly separate the standard model as the most modern kegerator on the market. With more interior space than any other home kegerator model, the KOMOS Double-Wide Kegerator is designed to fit up to eight 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26-82°F, dual gas inlets at the back, stainless steel internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS Double-Wide and other kegerators is definitely the capacity. With an extra wide interior and double tower configuration, this is likely the only home kegerator you'll find that can hold up to eight 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Many kegerators only have one inlet that is only wide enough for a single line to pass through. Both inlets on the back of the KOMOS unit are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE133) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the towers to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines. We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip trays couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Feature Summary: Stainless Steel Air Cooled Double T Bar Tower Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Trays Stainless Steel Floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x 12m roll Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Detailed instructions on assembly and use Specifications: 35.4" wide 27.8" deep 34.3" with CO2 mount 33" Tall (fridge only) 35.5" with Caster wheels 49.25" with tower 51.5" with Casters and Tower 110V - 50 hz 0.9 Amp draw Optimal ambient temperature is 65°F - 80°F Internal Dimensions: 31.6" wide 20.4" deep 17.1" on the left side where the compressor sits 28.3" tall What Fits: 5 Gal. Torpedo Keg - 6 5 Gal. Slimline Torpedo Keg - 8 6 Gal. Torpedo Keg - 6 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 6 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 8 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 6 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 2 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 3 15.5 Gal. Half Barrel Keg (Full Size Keg) - 2 See below for the Kegerator Instruction Manual. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.  

Read more less

The Craft Master integrated CO2 regulated growler cap is the premier way of keeping your beverages fresh and carbonated in one of our luxury pressurized growlers! Each regulator cap features a smooth CO2 regulating knob, color coded PSI pressure gauge, safety valve, and a zipper tab for easy pressure release. Designed exclusively for the Craft Master line of growlers each heavy duty regulator cap is crafted to the highest specification out of the finest food grade materials and designed for long lasting durability. Cleaning the cap is easy, simply give it a thorough rinse with hot water. Both the cartridge holder and the cap itself are designed to create a perfect air tight seal on your growler without the need for excessive tightening (hand tight only). This secure seal will keep your beer and beverages fresh for days or even weeks (we recommend emptying the container within two weeks). We should also note that each cap will gladly accept either of our 8 gram or 16 gram food grade CO2 cartridges and comes complete with both sized holders.  

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. The KOMOS Stout & Cold Brew Coffee Kegerator comes with NukaTap faucets with Stout Spout attachments to give your beverage an extra creamy pour. Every unit also comes with an adapter to use the included KOMOS CO2 regulator with a Nitrogen gas cylinder. For each faucet, you will also receive the standard faucet spout so you can mix and match your taps and use some for Stout or Cold Brew and some for serving beer, soda, or other beverages. Serving with Nitrogen Nitrogen cylinders can be filled with either pure nitrogen or "Beer Gas", which is a blend of Nitrogen and CO2. Pure nitrogen is recommended for serving cold brew coffee in order to avoid the effects of carbonation. Carbonic acid dissolving into solution will change the mouthfeel of your cold brew and heighten the acidity and bitterness. Stouts, on the other hand, are commonly served with a mix of Nitrogen and CO2, and will give your pours that signature Guinness-like cascade of bubbles as CO2 is knocked out of solution when it passes through the stout spout's aerator disc. Beer gas can also be used to serve other styles of beer, or you can feed a pure CO2 line into the kegerator from a separate CO2 tank. Please note that the kegerator only includes one regulator and does not include a nitrogen cylinder. An empty nitrogen tank can be added to your order above. If you plan to use two different types of gas, you will need to purchase a second regulator and gas cylinder. NukaTap Forward Sealing Faucets NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. KOMOS Kegerator The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive NukaTap stainless steel faucets, the newest in forward-sealing faucet design. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs.   Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. The previous model had one inlet that was only wide enough for a single line to pass through. Now both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines.   Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines.   Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice.   NukaTap Stainless Faucets and Towers All kegerators come with either NukaTap faucets for mounting on the stainless tower. NukaTap is the newest brand of forward sealing faucets that boast a lower thermal mass for reduced first pour foam. They feature a "nuke-shaped" internal shuttle that is made from TPV, which provides superior laminar flow to further reduce foaming issues. If you prefer all stainless steel components in your beer faucet, we would suggest the kegerator configuration that comes with Intertap faucets. All faucet spout attachments and accessories are cross compatible between Intertap and NukaTap. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. The modular, threaded spout can fit a variety of attachments including a growler filler or stout spout. This model includes the all stainless faucet which we think is a must have upgrade over chrome plated brass.   Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line.   EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing.   KOMOS Regulator The included high quality KOMOS regulator maintains consistent pressure. The regulator includes a blow-off PRV with pull ring for safety and relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line.   Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China.   The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed.   Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Stainless Steel Forward-Sealing Faucets (choose number of taps above) Stout Spouts and Standard Spouts for each faucet Robust KOMOS Dual Gauge CO2 Regulator with included Nitrogen tank adapter Stainless Steel Air Cooled Tower Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.   Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.      

