Beer Making

Classic cider yeast that ferments dry, but retains the flavor from apples. PurePitch® Next Generation—now with more yeast, get a foolproof fermentation without a starter! Just twist the cap & pitch! Everything you missed about the vial with the innovation of PurePitch®. Flocculation: Medium Alcohol Tolerance: 15%+ ABV Optimum Fermentation Temp: 68-75°F Cell Count: 150 Billion For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.

Read more less

This 2" replacement gasket is intended for use with the KegLand Ball Lock Adapter Tapping Head for Sanke Kegs (KEG870). It only has the bead on one side of the gasket and the other side is flat. This gasket can also be used to directly clamp on an AlcoEngine Still Top to a compatible lid with 2" tri-clamp ferrule. It is not intended to be used as a replacement gasket for standard tri-clamp fittings. KegLand Part Number: KL99895

Read more less

Stainless steel splicer fitting for joining different sizes of tubing. Recommended for splicing 3/16" or 1/4" ID tubing to 3/8" or 1/2" ID tubing. One end is slightly undersized at 6 mm (0.24") and the other is slightly oversized at 13 mm (0.51"). Made from 304 stainless steel.

Read more less

Replacement O-ring kit for Blichmann RipTide™ pump.  

Read more less

Dip tube o-rings compatible with all homebrew ball lock or pin lock kegs. Slide the o-ring onto the dip tube and then place the dip tube back in the keg. Comes in a convenient zip lock bag.  

Read more less

24V pump updated replacement pump for the Keg Washer with silicone pump cover

Read more less

The BlowTie 2 Spunding Valve complete kit is used to release excess pressure on a pressurized fermenter or from a keg while doing pressure transfers. Thanks to the large surface area of the diaphragm, this style spunding valve is much more accurate than the poppet style. The blow off pressure can be easily set using the BlowTie's integrated pressure gauge. The kit includes everything you'll need to use the spunding valve right out of the bag. The BlowTie 2 can also be upgraded with a Digital Mini Pressure Gauge. Kit Includes: BlowTie 2 w/ Integrated Pressure Gauge (0-15 psi) CM Becker Gray Ball Lock Disconnect Duotight Flare Fitting 8 mm OD Rigid Plastic Joiner  

Read more less

A good sized Scoop, perfect for grain, other ingredients, or chemicals.  

Read more less

2.3-3.0 °L - Fawcett Malting - Promise is a Pale Ale Malt grown in Scotland. It produces a sweet, mellow wort and is excellent for both brewing and distilling. Malt Specification: Moisture % - max. 4 Extract fine % dm - min. 80 Color °L - 2.3 - 3.0 Protein % dm - max. 8.5 - 10  

Read more less

7.9 °L - Great Western - Produced in the traditional European manner of 'stewing' germination then kilning at high temperatures. Emphasis on higher-protein 2-Row barleys, to achieve high levels of protein solubilization and color formation. Malt Specification: Moisture % - max. 4.4 Extract fine % dm - min. 77 Color °L - 7.9 Protein % dm - max. 12  

Read more less

3.5-4.2 °L - BestMalz - Provides full maltiness and some color, often with a nutty flavor. Used in European amber, golden and brown lagers as well as Marzen and Oktoberfest beers. Can be used 100% of the grist. Malt Specification: Moisture % - max. 5 Extract fine % dm - min. 76 Color °L - 3.5 - 4.2 Protein % dm - max. 12  

Read more less

The Mighty Mill 2 Roller Grain Mill features 304 stainless steel adjustable rollers, 7-pound aluminum grain hopper, and included base board with mounting hardware. Easily operate with the rotating crank handle, or remove the handle and operate with an electric power drill. Adjustable rollers have a gap setting range from 0.025" to 0.1". Please note: This mill is designed for use with brewing grains only. It will not work for cracking whole kernel corn.

Read more less

Replacement tube only for BrewZilla Polycarbonate Sight Glass. Fittings are not included. 15.25" long. 5/8" OD  

Read more less

LalBrew Wit yeast is a relatively neutral strain which can be used to produce a wide variety of wheat beer styles. Ester and phenol production is lower than for traditional hefeweizen strains such as Munich Classic. LalBrew Wit provides a baseline profile of banana and spice aromas, but leaves space for the brewer to showcase other spice additions typical of Belgian style beers. Traditional styles brewed with this yeast include but are not limited to Belgian Witbier, American Wheat, Berliner Weiss, Gose, Hefeweizen, Dunkelweis, and Weizenbock . Beer Styles: Wheat beers Aroma: Fruity, slight banana and clove Attenutation: Medium to High Fermentation Range: 63-72°F Flocculation: Low Alcohol Tolerance: 12% ABV

Read more less

The Flat Twister Lid comes with 3 pre-drilled holes perfectly sized for the Duotight bulkheads that come with the Temp Twister Cooling Coil and FermZilla Thermowell. Lid o-ring included. This lid is only recommended for FermZilla users that will be using the Temp Twister and the Thermowell together. Kegland Part number: KL15059  

