Search results for "pumps"

A replacement o-ring for our March magnet drive pumps and Chugger pumps. Compatable with the following SKUs: H315HF, H332, H331, H375, H320, H350.

Read more less

Pump wort from your Braumeister to your fermenter using the Braumeister's built in pump. Features: Only works with 20 or 50 Liter Braumeisters Works with both standard and Braumeister Plus Pumps wort to a fermenter even when placed higher than the Braumeister Includes stainless pipe, suck/pump plug, valve, and about 5 ft. of silicone tubing

Read more less

A replacement pump head for the H308 diaphragm pump, should the diaphragms become worn or get damaged by passing particulate matter through them. Please Note: This pump head does not include the Pre-Filter or the Elbow fittings that are connected to your hoses, those will need to be transferred over from the existing pump head or purchased separately.

Read more less

Quickly clean kegs and fermenters while you tend to other tasks High flow rate pump provides a powerful blast that coats the inside of the vessel Use it for cleaning or sanitizing with your favorite solutions 15L bucket provides a much larger reservoir compared to other models Everything included in the system neatly fits inside the bucket for easy storage The Bucket Blaster is a convenient and effective system for cleaning and sanitizing kegs, carboys, and other brewing vessels. The beauty of the Bucket Blaster is that you can set it and forget it. Simply set up the keg washer basin with your cleaner or sanitizer, set your vessel over the jet nozzle, power up the pump and let the Bucket Blaster do the work while you tend to other tasks. Perfect for homebrew kegs, carboys, FermZillas, or bucket fermenters. This unit comes with a 15L (3.9 gal) bucket, which doubles as a storage container when you are not using the system. Other keg washers come with a very small reservoir that make it a pain to move, as liquid spills over the sides easily and generally they just do not work as well. The Bucket Blaster's large 15L reservoir makes it much less likely for you to spill liquid on the floor, and since it can hold more cleaning solution, each cleaning cycle will be that much more effective. Includes: Submersible Pump - 2,000 L/hr 15L Bucket Powerful Jet Nozzle 9.5 mm EVABarrier Tubing Gray and Black Ball Lock Disconnects Duotight fittings for all connections Kegland Part Number: KL15905   Bucket Blaster Instruction Manual  

Read more less

Accurate. Simple. Reliable. 24/7 pH Control. The Milwaukee MC311 PRO Conductivity (EC) controller lets you measure and adjust EC levels automatically. Summary The MC311 EC controller automatically monitors and fine-tunes EC levels. Just set your EC parameters and let the Milwaukee EC Controller do the rest. The MC311 is preferred by people looking to dial in their testing program when they have an ongoing need to maintain levels. Common uses are nutrient tanks and aquariums. Features Accuracy The Milwaukee PRO EC controller offers an accuracy to ±2% full scale. Automation The controller provides a control range of 0.0 to 10.0 mS/cm with alarms that activate when readings are higher or lower than set point. Compatible dosing pump Milwaukee also offers the optional MP810 dosing pump Easy installation This EC Controller comes with a complete mounting kit including a probe holder. Design features Fast easy to read current results with large digital LCD readout Accurate to ±2% full scale Simple one-point calibration with manual trimmers for easy adjustment 0.8 to 2.8 mS alarm set point range is easily accessible on the front panel Alarm activated when reading is above or below set point Comes with full mounting kit including probe holders MA812/2 hardwired EC probe 6.5’ probe cables for extra flexibility 12 VDC power supply  

Read more less

Gently mix yeast, sulphite, and additives into your wine with this variable speed mixer. The stainless cart allows you to move the mixer up and down to the height of your tank fitting. Also adjust the angle of the mixer to accomodate inclined, reinforced mixing ports, like on our Speidel Stainless tanks. The included pump is a very unique feature that allows you to pump a slurry out of a bucket, into the mixer and into the tank. This saves time by not having to open the top hatch, reduces possible oxidation, and ensures a better mix.  How to Use Mixing ports enter through full port 2" TC ball valves to allow for an easily installation and disassembly. Position and attach the mixer to your 2" TC ball valve.  Open the valve and slide in the adjustable mixing shaft, lock the shaft in position, and turn on.  Adjust the speed to accomodate your desired level of agitation.  To remove unlock shaft, slide out, turn off TC ball valve, and then disconnect mixer from TC ball valve. For Use in Beer: Wine tank mixers are perfect for mixing hops during dry hopping operations. Their use decreases the time needed to extract hop oils and lowers the amount of hops needed to get the same dry hopping level. This requires a horizontal port with a full port ball vale on the tank. Features: All parts in contact with the liquid are made of stainless steel AISI 304. 0.75 kw power, speed 0-1400 RPM Euro 20 pump included Single phase power supply Rod length 650 mm Width 155 mm propeller Stainless cart

Read more less

Another great option for party keg serving.  Tap includes sanke coupler & faucet, & has a larger piston for less pumping and more drinking.

