Search results for "pumps"

When siphoning is impractical or too time consuming, the home winemaker needs a pump. We helped pioneer the use of diaphragm pumps as an economical, gentle method to move small volumes of wine. This new take on an old favorite includes speed control. Now you can dial in the flow from 0 to 3 gallons per minute. Gentle, economical, flexible, and wow are all adjectives we would use to describe the performance. When this pump was first introduced to us, we loved the idea, but had concerns that the speed control would compromise the longevity of the motor. We build much larger pumps (our ChunkyPumps for commercial wineries) and normally you need a $700 frequency drive to control motor speed. However, we kept in touch with the manufacturer and after three years in which he has not had any issues, and after our own testing, we are now sold that this pump performs as promised. The manufacturer offer a 1 year warranty. A diaphragm pump works by moving wine through one pulsating diaphragm into the next. In this design, as opposed to a centrifugal pump which has a small head spinning at high speeds, the shear value is small meaning the wine is not as "beat up". A diaphragm pump is self-priming, meaning that it will "pump air" creating suction that will pull liquid out of your container and into the pump head. This makes the pump very easy to use for the home winemaker. This pump comes with 1/2" barbed ports for easy connectivity.  Comes with 4' tubing on both sides. 110 Volts, 0.5 Amp, 60 Hz. Includes a built-in pre filter to help prevent solid materials from entering the pump head and potentially damaging the diaphragms, which would prevent the pump from being able to move liquid. The clear plastic top of the pre filter unscrews for cleaning.

Read more less

The Super Sucker transfer pump is the quickest, most hassle-free solution to transfer your wine between vessels. Rack from primary fermenter to secondary or from secondary fermenter to bottling bucket or bottle filler reservoir, and do it without the excess oxygen exposure that results from hand-pumping a siphon or blowing into a carboy hood. Simply run transfer tubing from a racking cane to the pump and then to your receiving vessel, flip the switch, and let the Super Sucker do the work while you kick back and enjoy a cold beverage. With the Super Sucker you don't need gravity or CO2 pressure to move liquid around. Thanks to the pump's considerable max lift height, you can leave your heavy, full fermenter on the ground and place the receiving vessel side-by-side or even above the fermenter on a countertop. The 10 mm barbed inlet and outlet are perfect for use with 3/8" ID tubing. We recommend using our Racking Cane Siphon Kit plus 5 ft. of 3/8" vinyl tubing. Secure pump connections with butterfly hose clamps for easy set up and break down. Features: Self-Priming 10 mm Barbed Inlet/Outlet On/Off Switch Max Flow: 1.12 Gal/min Suction: 5 in. Max Lift: 150 in. (12.5 ft.) Maximum Temperature: 140°F Pressure: 90 psi Voltage: 12V DC (3.5A)  

Read more less

Self-priming stainless steel impeller pump with for moving wine or beer Cast stainless pump head with 1.5" tri-clamp connections On/off switch for easy operation 11 gallons per minute reversible flow rate Made in Italy by EnoItalia Centrifugal pump with cast stainless head. 1.5" T.C. inlet and outlet. Self-Priming. Reversible direction. Stainless impeller. Best used for transferring wine or beer between tanks. Specifications 11 GPM Max Pressure: 15.9 PSI (1.1 BAR) 1.5" Tri-clamp fittings Single Speed 1400RPM 194°F Max Temp Rating 14 LBS 12.6"x9.5"x7" 110V Note: Because this product is manufactured in Europe, it will come with a European plug. You will need to re-wire for use in the USA. Please see our European Equipment Wiring Colors guide for instructions on how to convert to a domestic plug.

Read more less

The X-Dry Series Chugger Pumps offer the same quality and value, but now with "Run Dry Protection" to help avoid damage caused by cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! This Chugger pump model has 1/2" MPT inlet and outlet, allowing easy configuration for any application! We recommend setting these pumps up with a Ball valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Inline Pump Head Food Grade up to 250° F 1/2" mpt inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend a 5/8" barb to help ensure a better seal!