Read more less

Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. This version of the FCS Kit includes the Density/Temp Sensor which replaces the temperature-only sensor in the basic FCS Starter Kit. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit for Pro Tanks This kit includes everything you would normally need to install the system on a "standard" tank. It comes with two TC 1.5" tees (short) and parts needed to connect your existing solenoids for cooling. The solenoid for gas out is also made for larger tanks. FCS Display Module and FCS I/O Module with power supply Density sensor (300mm) 1 pressure sensor with gas out pro solenoid Tiny Relay Module for wiring your cooling solenoid 2x TC Tees, clamps and gaskets All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A blowoff for the pressure out solenoid valve is recommended. You will need a 1.5" TC adapter to connect to your preferred blowoff tubing. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. Setting Up the FCS for Your Tank Solenoid Valve & Related Connection Hardware for Cooling For Brewtools tanks that use 34mm connection you will need a Ø4.5mm - 34mm solenoid valve. For Commercial tanks you will need a TC 1.5" to 34mm adapter and 1.5" TC Solenoid Valve. Either way, you will need a 2-pin LP12 cable and DIN43650 Type A adapter to connect the solenoid valve to the Brewtools FCS I/O Module. Would You Like a Visible Air Lock on the Spunding Valve? The Brewtools pressure relief solenoid spunding valve releases CO2 at the set point you choose on your controller. To visually see the CO2 release, add a blowoff to the pressure relief solendoid using a 1.5" TC adapter to your preferred tubing size. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC1.5" + M12, DC24V Ø2.0 Density/Temp Sensor 300mm, TC 1.5", CAN BUS 24V Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m (2 pcs) Cable, LP12-pin, 3m (2 pcs) Adapter, LP12-pin to DIN 43650 Type B FCS Tiny Relay Module TC Tee 1.5", L=90mm (2 pcs) Tri Clamps og gaskets (1.5") Ball mount for pipes (28,33,38mm) and connecting joint

Read more less

Upgrade your pump with our optional Air-Charged Dampener. Diaphragm pumps naturally create a "pulsing" flow; our dampener smooths this out into a steady stream, which is essential for filtration processes. By removing the surge, you protect your filter media from pressure spikes, ensuring a cleaner finish and longer filter life. This unit is sized for the 2" MB Sanitary Pneumatic Diaphragm Pump. Tri-clamp adapter fittings are included.  

Read more less

An adapting line to convert the CE970 rinsing base for use with standard 1/4" or 5/16" gas line. Features an in-line check valve to control gas flow without needing the tank nearby. Includes our H550 Gas Line Quick Disconnect Set for installation into an existing gas system. We recommend outfitting whatever other accessories you may want to connect to your gas tank with an H550A Gas Line QD Male fitting for easy interchangeability.

Read more less

Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. An upgraded version of the FCS Starter Kit w/ Density Sensor is also available. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity*, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System. FCS Display Module and FCS I/O Module with power supply 1 temperature sensor (TC 1.5" 160mm) 1 pressure sensor with gas out solenoid All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A ball clamp and a connecting rod. An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300l+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Rembember clamps/gaskets. If you don't have a Brewtools Unitank, we recommend getting TC 1.5" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC34mm + M12, DC24V Ø2.0 Temp Sensor, PT100, TC 1.5", 160mm Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m Cable, LP12 3-pin, 3m Cable, LP12-pin, 3m Adapter, LP12-pin to DIN 43650 Type B Recommended Separate Parts: Solenoid valve for cooling with adapters/cables or submersible pump Ball Mount connector and pipe clamp etc. Airlock (Top mounted or barb with silicone tube) Adapters and fittings to fit your tank Brewtools Product Number: 7713567

Read more less

Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 43.3" Max height w/o acc.: 51.2" Packaging size: 44.5" (h) x 20.5" (w) x 20.5" (d) Net weight: 99 lbs Gross weight: 110 lbs Tank diameter (inside): Ø15.75" Gross volume: 22.7 gal Max rec. volume: 21.1 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

Will thread into some body connects and form a seal with a dip tube gasket added. For use when making your own custom equipment. With ball lock QD's. Female thread is at 5/16-24 -5 45° flare (SAE J512).

