Whether you're a professional winery, or are making small batches in your kitchen, hardware parts will be necessary. We offer dozens of hardware parts, from hose clamps to butterfly valves. Any hardware you'll need to make great wine can be found in the categories below!
Wine Making Hardware
Shop By Collection
-
Beer & Gas Tubing Quick Disconnect (QD) - 3/8" Barb x Female Shut-off
These quick disconnects feature 3/8" barbed fittings which can be used with 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The internal valve spring is 316 type stainless steel and the o-ring is food grade buna-n. This is a direct replacement to the Female Quick Disconnect with 3/8" Barbs that is featured on the BrewBuilt CoolStix™.
$10.99
-
Stainless - 2" T.C. x 1" MPT
Adapts 2" Tri-Clover fitting to 1" Male Pipe Thread. 304-type stainless steel.
$30.99
-
ForgeFit® Stainless Butterfly Valve | 2" T.C.
This 2" Tri-Clamp Butterfly Valve features stainless steel construction and 7-position handle. The stainless steel handle can be rotated 180° for right or left hand operation.
$93.49
-
Stainless Tri-Clamp Sight Glass | 1.5"
Monitor fermentation activity in a stainless steel conical Check flow and liquid clarity during transfers Harvest yeast and store with end caps Keep an eye on the flow during transfer or monitor yeast activity during fermentation with this 1.5" tri-clamp sight glass. Place the sight glass in-line when you transfer wort from kettle to fermenter to help you oversee how your in-line oxygenator is flowing. One of the few disadvantages of a stainless steel conical is that you can't watch the yeast as they go to work. With a sight glass you'll be able to observe how your yeast are performing throughout the fermentation process. This also makes for a great way to harvest yeast. Simply attach it to your dump valve and close off the other end with a T.C. end cap, collect the yeast and remove the sight glass, cap it at the other end and store it for your next batch. 1.5" tri-clamp Approximately 6.25" long Max Pressure: 120 PSI Max Temperature: 300°F Made from 316 stainless steel KegLand Part Number: KL01816
$43.99
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 90 cm Diameter
Replacement air tubes for variable capacity tanks. 90 cm tube fits LA Inox 800-1000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$54.99
-
3/8 in Stainless Steel Blowoff Cane
Tired of clogged airlocks from your intense and vigorous fermentations? Simply place one end in your stopper instead of your airlock and the other end into a bucket of water or sanitizer and worry no more. Made from stainless steel, making it durable and easy to clean. Specifications: Stainless steel 3/8 in inner diameter 18 in Tall x 7 in Wide
$19.99
-
Replacement Pressure Relief Spring - 20 PSI
20 PSI replacement spring for pressure relief valves. All SS, works with our D1830, as well as a replacement for our Counter Pressure Bottle Fillers.
$3.59
-
Replacement Kegland CO2 Tank Knob
Replace a broken knob on your CO2 tank, or keep one on hand as a spare. Fits on Kegland CO2 tanks. This is the knob only. Does not included CO2 tank or any related hardware. KegLand Part Number: KL30625
$5.49
-
KOMOS® 5 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Brand new aluminum 5 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 5 lb tank because it holds 5 lbs of compressed (liquified) CO2. 5 lbs of CO2 is enough to dispense about 8 to 9x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 18" T x 5.25 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$89.99
-
Keg Lid Foot
The foot for the swing arm on the keg lid. They are often missing on used kegs.
$1.49
-
Body Connect - Pin Lock Quick Disconnect (QD) Gas-In (2 pins)
Replacement pin lock gas in body connect for pin lock kegs. Also called a post. Has 2 pins for securely locking a Pin Lock gas quick disconnect into place. Does not include poppet. 9/16-18 UNF threads.
$10.99
-
Body Connect - Pin Lock Quick Disconnect (QD) Beer Out (3 pins)
Replacement pin lock beverage out body connect for pin lock kegs. Also called a post. Has 3 pins for securely locking a Pin Lock beverage out quick disconnect into place. Does not include poppet. 9/16-18 UNF threads.
