Whether you're a professional winery, or are making small batches in your kitchen, hardware parts will be necessary. We offer dozens of hardware parts, from hose clamps to butterfly valves. Any hardware you'll need to make great wine can be found in the categories below!
Wine Making Hardware
Shop By Collection
-
ForgeFit® Tri-Clamp Gasket | EPDM | 4"
EPDM gasket for 4" tri-clamp connection. Temperature rated from -30°F to 300°F.
$3.99
-
ForgeFit® Stainless Tri-Clamp End Cap | 4"
End cap for 4" tri-clamp fittings. Made from 304 stainless steel.
$26.49
-
ForgeFit® Stainless Tri-Clamp Elbow | 90° | 2"
304-type stainless steel tri-clamp 90° elbow with 2" clamp ends.
$35.99
-
ForgeFit® Stainless Tri-Clamp Concentric Reducer | 3" x 2.5"
3" x 2.5" tri-clamp concentric reducer. Made from 304 stainless steel.
$49.99
-
ForgeFit® Stainless Butterfly Valve | 3" T.C.
This 3" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The handle can be rotated 180° for right or left hand operation.
$236.49
-
Tri-Clamp Gasket (Silicone) - 2 in.
Silicone gaskets have a much wider temperature range than EPDM gaskets and are recommended for hot side applications. They are less resistant to acids and caustic chemicals, and may show signs of wear faster than EPDM gaskets. For 2" tri-clamp fittings. KegLand Part Number: KL03438
$2.19
-
Stainless Tri-Clamp Sample Valve Shank | 1.5 in. T.C. x Beer Faucet Shank | Intertap® | NukaTap®
These long shanks are suitable to attach to large commercial fermenters and brite tanks with a 1.5" Tri-Clamp Port. Being removable and completely washable it makes this device extremely easy to clean and sanitize before use. Ideally used with the NukaTap Flow Control Faucet with Self-Closing Spring. Please note standard NukaTap SS Faucet and Self-Closing Spring will not work with this shank. You can use a NukaTap SS faucet, but without the autoclose spring. Also compatible with Intertap, Perlick, and other faucets. Specifications: 2.75" total length Standard shank assembly 1.5" T.C. connection KegLand Part Number: KL19989
$21.99
-
Stainless - Cross - 1/2" FPT
Stainless Cross, all 4 openings are 1/2" Female Pipe Thread. Max pressure rating of 150 psi.
$7.69
-
3 Piece Stainless Ball Valve - 1.5 in. T.C. x 1/2 in. NPT
Stainless steel 3-piece ball valve with tri-clamp connection and 1/2" female NPT out. A great option for T.C. kettles, pumps, and conicals to go from 1.5" tri-clamp to any 1/2" male threaded connection or accessory. Full port for higher flow rate. A seat in the back of the valve allows for the installation of a pick up tube or racking arm.
$27.49
-
Stainless Hex Nipple - 3/4 in. BSP
An excellent upgrade to a standard nipple, these have a hex nut in the center to allow easy tightening and loosening in whatever application it's used! 3/4" male BSP threads. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06460
$4.99
-
Stainless Barb - 3/8 in. Male BSPP x 3/8 in.
This Stainless Steel BSPP barb will connect any tubing with a 3/8" ID line to any fitting with a 3/8" Female BSPP connection. The barb is slightly oversized at 10 mm (0.39") compared to 3/8" (0.37") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06644
$3.29
-
Stainless Barb - 3/4 in. Male BSPP x 3/4 in.
This Stainless Steel BSPP barb will connect any tubing with a 3/4" ID line to any fitting with a 3/4" Female BSPP connection. The barb is slightly oversized at 20mm (0.78") compared to 3/4" (0.75") which will give you a tighter connection with your tubing. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06668
$5.49
-
$2.99
-
Brass Hose - Male Hose x 1/2'' mpt
Useful Part for adapting Garden Hose Thread to standard NPT. Male Garden Hose Thread with 1/2" MPT on the other side.