Read more less

Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe All valves, fittings, and gaskets come included Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high-end fermentation tanks with new features and a lot of possibilities. Key Features: Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a coil Many options for connecting accessories like sensors, heaters, carb. stones and other accessories Conical pressure rated for 2 bar / 30 PSI Cooling jacket pressure rated for 0.5 bar / 7 PSI 8" TC port on top for easy access 2" TC dump and racking valves Brewtools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party. Specifications: Low height w/o acc.: 32.6" Max height w/o acc.: 40.5" Packaging size: 33.4" (h) x 20.5" (w) x 20.5" (d) Net weight: 84 lbs Gross weight: 98 lbs Tank diameter (inside): Ø15.75" Gross volume: 13.5 gal Max rec. volume: 10.5 gal Min rec. volume: 5.3 gal Volume, cone: 3.1 gal Material: 1.5mm stainless steel (SS304) Operating pressure: 1.0 bar / 15 PSI Max pressure: 2.0 bar / 30 PSI In the box: Unitank with adjustable frame 1 pcs Analog pressure gauge, TC34mm 2 pcs Butterfly-valve, 2" 1 pcs Butterfly-valve, 34mm DN20 1 pcs Blow-off pipe 1 pcs Racking arm 2" 1 pcs TC elbow 90°, 2" 1 pcs Insulation jacket, black neoprene 1 pcs Sample valve, 34mm 1 pcs TC Adapter 8"-3" 1 pcs TC blind cap, 3" 1 pcs TC blind cap 2" 2 pcs TC blind cap 1.5" 3 pcs TC blind cap 34mm 2 pcs TC gasket 8" lipped 2 pcs TC gasket 3" 2 pcs TC gasket 2" 5-pack 1 pcs TC gasket 1.5" 5-pack 3 pcs TC gasket 34mm 5-pack (DN20) 1 pcs Tri Clamp 8" 1 pcs Tri Clamp 3" 5 pcs Tri Clamp 2" 2 pcs Tri Clamp 1.5" 10 pcs Tri Clamp 34mm 1 pcs TC tool 4 pcs M10 steel/rubber feet 1 pcs TC34mm safety valve (PRV, 2 bar) Necessary bolts and parts for assembly 5 year manufacturer's warranty Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc. For User Manuals and support, please follow this link to Brewtools Docs. NOTE: Model in photo is a prototype. Minor changes and improvements may occur.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Relieves pressure while filtering from one keg to another plus allowing reading the pressure in the receiving keg.  Notes: The very end of the pressure relief valve can be adjusted by unscrewing to adjust the pressure. If tight, and not adjustable by hand, it needs to be loosened with pliers. Wrap a towel around the end piece of the pressure relief valve (about  the last 1/4 in) and loosen with pliers. Then finger tighten or loosen to desired pressure. Gauge reads 0 - 15 psi

Read more less

Designed by MB's in-house engineers with a focus on cleanability, ease of use, and durability Made from 304 stainless steel throughout with passivated 2B polished finished on the interior Sanitary tri-clamp connections from top to bottom with centered bottom drain, top vent/CO2 port with butterfly valve, and 4" hopping port—all fittings included! 15% extra headspace with a working volume of 2 bbl and max volume of 2.3 bbl True domed top and bottom with full length site gauge with sediment trap 1.5 mm thick dimple welded cooling jacket—See related product for the 2 bbl Single Shell Brite Ships domestically from within the contiguous United States These heavy-duty Beer Tanks are purpose built for longevity, quality, and cost effectiveness, and boast a hefty list of quality features to ease the brewing process. MB brite tanks are made from 304 stainless steel and built to high quality standards. All of our brite tanks are pressured tested at the factory, feature 100% sanitary welds, and are backed by our one year warranty. Every brite tank features an average 15% headspace not stated in the volume, so for example, a 10 bbl brite really has 11.5 bbl of volume. The 1 & 2 bbl Jacketed Brites feature sealed pressure gauge, and plunger-style sample valve to protect against infection. They also feature full length site gauges that extend below the bottom of the tank. This allows you to see when the tank is down to its last couple of pints, rather than its last couple of gallons. Great Quality from MB MB is a brand that we dedicate to crafting and sourcing the equipment pro brewers need to make an exceptional product efficiently and consistently. Our brite tanks between 1 and 60 bbl are designed by our in-house team of engineers with decades of professional brewing experience. Focusing on cleanability, ease of use, and durability, we’ve made sure our tanks have the features that modern brewers expect when purchasing a new tank. While some discount dealers chase down bargain priced tanks from a string of manufacturers, we have maintained a long running relationship with a single manufacturer that ensures the quality of our products never wavers. Great Value from MoreBeer! Pro If you used MoreBeer! as a homebrewer, you may not know that MoreBeer! & MoreBeer! Pro combined is one of the largest brewing supply companies in the world with over 250,000 customers. We’ve seen countless homebrewers turn pro, and there’s nothing that makes us happier than being a part of that transition. As a privately owned brewing supply company that's been in business for over 25 years, we’ve established relationships with suppliers and manufacturers around the world and at every level of the industry. We get a great price and we pass that on to you. Features Include: 304 stainless steel construction Includes a glycol jacket which is dimple welded and 1.5 mm thick True domed top and bottom Full length site gauge with sediment trap Pressure/Vacuum relief valve 1 Bar / 15 PSI Carbonation stone Sealed pressure gauge Analog temperature gauge Sample valve Center bottom tri-clamp drain Top vent/CO2 port with butterfly valve Pt10 Thermocouple interface Specifications: Grade 304 Stainless Steel Internal Finish: #2B Tank Height w/ Fittings: 53.5" Tank Diameter: 29.5" Empty Weight: 265 lbs Working Volume: 2 bbl Max Volume: 2.3 bbl Working Pressure: 1 Bar (14.5) All ports are 1.5" TC except for 12" TC Dome Port and 4" TC Hopping Port and 1/2" NPT Glycol Ports Please Contact our Customer Service department at 1-800-600-0033 to assess shipment costs and place an order.

