Whether you're a professional winery, or are making small batches in your kitchen, hardware parts will be necessary. We offer dozens of hardware parts, from hose clamps to butterfly valves. Any hardware you'll need to make great wine can be found in the categories below!
Wine Making Hardware
Shop By Collection
-
Shatter Resistant Airlock - 3 Piece
This airlock made from polypropylene is much less rigid and less likely to crack compared to standard three-piece airlocks. Toss it into a bucket of sanitizer with your other equipment and don't worry about it breaking. For both carboys and buckets. In our opinion 3-piece airlocks are superior to the triple ripple type in that they can be taken apart and cleaned. However, we do sell the triple ripple or S-shaped type in case you are used to that type and would like to stay with it. Please Note: Stopper Not Included. KegLand Part Number: KL01595
$3.89
-
ForgeFit® Tri-Clamp Gasket | EPDM | 2"
EPDM gasket for 2" tri-clamp connection. Temperature rated from -30°F to 300°F.
$2.49
-
ForgeFit® Stainless Tri-Clamp Barb | 1/2" Barb x 1.5" T.C.
Convert 1.5" tri-clamp to 1/2" barb for connecting 1/2" ID tubing. Made from 304 stainless steel.
$20.49
-
Two Hole #6.5 Brewmaster Silicone Stopper
This stopper has two holes and we use it in the production of our #6.5 stopper thermowell. It features one 3/8" hole and one 1/4" hole. A racking tube or stainless tube can be inserted into the 1/4" hole with the aid of some lubrifilm, forming an airtight seal, and the 3/8" hole fits an airlock. Even after you wedge all this junk into it, it still fits a carboy neck! Also fits perfectly into a 1.5" tri-clamp ferrule, and the stopper's flange will ensure it doesn't fall in. Use this in any configuration you can think of, it'll fit: Airlocks, Thermowells, Racking Canes, and anything else you can imagine!
$5.99
-
Rubber Stopper - #5.5 With Hole
#5.5 stopper - with 3/8 inch hole. Top diameter 1.11 inches (28 mm), bottom diameter 0.95 inches (24 mm), length 1 inch (25mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).
$1.39
-
ForgeFit® Stainless Tri-Clamp | 1/2" MPT x 1.5" T.C.
Convert 1.5" tri-clamp to 1/2" Male Pipe Thread. Made from 304 stainless steel.
$20.49
-
Locking Silicone Bung for Barrel
Securely bung your full-size barrels with this locking bung. Great for tight bunging barrels while rolling them on their side, moving barrels from location to location, or simply for peace of mind that this bung will not accidently get knocked out of place. A stainless plate embedded in the silicone causes the bung to expand outward when tightened. This creates considerable pressure against the bung opening, ensuring a super solid seal. Use a crescent wrench or 1/2" driver to tighten the nut on top of the bung. Bottom of bung measures 1.5" and the top of the bung measures 2.5".
$36.99
-
ForgeFit® Stainless Tri-Clamp | 3" Clamp
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 3" tri-clamp Made from 304 stainless steel
$12.99
-
Stainless - 1.5" TC x 1" MPT
1.5" clover by 1" MPT. Full Flow. 0.87" I.D.
$17.99
-
Ultra Barrier™ Gas PVC Free Tubing - 5/16 in.
Ultra Barrier™ Gas tubing from EJ Beverage is constructed of a unique compound that provides for an excellent alternative to PVC. Advantages to this unique tubing are: Clear tubing with red stripe for identification as low pressure gas line PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 51 psi
$10.49
-
Stainless Tri-Clamp | 1.5" T.C. x 3/4" Female BSPP
Convert 3/4" BSPP (Straight Thread) fittings to 1.5" Tri-Clover. Often used on 20x20 plate filters, where the stock 3/4" barbed inlet and outlet fittings are replaced with these to convert to 1.5" Tri-Clover. Use along with our H928 o-ring to form a seal on the straight threads.
$28.99
-
Stainless - 1/2 in. FPT x 1/2 in. Barb
Use this fitting for connecting tubing directly to your pump. 1/2" FPT on one side, with a 1/2" barb on the other. If you are not using a QD Set or a ball valve, this is a handy piece of stainless for a direct connection!