$7.99
-
Duotight Draft Regulator Board | Gas Manifold | 4 Way
Due to high demand, some of these items are currently out of stock but available for pre-order. Please check status notes below when selecting a size option to see if it is In Stock or tagged as PreBook. We will automatically ship this to you when we receive more inventory. Serve beverages at different pressures without the need for multiple CO2 cylinders, dual body regulators, or expensive gas manifolds Feed a single pressure to the gas board from your regulator and then step down the pressure on each Duotight regulator Use one line for serving ales, another for soda or seltzer water, and another for carbonating a freshly filled keg All parts shown are included and snap together quickly thanks to Duotight push-to-connect fittings and rigid plastic joiners Duotight In-Line Regulators feature built-in pressure gauges that read 0-60 PSI and can be swapped out for different ranges if desired The Duotight Draft Regulator Board is a simple and cost-effective solution to serving beer and other beverages on draft at different pressures. With a standard CO2 tank and CO2 regulator, you can feed gas at a single pressure into the regulator board and then fine tune individual pressure settings for each gas line via the Duotight In-Line Regulators. These regulators feature built-in pressure gauges that make adjustments super simple and check valves are included as standard so you never have to worry about back flow into the regulator. This kit includes everything you need to assemble your regulator board and can be customized so the gas inlet is on the right or left side—whichever makes the most sense for your home draft setup. Duotight push-to-connect fittings and the precut rigid joiners make assembly a breeze and only takes 10-15 minutes! The draft board kit comes in two options—with or without shut off valves. These valves offer peace of mind and allow you to shut off gas flow to any line that is not in use. If you ensure that your system has no leaks, they aren't technically needed, and you can always fully tighten your Duotight Regulator adjustment knob for added protection. But that little extra security might help you sleep easier at night! One advantage of choosing no check valves, however, is that it will leave room at the top of the board to label your gas lines. One of the coolest features of the Duotight In-Line Regulator is that the included pressure gauge can be swapped out for different pressure ranges. The standard gauge reads 0-60 PSI, but if you have one line that will always be used for serving Ales, you can swap to a 0-15 PSI gauge that will be a little easier to read and make precise adjustments. There's also a Digital Pressure Gauge available that provides backlit instant reads and is rated from 0-90 PSI. Need more than 4 gas lines? Check out the 6-Way Duotight Draft Regulator Board. Please Note: Full assembly required. The gas board, regulators, and fittings will arrive loose. Please see our instructions and assembly video below. Stepping Down Pressure The ideal regulation scenario occurs when the inline regulator steps down the output pressure to at least 10 PSI less than the inlet pressure. For example, if the inlet pressure is 30 PSI, the regulator effectively manages a range from 0–20 PSI on the output side ensuring optimal performance and stability. Ideal regulation scenario (10 PSI less than inlet pressure) Example of 30 PSI inlet translating to 0–20 PSI output Kit Includes: 4-Output Gas Board (4) Duotight In-Line Regulators (4) Duotight Check Valves (4) Duotight Shut Off Valves (if selected above) (3) Duotight Tees (1) Duotight Elbow (15) Rigid Plastic Joiners NOTE: All Duotight fittings and rigid plastic joiners come as 8mm OD. Mounting hardware is included for the regulators but not for mounting the board itself to a wall or the inside of your kegerator/keezer. If you select the option without shutoff valves, you will be left with some spare joiners after assembly.
$98.99
-
Gas Tubing Assembly - Pin Lock Quick Disconnect (QD)
Includes pin lock gas in quick disconnect, line and two hose clamps.
$16.99
-
Firestone Poppet | Pin Lock | Corny Keg Part
For Firestone brand Pin Lock kegs. Also fits older John Wood pin lock kegs. Each keg used two poppets.
$17.99
-
Torpedo Keg Dip Tube | Gas In | Corny Keg Part
Replacement Gas In dip tube for Torpedo Kegs. Stainless steel construction, approximately 1" in length.
$3.99
-
CMBecker Inline Check Valve | Quick Disconnect (QD) | Flared
This inline check valve can be used with any gas-in ball lock or pin lock flared disconnect. Allows gas to flow through while preventing the backflow of liquid. Made in Germany and assembled in the USA by CM Becker.
$9.99
-
High Temp™ PVC Free Tubing - 3/8 in.
EJ Beverage High Temp tubing is perfect for use on the hot side of your brewing system. When compared with traditional Silicone this tubing is less likely to kink at higher temperatures. It is constructed of TPE (Thermoplastic Elastomer), which is an excellent alternative to high temperature PVC and Silicone. The advantages to this high temperature tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 3/8” ID x 5/8” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 54 psi Working pressure of 18 psi
$10.49
-
Brass Hose - Male Quick Disconnect (QD)
This is the male side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Female Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.