Read more less

Shutoff check valves can be used in multiple gas applications. Commonly added to CO2 regulators or manifolds to protect your equipment from back flow. 1/4" NPT check valve with 1/4" barb. Use with 1/4" or 5/16" ID gas line.

Read more less

Perfect for mounting Kegland RAPT Cannular Can and Bottle Filler (CAN250), RAPT Temperature Controller (FE971), and  Gauge Guard for CO2 Regulators (D1082 & D1175A) Can be used to hang any equipment that has keyhole style cutouts or circular holes for hanging with screws High-quality stainless steel posts resists corrosion in humid brewing environments. Perfect for mounting regulators, manifolds, or tools inside fridge walls where coolant lines might be hidden. Designed for brewers who value a clean, organized workspace, these hangers provide a sturdy mounting point for various draft appliances and accessories without the need for drilling. Particularly useful for some kegland hardware, you can also use these to hang a draft tool, adjustable wrench, etc.  Installation Best Practices To ensure a permanent, high-strength bond, please follow these guidelines: Prep the Surface: Thoroughly clean the mounting area with isopropyl alcohol to remove any oils or dust. Temperature Matters: If installing inside a kegerator or keezer, ensure the unit is turned off and at room temperature. The adhesive will not cure properly in cold or damp conditions. Let it Set: For maximum hold, allow the adhesive to cure for at least 24 hours before hanging any equipment or attaching hoses. Most Commonly Used With: RAPT Cannular Can and Bottle Filler (CAN250) RAPT Temperature Controller (FE971) Gauge Guard for CO2 Regulators (D1082 & D1175A) KegLand Part Number: KL50715

Read more less

This is the same fitting we use in our kettles.  Designed with internal 1/2" FPT threading to accomodate diverters or maximizers, and outer 1/2" MPT threads for affixing a ball valve.

Read more less

The Ultimate FermZilla Combo Pack! Get the FermZilla Easy-Grip Tri-Conical & our most highly recommended accessories at an unbeatable price! Includes some of our favorite accessories for the FermZilla, such as the Pressure Kit with Floating Dip Tube so you're always racking the clearest beer, Duotight BlowTie 2 for pressure fermentations and flow control keg transfers, and Insulating Jacket to help maintain stable fermentation temps These accessories will help unlock the FermZilla's full potential, so buy them together and enjoy the savings! Combo Pack Includes: FermZilla Tri-Conical Easy-Grip Fermenter | 27L | 7.1G Pressure Kit w/ Floating Dip Tube Duotight BlowTie 2 Spunding Valve Insulating Jacket FermZilla Tri-Conical Easy-Grip Fermenter The FermZilla is the perfect option for brewers that want all the advantages of a conical fermenter without the price tag of a full-blown stainless-steel unit. It allows you to dump trub, harvest yeast, and with the addition of CO2 cylinder and regulator, you can carbonate and serve – all in one vessel! The clear PET tank allows you to visually monitor fermentation activity and is pressure rated to 2.4 Bar (34.8 psi), which means you can ferment under pressure, reducing ester and fusel alcohols in your finished beer. This also gives the ability to perform pressure transfers. If you prefer to move your finished beer to a keg or other vessel, you can do so with little to no oxygen exposure. The FermZilla Tri-Conical Easy-Grip model comes packed with accessories so you can take full advantage of this pressurizable fermenter on day one. The new stock standard includes Easy-Grip threaded lid ring, BlowTie spunding valve with integrated pressure gauge, ball lock carbonation caps for the lid and collection container, floating dip tube kit with weighted filter, volume marker graduation sticker, and adhesive thermometer.  What's Included: FermZilla 27L Tank with 3" T.C. Bottom Port Easy-Grip Threaded Lid Ring Integrated Gauge BlowTie Kit Spunding Valve (0-15 psi) Silicone Dip Tube Kit with Yellow Weighted Filter and SS Float (2) Yellow Liquid Carbonation Caps (2) Red Gas Carbonation Caps Fermzilla Pressure Lid with Red PRV (35 psi) 3" T.C. Butterfly Valve 600 mL Collection Container with 3" T.C. Connection Stainless Steel Stand with Swing Handles 3" tri-clamp with gasket Graduation Sticker Adhesive Thermometer Specs: 27 L (7.1 gal) Total Volume Pressure Rated to 2.4 Bar (34.8 psi) Height in Stand - 30.2" Tank Diameter - 13.9" Diameter in Stand - 15.3" Lid & Collection Container Ports - 28 mm PCO 1881 threads Temperature Rating: When not under pressure, do not expose to liquids above 131°F When under pressure, do not expose to any temperatures above 95°F* *Please note that the temperature rating for the FermZilla tank is lower when using it under pressure. When not under pressure, it is perfectly safe to transfer wort into the tank below 131°F or to use hot liquids below this temp for cleaning. When under pressure, make sure to keep your fermentation temperature below 95°F and keep the fermenter in an environment that is below 95°F ambient. This is especially important when fermenting with kveik yeast. These strains are known to ferment hot if no temperature control is being used. Exceeding the temperature rating may compromise the tank, leading to a shorter life span or sudden failure to maintain pressure. Even with proper use, we recommend replacing the tank every two years. Please note: when using the FermZilla under pressure, you must perform a water pressure check to ensure your connections are leak proof. To do this, fill your FermZilla up with water, apply at least 15 psi pressure, and check for leaks around all caps and threads.   Pressure Stress If you use the FermZilla to ferment under pressure, or you use CO2 to pressure transfer or force carbonate your finished beer, it is very important that you conduct semi-annual inspections of your tank. Even with perfect care, the FermZilla tank may show signs of wear from pressure stress over time. We recommend visually inspecting your tank for stress creases or other signs of wear once or twice a year. A hydro test should be conducted every two years, even if no signs of wear are found. The process is simple: Fill the tank to the brim with water Replace the Red PRV with a Green PRV rated to 4.5 BAR or higher Pressurize the tank to 4 BAR (58 psi) Check for leaks, then replace the Red PRV when finished If leaks or potential points of failure are found, replace the tank before you continue using pressure with your FermZilla. General Care Taking good care of your FermZilla begins with cleaning and sanitizing the unit before and after use. The tank is made from food-grade PET, which is beautifully clear, but can be sensitive to long soaks in cleaners and acid-based sanitizers. In general, we do not recommend leaving products like PBW or StarSan soaking in the tank for more than an hour. Extended soaks have the potential to degrade the PET material and shorten the lifespan of the tank.   KegLand Part number: KL47296 NOTE: FermZilla tanks are marked with a manufacturer’s “expiry date”. This does not indicate that the tank is bad after this date; it simply indicates that a hydro test may be in order. 2 years after production and every 2 years after first use, it is recommended that the tank be hydro tested to ensure the tank is holding pressure. You will also need the D1072 Green PRV to perform the test. If you do not plan to pressurize the fermenter, the test is not necessary.   FermZilla Tri-Conical 27L & 55L | User Guide