$6.59
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 2" x 1.5"
2" x 1.5" tri-clamp concentric reducer. Made from 304 stainless steel.
$32.99
-
Gas Tubing Assembly - Ball Lock Quick Disconnect (QD) - 5/16 in.
Includes ball lock gas-in quick disconnect (barb), 5 ft of 5/16" ID tubing, and two hose clamps.
$14.99
-
Beer Line Assembly with Quick Disconnect (QD)
Includes ball lock beverage-out quick disconnect (barb), 5 ft of 3/16" tubing, hand held faucet, and two hose clamps.
$15.99
-
Hose Clamp | 2-1/4" to 3-1/8" OD Tubing Clamp | Flathead Adjustment Screw | Stainless Steel
Stainless steel screw clamp. High quality. Fits tubing with an outer diameter between 2.25 and 3.12 inches.
$3.49
-
Stainless Nipple - 1/2'' x 1" Threaded
Called a close nipple because there is no space between the threads. For connecting a 1/2'' ball valve to a union.
$3.89
-
ForgeFit® Stainless Tri-Clamp Elbow | 90° | 1.5"
304-type stainless steel tri-clamp 90° elbow with 1.5" clamp ends.
$28.99
-
Flare Fitting - Washer
You will need this washer anytime you connect flare fittings, except when connecting to our quick disconnects which include a built in washer.
$0.49
-
Vinyl Transfer Tubing | Flexible | Racking | 1 in. ID | 1-1/4 in. OD
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product.
$15.79
-
1/4" Nut & 5/16 Barb
This is a special 1/4" nut and 5/16" barb that will attach to threaded quick disconnects or other 1/4" male flare fittings and allow 5/16" gas tubing to be attached. Stainless Steel barb with a chrome plated Brass nut.
$4.99
-
MPT Stainless Steel Female Quick Disconnect (QD)
When used with the male QD these quick disconnect seal up very well in either flow direction, without a lot of work in connecting them. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Male National Pipe Thread on the ends for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers.
$18.99
-
ForgeFit® Tri-Clamp Gasket | Silicone | 2"
Silicone gasket for 2" tri-clamp connection. Temperature rated from -58°F to 446°F.
$2.99
-
ForgeFit® Stainless Tri-Clamp Rotating Racking Arm | 2"
Stop leaving clean, perfectly good, wine or beer in your tank and always drain from the perfect height with our tri-clover style rotating racking arms. Remove your existing tri-clamp butterfly valve and place this rotating racking arm between the tank and your valve. When it is time to rack off slightly loosen the clamp nearest the tank and use the built-in handle to rotate to just about the lees level. A white rotatable gasket is placed between the welded in tank fitting and this rotating arm. Because the micro finish of the gasket is hard and slippery it allows the rotating arm to rotate in place. A standard black EPDM gasket is placed between the rotating arm and the butterfly valve and is always kept completely tightened. The length of the arm after the elbow is 14" allowing you to draw from roughly 10" above or below the valve level. The arm measures 13.5" from the TC fitting to the elbow. We suggest you assemble the rotating arm and butterfly valve in such a way that the arm is pointed in the same direction as the handle on your butterfly valve. In this manner you always know how the racking arm is positioned in your tank. Manufactured from 304-type stainless steel with a polished finish. 2" tri-clover connection.
$234.99
-
Stainless - 2.5" T.C. x 2" T.C. Concentric Reducer
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Concentric Reducer from 2.5" to 2" clover clamp. 304-type stainless steel.
$35.49
-
Stainless - 1.5" TC x 3/8" Barb
Convert 1.5" Clover to 3/8" Barb for connecting 3/8" ID Tubing.
$17.99
-
Replacement Stopper for Counter Pressure Bottle Fillers
Stopper #2.5 with 3/8" Hole
$3.29
-
Compact Airlock - 2 Piece| Smallest | For Fermentations up to 7 Gallons
If you keep your carboy in a fermentation locker or other area with little to no head space, every inch counts. We love these low-profile 2-piece airlocks for their compact size and simple design. Instead of a floating plastic "hat", the center piece is molded into the lid. One less thing to clean and misplace! This is the very smallest airlock we sell and works well with fermentations up to 7 gtallons. Holds approximately 0.4 fl oz (12 ml) Chamber - 1-1/2" tall x 1-3/8" diameter Stem - 1" long Stopper not included
$2.99
-
Stainless - 2" TC x 2" Barb
Convert 2" tri-clover fitting to 2" long barb for connection of tubing. 304-type stainless steel.