Read more less

This is a submersible pump that can be easily added into your glycol chiller or ice bank. It has a small, compact design but can still push up to 1300 gallons per hour. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs.   We recommend this pump for maintaining the temperature of any batch size fermentation between 10 gallons and 2 bbl.   Maximum flow rate: 1300 GPH Max lift height: 10 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 100W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord  

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it.  The 2 wheeled cart can make it into tight places in the winery, and scoots out of the way when not needed.  With the included SS Bypass, you can reduce flow rates up to 25%.  SS head and cart mean easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Although the Euro 30 is self-priming, the pump should never be run dry. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery SS Bypass for reducing flow SS head w/ flexible impeller Light assembly required - pump is separate from cart in box 220v bare cord  - You will need to wire on the appropriate 220v plug 

Read more less

Flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Pre-wired with 110V plug Made in Italy by EnoItalia This version of the Italian-made Euro 20 features a pre-wired 110V plug. Unlike the 220V model, this pump is ready for use and does not require a plug to be wired to a bare cord. The Euro 20 is a great pump for smaller production. Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice. We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation. This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 110V single phase Pre-Wired Plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller

Read more less

A Stainless Steel pump housing is food-grade and nearly indestructable. Exact same internal pump as our H315 but with a stainless steel housing. Stainless steel is the material of choice for professional breweries because it is a durable, food-grade metal that can withstand caustic chemicals and can also be effectively sanitized. 3/4" mpt on center inlet. 1/2" mpt outlet. The magnetic drive acts as a clutch allowing the user to put back-pressure on the pump to slow down flow. With a ball valve on the outflow, you can slow flow all the way to nothing. Since it is a magnetic drive, it is not self priming, you must put the pump under the level of the liquid source. We wanted the pump to be brewer friendly so we had March install a bracket so that it can be mounted. We also had a 6' power cord with plug wired in for easy use. This is a tough little pump with a 1/25 hp, continuous-duty 1.4 Amp motor which can be run non-stop for extended periods. This pump has a maximum flow of 7.2 GPM with a maximum head of 12 feet. For an example of typical usage: with a head of 6' it will pump 3.25 GPM and with an 8' head it will pump 2.5 GPM. Motor requires 115v 50/60HZ power requirements.

Read more less

The RipTide™ (Tri-Clamp model only) has been taken to the next level with a design modification to be the ultimate work horse. Now it eliminates the easy-to-loose thrust washer and showcases a PRV vent barb that will allow for mess free priming. This version will improve the overall brewing experience and operation. Again, this change is currently only on the TC RipTide™. Gone are the days of  making do with a general purpose pump such as the March 815 and all the variant imported copies.  These pumps are cumbersome to disassemble, difficult to prime to get the wort moving, require the addition of a valve, a switch, and a proper base to hold the pump upright.  They also use noisy open motors that must be shielded from liquids.  All undesireable attributes for a homebrewing pump!  The team of homebrewers at Blichmann Engineering and our friends at March Manufacturing have created the RipTide™ to solve all of these problems! High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of head pressure! Carbon Fiber Dry Run Protection increases the life of your impeller and resists damage during accidental dry runs Tri-clamp head connection fully disassembles in seconds for easy cleaning 1.5" tri-clamp inlet and outlet connections Totally enclosed motor is splash proof and super quiet (50 dB) Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings. Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds - no more frustrating air locked pumps! Stainless steel head rotates 360 degrees to fit in virtually any installation Large stable base with protective rubber feet keeps the pump from tipping Convenient power switch on the base Includes a 10ft long cord with plug (120V) Base acts as a cord wrap for convenient storage Assembled in USA from USA and imported components

