Wine Barrel Accessories

This is just the spinning spray head. We use this as part of our complete barrel washer, WE492. Some clever customers have asked for just this head so that they can fabricate their own washer. Features female 3/4" NPT threads for attachment. Height 3". Diameter 1 3/8"

Read more less

Stainless steel hose clamp will fit 3/8" to 7/8" Tubing.

Read more less

Integrate new oak flavor and structure into wine stored in a neutral barrel. A fantastic way to reduce the cost of buying new barrels with total control over the oaking process. The Infusion Tube is both simple to use and versatile. During any stage of the winemaking process, it is inserted into the barrel with the same ease as it is later removed. The tube is placed through the bung hole of a neutral 60 gal. (225 l. Bordeaux or 228 l. Burgundy) size wine barrel. Each new 8 oz load of Stavin Oak Cubes (the brand that we sell) has an effective extraction time of two-three months, providing 33 percent of new barrel extraction. Three loads offer 100 percent of a new barrel level. Thus, the winemaker exercises maximum control over the amount of oak integrated into the wine during fermentation, aging or prior to bottling. You can even mix the percentages of oak you use. For example you can try 60% French and 40% American oak in one barrel and compare against another barrel with 50% French and 50% American oak cubes. To ensure an air-tight barrel seal, the Infusion Tube includes a top silicone bung. In addition, a bottom silicone bung permits convenient emptying and reloading of Oak Cubes. High quality Cubes for loading the Infusion Tube are currently available in three year air-dried French, Hungarian and American oak. All Stavin cubes are fire toasted in the traditional method, a crucial stage in the processing of these cubes. These really are the highest quality oak cubes on the market. We have tested other, less expensive cubes and they are not even comparable. Loading instructions: Remove the bottom silicone bung; fill the Infusion Tube with one bag of Cubes; replace the bottom bung firmly; insert the loaded Tube into the neutral barrel and secure the top bung tightly. Each new load should remain in the wine for a minimum of two months before removing to reload. The tube accommodates 8 oz of Oak Cubes at a time. 24" L x 1 3/4"D with a 5" stem.

Read more less

Size 1 1/2" - 1 13/16"

Read more less

Single piece, clear, 19'' long sample taker for taking hydrometer samples out of carboys. Insert into carboy, allow to fill, place your thumb over the top hole and remove.  In a hurry?  You can suck on the top to speed up the process. 1-1/8" outer diameter.

Read more less

Used to stir up lees in a barrel or to ensure a complete mix of so2 or any other addtives, our stainless steel lees stirrer with 24" solid stainless shaft and fold out stainless paddle will get the job done quickly and efficiently.  Connect to drill and use on lowest speed. Included black plastic bung seals barrel while stainless shaft spins freely. 

Read more less

Replacement Internal O-Ring for Gas Transfer Tool Please note: Gasket may be red or black.

Read more less

This a single replacement blade for our WE590 Stainless Lees Stirrer with Plastic Blades. It's easy to break these off, and so we brought in replacements to avoid having to get a whole new unit! Customers of ours have also gotten creative and created custom tank mixers by attaching these to a long stainless shaft that they have had fabricated. Please Note: This is a single blade, you will need to purchase two if you need to replace both.

Read more less

A powder-coated metal barrel rack for the home user with one 30 gallon barrel. These racks are stable up to 6  racks high. *Please note that this is a custom manufactured product in small volumes, which is why it is only slightly less expensive than the double rack or the 60 gal size single rack. Approximate Dimensions: 8"H x 24"L x 15 "W

Read more less

Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi. It works great with our magnetic drive pumps such as a March or Chugger pump, but we do not recommend it with a impeller pump or for use with household water pressure. Platinum Cured Quantity ordered will be shipped as multiple pre-cut lengths. Maximum length available is 100 ft. *Will burst at 30 PSI at 70F.  

Read more less

Made from natural beeswax. Enough for one to three 5L barrels. Approximately 1.5" x 1.5" x .75" Kegland Part Number: KL12621      

Read more less

An oversized airlock, designed to keep your barrels safe. This will fit bung holes w/ openings from 1.5 - 2 in.  

Read more less

Stocked in the East and West to reduce your freight, get a great deal on Western Square Barrel Racks from MoreWine! Made from powder coated steel in the USA.  Western Square is the largest maker of barrel racks and can be trusted for quality. Each rack accomodates two 60 gallon barrels. 7" vertical spacing bertween bars provides easy access to top up, stir lees, etc.  Up to 10 racks can fit on one pallet. Order online or call our customer service team . These racks are stable up to 6  racks high.   44 1/2" W x 30 3/4" L x 14 1/8" H

Read more less

A heavy duty hose clamp for large OD tubing. As effective as a pre-formed clamp but without the expense or permanence.

Read more less

Securely bung your full-size barrels with this locking bung. Great for tight bunging barrels while rolling them on their side, moving barrels from location to location, or simply for peace of mind that this bung will not accidently get knocked out of place. A stainless plate embedded in the silicone causes the bung to expand outward when tightened. This creates considerable pressure against the bung opening, ensuring a super solid seal. Use a crescent wrench or 1/2" driver to tighten the nut on top of the bung. Bottom of bung measures 1.5" and the top of the bung measures 2.5".

Read more less

This stopper has two holes and we use it in the production of our #6.5 stopper thermowell. It features one 3/8" hole and one 1/4" hole. A racking tube or stainless tube can be inserted into the 1/4" hole with the aid of some lubrifilm, forming an airtight seal, and the 3/8" hole fits an airlock. Even after you wedge all this junk into it, it still fits a carboy neck! Also fits perfectly into a 1.5" tri-clamp ferrule, and the stopper's flange will ensure it doesn't fall in. Use this in any configuration you can think of, it'll fit: Airlocks, Thermowells, Racking Canes, and anything else you can imagine!

Read more less

Wooden barrel rack for Balazs 56L Hungarian Oak Barrel.  

Read more less

Wooden barrel rack for Balazs 28L Hungarian Oak Barrel.  

Read more less

Includes ball lock gas-in quick disconnect (barb), 5 ft of 5/16" ID tubing, and two hose clamps.

Read more less

Includes ball lock beverage-out quick disconnect (barb), 5 ft of 3/16" tubing, hand held faucet, and two hose clamps.  

Read more less

Our 3-piece thief is one of our most popular wine thieves. It can be taken apart into 3 sections for cleaning and sanitizing, then fit tightly together for taking samples. 27-1/2 inch length is ideal for taking samples from barrels, or other tall fermenters.

Read more less

Replacement silicone barrel sealing bung for gas transfer tool. Top diameter - 2.25'' Bottom diameter - 1.75'' Height - 2.25''

Read more less