$10.99
-
Pin Lock Socket
We made this socket so that you can easily remove gas and beverage body connects on Pin Lock style kegs. (Currently a 3/8" drive)
$29.99
-
Ball Lock Post Bulkhead - Bev Out
This bev out ball lock bulkhead assembly allows you to add a ball lock post just about anywhere. Use in conjunction with the gas in bulkhead to create your own pressure vessel. The included short dip tube can be replaced with a longer dip suitable to your needs. 1/4" BSP threads and locking nut. Kegland Part Number: KL03162
$14.49
-
Low2 Keg Lid O-Ring | Corny Keg Lid O-Ring | Superior Oxygen Barrier Properties
96% reduction in oxygen ingress compared to silicone O-rings when measured in a keg! Made from a special blend of materials, these gaskets offer vastly improved oxygen barrier properties compared to Silicone or EPDM Give your beverage the absolute best protection from oxygen staling with KegLand's Low2 O-rings! The result is your beverage staying fresher for longer! Compatible with any ball lock or pin lock corny-style keg with standard lid Upgrade the storage life of your beer by replacing your standard keg lid O-ring with the new Low2 O-ring from KegLand. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Compatible with any ball lock or pin lock corny-style keg with a standard size lid. Not compatible with Megamouth Torpedo Kegs. Low2 O-rings were independently tested by GunnLab, an Australia-based plastic packaging testing laboratory. See below for a printout of the test results. KegLand Part Number: KL03063
$4.39
-
Torpedo Keg | Ball Lock Keg | Stainless Steel Corny Keg | Low2 Keg Lid O-Ring | Superior Oxygen Barrier Properties | 6 Gallon
Oversized corny keg, great for bigger batches and fermentation Low2 lid O-ring reduces oxygen ingress by 96% compared to silicone O-rings when measured in a keg! Brand new, all-stainless construction ball lock keg Stackable with ball lock quick disconnects in place Etched In and Out labels near the keg posts for easy identification Rolled handles for a comfortable grip Made by an ISO certified commercial keg manufacturer with high-quality laser welded seams Set your sights on a brand new Torpedo Keg! The patented, D794,899, sleek all-stainless design represents the pinnacle of quality in ball lock homebrew kegs. With features like welded stainless handles, the ability to stack with fittings in place, amazing quality and a great price we think these kegs will become the standard by which other kegs are measured. Quality First The first thing we at MoreBeer! check out is interior welds. We've spent a decade rejecting kegs made overseas because the interior welds have never met our standards. If a weld is not perfect and shows evident burn marks along with nooks and crannies it cannot be sanitized effectively. These kegs are machine welded and exceed our standards for quality. The weld quality is possible because these kegs made by an ISO certified commercial keg manufacturer. Cool Features Torpedo Kegs were designed to stack with Ball Lock quick disconnects in place and serving which is a cool feature for some brewers who have vertical space in their refrigerator. We also like the rolled stainless steel handles. They are comfortable to grab and will never come off like some rubber handles can over time. In and Out is etched near the keg posts for easy identification which is very handy when you are connecting lines in a refrigerator or kegerator and trying not to make a mistake. Stainless Fermenter We've seen a lot our customers having great success using the 6-gallon Torpedo Keg as a stainless steel fermenter or "kegmenter". The extra headroom that this size offers makes it a great option for fermenting 5-gallon batches. We highly recommend using CellarScience Foam Axe if you're fermenting in the keg. Foam Axe will help reduce krausen buildup, cutting down the chance of clogging issues with the ball lock poppets and