Read more less

This is a submersible pump is perfect for use with a glycol chiller or icebank. It has a small, compact design but can still push up to 800 gallons per hour. Comes with interchangeable 1/2 in. and 3/4 in. plastic barbs.   We recommend this pump for maintaining the temperature of any batch size fermentation that is less than 10 gallons.   Maximum flow rate: 800 GPH Max lift height: 9 ft. Comes with 2 barb fittings - 1/2" & 3/4"  High quality 60W motor runs quiet Stainless steel impeller shaft 6 ft. long power cord Temperature rating: 1-35 degree Celsius

Read more less

The X-Dry Series Chugger Pumps offer the same quality and value, but now with "Run Dry Protection" to help avoid damage caused by cavitation. The Chugger lineup of pumps represents a great value for an even better price. These pumps are workhorses in the brewery. Featuring a robust flow rate of 7 gpm, and a magnetic drive designed to handle back-pressure, these pumps are a great addition to any brewing setup! The Stainless Steel Chugger showcases their molded Stainless Steel Pump Head. This stainless pump is a steal for the price, and we've been more than happy with the quality! Use this to ease transfers between kettles, cool wort via a counterflow chiller, or recirculate icewater for quicker chilling! The Chugger pump model has 1.5" tri-clamp inlet and outlet, allowing easy integration with your T.C. kettles or fermenter! We recommend setting these pumps up with a butterfly valve on the outflow side, this way you can throttle down the outgoing flow rate, allowing for more efficient sparges or cooling! The pump head can also be rotated 360° (in 90° intervals) allowing for even more customization! Features: Run Dry Carbon Bearing Stainless Steel Center Inlet Pump Head Food Grade up to 250° F 1.5" tri-clamp inlet and outlet High Flow rate of 7 gpm Max Head 18.6 ft 115v 55" cord and plug attached 50/60 Hz, 1.4 amp 1/20 HP, 3500 RPM Note: When using silicone tubing, we recommend using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!

Read more less

Self-priming must pump with variable flow control from 0 to 100 gallons per minute Flexible rubber impeller gently pushes must and wine Stainless steel pump head with 3" tri-clamp connections Remote control operation with 30 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The Euro 60 Flexible Impeller pump is a 3" T.C. self-priming pump with a Stainless Steel head, controlled via a frequency inverter that allows for flow control from 0 - 100 gal / minute.  These units can be controlled via the remote control on a 30' cord, or from the control panel mounted on the pump itself.  Pumps are reversible, self-priming up to 15', and can be used with wine, juice, or must. The wheeled pump cart allows for easy movement and maneuverability around the winery or crushpad, and stainless steel construction insures that it'll survive through hectic wine seasons!  Completely food grade components have no impact on the quality of the wine, and a low shear value due to the larger TC fittings. This pump is a true all around winery pump because it can be used with must and wine. If you have a commercial crush pad with a larger destemmer crusher like a Jolly40 or above, and you process small berries, you will want to consider the Gamma 80 as it works better with dry fruit (lots of skin and not as much flesh).  However the Euro60 works well with most musts and then can be your work horse to move must and wine in the winery, making it a great value you can use year around. Although the Euro 60 is self-priming, the pump should never be run dry. Features: Stainless steel head with flexible rubber impeller Gear reduction for increased low speed torque Stainless steel cart Remote control  Flow rate from 0 to 100 gpm Flow is reversible Max Pressure: 33 PSI (2.3 BAR) 3" Tri-Clover inlet and outlet 4KW/5.3HP motor Will work with 208v or 230v Single Phase Power 14 amp draw Recommended temperature range: 40 - 150°F (5 - 65°C) Made by Enoitalia of Europe Please note: the unit will arrive with a bare power cord. You will need an electrician to wire the appropriate plug.  

