Search results for "pumps"

Replacement internal pump for 110-120V Gen 3 BrewZillas. Comes with bare wire. KegLand Part Number: KL05463

Read more less

Dispense a keg on the go with the party pump kit Features: Picnic faucet Beer line Pump Kegland Part number: KL01212

Read more less

The BrewBuilt Chilling Pump Kit includes everything you need to push glycol or ice water through your chilling coil or jacketed tank. It includes an Inkbird temperature controller to make it easy to hold your temps. Available with either a 800 or 1300 GPH submersible pump. In general we recommend the 800 GPH pump for use with any batch size fermentation less than 10 gallons, and the 1300 GPH pump for any batch size fermentation between 10 gallons and 2 bbl. Kit Includes: Submersible Pump (PMP601 or PMP602) Inkbird Dual Stage Digital Temperature Controller (FE640) 2x 5 ft. lengths of 3/8" SiliconeTubing (H983) 4x Butterfly Hose Clamps Stainless 3/8" Barb x 1/2" MPT

Read more less

Replacement 6 Watt high temperature magnetic drive pump for 110V Gen 4 BrewZillas. This pump is not backwards compatible with Gen 3 or older units. KegLand Part Number: KL24358

Read more less

Just the pump for the cleaning kit, no cleaner, wrench, or brush.

Read more less

Replacement Enolmatic Pump P.15 Complete 110v  

Read more less

Discover the Anvil Brewing Pump XP: Your Ultimate Home Brewing Pump Companion Experience the ease of the Anvil Brewing Pump – XP, the most affordable and feature-rich brewing pump to hit the market! A whisper-quiet operation delivers an optimal flow for smooth recirculation and wort transfer as you catch up with friends, jam to tunes, or just enjoy the quiet of a brew day. Ideal for all-grain brewing and all-in-one systems, delivering power and precision. Crafted with home brewers in mind, the XP stands out with its innovative design that combines durability, efficiency, and user-friendly features. At the core is a unique fan-less motor that ensures whisper-quiet performance, allowing you to focus on the art of brewing without distracting noise. Whether you’re recirculating mash for better efficiency or transferring hot wort to your fermenter, this pump handles it all with a maximum flow rate of 3 gallons per minute (GPM) and a lift capacity of up to 7 feet, making it perfect for setups of various sizes. Versatility is key with the Anvil Brewing Pump XP. The 360-degree rotating outlet lets you route hoses in any direction, adapting to your unique brewing setup whether you’re using a single-vessel all-in-one system like the Grainfather or a traditional three-tier all-grain rig. It’s compatible with 120V 60Hz power outlets, comes with a convenient 6-foot cord for flexible placement, and includes an in-line switch for easy on/off control right at your fingertips. Whether you’re a seasoned all-grain enthusiast or just starting with extract kits and looking to upgrade, this pump elevates your process. Join countless satisfied brewers who rave about its reliability and performance. Don’t settle for noisy, cumbersome pumps that complicate your day—choose the Anvil Brewing Pump XP and make every brew day a breeze. Features Easier to Brew Sturdy stable heavy metal gauge base prevents tipping, even when all the fittings are connected Unique fan-less motor design provides a whisper-quiet operation Configure and mount in limitless combinations to suit your set-up, with the 360-degree rotating pump head Versatile pump that can be used anywhere in your brewing set-up due to the high-temperature impeller Easier to Clean The stainless steel Tri-Clamp pump head effortlessly disassembles in a matter of seconds Tool-free design makes cleaning a breeze Easier to Prime Air vent and discharge barb quickly prime the pump A conveniently located water-resistant switch powers the pump off and on Specifications Premium Construction & Design Made of 304 stainless steel precision-machined casting for durability 1/2” NPT with Tri-Clamp head for easy cleaning Maximized inlet and outlet ports for optimal performance Versatile & High-Performance 360-degree rotating pump head for limitless mounting and configuration options High-temperature impeller for reliable operation in brewing applications Max Flow: 6 GPM | Max Head: 10 FT Efficient & Serviceable Whisper-quiet 120V motor with low 0.24 amp draw 6-foot power cord included for easy setup Fully serviceable design with replacement parts available

Read more less

Replacement impeller for our H325, H327 & H328 March Nano Pumps.

Read more less

Plastic hand pump with sanke tap built in. Also known as a keg coupler, coupling, or adapter.