Read more less

Unlock the FermZilla's true potential with the FermZilla Pressure Kit. This will enable fermenting under pressure, carbonating, and serving without ever needing to move beer out of the fermenter. The kit inlcudes two plastic female threaded ball lock fittings with barbs, which thread onto the existing openings atop the FermZilla's lid. A silicone dip tube with stainless steel float work as the beverage out, allowing only the clearest beer from top of the tank to be dispensed. The Pressure Kit will turn the FermZilla into a true unitank! Includes one red and one yellow ball lock cap to help differentiate which one is being used for liquid and which one for gas. Either color can be used for either function. The silicone dip tube is 31" long. It will work perfectly as is for the 55L FermZilla. For the 27L model we recommend cutting the dip tube shorter to remove unwanted slack. With the optional Floating Dip Tube Filter, you can prevent hop material and other solids from ever entering the dip tube. Especially handy when you're pulling samples mid-fermentation! Key Features: Ferment beer under pressure to reduce ester and fusel alcohol production Always draw clear beer with the floating dip tube Keg beer that has already been carbonated Use CO2 to push beer into a keg or through a filter into a keg Eliminate kegging altogether by carbonating and serving directly from the FermZilla Installation Note: For best performance, ensure there is not an excess amount of slack when the silicone dip tube is installed and shorten it if needed. With the floating dip tube installed on your empty FermZilla, you ideally want the dip tube to hang freely with just enough length for the end of the dup tube to touch the bottom of the tank. Please note: pressure kit does not include the lid pictured in the example photo. The ball locks and floating dip tube are installed on the FermZilla's existing lid.

Read more less

Temperature control is a very important part of fermentation for optimal flavor and control and quality of the finished beer. With the ANVIL cooling system, you wont be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or a glycol chiller, and if desired an insulation jacket for your carboy.   System Includes: Sanitary Stainless Steel Cooling Coil 12" Sanitary Stainless Steel Thermowell 4 Hole #7 Stopper Submersible Pump - 12V DC Max Head - 16 ft  Cooling Hose  Controller Airlock Anvil Temperature Controller  

Read more less

Eliminate oxidation in your bottling process with the XF460HP volume-based filling system Made specifically for high proof spirits, featuring components with better resistance to high concentrations of ethanol Liquid is pulled from your barrel or storage tank by the built-in self-priming pump Filling volume is programmed and stops automatically Optional gas flush system Made to order in the United States Eliminate oxidation in your bottling process by using the XpressFill volume-based filling system! The XF460HP four bottle filler is now available specifically for High Proof Spirits. Susceptible components have been replaced with material more resistant to higher concentrations of ethanol.  The XF460HP can easily accommodate very small to very large bottles with its adjustable shelf, allowing great flexibility.  Easy to use, compact in design, precise volume filling, high quality components, hand-crafted in the USA. Gravity-based systems usually involve spirits being transferred to a holding tank, and unless your bottles and holding tank are pre-flushed with inert gas, some degree of oxidation is inevitable. Xpress Fill bottling systems have a closed pathway with a self-priming pump. They also have as an optional built-in sparging (pre-flushing) system that uses Nitrogen or Argon to pre-flush your bottles. To use, place four bottles under the filling spouts, push the gas button (optional at additional cost) to flush the bottles with inert gas. Then hit the Fill button which pulls the spirit from your barrel or stainless storage tank, distributes 750ml of spirit to each bottle, and shuts off automatically when done. It is truly that simple. Each fill cycle lasts 20 seconds. When using 750ml bottles you can expect to fill about 450 bottles per hour. There is also a manual mode allowing you to top up bottles or fill odd size bottles. The four spout filler features a 3/8" inlet. Features: Made to order in the USA 4 Spout fills approximately 250 bottles per hour Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling Weight: 32 lbs Dimensions: 16" W x 17" H x 14.75" D Warning: XpressFill bottle fillers are NOT certified as explosion proof, should be used in a well-ventilated area, and not for use with solvents. It should be noted that 70% alcohol is 140 proof and has a flash point of 70°F, making the product volatile, as well as flammable

Read more less

This power lead for the Cannular Can Seamer has an anderson plug on one end and alligator clips on the other. This can be used to power the Cannular from a stand alone battery, including a standard 19v power drill battery as pictured in the example photo.   Kegland Part number: KL12348

Read more less

Replacement silicone o-ring for the Chugger stainless pump head. H332 H332X H333 H334 H335 H336 Compatible with the following Chugger pump models: CPSS-IN-1 CPSS-IN-2 CPSS-CI-1 CPSS-CI-2 CPPS-IN-1 XCPSS-CI-1 XCPSS-IN-1 TRI-XCPSS-CI-1 TRI-XCPSS-IN-1

Read more less

This Duotight plug is used to block up your 9.5 mm (3/8") tees, elbows or other fittings for gas leak testing or simply to plug an unused section. Features: Insert plug and firmly push to connect Release plug by pushing in the collet on the Duotight fitting Suitable for both gas & beverage applications Made from food-grade acetal plastic Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL06965

Read more less

This Duotight to Female Beer Thread (5/8" BSP) fitting is perfect for connecting gas line to keg couplers. Although it could be used with 9.5 mm EVA Barrier as a beverage line, this would only be recommended for long draw systems where the beverage line will be 20-25 ft long. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!   Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Keg coupler not included. Kegland Part number: KL06910

Read more less

This Duotight tee fitting is compatible with EVABarrier 9.5 mm OD tubing (D1719). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!   Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07023    

Read more less

Turn your kettle into a Heat Exchanged Recirculation Mash System with the HERMS coil from Blichmann Engineering. Comes in two sizes, small for 7.5 to 10 gallon kettles, and large for 15 to 55 gallon kettles. Installation instructions can be found below under "Documents". 304 Stainless Steel Small HERMS Coil fits up to 10 Gallon Kettles Large HERMS Coil fits 15 to 55 Gallon Kettles Easy to install and sanitize bulkhead fittings! 1/2" NPT Connections Includes two 1/2" elbow QuickConnector™ fittings! Dimensions: Small - 7.75" (tall); 25' long tube Large - 9.5" (tall); 32' long tube   Lowest Price Guarantee, this item has MAP pricing so you can be confident you won't find it for less.

Read more less