$6.99
-
Stainless Steel Camlock - Female Cam X 1/2 in. Male (Type B)
Type B Camlock Fitting. Female Camlock with 1/2" Male BSP. Camlocks are considered by many to be the superior quick connect fitting. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04480
$15.49
-
Stainless Tri-Clamp | 2" T.C. x 3/4" Female BSP
Convert 3/4" BSP fittings to 2" tri-clamp. Made from 304 stainless steel. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. Kegland Part Number: KL10641
$16.49
-
CIP Spray Ball | 4" x 1.5" Tri-Clamp
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. This stainless steel CIP spray ball kit is perfect for homebrew conical fermenters as many popular units out there feature a 4" T.C. top port or clamp-on lid with 4" T.C. ferrule. Tri-clamp gasket not included. Kit Includes: 4" T.C. Cap with 1.5" T.C. x 1" BSP Male Thread connections 1" BSP x CIP Spray Head Requires pump with 12 GPM flow rate KegLand Part Number: KL22989
$65.99
-
Stainless Bushing - 3/8 in. x 1/2 in. BSP
3/8" female x 1/2" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06576
$3.29
-
1/2 in. OD Stainless Steel Blowoff Cane
1/2 in Stainless Steel Blowoff Cane Specifications: Stainless steel 1/2 in outer diameter 7/16 in inner diameter (approximately) 19 in Tall x 7.5 in Wide
$24.99
-
Pressure Gauge (RHT) | High Pressure (0-3000 PSI) | CO2 or Nitrogen Regulator | 1/4" MPT Right-Hand Thread
3000psi gauge tells tank pressure. Right hand thread replacement gauge for most brands of regulators.
$16.49
-
KOMOS® 2.5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Brand new aluminum 2.5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 2.5 lb tank because it holds 2.5 lbs of compressed (liquified) CO2. 2.5 lbs of CO2 is enough to dispense about 4x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 14.75" T x 4.375 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$72.99
-
Gas Add On Assembly - Ball Lock Quick Disconnect (QD)
Use this assembly to tee off from your CO2 system to add another keg to your existing draft system. Includes a Ball lock gas in quick disconnect.
$16.49
-
CMBecker Pin Lock Quick Disconnect (QD) | Beverage Out | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality fitting made by CM Becker in Germany. Red body with black top. 3 pin. 1/4'' male flare fitting.
$7.99
-
KegLand Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | Barbed
This is a ball-lock type quick disconnect that is constructed from stainless steel for lifetime longevity. 1/4" barb. This QD is for the Bev Out side. See here for the Gas In QD. 2 1/8" H Please note: the outer bushing on the disconnect is made from chrome-plated brass. All parts that come into contact with liquid are stainless. Kegland Part Number: KL02998
$18.99
-
Connecting Kit For OxyWand™
If you already have an OxyWand™, this connecting kit includes all hardware necessary to connect your OxyWand™ to a disposable oxygen tank. Control the flow of oxygen with the adjustable oxygen regulator, and gives you piece of mind that sanitary oxygen is feeding your yeast thanks to the inline sanitary oxygen filter. Four feet of tubing along with 26" of OxyWand™ gives you access to hard to reach fermenters. Includes: Adjustable Brass Oxygen Regulator Sanitary Inline Oxygen Filter Four Feet of Tubing Instructions for use Please Note: This kit does not include the OxyWand™ itself. For a complete oxygenation system using the OxyWand™, Search for related items!
$44.99
-
CMBecker Ball Lock Quick Disconnect (QD) | Built-In Check Valve | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This disconnect has an internal check valve that will allow the gas to flow out, but won’t allow backflow of liquid back into your system. Internal Check Valve protects your system from liquid back flow! Made in Germany and assembled in the USA by CMB. Extremly high quality for years of service. NSF Approved for Food Grade Service!
