Search results for "pumps"

Welded 1.5" tri-clamp ports for a lifetime of leak-free use 304 stainless steel construction with mirror polish finish Notched lid provides cover while not interfering with immersion chillers, hop bags, or other accessories Choose from Boil Kettle, Hot Liquor Tank or Mash Tun configurations The Boil Kettle comes without fittings The Hot Liquor Tank includes a Kettle Maximizer and Thermometer with 2" Probe The Mash Tun includes a False Bottom Kit and Thermometer with 6" Probe Add your preferred Valve Hardware Pack when choosing your kettle above or purchase your own valve & fittings separately Designed for Brewing. Built to Last. BrewBuilt brew kettles are made from 304 stainless steel and offer an unparalleled mix of features for the price. At the very top of the list are two welded-in place tri-clamp couplers that offer a lifetime of leak free use. As you can imagine, welding in a coupler costs more than punching a hole and using a gasketed (i.e. weld-less) fitting. Welded fittings offer a permanent connection that to us is worth every penny. The second unique feature that we absolutely love about these brew kettles is the notched lid with silicone plug. This notch allows you so much flexibility; you can use an immersion chiller, one of our Ultimate Sparge Arms for mashing, tie off hop bags, take a temp reading during cooling, or whatever else we all can dream up. Our new T.C. kettles were designed to keep pace with the ever-evolving world of brewing technology. Tri-clamp fittings are standard fare in professional breweries, and they’ve been widely adopted in homebrewing as T.C. fermenters and pumps become more affordable and widely available. Tri-clamp fittings, also known as Tri-clover, allow you to make a sanitary connection that is free of nooks and crannies for contaminants to take hold. They are much easier to break down for cleaning compared to threaded connections, and they don’t require Teflon tape to make a watertight seal. T.C. fittings and accessories also give you the distinct advantage of being able to clean in place (CIP), so you don’t need to break down your entire system after every brew day. Configurations The base boil kettle comes without fittings so you can modify it the specific tri-clamp accessories that best suit your needs. Add one of the optional Brewing Kettle Valve Packs above which include your choice of valve and all the hardware you'll need to connect 1/2" ID transfer tubing, as well as an end cap to seal the top port if a thermometer or other accessory is not in place. The Hot Liquor Tank includes the base kettle plus a kettle maximizer for the bottom port and thermometer with 2" probe for the top port. Clamps and gaskets are included to attach the tri-clamp kettle maximizer and the thermometer. The Mash Tun includes the base kettle plus a false bottom kit for the bottom port and thermometer with 6" probe for the top port. Clamps and gaskets are included to attach the tri-clamp false bottom maximizer and the thermometer. Kettles do not come with a valve or additional fittings for the bottom port as standard. Add one of our pre-configured Valve Packs or purchase your preferred valve and fittings separately. This Brew Kettle has a lot to offer... Some other features we dig include the internal volume markers from the bottom to the top - so handy for instant reads. The silicone sleeved handles on the kettle and the lid are a cool feature to protect your hands. The tri-clad bottom with a 4mm core of aluminum sandwiched between two layers of stainless steel offers even heat distribution during the boil and also makes it a perfect choice for anyone wanting to use an induction burner. Beefy 304 Stainless These kettles are made from 304 grade stainless. That means you will have less corrosion issues than with a kettle made from lower grade 201 type stainless. We put these kettles through a corrosive salt water test in the MoreBeer! shop and they passed with flying colors. We also made sure the rivets and riveted handles were also made of stainless steel for a long term, trouble free life. The 10 and 15 gallon size are made from 1.0mm thick stainless steel. The 20, 30 and 50 gallon size are made with 1.2mm stainless - that's pretty thick stuff - and you will know it when you pick one up. Mirror Polish Finish The mirror polish finish isn’t just for making your Instagram feed pop! This extra slick finish is much easier to clean and sanitize than a standard brushed stainless kettle. Hop trub and other organic solids left behind after a brew day will have a hard time clinging to the interior surface and scrub away with ease. Size Ratios and Stuff All the BrewBuilt kettles follow the recent trend to a 1.2:1 ratio where the height is 1.2 times the diameter. This is a proven commercial ratio that has been adopted in homebrewing to achieve a more consistent 10% evaporation rate during the boil. We do like this ratio for boiling. For Mashing we would prefer a little bit shallower but that is a small compromise. Dimensions for a hot-liquor tank, if you are thinking brewing system down the road, are irrelevant as any ratio kettle will do. Features: Two welded T.C. couplers for a lifetime of leak free use Notched lid with silicone plug for flexibility 304 stainless steel construction for longevity 1.0mm (10 & 15 gal) or 1.2mm (20, 30 & 50 gal) thick side walls resist denting 4mm Tri-Clad Aluminum bottom sandwiched between two layers of stainless steel for no scorching Internally etched volume markers from top to bottom for easy reading 1.2:1 Ratio is optimal for boiling evaporation rate Lid is designed to conveniently hang from a handle Side handles with silicone coated handles for heat protection Stainless handles with stainless rivets for secure lifting Size Kettle ID (in.) Height (in.) 10 Gallon 13.78 16.54 15 Gallon 15.75 18.90 20 Gallon 17.72 21.26 30 Gallon 19.69 23.62 50 Gallon 23.62 28.30