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   With Duotight adapters you can take your draft system into the 21st century with EVABarrier draft line. This double walled tubing offers superior protection against oxidation, CO2 loss and microbial growth. Plus, it's BPA and PVC free! EVA tubing is the future of draft line for professional applications, and now you can rig up your home system with the same first-class tubing. 4 mm x 8 mm EVABarrier is our recommended size for short beer lines in the 5-6 ft. range. 5 mm x 8 mm EVABarrier is recommended for longer beer lines in the 10-12 ft. range. The KOMOS S-style coupler for European kegs can also be purchased bare if you prefer a different connection style. S-style sanke coupler Stainless body Stainless probe PRV rated to 4.5 BAR (65 psi)

Read more less

The pressurizable Flex Chamber attaches directly to any 2" butterfly dump valve and can be used for monitoring yeast activity, removing trub, harvesting and storing yeast, and many other tasks. Ball lock adapters can be attached to the 28 mm PCO 1881 threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into the fermenter. 2" tri-clamp, gasket and end cap included. The Flex Chamber is also fully compatible with the Gen 3 FermZilla Tri-Conical fermenters. Please note: never remove the Flex Chamber while your conical is under pressure. Always release pressure before removing the Flex Chamber. 

Read more less

1/8 in. Adapter for 20 in. Sight Glass.

Read more less

Use this quick disconnect set to seal a soda bottle under CO2 pressure. An ideal way to bring homebrew to a party without all the accessories. TIP N' TRICK: Add a CO2 tee inline with your current CO2 setup and install the H481 Kent Shut-Off Female QD w/ 1/4 in Barb included. This way you always have access to CO2 accessible to put your beer under pressure before leaving for the party. * A single-handed connection and disconnection * Strong plastic that can handle 250 degrees, very durable, and is medical-grade compliant and made from FDA approved material * Easy installation into your home brewery * KENT Systems quarter turn design functions safely