Read more less

The ultimate pump for home winemaking use. Self-priming (will push air) so that it can draw out of a tank. Gentle diaphram action so as to not "beat up" the wine. Made of food-grade, NSF approved, materials polypropylene and santoprene, so no metallic interaction with wine. Pumps 3 gallons per minute. Flow can be restricted with an inline valve positioned on the outflow side. Self-regulating motor is designed to temporarily shut down, and then turn back on, when restriction pressure exceeds pump capacity. Has a heat limitation of 125 degrees Fahrenheit so cannot be used in brewing applications. Pump is equipped with 1/2" Male NPT posts on the inlet and outlet. Does not include the plastic barb fittings you will need to purchase separately. Please see the "You Might Also Need" section below for our recommendations regarding which fittings to attach to the pump. Please Note: The diaphragms in this pump are very sensitive to sediment and particulates and can be damaged if any solids are taken into the pump head. We recommend using an Inline Pre-Filter (FIL26) if you think there's a risk of sucking up solids with your inlet hose (pumping during pressing, for instance). Technical Specifications PUMP DESIGN: Positive Displacement 3 Chamber Diaphragm Pump CHECK VALVE: (1-Way Operation) Prevents Reverse Flow CAM: 3.0 Degree MOTOR: Permanent Magnet, P/N 11-195-01, Thermally Protected VOLTAGE: 115 VAC Nominal PRESSURE SWITCH: Factory Set @ 45 PSI Shut-Off, Turn On 25 5 PSI LIQUID TEMPERATURE: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max. PRIME: Self-Priming Up To 9.0 Ft. Vertical, Max. Inlet Pressure 30 PSI (2.1 Bar) PORTS: 1/2" - 14 Male Parallel Thread Materials: PLASTICS- Polypropylene VALVES- Santoprene DIAPHRAGM - Santoprene FASTENERS- Zinc Plated Steel NET WEIGHT: 5.3 Lbs (2.4 Kg) APPROVALS: UL, C-UL Listed, N.S.F. Listed

Read more less

Stainless steel pump with food-grade plastic impeller with for moving wine or beer 1.5" tri-clamp connections 13 gallons per minute flow rate Made in Italy by Marchisio This pump features a stainless body, housing, and bracket. It utilizes an impeller made from food-grade plastic. The impeller does not push air by itself so to prime it you unthread the priming nut on top of the filter housing and fill with water or wine. Comes with 1.5" T.C.  inlet and outlet. Has a .8 hp motor and moves 13 gallons per minute with no head. Will pump up to a height of 70'. 110v. Overall dimensions are 14.5" L x 7"W x 7"H. Weighs 15.4 lbs. Optional by-pass can be installed to restrict flow up to 25%.  This pump can handle some small solid particulate, such as grain particles, and is food grade up to 113° F. Please note the instruction manual references 230V for the voltage, but these pumps are custom configured by the manufacturer in 110V.  

Read more less

Replacement pump assembly for any variable volume fermenter. Includes built-in gauge and line to connect with gasket, but does not include gasket. Made in Italy. 

Read more less

Please note: the example images show an AU style 220V plug. This unit comes with a standard US 3-prong 110V plug. Updated images coming soon. A more powerful version of our best-selling MKII pump. This magnetic drive pump has 65 watt power, ideal for large batch homebrewing and micro brewers. The pump head is made from 304 grade stainless steel with 3/4" threaded ports that can easily be converted to tri-clamp. Works like a March or a Chugger but with a sealed case that is more water resistant (not water proof). The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. We recommend adding two 1.5" T.C. x 3/4" Female BSPP adapters to the ports. From there you can use a ForgeFit 1.5" T.C. x Male QD to use quick disconnects with your lines, or convert to your preferred tri-clamp fittings. Specifications: 110V / 60hz Max Head: 15-21 ft. Max Flow: 13.5 Gal/min Max Temp: 248°F (120°C) Rotatable 304 stainless steel pump head 3/4" BSPT fittings Water resistant casing KegLand Part Number: KL05487

Read more less

Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%.  SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input Voltage Required (6.5 amp draw) 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 220v bare cord  - You will need to wire on the appropriate 220v plug  Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.    