Read more less

The Oxywand can be used during red wine fermentations to help promote yeast health while simultaneously reducing undesireable sulphur based compounds. The OxyWand™ comes with the 24" stainless wand with turned end, a .5 micron diffusion stone, and the nut / washer required to connect the two. The assembly is 26" long and will easily reach the bottom of glass carboys, dropped into stainless conicals, Speidel fermenters, etc.  To learn more read our MoreManual called Oxygen & Fermentation available on our website. For kit winemaking the Oxywand can also be used to degas wine by pumping in nitrogen to strip out excess CO2 left in solution.

Read more less

Cool your fermenting must or wine using this weldless, easy-to-install, 304 stainless steel cooling plate that can be inserted into the lid of any Variable Volume Fermenter. Cold water or glycol is recirculated through the cooling plates thereby reducing the temperature of your ferment. By threading our thermowell (FE616) into the extra 1/2" female coupler that comes on every MoreWine Variable Volume Fermenter and inserting the probe from our digital controller (FE610) you can use a digital controller to automatically control temperature. The controller turns a pump on every time the temperature rises above your set-point, sending coolant through the plate. To build these units we take the stock cooling plates and slide, bored-out, male-threaded couplers half-way down the feed tubes and weld them in place. You drill two 1 1/16 to 1 1/8" holes into the lid. We provide two gaskets and nuts that thread on both sides of the couplers securing the plate in place.  Plate measures 22.5"W x 47.5"H Inlet and Outlet 1/2" Male BSPP thread 300 mm long tubes Bulkheads located approx. 175 mm above the plate 1.44 Square meters of cooling surface Made from 304 stainless steel  

Read more less

The Ss Glycol Chiller | 1/5 HP, will maintain lager temps and enable crash cooling for up to 3 vessels even in relatively high ambient temperatures. We designed the chiller to integrate seamlessly with our FTSs kits to provide a complete temperature control system. Since each FTSs kit includes its own dedicated temperature controller, pump, and tubing, each vessel can be connected to the glycol chiller with its own independent loop. The parallel design of this setup offers the ability to ferment at ale temps in one vessel, and maintain precise serve or crash cooling temps in another vessel. The Glycol Chiller can also be paired with our line of Ss Brite Tanks to hold beer at serving temperatures. This system offers both flexibility and expandability for your home brewery.  Features:  Pumps not included, attach up to 3 FTSs Touch kits (sold separately) Capable of crash cooling and lagering Assuming one vessel is crash cooled at a time: Chills Up to 2 - 1/2 bbl, 14 gal Chronicals, Unitanks, or Brew Buckets Chills Up to 3 - 7 gal Chronicals, Unitanks, or 10 gal Brite Tanks Chills Up to 3 - 7 or 3.5 gal Brew Buckets Not Compatible with the FTSs Pro Series Controllers Specs: Vertical chassis layout 120 VAC 1/5 HP Compressor 1450 BTUs/Hr 4.75 Gallon Reservoir with Pressure Vent R290 Refrigerant Casters Included Made in France Dimensions: 14" W x 11" D x 27.5" H  