the PRV in the keg lid. It should also be noted that leaving your finished beer on the leftover trub from fermentation for too long will eventually lead to off-flavors. If it won't be consumed in 2-3 weeks, transfer your beer to a fresh keg using the Torpedo Keg Buoy which will pick up the clearest beer and leave the sediment behind. Low2 Keg Lid O-ring Give your beverage the absolute best protection from oxygen staling with the Low2 keg lid O-ring. Even the most perfectly sealed keg is susceptible to oxygen ingress through the hatch O-ring—yes, even if the keg is under constant pressure with CO2! Even a leak-free, pressurized keg will release CO2 molecules as they pass through the lid O-ring itself, and conversely, Oxygen molecules will permeate through the O-ring and diffuse into the keg when they reach the surface area on the other side. The level of permeability is wide ranging and highly dependent on what material the O-ring is made from. Rather than the usual EPDM or Silicone, Low2 gaskets are made from a unique composition of Synthetic M-Class and Cross-Link Elastomers. This special blend has superior oxygen barrier properties that results in your beverage staying fresher for longer. Specifications: Max Pressure: 130 psi PRV Rating: 85 psi High Quality Laser Welded Seams ISO9001 Quality Assurance Made from 304 Stainless Steel Dimensions: 27.15" H x 9" D
$159.99
-
Stepless Hose Clamp - 3/4 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 3/4" OD tubing (17-20 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06736
$10.99
-
Beer & Gas Tubing Quick Disconnect (QD) - 3/8 in. Barb x Male QD
Plastic quick disconnect with 3/8" barb which can be used with either 1/4", 5/16" or 3/8" line. The quick disconnect functionality is activated by a shrouded thumb latch on the female QD. The temperature range is -40F to 180F. They can handle a vacuum to 120 psi - so you need not worry about them leaking gas. The o-ring is food grade buna-n. This is a non-valved QD. It does not have an internal shut-off like H550A. For the female side, see our H550B.
$5.99
-
ForgeFit® Stainless Tri-Clamp Sight Glass | 2"
2" tri-clamp sight glass. Made from 304 stainless steel. Completely disassembles for easy cleaning. Approximately 6.5" long.
$92.49
-
ForgeFit® Stainless Tri-Clamp | 4" Clamp
The most popular choice for sanitary connections, tri-clamp fittings are widely used in the food & beverage industry due to their ability to be cleaned in place. Tri-clamps join two fittings together without any nooks or crannies for contaminants to hide. Use anywhere you want to ensure a sanitary connection. 4" tri-clamp Made from 304 stainless steel
$17.49
-
ForgeFit® Tri-Clamp Gasket | EPDM | 2.5"
EPDM gasket for 2.5" tri-clamp connection. Temperature rated from -30°F to 300°F.
$1.49
-
Stainless Ball Valve - 1/2" - 3 Piece
Heavy duty ball-valve that can be taken apart for easy cleaning. 1/2" female pipe thread inlet and outlet. Made from 304-type stainless steel. Please note that while we sell plenty of these valves we consider our H602 2-piece ball valve easier to take apart and just as easy to sanitize.
$29.99
-
Stainless Nipple - 1/4" x Close
Stainless Nipple - 1/4" x Close Overall length - 7/8"
$3.99
-
Brass Hose - Male Hose x 1/2'' Barb
Male Garden Hose Thread on one side, 1/2" OD Barb on the other. Useful for setting up your wort chiller and water filter.
$9.49
-
Vinyl Air Tube for Marchisio Variable Volume Tanks | 100 cm Diameter
Replacement air tubes for variable capacity tanks. 100 cm tube fits Marchisio 1000-2000 Liter tanks. Please note: These tubes are only compatible with Marchisio brand tanks. They will not work with Speidel or other brands of variable volume tanks.
$54.99
-
CO2 Regulator Stem O-Ring (2 Pack)
Silicone regulator stem o-ring. For regulators such as the D1060 & D1065, which have an o-ring located where the regulator stem mates with the CO2 cylinder. Pack of 2.