$15.99
-
Stepless Hose Clamps - 1/4 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 1/4" OD tubing (6-8 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06675
$10.99
-
Stepless Hose Clamp - 7/16 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 7/16" OD tubing (10.5-12.5 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL0669
$10.99
-
EVABarrier Double Wall Draft Tubing - 3 mm ID x 6.35 mm OD
EVABarrier Draft Tubing in 13 ft. Length is now available for pre-order. Place your order now and we will automatically ship it to you when it's available. The current estimated availability is early 2025. EVABarrier double wall tubing is an excellent choice for all draft dispensing applications. The inner barrier is an excellent gas barrier, keeping oxygen out and CO2 in. The inner wall is also extremely smooth to prevent bacteria and other microbes from attaching to the inside surface. The outer barrier gives the tubing a decent stiffness while still remaining pliable. This makes EVA Barrier remarkably kink resistant and the perfect choice for use with Duotight, John Guest, and other push-in fittings. The 3 mm (1/8") ID size is perfect for mobile draft applications or home draft systems where only a short beverage line is needed. Lengths of 3.2 ft. per line are all that you'll need for adequate flow resistance. This tubing works seamlessly with Duotight Gas In and Bev Out Ball Lock QDs which allow you to connect your draft lines directly to your ball lock homebrew keg. Be sure to select the correct size QD fittings that correspond to your tubing's outer diameter (OD). Specifications: Inner Diameter - 3 mm (1/8") Outer Diameter - 6.35 mm (1/4") PVC, BPA, and Plasticizer Free* Stiff outer wall is kink resistant and easy to use with Duotight fittings Smooth inner wall prevents oxidation, CO2 loss and microbial growth build-up *EVABarrier does not contain plasticizers, or phthalates, that are used to make PVC flexible. These plasticizers are known to leach out into the beer over time and have adverse health effects. KegLand Part number: KL25331
$10.99
-
Brass Hose - Female Quick Disconnect (QD)
This is the female side of the Garden Hose Quick Disconnects. This set enables you to quickly and efficiently connect and disconnect lines from your Wort Chiller, Water Filter, or whatever else you feel could be improved through quicker connections! This product is designed to work in conjunction with our Male Garden Hose Quick Disconnect. Please Note: This product will NOT work with our Stainless or Plastic Quick Disconnects.
$12.99
-
LinkTech High Temp Plastic Female Quick Disconnect (QD) | 3/8" Barb w/ Shutoff Valve
The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects. These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path. O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug. It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing. This QD is equipped with a shutoff valve. When not connected to another QD, this will not allow any flow. While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages. These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems. The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 3/8" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series
$25.99
-
Stainless - Tri-Clamp Tee (2")
304-Polished Stainless tee with 2" tri-clamp connections.
$40.99
-
Stainless - 2 in. T.C. Check Valve (1 PSI)
This is a Stainless Steel one way Check Valve. It has 2" T.C. Fittings on either side, and releases pressure at ~1 p.s.i. Can be used to inhibit a siphon in certain applications, or to vent gas pressure in a tank.
$109.99
-
ForgeFit® Stainless Tri-Clamp Extension Tube (Spool) | 1.5" T.C. | 12" Long
304-type stainless steel tri-clamp extension tube with 1.5" clamp ends. 12" long.
$28.99
-
ForgeFit® Stainless Tri-Clamp End Cap Reducer | 4" x 1.5"
4" x 1.5" tri-clamp reducer. Made from 304 stainless steel.
$52.49
-
ForgeFit® Stainless Tri-Clamp Hose End | 1.5" Barb x 1.5" T.C.
This ForgeFit oversized barb hose end is intended for use with 1.5" professional beverage tubing. This is the same fitting we use on our pre-fabricated beverage hose assemblies. When designing this fitting, we made sure it has all the features we wanted in a barb intended for professional applications. The hose barb has a shoulder to keep the hose from creeping up towards the fitting end. The long barb promotes solid engagement with the hose and the end has a gentle internal taper to transition the product flow smoothly from the fitting to the tubing. 1.5" tri-clamp connection with 1.52" OD 3.49" long barb. Overall length 4.95". 3A certified 304 stainless.
$24.99
-
Tri-Clamp Gasket with Stainless Mesh Screen | 16 Mesh | Teflon | 2"
Teflon gasket with 304 stainless mesh screen for 2" tri-clamp connections. Can be used as a filter screen to trap large particulates passing through T.C. fittings. Often used for distillation to retain activated carbon for filtering neutral spirits or used in pot distillation to retain botanicals in the vapor stream. The screen has a mesh size of 16 which will block particles larger than 1.19mm or 1190 microns. This mesh size makes this screen ideal for use in a filer setup with activated carbon. Kegland Part Number: KL30496
$7.19
-
$5.49
-
Garden Hose Coupler - 3/4 in. GHT
3/4" female garden hose thread x 3/4" female garden hose thread. Maximum temperature rating - 195°F.
$11.99
-
Stainless Plug - 1/2 in. BSPP
1/2" male BSPP stainless steel plug. Hex head design for easy installation or removal with a wrench. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL06408
$2.79
-
$4.99
You have seen 384 out of 530 products