Read more less

The Ss Brewtech Keg WaSsher offers the homebrewer a convenient way to clean any classic Cornelius-style kegs (Corny or other similar variants).  To operate, simply remove the keg’s lid, tilt and insert the spray ball attachment into the keg’s lid opening, and then rotate the keg to secure the lip against the WaSsher’s silicone baseplate seal.  Secure the locknut and snug the entire assembly down.  Attach the two ball lock quick disconnect fittings to the gas-in and liquid-out postsensuring there are no kinks in the silicone tube.  Lastly, turn your keg upside down and put the entire assembly into a standard 5-gallon bucket that contains 2 gallons of your preferred cleaning solution, then activate the pump.  Now go grab a beer and relax while the Keg WaSsher does the rest.  No need to disassemble or remove QD posts, dip tubes, or other fittings, all parts are cleaned in place.  No more extra-long scrub brushes or elbow grease.  Since we designed this washer to fit inside a 5-gallon bucket, you can easily clean kegs in batches by setting up a wash station with 3 discrete buckets to perform cleaning, fresh water rinse, and acid sanitizer cycles.  All while leaving the washer attached to a single keg, just jump from one bucket to next until the keg is cleaned, sanitized and ready for use.  Since the Keg WaSsher only requires 2 gallons of cleaning solution, the result is less chemical waste and less environmental impact than traditional cleaning methods. Features: Hands free operation Chemical resistant submersible pump Attaches to common ball-lock Cornelius-style kegs w/ removable lids Powerful CIP spray ball Entire assembly fits in 5-gallon bucket Cleans inside of keg and ports simultaneously Easily attaches/detaches from kegs Perform clean, rinse, and sanitize steps all with the same unit

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon. The DigiMash is one of the most affordable options in all-grain electric brewing. Includes 35L DigiBoil, DigiMash Upgrade Kit, and Recirculation Pump Kit. The recirculation pump kit allows for constant recirculation during the mash, leading to better conversion and clarity. The pump can also be used for transferring wort to your fermenter. This model runs off 220V power and has dual heating elements (1900w and 500w) that can be controlled independently. Includes 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2"). DigiBoil Features: 304 stainless steel construction 9-gallon total capacity Digital temperature control 220V / 15A power NEMA 6-30R plug (5 ft. cord) Stamped-in volume markers (gallons & liters) Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 29" H x 15" W (including handles) Internal Dimensions: 19.5" H x 11.75" W Mash Upgrade Includes: False bottom Malt pipe Wire support  Malt pipe handle Malt pipe bottom screen Recirculation Pump Kit Includes: High temp magnetic drive pump Recirculation arm with male camlock Female camlock with barb fitting 1/2" FPT x 1/2" barb fitting 1/2" MPT x 5/8" barb fitting 1/2" ball valve 5 ft. length of silicone tubing 4 x hose clamps Plumber's tape  

Read more less

The Anvil Brewing Pump Replacement Head is crafted from durable stainless steel with a 1/2" NPT connection.  Perfect for restoring performance, this pump head ensures reliability and compatibility with your Anvil Brewing Pump, not the Anvil Brewing Pump-XP. Note: This listing is for the pump head only; the pump is sold separately.  