Read more less

Mechanical Seal (Fixed + Rotating) for PMP530, PMP535, and PMP535S Euro 30 Pumps (Pos. 8 & 9) EnoItalia Item #: 7023-30 (G 96148 + G 91452)

Read more less

For siphoning out of a carboy or bucket. Comes with 3/8" cane. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. 24" racking tube. Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage.

Read more less

For siphoning out of a carboy or bucket. Comes with 1/2" cane. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers. 24" racking tube. Instructions: Sanitize and rinse your Easy-Siphon. Get the inner tube gasket and the outer tube wet. Attach the curved siphon to a hose. Submerge the end of Easy-Siphon into your container. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. Pull the inner tube up about 7" until the liquid fills the tube. Pump the inner tube down and siphon will begin. Pull out inner tube and sanitize Easy-Siphon for storage.

Read more less

Replacement plastic pump head for the MKII High Temperature Magnetic Pump (PMP50). If you're replacing a broken head on your MKII pump, also consider these stainless steel upgrades—standard stainless center inlet head or stainless inline tri-clamp head. Kegland Part Number: KL13536

Read more less

This is a replacement assembly for our H315HF pump. It has the polysulfone head and the impeller as well. This unit is set up with the new impeller, and will replace the head of an H315HF unit, or upgrade an older H315 to the High Flow model.

Read more less

Replacement Feet for H308 Super Transfer Pump.

Read more less

Upgrade your MKII Magnetic Drive Pump with a stainless steel pump head that quickly & easily installs via 3" tri-clamp T.C. connection allows the pump head to be oriented at any angle in a full 360-degrees Pull ring PRV at the pump outlet makes it easy to purge air and prime the pump before each use Inline flow path for smooth integration into your brewery while keeping your tubing lines tidy Stainless steel head with 1/2" threaded ports to attach your preferred fittings—tri-clamp, quick disconnect, camlock, and More! Upgrade your MKII Magnetic Drive Pump with a stainless steel inline pump head! The TC Breakdown Brewing Pump Head provides several advantages over the standard MKII pump head, first and foremost being it's made of stainless steel instead of plastic. This allows for much easier installment of fittings without the risk of breaking off the plastic inlet or outlet. It will also convert the pump head from "Center Inlet" to "Inline" flow path which can make it much easier to integrate into your brewery and keep your brewing hoses tidy. At the outlet of the pump, there is a very handy pull ring PRV that allows you to bleed liquor or wort from the pump head to release trapped air and prime the pump. But what some MKII users might find most exciting about this upgrade kit is that it converts the pump head connection to 3" tri-clamp! Not only do you have a full 360-degrees to orient the pump head any which way, cleaning the pump after use has never been easier—just pop off the tri-clamp, wash out the pump head, and clamp back on. This upgrade kit is only compatible with the 25-Watt MKII pump (PMP50). It will not fit the larger 65-Watt MKII or the Blichmann Engineering RipTide pump. If you don't already own the 25-Watt MKII, you can purchase it with the T.C. pump head already installed here. Tri-Clamp Pump Head The T.C. pump head can be removed quickly and easily using the 3" tri-clamp. This means no drivers or power drills are needed to back out the six Phillips head screws that mount the pump head on the standard version of the MKII. Whip the head off in a flash to clear out spent grain, hop material, or clear a blockage. Attaching the pump head with a tri-clamp also allows the head to be rotated at any angle in a full 360-degrees. This makes it easy to configure the plumbing to your unique brewery setup. Inline Design An "inline" pump head simply means the input and output are on a straight horizontal line with one another which can make it easier to integrate into your brewery setup. If you're using a 3-vessel horizontal system, the inline pump head will make it easier to keep your hoses neat and tidy compared to pumps heads with a center inlet. PRV Purge Valve The corny keg style PRV will make priming the pump a breeze. Simply let bleed the pump head to purge air out before turning the pump on and you'll avoid any cavitation issues. The PRV also acts as a safety so you do not over pressurize your pump head or brewery system. 304 Stainless Steel The entire pump head is made from 304 grade stainless steel so it's highly resistant to chemicals, heat, and physical abuse. The 1/2" BSP threaded ports can be used to attach barbs, quick disconnects, camlocks, tri-clamp adapters, or any other 1/2" fittings you prefer. KegLand Part Number: KL27267

Read more less

Replacement pump for the Speidel Braumeister Electric Brewery. This is the newest unit now being used in the 2021 models, but is also backwards compatible with older generations.  

Read more less

Complete internal gasket set to rebuild our PMP100 pump. Does not include the impeller.