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory.   No Need to Upgrade Later, The X3 Comes Fully Loaded: Built-in external cooling jacket with 1.5" TC Ports Neoprene jacket for insulation Pressure Pack lid with floating dip tube, draft style QD connections for sampling/serving, and an extra 1.5" TC for hop bongs. The Clear Flex Chamber Bottom Dump allows you to see fermentation, collect and remove trub, and has added ports for purging, oxygenating, carbing and more... so flexible. Highest quality mirror polish finish inside and out Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation New Features: Professional 8” Tri-Clamp lid replaces the need for a complicated band clamp to attach the lid Four crossbar reinforced legs, that flare out, create the most stable base and more access to the front fittings and dump system Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more 3" oversized bottom port and Butterfly Valve with 3” tri-clamp Flex Chamber collection vessel The new X3 from BrewBuilt sets the new standard for quality. We guarantee that you will love the fit and finish of the X3 Uni Jacketed Conical. Made entirely of 304 stainless steel, with flawless welds and a dazzling mirror-polish finish inside and out that is simply the best. The BrewBuilt X3 Uni is easy to sanitize and even easier on the eyes. It is definitely Instagram worthy! #BrewBuilt External Cooling Jacket When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The BrewBuilt X3 Jacketed Conical offers maximum cooling power without any compromise of sanitation. 8” Tri-Clamp Top Port New to the X3, the 8” Tri-Clamp lid is rock solid and easy to use. The 8” opening allows plenty of space to still get in and clean the inside of the conical by hand if desired. A unique 8”, three-piece, tri-clamp is used to make sealing the top very easy and very secure. Extra Large 3” T.C. Dump Valve The largest in the industry. Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 3" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Collection Jar and Yeast Harvester. Reinforced Four-Leg Foundation There’s a common complaint about the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X3 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X3 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery. The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare. Adjustable Feet The X3 Jacketed Conical comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time. Flex Chamber Collection Jar - Trub Separator & Yeast Harvester Working in collaboration with KegLand, we developed the pressurizable Flex Chamber Collection Jar. It attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 3" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation. Pressure Pack with Clear Float Technology Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened. Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind. Other Features You’ll Love: Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off Stainless steel lid clamp with single-piece molded silicone gasket In our GEN 3 redesign, we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons X3 Accessories: BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X3 with an active fermentation) The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual. Hop Bong Oxygen-Free Dry Hopping Device The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops. High Roller Caster Set Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters. IceMaster Max 2 Built to pair perfectly with the IceMaster Max 2 glycol chiller. Easily and efficiently control your fermentation temperature and cold crash for conditioning and clarifying. Pair with our BrewBuilt Insulated Tubing Kit that comes complete with premium quick disconnects with shutoff valves that provide a “dry break” when they’re disconnected. Immersion Heater The X3's cone features a 2" tri-clamp port specifically for installing an Immersion Heater. The low watt density heating element gently warms your fermenting beer without scorching. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year. Full List of X3 Conical Features: External Cooling Jacket with 1.5" Tri-Clamp connections Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down. Flex Chamber Collection Jar, a clear, pressure capable bottom jar that allows you to see fermentation, remove trub, and connect additional accessories Neoprene insulation sleeve Wide base with 4 legs for stability 304 stainless steel construction Mirror polish finish Interior welds are the best in the business - uniquely ground and polished (1) 2“ TC port for direct immersion heaters (3) Horizontal welded cone ports (1) 8" Lid Cap Opening with 8” TC Clamp (5) 1.5" TC Lid Openings 3" TC bottom dump with 3" TC butterfly valve 1.5" Thermowell for inserting thermal probe (4) Adjustable feet Silicone tube for blow off Stainless 8” Three Piece Tri Clamp & one piece molded gasket Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations) For volume and dimensional specs, Download the PDF. Installation Note: The Pressure Pack's Clear Float floating dip tube is sized to fit all models of the BrewBuilt Conical. Depending on the size of your fermenter, you may need to shorten the silicone tube for better performance. When installed on your empty fermenter, you ideally want the dip tube to hang freely with just enough length for the end of the dip tube to touch the bottom of the tank.

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Everything you need to have some fresh beer on the go. This ultimate growler is made from double wall, vacuum insulated stainless steel which makes it impervious to oxygen and sunlight. The included pressure lid allows you to pressurize the growler up to 30 psi with the provided mini CO2 regulator. The regulator uses 16 g threaded CO2 cartridges. Includes: 2 L stainless steel growler Pressure lid with plastic tap Mini CO2 regulator 6 CO2 cartridges Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.   