Read more less

Gravity fillers are the preferred filler for achieving exactly the same fill height in every bottle. Gravity fillers fill to a height you determine and then shut off automatically. They are dependable, simple to operate, have no electrical parts, and few moving parts. Another a nice feature of these fillers is the adjustable stainless tray that the bottles sit on can be moved up and down to account for different bottle sizes, allowing you to fill 1.5 L, 750 mL or 375 mL bottles. A favorite of small wineries, clubs, and out-of-control home winemakers. Features: Each fill nozzle is independently adjusted for fill height All parts in contact with the wine are made from 304 type stainless steel There is a drain located on the bottom for draining after use 1.5" Tri-Clamp inlet and reservoir drain Level gauge located on the side of the reservoir Approximately 3 bottles can be filled per minute, per nozzle. 36.5"H x 36"W x 18.5"D Reservoir is approximately 58 liters. Please Note This filler is not equipped with a float valve in the reservoir, as the majority of our customers supply the filler via a pump, and the float valve will not stop the flow from a running pump.

Read more less

Replacement check valve and installation instructions for 4.9 GPM Flojet pump.

Read more less

Perfect for spraying down brewing equipment with dissolved cleaners or sanitizers Attach the optional Ball Lock Keg Post Adapter to convert the sprayer into a line cleaning device Empty the large 33.8 oz tank up to 30 times on a single charge The Power Sprayer is a fantastic multi-purpose device that can be used for spraying down your brewing equipment with cleaners and sanitizers or converted into a pressurized line cleaning system. The tank features graduated volume markers and can be emptied up to 30 times on a single charge. The nozzle knob can be adjusted to turn the stream into a fine mist or a powerful jet. This product is made from food grade Santoprene, PP, PE, Silicone and stainless components. Battery Life The pump has large 18650 li-ion rechargeable battery. On a full charge the battery will empty the tank 18-30 times so it lasts for ages. If you use fine mist it will be closer to 18 times but if you use a jet/stream the battery will last closer to 30 times. Includes: 33.8 oz Reservoir Tank Power Sprayer Nozzle and Dip Tube White Plastic Adjustment Head Sprayer 6" USB-C to Standard USB Cable *Does not include USB wall charger KegLand Part Number: KL40860