Read more less

Built-in pumps and digital controllers Control multiple fermentation temperatures independently Fill with 20% glycol solution for optimal chilling performance Cold crash with good insulation Perfect complement to BrewBuilt X-Series Conicals The IceMaster Max 2 is designed to cool fermentations in small vessels or barrels. It can be used with any vessel/fermenter/tank/barrel that has a glycol jacket or submersed cooling snake/coil/rod. This chiller features 2 built-in submersible pumps with independent digital temperature controllers, allowing you to control the temperature of 2 separate fermentation or storage vessels at once. Each digital controller includes a thermal probe that should be inserted into a thermal well in your vessel or can be taped to the outside of the vessel if you don't have a thermal well. The digital controller then measures the temperature of your tank and turns the submersible pump on or off to cool the liquid in your vessel to the desired set temperature.  Compatibility The Max 2 can be used with any fermenter that has a built-in cooling jacket or a submersed cooling coil. It works well as the cooling source for the following: Speidel - Speidel tanks with optional cooling jackets.    Barrels - If you use our barrel snake. This can be particularly attractive for a white wine ferment in a barrel. Capacity It is always difficult to determine exactly how many tanks can be chilled at one time as it depends on what is happening in each tank, how the tank is insulated, and what the ambient temperature is. Cold stabilizing always requires the most energy and requires well insulated tanks. We are currently experimenting with capacities but can provide this rough guide to get you started.   1 - 40 Gallon Tank or Barrel 2 - 10-20 Gallon Tanks Set Up In order to hook up the IceMaster to your fermenter or tank's cooling system, you will need 2 lengths of tubing per vessel. All tubing connections should be secured with hose clamps. The unit comes with JoinTech Male Quick Disconnects installed as the inlet/outlet bulkheads, and also includes Female QDs with barbs to connect your tubing to the bulkheads. QDs to connect tubing to your cooling system are not included as the connection type depends on your setup. Length 1: 1st bulkhead (IN) to cooling system outlet Length 2: 2nd bulkhead (OUT) to cooling system inlet Specifications: 2 built-in submersible pumps with independent digital controllers Pump controller reads in °F / °C Temperature controller reads in °C Labeled IN and OUT bulkheads with Male QD JoinTech Dry Break Quick Disconnects (4) Female QD JoinTech Dry Break Quick Disconnect w/ 1/2" Barb included Tank Capacity: 17 L / 4.5 Gal. Water Capacity Compressor: 3/8 HP Cooling Capacity: 500 Watt/1700btu Refrigerant: R600a Voltage: 110V Dimensions: 19" x 12" x 17.5" Wheels not included   Note: The sight glass attaches to the front of the unit by threading the elbow fitting to the bottom threaded drain port, and attaching the other end to the upper mount. Note that the top of the sight glass is open to allow overflow to drain out if the reservoir is overfilled. Warning: Do not set the reservoir temperature controller lower than 28°F (-2ºC). Running the unit below this temperature may negatively affect the unit's efficiency and has the potential to freeze beer which may impact the finished beer's flavor.  

Read more less

Position under a wine press to separate solid material before pumping to your fermentation tank Remove seeds and oxygenate wine during a pump-over process Filter out seeds while moving wine from the fermentation tank to a holding tank A buffer tank or svinatore is used for several applications. During a press, during a pump-over and sometimes immediately following primary fermentation. The EnoItalia Buffer Tank is made entirely of 304 stainless steel and features a removable filter bed and 1.5" tri-clamp ferrule outlet. Mounted on caster wheels with a push cart handle for easy mobility from tank to tank around your winery. This unit is used under a press such as our 300L or 450L presses and also under red wine fermentation tanks in a pump-over process where the screen removes seeds and provides oxygenation during the initial parts of fermentation. Features: Tank and rolling cart frame made from stainless steel Removable filter made from stainless steel 1.5" T.C. outlet connection for pump Locking brake on all 4 casters 34 Gallon (130L) capacity Dimensions: 30.8" L x 25.75" W x 30.8" H (33.9" with wheels)