Read more less

Replacement body O-ring for Euro 30 pump.  This O ring is slightly smaller than the O-Ring in the head of the PMP530 & PMP535. In Documents Tab: Position: 6 EnoItalia Item #: G2151

Read more less

Translucent, food-grade tubing temperature rated to 500F. Odorless, tasteless, and inert Silicone tubing is FDA food-grade approved from -100F to 500F. Translucent natural color allows you to see the flow. The perfect tubing for building a personal brewery, especially for any time that the wort in contact with tubing will be above 180F. This tubing is not designed to hold pressures above 20psi. It works great with our magnetic drive pumps such as a March or Chugger pump, but we do not recommend it with a impeller pump or for use with household water pressure. Platinum Cured Quantity ordered will be shipped as multiple pre-cut lengths. Maximum length available is 100 ft. *Will burst at 30 PSI at 70F.  

Read more less

A replacement or spare Pre-Filter for the H308 diaphragm pump. The redesigned pre-filter is easier to remove and reattach with the need for tools, and fully disassembles for cleaning. Fully compatible with pre-2020 Super Transfer pumps that came with the original pre-filter.

Read more less

The Essential Kits are designed to get you up and brewing with one click.  It's highly recommended you add this to your cart with your purchase of a pump. TC PUMP KIT: TC Ball Valve Hose Barb | 1/2" to 1.5" TC Hose Barb | 1/2" Barb to 1/2" MPT Clamp | 1.5" TC clamp (2) Gasket | 1.5" TC gasket (3) Tubing | ½” ID Silicone (10ft) Hose Clamps (2) THREADED PUMP KIT: 1/2" Threaded Ball Valve Hose Barb | 1/2" Barb to 1/2" MPT Hose Barb | 1/2" to 1/2" FPT Tubing | ½” ID Silicone (10ft)

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Allows for easy and efficient gas transfers, ensuring minimal oxygen exposure and preserving the delicate flavors and aromas of your barrel-aged creations! Stainless lock down mechanism to adjust height Compression Silicone Bung to form airtight seal with barrel Adjustable lees pin Transfer wine out of a barrel using inert gas to reduce oxidization with our Gas Transfer Tool. After using most all similar tools on themarket, we took what we liked and disliked and made our own. Obviously we love the price!... but perhaps more impressive is the polished finish and the excellent quality welds. We sell it without a sight-gauge welded in or attached. We found it easier to clean without a welded in place sight-gauge. We also found that most wineries already had other sight-gauges in the winery and did not need it included. Of course it is available as an option, (sight-gauge H664, clamp H652, gasket, h656.) Replacement gaskets and parts in stock and available.   Quality Features Stainless lock down mechanism to adjust height Polished stainless tube Compression Silicone Bung to form airtight seal with barrel Adjustable lees pin Made from 304 stainless steel Specifications 1.5" Tri-Clover Outlet 1/4" Stainless Steel Ball Valve with FPT inlet for inert gas 31" height from lees pin to pictured stopper

Read more less

The new GOfill bottle filler makes filling inexpensive, easy, prevents oxidation, and has a built-in pump. It is the perfect solution for small volume wineries.  Connect to a vessel containing wine to be bottled. Wine is collected in a single-use liner, automatically kept full by the pump. “A simple solution to minimize cleaning and oxidation as the fill liner is closed with no headspace – a signature of GOfermentor.” says Dr Singh, the inventor of a series of innovative products for the winery.  The liner feeds four bottle filling heads simultaneously using gravity flow. Filling can be paused for hours with no oxidation. Keep filling as long as you want, the pump refills the liner automatically. When bottling is complete – simply discard the fill liner and rinse the heads. Gravity filling heads provide simple, reliable operation with minimal foaming. The disposable feed liner decouples filtration from the bottling operation, enabling one person operation. The smart pump automatically shuts off if there is no flow of wine, preventing air from contacting wine in the fill liner. 1. FOUR HEADS: Four gravity filling heads. 240 bottles per hour. 2. DISPOSABLE FILL TANK: Single-use liner feed tank – no washing, no oxidation, no contamination. 3. BUILT-IN PUMP: Built-in pump and automatic fill liner volume control. 4. AUTO-SHUTOFF: Liquid-out detector with automatic pump shutdown Specifications: Bottle rack is adjustable for different size bottles Machine fills bottles to user-set level in bottle neck Counter top unit Requires 115VAC 10A household power Dimensions: 18" x 18" x 38" Weight (empty): 40 lbs Fill bag capacity: 3 to 20 liters (user-set) Filter housing and filters are not included    

Read more less

Prevent electrocution! This is the best way to plug in a pump or other brewing or winemaking equipment because it will trip the circuit when any water flows on the ground wire. 15 Amps 1875 Watts 125 VAC 60 Hz.