$27.49
-
Gas Manifold - 5/16 in. (Brass)
Manifolds allow you to have one CO2 tank with multiple lines. Each line can be turned off individually without affecting flow to other kegs. Each ball valve contains a check valve that ensures no beer or gas can flow between the two kegs. The barbs are all 5/16", standard for gas line in the beer industry.
$32.99
-
Beer & Gas Tubing Quick Disconnect (QD) - 1/4" MNPT x Male Shut-off
Works with our H550 series Quick Disconnects. This is a male Quick Disconnect with 1/4" MPT on the other side.
$7.99
-
ForgeFit® Stainless Tri-Clamp Sight Glass | 1.5"
1.5" tri-clamp sight glass. Made from 304 stainless steel. Completely disassembles for easy cleaning. Approximately 6.25" long.
$73.49
-
Ultra Barrier™ PVC Free Beer Tubing - 1/2 in.
A highly flexible, environmentally friendly, beverage tubing that is BPA and PVC Free. Ultra-Barrier(TM) Beverage tubing from EJ Beverage is an excellent alternative to PVC. It is constructed of a unique compound that is PVC Free and BPA Free; it contains no DEHP phthalates or other plasticizers. It does not emit dioxins and has extremely low extractables/leachables. This amazing tubing remains flexible at lower temps, has ultra-low permeability, and superior barrier properties. If you want a tubing that won't leach large amounts of chemicals, this is it. Temperature range of -40 to 125F For long draws where you want as little resistance as possible. Technical Specifications: 1/2" line provides .025 lbs of restriction per foot. Ideally pounds of resistance should equal pounds of applied pressure. 1/2" line holds 1 1/3 of an ounce per foot. PVC Free. PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Proven to have no significant impact on taste or flavor Extremely low extractables/leachables High flexibility Remains flexible at lower temperatures Ultra-low permeability Superior Barrier properties Temperature range of -40 to 125° F Working pressure of 33 psi
$12.49
-
EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD
EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 4 mm (5/32") ID size is perfect for home draft applications where only a short beverage line is needed. We recommend using 5-6 ft. per line for adequate flow resistance. This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 4 mm (5/32") Outer Diameter - 8 mm (5/16") PVC, BPA , and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. Kegland Part number: KL06224
$5.39
-
Stopper #2 - Solid
#2 natural latex rubber stopper - solid. Top diameter 20 mm, bottom diameter 16 mm, length 25 mm. 67 stoppers per pound.
$0.79
-
Female Stainless Steel Quick Disconnect (QD) w/ FPT
When used in conjunction with the male QD these quick disconnects seal up completely regardless of the liquids direction of flow, while remaining simple and easy to use. This will work with any of our H503 and H507 series of quick disconnects. However, it does not work in conjunction with any of our plastic or brass quick disconnects. These feature a 1/2" Female National Pipe Thread on the ends for easy connectivity to almost anything. The quick disconnect will hold pressure for typical brewing applications when moving liquids at 60psi or less. 1/2" ID. Gasket temperature range is -40° to 250° F. Open port, does not have shut-off. We designed the original stainless QD's for the brewing industry over 10 years ago. The same manufacturer has been machining them for us ever since. The design has certainly been copied but not with consistent quality. That is why our Stainless QD fittings have a near unanimous 5 star review with retail customers. Please Note: This product will NOT work with our Brass or Plastic Quick Disconnects.
$18.99
-
LinkTech High Temp Plastic Male Quick Disconnect (QD) | 1/2" MPT W/ Shutoff Valve
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Male Plug, which can connect to any H501 Series Female Socket. It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT. This QD is equipped with a shutoff valve. When not connected to another QD, this will not allow any flow. While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Male Plug Quick Disconnect 1/2" MPT Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series
$24.99
-
ForgeFit® Tri-Clamp Gasket | Teflon | 2"
Teflon gasket for 2" tri-clamp connection. Temperature rated from -100°F to 500°F.