$3.99
-
KOMOS® 20 lb CO2 Tank | Premium Aluminum | New | CGA320 Valve | US DOT Approved
Brand new aluminum 20 lb CO2 tank made from high strength aluminum alloy and high quality CGA320 valves. Because it is made of aluminum rather than steel you can feel confident that it won’t rust. It’s called a 20 lb tank because it holds 20 lbs of compressed (liquified) CO2. 20 lbs of CO2 is enough to dispense about 40x 5-gallon kegs of homebrew. Aluminum tanks are superior to steel because they do not rust. All tanks are shipped empty. To have tanks filled you will want to visit your local welding supply shop. Because you are purchasing a new tank you can choose to either have it filled or to exchange it for a filled tank at your local gas supplier. If you have this tank filled the local gas supplier is responsible for affixing the correct neck label that identifies the gas being put in the cylinder. Tanks should always be stored in an upright position. Features: Made from corrosion resistant, engineered Aluminum Brushed finish Thick, durable cylinder walls 27.5" T x 8 Ø DOT approved New high quality CGA-320 valve Light weight compared to steel tanks
$199.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Beverage Out | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality fitting made by CM Becker in Germany. Red body with black top. 3 pin. 1/4'' barb fitting.
$7.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Flared | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality fitting made by CM Becker in Germany. Red body with gray top. 2 pin. 1/4'' male flare fitting.
$7.99
-
KOMOS® CO2 Regulator to Nitrogen or Argon Tank Adapter | CGA320 Male Thread by CGA580 Male Thread
With this adapter you can use a KOMOS CO2 regulator with a Nitrogen or Argon tank. Not all CO2 Regulators are suitable for use with a Nitrogen tank. Only for use with KOMOS regulator which is a dual gas regulator capable of handling Nitrogen and CO2 gasses. CGA320 male thread by CGA580 male thread. Compatible with KOMOS Dual Gauge and Dual Body regulators.
$24.99
-
Stepless Hose Clamp - 5/16 in. - 3/8 in. OD Tubing (20 Pack)
These stainless stepless clamps tighten in an exact circle, making them ideal for use with draft lines. Suitable for 5/16" to 3/8" OD tubing (7-10 mm OD). Comes in packs of 20 clamps. Stepless Clamp Tool sold separately - H1006 Kegland Part Number: KL06682
$10.99
-
High Temp Silicone Tubing | Reinforced | 3/8" ID
The construction of braided silicone enables the tubing to handle increased pressure applications. Reinforced silicone offers outstanding resistance to temperature extremes and is made from FDA-sanctioned ingredients. The flexible design and construction of this tubing allows excellent bend radii and permits installation in restricted spaces without impeding flow. 3/8" inner diameter, 5/8" outer diameter Open mesh polyester braiding incorporated within the wall of silicone tubing Made from FDA-sanctioned ingredients Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -40°F to 392°F (-40°C to 200°C) Odorless, tasteless, and inert Working Pressure: 94 psi Burst Pressure: 275 psi Platinum cured Conforms to FDA CFR 177.2600, NSF
$46.49
-
High Temp™ PVC Free Tubing - 1/2 in.
EJ Beverage High Temp tubing is perfect for use on the hot side of your brewing system. When compared with traditional Silicone this tubing is less likely to kink at higher temperatures. It is constructed of TPE (Thermoplastic Elastomer) which is an excellent alternative to high temperature PVC and Silicone. The advantages to this high temperature tubing are: PVC & BPA Free. Contains no DEHP phthalates or other plasticizers High temperature up to 135° C (275° F) Extremely low extractables Extremely low leachables High flexibility Remains flexible at high temperatures Ultra-low permeability Barrier properties 1/2” ID x 3/4” OD Environmentally friendly production - does not emit dioxins Burst Pressure = 63 psi Working pressure of 21 psi
$16.49
-
Stainless Tri-Clamp | 2" T.C. x 3/4" BSPP Female
Convert 3/4" BSPP (Straight Thread) fittings to 2" Tri-Clover.