Read more less

Elevate your brewing game with the Gen 4 BrewZilla. This cutting-edge system combines innovative features like wireless connectivity via WiFi & Bluetooth, allowing you to control and monitor your brew day, ensuring precision, convenience, and exceptional beer batch after batch! WiFi / Bluetooth enabled RAPT Controller tracks your brewday and automatically uploads detailed information to the RAPT portal The top mounted RAPT Controller can be tilted upward for easy viewing, or detached from the unit to mount it on the wall or placed on your bench Mirror polished dome shaped bottom with center drain -- get every last bit of wort into your fermenter while the perforated bottom screen filters out 95% of hot break and hop matter Make larger batches or higher gravity beers! BrewZilla offers the largest malt pipe capacity for units in its size range, and the Gen 4 unit has a 30% larger malt pipe compared to the previous generation Perforated bottom on the newly designed malt pipe allows for improved mash recirculation flow without sacrificing efficiency Element power percentage can be adjusted via the RAPT Controller. Go full power to heat up quickly, or dial it down so you don't overshoot your strike water temp The built-in pump is plumbed to both the recirculation and arm and the bottom ball valve. Recirculate wort during your mash, then close the recirculation valve and pump wort to your fermenter via the bottom valve Pair with the RAPT-enabled Bluetooth Thermometer, allowing your BrewZilla to calculate a core mash temperature reading and more accurately control temperatures and mash steps More RAPT-enabled accessories are coming, and future firmware updates can be downloaded to the RAPT Controller itself over the internet WiFi/Bluetooth Enabled RAPT Controller The RAPT Controller is mounted to the top of the boiler body, allowing for easy operation when you have the unit set on the ground. The controller can be tilted upwards to give you an even better view, or it can be removed from the BrewZilla entirely if you'd prefer to mount the controller on your wall or lay it down on a workbench. From the controller, you'll orchestrate your entire brew day. Program mash steps, dial in element power, and operate the integrated pump all from one screen. But the RAPT Controller is much more than a beautiful, full-color display switch board. Once synced to the RAPT Portal, you'll be able to track, record and monitor your brews online. No need for handwriting notes or punching brew day details into your phone -- all of the data from your brew is automatically logged to your portal profile. This information doesn't just include your mash profile; it also captures detailed information about your element power and pump activity, opening the door for very precise repeatability. And the RAPT Portal isn't just a digital archive for your brew days. With your BrewZilla powered on, you can control your brewery from virtually anywhere using your phone's web browser. Not sure when you'll be home from work or your kid's ball game going into extra innings? No problem! Before you head out, simply log into the RAPT Portal from your phone and tell the BrewZilla to start heating your strike water. Along with remote control, the portal enables you to program alarms and push notifications for all of your boil additions. We've all been caught up with a side task and failed to throw in that yeast nutrient or clarifying agent at the end of the boil, but the BrewZilla has the back of even the most forgetful brewer! But wait, there's more! In addition to WiFi connectivity, the RAPT Controller is also a Bluetooth gateway device. KegLand is currently developing various Bluetooth devices such as the Bluetooth Beacon Thermometer and other sensors which will be compatible with your brewery upon release. The RAPT Controller is able to receive information from Bluetooth Low Energy (BLE) devices, adjusting its processes based on this new stream of information while simultaneously logging it to your RAPT Portal. With the Bluetooth Beacon Thermometer, for example, you'll be able to feed temperature readings from the top of your mash bed to the controller. The controller will then compare this reading with the main temp probe reading at the base of the kettle and adjust element cycling based on these combined readings. Finally, the RAPT Controller WiFi connectivity allows you to update the controller's firmware with a single click. Take advantage of new features and accessories as soon as they become available by simply keeping your BrewZilla connected to your local WiFi network. And again, the WiFi is already built-in! No need to come back for an expensive add-on accessory down the road. High Capacity Malt Pipe With an approximately 23.5 lb capacity, the BrewZilla can mash nearly 50% more grain than similar sized models of the Anvil Foundry and Grainfather G30. If you want to fill your fermenter with more than a 5-gallon batch worth of wort, or brew the highest gravity beer recipes, the BrewZilla is the brewhouse for the job. And the included malt pipe is just the beginning. If you want to expand your brewery's grain capacity even further, KegLand makes Boiler Extension Kits and Extended Malt Pipes for that very purpose. The malt pipe features a perforated section at the bottom which improves mash recirculation flow without sacrificing efficiency. Concave Base with Center Draining Leave no wort behind! The concave base with center drain means you'll be able to extract every last drop of wort to your fermenter. If you've brewed in a traditional flat bottom kettle, this center drain may be a bit perplexing at first. Many brewers are used to whirlpooling after the boil to pull hop matter into the center of the kettle, then transfer out using a pick-up tube that pulls from the kettle wall in order to avoid sucking up the solids. But fear not! One of the key features of the BrewZilla is the false bottom protection screen. This screen avoids the need for doing a whirlpool, filtering wort as it transfers and blocking more than 95% of hops and hot break from getting sucked into the pump. This not only prevents blocked pump issues, it also increases the efficiency of your brewhouse by eliminating kettle loss from wort that may have otherwise been left behind. Ultra Low Watt Density Elements The concave base on the BrewZilla also allowed for larger heating elements with significantly lower watt density than other breweries. When a lot of energy is coming off of a small element, the local temperature near the element can be so high that it scorches the wort and causes caramelization. Lower watt density essentially means you