Read more less

Self-priming flexible impeller pump with stainless trolley cart for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

This magnetic drive pump is a perfect pump for your brew system. Use it to move hot wort in an all-grain system and also to transfer wort from boil kettle to fermenter. The housing of the unit is made from tough, food grade food-grade heat-resistant SPS. The magnetic drive allows you to slow down the flow without damaging the pump. This pump is not self priming so do not run the pump dry. The pump head can be rotated in 60-degree increments, allowing for 6 different pump head orientations. Optional stainless steel pump head upgrades available—standard stainless center inlet head or stainless inline tri-clamp head. Want More! power? Check out this pump's bigger brother, the 60-Watt MKII. Features: 110v/60hz Max Head: 11.15 ft. (3.4 m) Max Flow: 5 Gal/min (19L/min) 1/2" BSP fittings Rotatable pump head Max temperature - 248 F/ 120 C Water resistant (not proof!) casing Kegland Part Number: KL05470

Read more less

The Milwaukee MC740 PRO Conductivity (EC) controller and pump lets you measure and adjust EC levels automatically. Control the EC and Fertilizer Dosage in your Tank Automatically Control the EC and Fertilizer Dosage in your Tank Automatically. The MC740 kit includes the MC311 EC controller and the MP810 dosing pump to automatically monitor and fine-tune EC levels. Just set your EC parameters and let the Milwaukee EC Controller and pump do the rest. Common uses are nutrient tanks. Features Accuracy The Milwaukee PRO EC controller offers an accuracy to ±2% full scale. Automation The controller provides a control range of 0.0 to 10.0 mS/cm with alarms that activate when readings are higher or lower than set point. Compatible dosing pump The Milwaukee MP810 dosing pump (designed specifically for use with the MC311) is included in the kit. Easy installation The MC740 EC controller and pump kit comes with a complete mounting kit including a probe holder. Design Features Fast easy to read current results with large digital LCD readout Accurate to ±2% full scale Simple one-point calibration with manual trimmers for easy adjustment 0.8 to 2.8 mS alarm set point range is easily accessible on the front panel Alarm activated when reading is above or below set point Comes with full mounting kit including probe holders MA812/2 hardwired EC probe 6.5’ probe cables for extra flexibility 12 VDC power supply Pump provides a maximum pressure of 1.5 bar or more than 50 feet of head pressure with a 0.39268 GPH / 9.5 GPD dosing flow. Uptake & Discharge Tubing Material:  Polyethylene, 4.92' / 1.5 m. Black Pump Squeeze Tube Material:  Norprene.  

Read more less

Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 4.4 gallons per minute flow rate Made in Italy by EnoItalia The Euro 20 is a great pump for smaller production.  Featuring a SS head with 1.5” TC fittings, this flexible impeller pump is great for moving wine or juice.   We have this pump set up with a forward and reverse on/off switch on the body, simplifying operation.  This unit comes with mounting points for if you want to mount it to a cart or filler/filter. Features: Flow rate is 4.4 gpm Max Pressure: 46 PSI (3.2 BAR) 1.5" Tri-Clover inlet and outlet 220V single phase Input Voltage Required Bare Cord for wiring with the appropriate plug 0.5 HP motor 1.7 amps Recommended temperature range: 40 - 150°F (5 - 65°C) SS head w/ Flexible Impeller Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Combines all the benefits and advantages of our best-selling rubber impeller Enoitalia Euro Pumps with inline volume measurement.  This is a pump with a brain! Enter in the volume of wine you would like to pump and the EuroFill turns off when that volume has been pumped. With a built-in flow meter, PLC (programmable logic controller) and a touch screen this pump will reduce human error and make your cellar life a lot easier. Filling barrels, blending exact volumes of wine, and dosing larger tanks with specialized ingredients are a few of the most useful applications. You can also control pumping by time which can be useful for pump overs and cleaning solutions.   Includes a wireless remote control.  Made by Enoitala, a pump specialist, in Tuscany Italy.  Sold and supported in the USA by MoreWine!.  Unique Applications: Know the volume pump during any transfer Program an exact volume you want pumped Easily create perfect blends Fill barrels by volume (and then top off) Can be used for all general pumping application Features: Rubber impeller pump with electronic speed control Programmable Logic Controller (PLC) for manual or automatic operation Endress induction flow meter Programmable dosing, counting, and timer Remote control 7" Touchscreen Stainless steel control panel and trolley Dry run protection Pressure switch Specifications: Capacity: 0-6,340 GPH (0-24,000 L/h) Max Pressure: 33 PSI (2.3 BAR) 3" Tri-Clamp Inlet/Outlet 220V, Single Phase 4 kW Please note: the unit will arrive bare without a power cord, plug, or controls to power the motor on or off. You will need an electrician to wire the appropriate power cord and controls to the motor.