$28.99
-
Stainless - 4 in. T.C. x 2 in. T.C. Concentric Reducer
Stainless steel Tri-Clamp reducer going from 4" T.C. to 2" T.C. Kegland Part Number: KL06156
$54.99
-
ForgeFit® 2 in. Butterfly Valve Gasket
Replacement gasket for the ForgeFit® 2" butterfly valve. We recommend replacing your butterfly gasket at least every 3 years. If you wait until you have a leak, your valve has already been unsanitary for some time.
$24.49
-
Stainless Tri-Clamp | 1.5" T.C. x 1/2" BSP Female
1.5" tri-clamp with 1/2" BSP female threads. Made from 304 stainless steel. This adapts the beer-in for the Canular KEG500 to TC. BSP vs. BSPP BSP (or BSPT) fittings have a tapered thread and require teflon tape to form a seal between the male and female fitting. BSP fittings are generally intended to be used with their counterpart of the same thread type. ONLY 1/2" BSP fittings are compatible with US-standard NPT fittings of the same size. BSPP fittings, on the other hand, have a straight thread, require a gasket seated inside the female fitting to form a seal, and are not compatible with NPT. KegLand Part Number: KL25362
$16.49
-
Stainless - Full Coupler - 1/2 in.(BSPP)
Full Coupler with 1/2" Female British Standard Pipe Parallel Thread. Full couplers have threads for insertion from both sides.
$5.49
-
Stainless Bushing - 1/2 in. x 3/4 in. BSP
1/2" female x 3/4" male BSP reducing bush. Made from 304 stainless steel. Kegland Part Number: KL06583
$4.99
-
Brass Hose - Female Hose x 1/2'' fpt Swivel
Female Garden Hose Thread on one side, 1/2" FPT on the other. Useful piece for adapting Quick Disconnects to Wort Chillers or Water Filters.
$3.89
-
Marchisio Stainless Steel Spigot | 1/4 Turn Ball Valve | 1/2 in. BSP
Stainless steel spigot with quarter-turn ball valve. 1/2 in male BSP threads.
$29.99
-
Add On Assembly For Gas Manifold
So you had the great foresight to buy our modular gas line manifold and now you are adding a keg. You need gas on that keg. No problem, use our add on assembly to expand your existing manifold. Includes a shut off check/ball valve, one tee and a connecting nipple.
$15.49
-
Firestone Poppet | Ball Lock | Corny Keg Part
For Firestone brand ball lock kegs. It will fit the Firestone V Challenger, VI Challenger and Super Challenger kegs. Each keg used two poppets.
$15.99
-
CMBecker Pin Lock Quick Disconnect (QD) | Gas In | Barbed | High-Quality Plastic QD | NSF Registered | Made in Germany | Assembled in USA
This is a high quality fitting made by CM Becker in Germany. Red body with gray top. 2 pin. 1/4'' barb fitting.
$7.99
-
Stainless Steel Camlock - Male Cam X 1/2 in. Female (Type A)
Type A Camlock Fitting. Male Camlock with 1/2" Female BSP. Camlocks are considered by many to be the superior quick connect fitting. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04503
$9.89
-
Stainless Steel Camlock - Male Cam X 1/2 in. Barb (Type E)
Type E Camlock Fitting. Male Camlock with 1/2" Barb (13mm). Camlocks are considered by many to be the superior quick connect fitting. They have a higher working pressure and hold a tighter seal than quick disconnect fittings, making them less likely to leak while in use. Locking and unlocking the female pieces may require two hands, but it's a small price to pay for long-lasting reliability. 304 Stainless steel construction. 150 psi working pressure. Kegland Part Number: KL04527
$8.79
-
Replacement Gasket for Female Stainless Steel Quick Disconnect (QD)
Replace the worn-out gaskets on your stainless quick disconnects. Temperature rated from -40° to 250°F.
$1.09
-
Stainless Tri-Clamp - 3 in. Elbow
A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the brewery or winery when connected. 304-type polished stainless.
$60.99
You have seen 336 out of 530 products