Read more less

Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. What makes KOMOS Kegerators better than the rest? Designed to hold up to FOUR 5-gallon ball lock corny kegs (see below for full list of what fits) Serve ice cold beer even in the warmest environments thanks to highly-efficient refrigeration components Stainless steel forward-sealing faucets offer a huge upgrade over common chrome plated brass taps Choose from the classic stainless, stainless with black finish or the upgraded stainless flow control model Faucets mount to a high-quality stainless steel tower, rather than a cheap chrome plated tower Interior fan diverts cold air up into the tower to keep your beer lines cold and reduce foaming EVABarrier double walled draft tubing protects your beer against oxidation Duotight push-to-connect fittings make assembly a breeze Included KOMOS Dual Gauge CO2 Regulator maintains consistent pressure and is easily adjusted The KOMOS Kegerator offers a stunning set of features that clearly separate this unit as the most modern kegerator on the market. With more interior space than other models, the KOMOS Kegerator is designed to fit up to four 5-gallon Slimline Torpedo kegs or Pepsi-style Ball Lock Corny kegs. Whether you choose the single, double, triple, or quad tap configuration, you'll receive stainless steel forward-sealing faucets in either classic or flow control model. Stainless faucets are a huge upgrade over the chrome-plated brass faucets commonly included with other kegerators, and you'll quickly recognize the quality of a forward-sealing beer faucet compared to the standard taps seen at your local tavern or in-law's mancave. Rather than a chrome plated tower, the NukaTap faucets are mounted to a stainless steel tower that remains cool before, during, and after each pour thanks to a tower fan diverter that recirculates cold air within the kegerator and blows it up into the tower to keep your beer lines cold and reduce foaming. From keg to faucet, your beer will pass through EVABarrier draft lines, a premium double-walled tubing designed to protect against beer oxidation. And with Duotight push-to-connect fittings, you'll have your lines connected in a snap with no need to force the tubing over barb fittings or fiddle with hose clamps. Other features you'll love about the KOMOS Kegerator include its highly-efficient cooling capacity so you'll be serving ice cold beer even in the warmest temperatures, extra wide temperature range from 26–82°F, dual gas inlets at the back, aluminum internal floor, rolling casters, and the included KOMOS Dual Gauge CO2 regulator. The most eye-catching difference between the KOMOS unit and other kegerators is definitely the capacity. This is the first kegerator we have offered that comes with a quadruple tap tower option, and that’s all thanks to the redesigned interior. Most kegerators position the compressor on the right or left side of the inside floor, making one side shallower than the other. KOMOS positions the compressor in the middle so both sides of the interior have an equal depth. This seemingly small detail allows the unit to hold up to four 5-gallon Slimline Torpedo or Ball Lock Corny kegs. Dual gas line inlets are absolutely clutch if you want to serve beverages at two different pressures or use two different types of gas. Both inlets are just over 3/4" in diameter and feature PCO 1881 threads. This threading allows you to use the plastic Carbonation Ball Lock Cap (FE13) as a quick connect option for your gas lines. Upgraded condenser, evaporator, and insulation make this unit highly efficient, yet quiet, so you can serve ice cold beer in even the warmest temperatures. The unique internal fan provides excellent air circulation, pulling cold air from below the evaporator and blowing it back over the top of your kegs and up into the tower to chill your draft lines. Extra Wide Temperature Range is Perfect for Homebrewers The KOMOS kegerator is tailored to a homebrewer's needs. Take, for example, the extended range digital controller with an adjustable temperature range from 26 - 82°F. This allows homebrewers to use as fermentation chamber and is something that other kegerators don't do. Although the unit does not provide heating, the extended range allows you to program the internal temperature at say an ale fermentation temp of 68°F and will provide cooling whenever the temp rises above that set point. With the insulation provided by the kegerator, heating should rarely be needed, but you can always place a low wattage heat wrap inside the unit if ever needed. The digital controller always displays the temperature and is easily adjusted from the front of the kegerator with the door closed. It's pretty nice. Forward-sealing Stainless Faucets and Towers All KOMOS kegerators come with NukaTap stainless steel forward-sealing faucets and a stainless steel draft tower. While other kegerator brands include basic, chrome-plated faucets and ABS plastic draft towers to reduce cost, KOMOS includes these premium upgrades as standard. Forward-sealing means that while in the closed position the faucet will keep beer in it instead of draining out. This keeps the internal parts from getting sticky and reduces the chance of off flavors transferring to your beer while you pour. Most other kegerators on the market will include the cheapest, rear-sealing chrome-plated beer faucets that you'd find at any dive bar. KOMOS kegerators include not only a faucet that features superior pour technology, but made from stainless steel which won't corrode over years of use. Choose from the classic forward-sealing faucet, matte black finish faucet, or the upgraded flow control model that allows you to dial in the flow rate of the beverage you're dispensing. The flow control faucet is a great option for users that often switch between beer styles with different carbonation levels. No need to rebalance your lines or play with your regulator settings. Instantly make adjustments as you pour to dial