can produce lighter color beers that would otherwise have fallen victim to caramelization effect. It also reduces that chance of boilovers and reduces stress on the elements which extends their life expectancy. Easy Access Built-In Pump The built-in pump allows you to recirculate your wort during the mash for improved efficiency and more even temperature distribution. But it can also be used to transfer your wort from kettle to fermenter rather than relying on a gravity feed, and with the optional CIP Rotar, you can used the pump to clean your BrewZilla (or fermenter) after every use. During your brew day you'll be able to control the pump from the RAPT Controller with a dedicated button for turning the pump on and off. Another feature you'll find on the controller is adjusting the pump flow. This doesn't control the actual volume of the flow (you can do that from the ball valve located on the recirculation arm), but rather cycles the pump on and off automatically based on your setting. At 100%, the pump remains on continuously. But at 80%, the pump will cycle to be on 80% of the time and off 20% of the time. This may not be a feature that every brewer thinks they need, but it's an excellent way to avoid running the pump dry accidentally, as the time the pump is off allows recirculating wort to filter through the grain bed and back into the pump inlet. If you flip over the boiler, you'll find the magnetic drive pump and all the plumbing is right at your fingertips. This means you don't have to disassemble the base in order to access the pump for cleaning or maintenance if required. It also means the plumbing can be changed more easily too. For instance, the unit comes as standard with the plumbing from the pump feeding both the recirculation arm and the transfer valve, but you change this so the tap outlet bypasses the pump if you prefer. MoreBeer!'s Final Word We've been selling all-in-one brewing systems ever since they first hit the market, and we have to say that the Gen 4 BrewZilla is not only the most feature-packed unit ever made, it's also offered at an incredibly competitive price point when compared to other systems. You'll get all of the cutting edge Bluetooth technology you'd get with the Grainfather and at an exceptionally lower price tag. Plus, you get the WiFi capabilities as standard, rather than as a $100 add-on accessory. When it comes to mash recirculation, that's yet another built-in feature on the BrewZilla, and the pump can also be used for transferring and CIP cleaning. The Foundry has a great starting price, but if you want to unlock its full potential, you'll need to spend another $100 for the recirculation pump kit. What's more, no other system in the same 'weight class' has the same grain capacity. And if the standard capacity isn't quite enough, the BrewZilla can be easily upgraded with a Boiler Body Extension Kit and Extended Malt Pipe. When you purchase the BrewZilla, you can feel confident that you're investing in a top shelf system and all of the critical features you're expecting will be included. Perfect for Distillation If you want to expand your lineup of homemade libations to offer Spirits in addition to Ales & Lagers, the BrewZilla makes an excellent pot still! Add the Distillation Lid upgrade and pair it with an AlcoEngine Copper Reflux Condenser or Copper Pot Still Top. AlcoEngine Stills have been selling on the home market for years and offer some of the most affordable, beginner-friendly stills you'll find. Features: Gen 4.1 Stainless steel construction 9 gallon total capacity with a finished beer output of 5-6 gallons WiFi/Bluetooth Enabled RAPT digital temperature controller Automatic step mashing with 6 programmable stages 110-120V power and plug 12.5A Requires 20A circuit Dual heating elements (1000 watts and 500 watts) Stainless steel 1/2" ball valve for gravity draining or transferring via pump Immersion wort chiller included Stainless steel malt pipe/basket Stamped in volume markers Glass lid Adjustable lid clamps (do not use with glass lid in place - see below) Magnetic drive pump for recirculation, transfers, and cleaning Recirculation arm PPSU sight glass Bottom handle for easy lifting and pouring Rubber feet Temperature reads in °F or °C Approximately 32.75" H (with recirculation arm) x 12.5" D Recommended max. grain bill: 23.5 lbs AlcoEngine Still ready with the purchase of a Distillation Lid Pump Specs: Max Capacity: 2.9–3.1 gal/min Max Head: 4.9–6.8 ft. Poles: 2 Voltage: 110–120V-AC Frequency: 50–60Hz Power: 6 watts Current: 60 mA Speed: 2600–3000rpm Duty Cycle: Continuous Capacitor: 2µF Input/Output: 13mm barb Water Resistance: IPX2 You Will Need: 2' of H985 1/2" ID Silicone tubing for sparging and draining. To connect included Chiller: (20') of D1710 1/2" ID beverage tubing (or whatever length required, (3) H950hose clamps and (1) brass hose by thread adaptor (H508). These items come in the Wort Chiller Connection Kit, add the kit to your cart and use code ZILLAKIT at checkout. KegLand Part Number: KL3276 Please note: due to patent restrictions in the United States, the malt pipe has been redesigned with one set of bottom feet. This model does not include the "two stage" malt pipe as advertised by KegLand and featured in previous MoreBeer! YouTube videos. Please Note: When removing the malt pipe to drain after mashing, it is important to do so slowly rather than in one swift pull. If the malt pipe is removed all at once when it is full of wort, it is possible for the draining wort to spray out and over the rim of the brewery through the perforated bottom. Remove the malt pipe slowly so that some of the wort can drain out before it is fully removed and set on its bottom feet. This can be done by hand on the 35L unit, but for the 65L and 100L units we highly recommend using the Pulley System for removing the malt pipe. Warning: Do not engage the adjustable lid clamps when brewing with the BrewZilla's standard glass lid. The clamps are only intended to be used with distillation lids or other metal accessories. With too much tension, it is possible for the lid clamps to break the glass lid when engaged. Warning: If you are going to use an extension cord with the BrewZilla, you must ensure that the cord is the correct gauge and properly rated to suit the power requirements of your brewery. See the reference chart below for the recommended gauge based on your unit and the length of cord you wish to use.   35L (110V) 35L (220V) 65L (220V) 100L (220V) 10 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 25 ft. 14 Gauge 14 Gauge 12 Gauge 10 Gauge 50 ft. 12 Gauge 12 Gauge 10 Gauge 8 Gauge   RAPT Gen 4 BrewZilla | User Manual