Read more less

The History of March and Homebrew Many years ago we worked with March Pumps to release what is now the standard pump in the homebrewing community, their model 809 (our H315) with a polysulfone head and 6' cord with plug. Thousands and thousands of these pumps have been sold to homebrewers. The New Design Now, with a slight design modification, the new model nearly eliminates past cavitation issues (where the impeller spins in an air pocket and no liquid moves). We've been testing/using the pump with our BrewSculptures for several years now and are extremely happy with the results, so much so that we are completely replacing the H315 with the high flow model. Still Works the Same The new model comes with all the great features of the original - magnetic drive, handles flow restriction, okay for boiling temperatures, 6' cord with plug, food-grade materials in contact with the liquid, 1/2" ports, etc. - but now features a different slightly higher flow rate with less issues of cavitation. The magnetic drive in a March pump acts as a clutch allowing the user to put back pressure on the pump to slow down flow. Since it is magnetic drive, it is not self-priming, you must put the pump below the level of the liquid source. This pump cannot be run dry. Features List Addtional Notes To restrict flow place a ball valve on the out flow of this pump. This is the pump we install and use on all of our BrewSculpture brewing systems We stock polysulfone replacement heads, H317, in case the threads are damaged. If you are looking for a pump for a larger home brewery or small nano brewery you can also look at our H325 Nano Brewery pump from March. Included bracket for mounting 6' power cord with plug wired in for easy use 115V - 50/60Hz Maximum flow of just over 7 gpm (at zero head) Maximum head of 18 feet (at zero flow) 1/2" mpt fittings on both inlet and outlet. Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor Motor is fan cooled Will handle internal pressures to 50 psi. Max temp rating: 250F Face unscrews and rotates at 90 degree intervals to adjust to your application. Note: When using silicone tubing, we recommending using a slighlty larger barb than the I.D. of the tubing. This is because silicone tubing tends to have greater pliability than most tubing. For example, when using 1/2" silicone tubing, we recommend our 5/8" barb (H620), to help ensure a better seal!

Read more less

Coming soon! The Euro 30 is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is late summer 2026. Self-priming flexible impeller pump for moving wine or juice Stainless steel pump head with 1.5" tri-clamp connections On/off switch for easy operation 19.8 gallons per minute flow rate Stainless bypass for reducing flow rate Made in Italy by EnoItalia The Euro 30 is a great versatile winery pump for all around cellar needs.  The sanitary connections are 1.5" TC to allow for easy hook up of hoses, filters, fillers, you name it. With the included SS Bypass, you can reduce flow rates up to 25%.  SS head means easy maintenance, and a power switch on the body keeps all necessary controls conveniently accessible. Features: Flow rate is 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 1.5 HP motor Self-priming Recommended temperature range: 40 - 150°F (5 - 65°C) SS Bypass for reducing flow SS head w/ flexible impeller 110V   