Read more less

The Milwaukee MC720 PRO pH controller and pump lets you measure and adjust pH levels automatically. Summary The MC720US kit includes the MC122 pH controller and MP810 dosing pump to automatically monitor and fine-tune pH levels. Just set your pH parameters and let the MC720US pH Controller and pump do the rest. The MC720US is preferred by people looking to dial in their testing program when they have an ongoing need to maintain levels. Common uses are nutrient tanks and aquariums. Features Accuracy The Milwaukee PRO pH controller offers an accuracy to ±0.2 pH with two point manual calibration. Automation The controller provides a control range of 5.5 to 9.5 pH with alarms that activate when readings are higher or lower than set point. Compatible dosing pump The Milwaukee MP810 dosing pump (designed specifically for use with the MC122) is included in the kit. Easy installation The MC720 pH controller and pump kit comes with a complete mounting kit including a probe holder. Design features Fast easy to read current results with large digital LCD readout Accurate to ±0.2 pH Simple two-point calibration for increased accuracy with manual trimmers for easy adjustment 5.5 to 9.5 pH alarm set point range is easily accessible on the front panel Alarm activated when reading is above or below set point Comes with full mounting kit including probe holders Lab grade, double junction, gel filled probe designed for low maintenance 6.5’ probe cables for extra flexibility 12 VDC power supply Pump provides a maximum pressure of 1.5 bar or more than 50 feet of head pressure with a 0.39268 GPH / 9.5 GPD dosing flow. Uptake & Discharge Tubing Material: Polyethylene, 4.92' / 1.5 m. Black Pump Squeeze Tube Material:  Norprene. Use and Care  pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction. Sensing bulb The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes. Reference junction The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function. You can extend the life of your pH electrode in the following ways. Storage The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Store the pH probe in storage solution MA9015. Only use tap water short-term if MA9015 is not immediately available and NEVER store in distilled Water (DI) or Reverse Osmosis (RO) water. This will damage the sensitivity of the probe. This best way to store the probe is with the probe's cap filled with MA9015 Storage Solution and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. Cleaning Residue from the sample can impact the sensitivity of the sensing bulb and block the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking the probe in MA9016 Cleaning Solution for about 20 minutes. Calibration The pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH controller accurate. Also, calibrate after cleaning or a long period of storage.  

Read more less

Flexible rubber impeller for the Euro 60 must pump, PMP565

Read more less

A spare / replacement impeller for our PMP200 (orange) Chunky Pump. Does not fit pumps from other suppliers.

Read more less

FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. Thick wall tubing is recomended for pumping and pressurized systems. For siphoning and transferring liquids, see our thin wall and transfer tubing.  

Read more less

304-type polished stainless. A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the winery when connected.

Read more less

You're in college and you would rather spend your money on more beer than a fancier tap.  We get it.  The Pony Pump is a compact air pump that fits any American sanke style keg. It is lightweight, has a pressure relief vent, 2' length hose and a plastic faucet.  Also known as a keg coupler, coupling, or adapter.

Read more less

Ideal for pushing wine through plate and frame, lenticular, and/or cartridge filters Ideal for moving must and wine Dry stop protection Wireless remote Optional motorized receiving hopper for placement under a destemmer (shown in photo) The ultimate one winery pump for all applications The Lobe Rotor pump from EnoItalia is the ultimate winery pump, representing the best of all worlds.  Lobe Rotor pumps can also be used for filtering applications where positive pressure is necessary to pump wine through a sheet or membrane.  Lobe Rotor pumps also have some of the lowest shear values which protects skins and seeds from being macerated during the pumping process.  The stainless lobe rotos are coated in rubber to ensure that seeds to do not get marcerated in the pumping process.   Enoitalia also makes an optional receiving hopper that can be used under a destemmer crusher to collect whole destemmed, or crushed grapes. Max capacity 50,700 lbs with destemmed grape, and 44,000 lbs with fermented grape. Benefits: The only pump you will need in your winery that allows you to use if for all applications. The highest quality, lowest shear value keeps skins and seeds intact to reduce unwanted tannin.  Positive pressure allows for use in filtering applications Optional receiving hopper availlable Features: PLC interface Speed control   Timed and programmable volume pumping Dry stop protection - pump turns off to protect pump when dry Direction reversal Pressure switch Connection for a motorized collection buffer Wireless remote control Easy to use PLC programmable controls Low profile and easily moved 3" tri-clamp inlet/outlet 220v 60hz 3 Phase 7.5 kW