$3.99
-
ForgeFit® Stainless Tri-Clamp End Cap | 2"
End cap for 2" tri-clamp fittings. Made from 304 stainless steel.
$6.49
-
Stainless - Full Coupler - 1/2 in.
Full Coupler with 1/2" Female Pipe Thread. Full couplers have threads for insertion from both sides. 304 stainless. Also used to connect fittings. We use with our polysulphone brewing pump, H315 to connect other fittings like quick disconnects. Length is approximately 1.5" Max pressure rating of 150 psi.
$4.39
-
Rubber Stopper - #13 With Hole
#13 stopper - with 3/8 inch hole. Top diameter 2.64 inches (67 mm), bottom diameter 2.28 inches (58 mm), length 1 inch (25 mm). BPA-free stopper made of food grade materials. Injection molded TPE for superior consistency throughout. Perfect for use with carboys, as the material sticks well to glass and PET, even when wet. To create a solid stopper, simply use a #000 solid stopper (FE400) to plug the hole. Max. Temperature Rating: 158 °F (70 °C).
$6.49
-
The OxyWand™ Oxygenation Kit - 0.5 Micron
Use the OxyWand™ to infuse oxygen into your must during the start of fermentation to feed yeast and to reduce volatile sulfur compounds (VSC's) with a process called Macro Oxygenation. It is actually very easy to do. Insert the wand, turn on oxygen, and leave it on only while you punch the cap. After three days or when your wine has reached 10% alcohol stop oxygenating. Yeast use the oxygen as a nutrient to produce healthy cell walls which helps to eliminate issues throughout fermentation. Healthy yeast also produce better flavors and produce less Volatile Sulfur Compounds. You can also actually smell the must become fresher and more fruity while oxygenating as VSC's are driven off. Note that in styles like Syrah and Sauvignon Blanc where sulfur compounds are part of the flavor profile you would want to reduce the amount of Macro Oxygenation in frequency and/or duration. Macro Oxygenation also has the benefits of locking up color and rounding tannins. Want to read more? See our paper on our website at https://morewinemaking.com/ articles/Macro_oxygenation_fer mentation. Kit Includes: Adjustable brass oxygen regulator Sanitary air filter 4 ft of tubing Instructions 26" long 0.5 Micron OxyWand™
$59.99
-
Tubing - Reinforced Vinyl (3/8 in)
Reinforced vinyl is food-grade approved up to 158F. Tubing has a max working pressure of 250 PSI. 3/8" ID
$7.99
-
Stainless Ball Valve - 3/4" Full Port
Our Ball Valves will last for years. Easy to clean. High grade 304-stainless made to last. 3/4" FPT on input and output side. TIP: You can take a ball valve apart using two crescent wrenches. This will allow you to open up the valve to get to the ball and two gaskets that form the seal when closed.
$24.49
-
Cornelius Poppet | Common | Corny Keg Part
These poppets are the most common poppets that we sell and will fit nearly every used keg that we sell.. Technically it is for Cornelious brand "Spartan" and "Super Champion" kegs. This poppet will also fit Cornelius brand Pin Lock "R" kegs. Each keg uses two poppets.
$6.99
-
CMBecker Ball Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality plastic quick disconnect made by CM Becker for your gas line. Flare is 1/4" Tip N' Trick: Sometimes ball lock fittings are a challenge to quick disconnect "on and off" a cornelius keg. We recommend spraying the body connect on the keg first with a sanitizer solution which acts as a lubricant. When applying the ball lock fitting to the body connect, give a twist and turn to make it easier to connect. We've coined this term "Lube and Turn".
$7.29
-
Vinyl Transfer Tubing | Flexible | Racking | 5/8 in. ID | 7/8 in. OD
FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.
$7.89
-
ForgeFit® Tri-Clamp Gasket | EPDM | 3"
EPDM gasket for 3" tri-clamp connection. Temperature rated from -30°F to 300°F.
$2.49
You have seen 144 out of 534 products