Read more less

GOpump10 is an intelligent pump for pumping wine or similar fluids. It can be used in "PUMP" mode where the delivery rate is automatically controlled at the user's set flow rate or in "BATCH" mode where the user's preset volume is delivered at the user's set flow rate. Two versions are available: GOpump10 and the lower cost GOpump10-LC. The GOpump10 features a magnetic induction sensor and is Bluetooth enabled with a free companion app. The GOpump10-LC has mechanical vane sensor and does not have Bluetooth capabilities. Usage: general purpose winery pump for transferring or filling wine. Built-in accurate totalizer provides accurate estimate of total wine transferred. Controllable flow rate allows gentle or rapid transfer of wine. Automatic shutdown on empty detection. NOTE: Do not use with fluids containing particles larger than 100 microns. Use inlet strainer. DO NOT use to pump grape must. Dimensions: 11.5" x 13" x 7" Weight: 17 lbs Flow range: 0.26-2.6 GPM Batch range: 0.1 to 9999 Liters (accuracy +/- 10mL) Sensor: Mechanical vane Power: 115/230 VAC 2A with built-in GFI Interface: Color LCD touch panel Environmental: IP65 splash-proof Process connection: 1/2" FNPT inlet and outlet Remote: N/A  

Read more less

GOpump10 is an intelligent pump for pumping wine or similar fluids. It can be used in "PUMP" mode where the delivery rate is automatically controlled at the user's set flow rate or in "BATCH" mode where the user's preset volume is delivered at the user's set flow rate. Two versions are available: GOpump10 and the lower cost GOpump10-LC. The GOpump10 features a magnetic induction sensor and is Bluetooth enabled with a free companion app. The GOpump10-LC has mechanical vane sensor and does not have Bluetooth capabilities. Usage: general purpose winery pump for transferring or filling wine. Built-in accurate totalizer provides accurate estimate of total wine transferred. Controllable flow rate allows gentle or rapid transfer of wine. Automatic shutdown on empty detection. NOTE: Do not use with fluids containing particles larger than 100 microns. Use inlet strainer. DO NOT use to pump grape must. Dimensions: 11.5" x 13" x 7" Weight: 17 lbs Flow range: 0.26-2.6 GPM Batch range: 0.1 to 9999 Liters (accuracy +/- 10mL) Sensor: High accuracy magnetic induction Power: 115/230 VAC 2A with built-in GFI Interface: Color LCD touch panel Environmental: IP65 splash-proof Process connection: 1/2" FNPT inlet and outlet. Tri-clamp fitting, strainer, sight glass included Remote: Bluetooth with free mobile App

Read more less

Self-priming wine pump with variable flow control from 0 to 20 gallons per minute Flexible rubber impeller gently pushes wine Stainless steel pump head with 1.5" tri-clamp connections Remote control operation with 40 ft. long cord Stainless steel control box Stainless steel rolling cart Made in Italy by EnoItalia This unit features a stainless steel control box not pictured in the primary image. Updated images coming soon. The perfect pump for moving wine from one vessel to the other.  These Flexible Impeller Pumps are controlled by a Variable Frequency Drive, allowing for wine or juice transfers as fast as 20 gallons per minute, down to a complete stop.  A sturdy Stainless Steel cart with nylon wheels allows for easy manueverability in the winery, and a lifetime of use.  The pump can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. We worked for a year to develop this particular pump with Enoitalia of Italy.  The value and price are really amazing. So much that we stopped making our own line of Chunky Pumps at the end of 2016.  Enoitalia has been making pumps for decades and while they are excellent at destemmer crushers and other equipment, pumps are their core specialty.  We will support the pump in the USA with common spare parts but we also have the backing and support of Enoitalia if anything was to go wrong. Although the Euro 30 is self-priming, the pump should never be run dry. Stainless steel head with flexible rubber impeller Remote control with 40' cord  included VFD allows for flow rate from 0 to 19.8 gpm Max Pressure: 40 PSI (2.8 BAR) 1.5" Tri-Clover inlet and outlet 220 v single phase Input voltage required (6.5 amp draw) 1.5 HP motor Recommended temperature range: 40 - 150°F (5 - 65°C) Handy SS trolley cart for easy movement around the winery The pump is reversible and can be controlled from the panel itself, or remotely via the wired controller, giving this workhorse even more flexibility. Please Note: This pump will NOT come with fittings.   It will have 1.5" Tri Clamp ferrules, and the appropriate fittings can be chosen from YMANs below.