Read more less

Variable capacity tank well-suited for fermentation, wine aging, kombucha, pickling, and other applications Floating lid can be positioned as needed to match the volume of the liquid you're working with Proprietary rubber lid gasket allows for a superior seal compared to traditional gaskets, providing better protection for your wine Made from 304 stainless steel with ultra-high-quality laser welds 2R rated interior finish resists residue build-up and is easy to clean Air pump with pressure gauge, airlock, and ball valve included Made in Germany by Speidel We are is proud to offer our small Variable Volume Tanks from Speidel - a German manufacturer of premium quality stainless steel tanks for the wine industry. The tank body is fabricated from 304-type stainless steel, while the floating lid is made from 316-type stainless and has an inflatable bladder that pumps up to seal the wine off at any volume level. They can be used for primary fermentation as well as aging. Built in Germany by Speidel, the world-class traditions of German engineering and craftsmanship are reflected in these tanks. And, after examining tanks built by every major manufacturer worldwide, we can safely say that when it comes to features, quality and price, these tanks represent the very best value available in stainless steel wine storage. These tanks arrive to you complete and ready to go out of the box after a little assembly. The tanks are fitted with 1/2 inch threaded ports to accomodate the included 1/2 inch stainless steel ball valve and 1/2 inch stainless plug. The plugged port is intended for use with an optional thermometer (MT512). Speidel Quality Features: Rubber Lid Gaskets - Rubber gaskets are much thicker than the traditional clear vinyl gaskets, which along with their extruded manufacturing process provide a much better seal with the tanks wall. They're seamless and more oxygen resistant than the clear gaskets. That means better protection for your wines! Weld Quality - Speidel's robotic-arm laser welders create flawless stainless to stainless junctions that look and feel more like a taped fabric seam than a traditional weld. Ultra high-quality welds leave no chance for residual product to harbor spoilage organisms. Interior Finish - Speidel tanks feature an ultra-smooth 2R rated interior surface which effectively resists the build-up of tartarate residues. Clean your tanks with cold water after cold stabilization! Say goodbye to harsh cleaning chemicals and expensive CIP systems! Warranty - Speidel-Behaelter, GmbH backs up each and every tank with an industry-leading 25 year warranty against defects in materials or workmanship. And, as a 5th generation manufacturer, you can be confident they'll be around to honor that warranty should the need arise. Tank Dimensions - 630mm D x 999mm H (24.8" D x 39.3" H) Note: Over tightening the airlock / orange bulk head can cause it to crack. Only thread the airlock down until it feels snug. Do not over tighten.

Read more less

A replacement head that fits either the H315 or H315HF Polysulphone pump. This is only the plastic head, no impeller.

Read more less

All stainless grape destemmer with built-in must pump Screw Feed provides fast, continual hands-free operation Rubber tipped destemming bar for softer processing 4,000 - 4,500 lbs/per hour processing capacity Removable stainless basket for easy cleaning Made in Italy by EnoItalia For the serious home winemaker or a very small winery, this machine represents an amazing value. It is gentle, easy to load, and pumps the grapes into your awaiting fermenter, eliminating the need for a separate must pump. Why No Crushing Rollers? Because you don't need them. Here is how it works. You put fruit in the top bin and the screw feed moves the fruit to the left where it drops down into the destemming chamber. The fruit is destemmed and grapes drop down through the grate to the next level. Stems are ejected out the end of the destemming chamber and onto a tarp on the ground. After the fruit drops through the destemming chamber it falls into a bin at the bottom of the machine that has a screw feed. The screw feed pushes the grapes to the right where they are pushed into a circular chamber. In the circular chamber, a paddle wheel, pushes grapes back out the exit tube, through a 3" hose, you attach, and into the awaiting fermenters. Why this machine is so popular in Italy Because they know you don't need rollers on this type of machine. The action of the two screws, the destemming chamber and the paddle wheel crack the berries. More on the Built-in Must Pump The built in paddle-wheel style must pump can push fruit an average of 12' high with a 10' horizontal run OR up to 4' high with a 40' horizontal run. These are estimates only: actual results will vary on factors such as the total load on the machine and the viscosity of the must in the transfer tube. It can only be used at processing time and cannot be used later in the winemaking process. A Great Value! We recommend this machine for small wineries or larger home producers who do not wish to make the considerable jump to truly commercial quality equipment. You can make very, very good wine with this machine and we often tell small winery owners that the money saved can be used more effectively in other ways to make great wine.  Summary of Features: 1) Stainless Body, Bin, Agitator, and Screw Feed 2) Removable stainless basket for easy cleaning (Destemming basket holes are 1.0225" wide) 3) A Screw Feed for continual, faster, hands-free operation 4) Rubber tipped destemming bar for softer processing 5) Output of 4000 - 4,500 lbs/per hour 6) Paddle wheel style Must pump built in with 3" TC Outlet 7) A powerful Single Phase 220V 2 HP motor (12.1 amp draw) with starting capacitor 8) High-quality units made by Enoitalia of Italy 9) Replacement parts are available 10) Two casters allow for easy wheel-barrow type movement 11) Emergency stop button 12) Length 46.5" (118 cm), Width 27" (68 cm), Height 35.4" (90 cm), weight 207 lb (94 kg) 13) Unit comes with bare cord wire. Wire on the appropriate 220v plug for your electrical connection.   Please Note: This item may come with a bare cord or with a European style plug.  You will need a professional electrician to wire the pump with the appropriate plug.  