Read more less

The Enoitalia bottle filler is a complete, portable, gravity style bottle filler perfect for a small winery. Features six filling heads and stainless steel construction. This a complete bottle filling solution that comes on cart and includes built in pump, electronic float switch, and electric valve. As the wine level drops in the reservoir the pump is turned on to refill. Electric valve keeps wine from being siphoned back out of reservoir. Fill up to 100 cases of 750ml bottles per hour. If you do not have the human power to keep up you can use 4 heads at a time so there is no disadvantage to getting a 6 head filler vs a 4 head filler. We only offer the 6 head filler in this model because the price is very similar between 4 and 6. Unlike units from other Italian manufacturers, this unit has removable filling heads for easy cleaning. The air removal tubes are also larger which speeds filling. The fill head is also easier to adjust for bottle fill heights. The filler can be adapted for use with high viscosity liquids like olive oil with the use of a special filling head. Features: Adjustable heads are easily removed for cleaning All parts in contact with the wine are made from 304 type stainless steel Level gauge located on the side of the reservoir Built-in rubber impeller pump with 1.5" T.C. inlet/outlet Rubber impeller pump built-in Electronic float control Electronic shut-off valve On 4" casters with brake 15mm diameter filling head Fill height is easily adjustable Larger inner diameter fill head for faster air/gasremoval from the bottle for a faster fill rate 980L per hour fill rate 55L reservoir Can fill bottles up to 22" tall 200 pounds 71" T x 34"w x 26" D 110V Please note: The integrated pump is hardwired into the panel. It cannot be disconnected and used separately as it appears in the photo.

Read more less

Mark’s Mark II Keg Washer™ is designed to clean and sanitize large vessels like cornelius kegs and carboys. It is also intended to provide a sanitation container for miscellaneous items such as airlocks, thermometers, tubing, keg fittings, and more. Quiet, Fun, & Easy to Use Very quiet when in use and most importantly speeds up the process of cleaning and sanitizing.    Light in weight.  Easy to store.  Cleans Kegs Cleans and sanitizes a cornelius keg without having to take apart the ball lock fittings, poppets, and dip tubes. You can clean the keg and the dip tube simultaneously using the T adapter. Cleans Tubing Too Cleans tube separately utilizing the pump with the additional barb fittings included.  Cleans Parts Reservoir holds 1.25 gallons of water making it easy to fill and empty with sanitizer.     Saves water and sanitizer.  The unit does not have an on/off switch, you can plug it directly into a wall outlet to operate the pump or plug it into an outlet that is controlled by a switch. Never leave the keg washer unattended when in use. When in use, fill the keg washer up to about 1 inch under the brim. The pump is not self priming, so always make sure the basin is full of water before plugging in the pump. Owner's Manual is included. Please read thoroughly before using. Dimensions of the inside of the washer's reservoir are: 6"L x 12"W x 4"D. Please Note: Product does not include the bucket, carboy, or keg pictured above for display purposes. The pump specs are: 520 GPH 120 Volts AC 40 watts Ceramic shaft, impeller

Read more less

Pumping off the mash tun is the easiest way to collapse the screens. It is recommended that you either put a tee and a vacuum breaker ahead of the pump or run the wort into a grant and pump off the grant. Controlling the pump with restriction, a VFD, or a dual level float switch is ideal. This tall cylindrical grant has three 1.5" tri-clamp ports and a silicone tube for a sight glass. The narrow design helps to reduce surface area and hot side aeration. The inlet and outlet side ports are raised a few inches above the conical dish bottom dump, which helps to separate grain sediment from the wort. 40L / 10.5 gal Made from 304 stainless steel Ships without valves    

Read more less

Reinforced, FDA approved, food grade tubing for use with our pumps. Reinforced Vinyl is rated up to 158°F and 200 PSI. This type of tubing is particularly useful when putting backpressure on a system. Standard Vinyl tubing and Silicone are great for their own purposes, but are not designed to handle pressure, and can balloon up or even explode if too much pressure is used! Reinforced vinyl tubing. FDA & 3-A Sanitary certified for beverage and dairy processing. Inner Diameter (ID): 1/2" (12.7mm) Outer Diameter (OD): 0.76" (19.2mm) Working Pressure: 200 PSI Weight: 0.13 lbs/ft  

Read more less

Replacement pump controller for the BrewBuilt IceMaster Max 2 and Max 4 glycol chillers. Reads in °F/°C.

Read more less

Upgrade your pump with our optional Air-Charged Dampener. Diaphragm pumps naturally create a "pulsing" flow; our dampener smooths this out into a steady stream, which is essential for filtration processes. By removing the surge, you protect your filter media from pressure spikes, ensuring a cleaner finish and longer filter life. This unit is sized for the 2" MB Sanitary Pneumatic Diaphragm Pump. Tri-clamp adapter fittings are included.  

Read more less