in the flow rate. This is also a super convenient feature for when you want to grab a quick growler on your way out. By dialing back the flow rate, you can gently fill your growler so CO2 stays in solution and your beer doesn't pour flat when it comes time to share. Click here to learn more about the Classic, Black, and Flow Control faucet models. Duotight Fittings & EVABarrier Draft Tubing Duotight and EVABarrier have revolutionized how you connect draft line, and our kegerators come standard with both. We love Duotight push-in fittings for their quick connection, reliable seal, and versatility. Setting up and connecting draft line has never been easier -- no more hose clamps or heating water to soften tubing! Each kegerator comes with Duotight fittings for the tower shanks, regulator, and for splitting gas lines (double & triple tap only). We recommend adding Duotight fittings to use for your keg connections as well. Depending on whether you'll be serving from homebrew kegs or commercial sanke kegs, you'll need two DUO106 or two DUO104 per line. EVABarrier tubing has been engineered with protection in mind and is both PVC-free and BPA-free. This double walled tubing offers superior protection against oxidation, CO2 loss, and microbial growth. EVA tubing is the future of draft line for professional applications, and now your kegerator will feature the same first-class tubing. KOMOS Regulator The included high-quality KOMOS CO2 regulator maintains consistent pressure and features a blow-off PRV with pull ring for safety and to relieve pressure, rubber coated gauges, and a hand knob for easy adjustment. Many kegerator brands will include the cheapest regulator they can find, and while these regulators may work OK out of the box, they will eventually show signs of pressure creep which can lead to foamy beer and other issues with your draft system. Rather than have you rely on a regulator that is "just OK", KOMOS kegerators include their own premium dual gauge regulator with highly accurate precision diaphragm and heavy-duty steel gauges. Included with your kegerator package is a Duotight fitting that attaches to the regulator for an easy, solid, push-to-connect connection with your gas line. Added Features One of the unique features on a kegerator in this price range is the tower fan, which blows cold air up into your tower to reduce foaming issues. They also come standard with the KOMOS dual gauge CO2 regulator, which is super beefy and consistent in delivering accurate pressures. Most Chinese-made regulators experience creep where the pressure increases over time. The KOMOS regulator is by far the best CO2 regulator we have seen made in China. The countertop drip tray couldn't be easier to keep clean. Built-in drip trays look cool, but they're a pain to keep clean. Before long they get pretty disgusting with dried, spilled beer -- attracting fruit flies and becoming a haven for mold and bacteria to grow. They'll often overflow the reservoir inside the kegerator causing a huge mess. Our kegerator's tray is designed to be removed and easily washed. Best Value & Backed by MoreBeer! We've looked around, and when you factor in fast and free shipping, you are getting the very best value on a kegerator in the USA. Plus, you're getting MoreBeer! service if something happens in shipment. We double box the unit with foam pads and have very little shipping damage. However, it will be delivered via Fed-Ex ground so damage is possible. If your unit arrives damaged just call us up and we will work with you to take care of it. Feature Summary: Stainless Steel Air Cooled Tower NukaTap Stainless Steel Forward-Sealing Faucets Choose faucet model and number of taps above Duotight Fittings make connecting draft lines a breeze Digital Thermostat with wide 26 - 82° F temp range. Robust KOMOS Dual Gauge Regulator included CO2 Tank holder mounts on back of kegerator (tank not included) Efficient and powerful compressor Stainless Steel Door Countertop Style Drip Tray Aluminum floor for additional keg support Includes EVABarrier beer and gas tubing Beverage line measures 4mm ID x 8mm OD 1 x 1.7m length of line per tap Gas line measures 5mm ID x 8mm OD 1 x line of varying length depending on number of taps (2, 2.5, or 3m) 4 Tap model includes uncut rolls of bev & gas line We recommend cutting bev lines to 1.7-2m lengths (5.5-6.5 ft.) Gas lines can be cut to whatever length best suits your needs Duotight adapters for draft shank and regulator connections Duotight tee fittings for splitting gas lines (2, 3, 4 tap only) You will need to purchase keg connections depending on whether you are serving commercial sanke, ball lock corny, or pin lock corny For ball lock and pin lock disconnects we recommend DUO106 For commercial sanke keg couplers we recommend DUO104 Available Kegerator covers and "off road" casters for moving over uneven terrain Detailed instructions on assembly and use Specifications: 23.75" wide 25" deep 31.5" with CO2 mount 32.5" Tall (fridge only) 35" with Caster wheels 48.75" with tower 51" with Casters and Tower 110 v - 60 hz 0.8 Amp draw Optimal ambient temperature is 65°F – 80°F CSA Certified Internal Dimensions: 19.5" wide 17" deep 16" down the center where compressor sits 28.5" tall What Fits: 5 Gal. Torpedo Keg - 3 5 Gal. Slimline Torpedo Keg - 4 6 Gal. Torpedo Keg - 3 5 Gal. Megamouth Torpedo Keg - 1 5 Gal. Pin Lock Cornelius Keg (Corny Keg) - 3 5 Gal. Ball Lock Cornelius Keg (Corny Keg) - 4 5.2 Gal. Oxebar PET Keg - 3 5.16 Gal. Sixth Barrel Keg (Sixtel, Log) - 3 (1) 5.16 Gal. Sixth Barrel Keg + (1) 7.75 Gal. Slim Quarter Keg 7.75 Gal. Quarter Barrel Keg (Pony Keg, Stubby Quarter) - 1 7.75 Gal. Slim Quarter Keg (Tall Quarter, The Slim) - 1 15.5 Gal. Half Barrel Keg (Full Size Keg) - 1 See below for the Kegerator Instruction Manual. Please note: This unit requires 4" of clearance on all sides and is not intended to be installed under a countertop. For a build-in unit, see the KOMOS Pro Stainless Steel Kegerator.  

Read more less