Read more less

This pump does not have a plug. It comes with the appropriate connectors to wire it to the BrewZilla's circuit board. For a brewery pump with similar performance, please see the MKII Pump. This pump now comes standard on the 65L BrewZilla, but if you have an older Gen 4 model with the original 6W pump, you can upgrade to this more powerful unit. The Green Demon This pump comes standard with the 100L BrewZilla Gen 4 and the upgraded 65L BrewZilla Gen 4.1. To upgrade older 65L BrewZilla Gen 4 models with the smaller pump, you will need to perform some light electrical terminal rewiring. This pump comes fitted with blade and circle connectors to swap out the standard 6W pump. You will need to re-use the grommet fitting so be gentle when taking it off the 6W pump. Standard Configuration – No additional fittings/hoses required This configuration is a direct swap out of the 6w pump to the 25w pump. Utilizing the tee splitter and the original hosing that comes with the 65L Gen 4 BrewZilla. It does help a little bit if you use the outlet elbow piece on the inlet, and vice versa as the 25w pump is slightly taller than the 6w stock standard pump. Alternative Configuration – Oli's Hail Mary For this method you will need about 6.5" of 1/2" ID hosing, preferably braided silicone. You cannot use normal silicone hosing for this. This method does not use the tee piece or ball valve. It solely relies on the bigger 25W pump to do all of the transferring and recirculating needs. Please see product photos for configuration types. Specifications: Voltage: 220-240V at 50-60hz Max Head: 11.1 ft Max Flow: 5 gal Wiring: Fork and Ring Connectors fitted with insulation sheath Fittings: 1/2" (13 mm) barbs NOTE: Like almost all centrifugal pumps, do not run this pump dry. KegLand Part Number: KL25126

Read more less

Designed for the small 'Nano' commercial brewery where the March 815 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump. *Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble. Homebrewing Tips: 1. Great for Whirlpooling 20 gallons of wort or more. 2. Ideal for our Counterflow Chillers. Please note that the pump comes with a three foot cord WITHOUT a plug attached. It has a 16 gauge 3 wire setup. Statistics Motor: 1/8HP 110v/60Hz Max Flow: 17 G.P.M at zero head Max Head: 27 ft. at 1 GPM Inlet: 1" FPT Outlet: 1/2" MPT Materials in Contact with Beer Polysulfone Stainless Steel Buna N Ceramic

Read more less

Designed for the small 'Nano' commercial brewery where the H315 series is too small but you don't yet need a full on expensive professional brewery pump. The March Nano Brewery Pump –Stainless features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump. *Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble. Please note that the pump comes with a three foot cord WITHOUT a plug attached. Statistics: Motor: 1/8HP 115v/60Hz Max Flow: 17 G.P.M at zero head Max Head: 27 ft. at 1 GPM Inlet: 1" FPT Outlet: 1/2" MPT Pressure: Max. internal pressure is 200 psi Temperature Range: 250F or 121.1C Electrical: 115V 50/60HZ HP: 0.125 KW: .093 Materials in Contact with Beer: Polysulfone (Impeller) Stainless Steel (Front and Rear Housing) Buna N (O-Ring) Ceramic (Thrust Washers) Non-Submersible Max. liquid temperature is 250F degrees Max. internal pressure is 200 psi

Read more less