Read more less

Wheeled crush pad pump rolls directly under the Jolly 40 or Jolly 60 Crusher Destemmer Stainless steel construction throughout Screw feed moves grapes to the elliptical must pump with 3" tri-clamp outlet Up to 16,000 lbs per hour processing capacity Made in Italy by EnoItalia A 3-Phase Crush Pad Specific must pump that transfers crushed grapes from your Crusher Destemmer to your tank or bin.  Entire pump is on wheels and will slide under the Jolly 40 or Jolly 60 Crusher Destemmer. Grapes would fall into the awaiting stainless hopper. Stainless screw moves grapes into the eliptical, paddle style must pump that then moves them through 3" tubing to final destination.  Considered more gentle than using a rubber impeller must pump. Only available in 3 phase power.  Details: Power: 2.5 HP Three Phase 220 v draws 4.7 amps Capacity:  12,000 to 16,000 pounds per hour Shaft Speed:  47-58RPM Max Pressure: 7.2 PSI (0.5 BAR) Out Let Barb: 3" Tri-Clamp Max Discharge Height:  9 feet Max Discharge Distance: 30 feet Weight: 220 Pounds Pump Body: Stainless Steel Loading Hopper & Screw: Stainless Steel Refillable automatic lubricator Hinged discharge cone can be opened for inspection Single speed pump Please Note:  This unit REQUIRES 220V Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

A larger impeller than what comes in the standard "809" pump. These help to prevent cavitation in the pump head. Designed for our old H315 and new H315HF pumps. Will also fit and improve H350 and H375 pump heads.

Read more less

Wheeled crush pad pump rolls directly under the Jolly 40 or Jolly 60 Crusher Destemmer Stainless steel construction throughout Screw feed moves grapes to the elliptical must pump with 3" tri-clamp outlet Up to 16,000 lbs per hour processing capacity Made in Italy by EnoItalia A 3-Phase Crush Pad Specific must pump that transfers crushed grapes from your Crusher Destemmer to your tank or bin.  Entire pump is on wheels and will slide under the Jolly 40 or Jolly 60 Crusher Destemmer. Grapes would fall into the awaiting stainless hopper. Stainless screw moves grapes into the eliptical, paddle style must pump that then moves them through 3" tubing to final destination.  Considered more gentle than using a rubber impeller must pump. Only available in 3 phase power.  Details: Power: 2.5 HP Three Phase 220 v draws 4.7 amps Capacity:  12,000 to 16,000 pounds per hour Shaft Speed:  47-58RPM Max Pressure: 7.2 PSI (0.5 BAR) Out Let Barb: 3" Tri-Clamp Max Discharge Height:  9 feet Max Discharge Distance: 30 feet Weight: 220 Pounds Pump Body: Stainless Steel Loading Hopper & Screw: Stainless Steel Refillable automatic lubricator Hinged discharge cone can be opened for inspection Single speed pump Please Note:  This unit REQUIRES 220V Three Phase power and will not function on anything else.   Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord.

Read more less

Upgrade your MKII pump with a 304 stainless steel replacement head. Stainless steel is more durable if you are attaching ball valves. Very occasionally the threads on the plastic head that comes standard on the MKII can break if you are using hard to close ball valves that apply a lot of torque. Stainless steel is very robust and will not break, is food grade, and well... stainless. Before you snag the stainless center-inlet head, also consider the stainless inline tri-clamp head. Kegland Part Number: KL03865

Read more less

Replacement impeller for the Euro 20 pump. In documents tab: Position: 7

Read more less

Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1.5" T.C. ports to attach your preferred 1.5" tri-clamp fittings Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. This upgrade kit is only compatible with the 25-Watt MKII pump (PMP50). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1.5" tri-clamp ports can be used to attach barbs, quick disconnects, camlocks, or any 1.5" tri-clamp fittings you prefer. KegLand Part Number: KL36924

Read more less

Keep your Brewing Pump-XP running at its best with the Replacement Motor Assembly. Designed for durability and reliability, this motor ensures consistent flow and performance while operating with whisper-quiet efficiency.  

Read more less

Replacement stainless steel pump head for the 65-watt MKII Pump (PMP502). 3/4" BSPT ports. KegLand Part Number: KL03872

Read more less