Read more less

Counter pressure can filler for carbonated beverages CO2 purge cycle prior to fill reduces head space O2 Flow stops automatically at the desired height Suitable for standard 12 oz and 16 oz cans as well as tall 19.2 oz cans Made to order in the United States The XF4500C counter-pressure can filler is designed for the Artisan Craft Person looking to can carbonated beverages in a simple way. The carbonated beverage filler is a counter pressure can filler that fills cans from a pressurized source, such as a keg, without losing carbonation; using a sensor probe that shuts off the fill at the desired height. This filler was designed to be technically sophisticated, while operationally very simple. Even though this machine is designed for carbonated beverages, such as beer and kombucha, it can also be used for still products, using a pressurized keg or pump. The XF4500C can be used with can sizes that have the standard 12 and 16 oz lid opening, including tall 19.2 oz cans, allowing great flexibility. The XF4500C requires that you also have an air compressor, which is used to hold the can rest in place, a canister of CO2, to pressurize and carbonate your tank or keg, and a pressurized container, to allow your product to flow from high to low pressure, through the machine. Each beverage filler is hand built to order in the California factory. Lead times average about 3 weeks. Features: One-person, ergonomic canning operation Adjustable fill height and level sensor for consistent filling Adaptable to various can sizes Easy to clean CO2 purge cycle prior to fill reduces head space O2 Greatly reduce product waste from overfill Can be used for both nitrogenated and carbonated products Light, stainless steel and anodized aluminum construction All materials in the beverage flow path are FDA certified as food grade for contact with alcohol Specifications: Applications: beer, kombucha, soda, sparkling wine, cider Capacity: 360 cans per hour (12 oz) Weight: 40 lbs Dimensions: 16" wide x 21" high x 15" deep Requires 2.0A of 115V 50/60Hz power  

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory.   The KOMOS DraftMaster is a perfect solution for small beer-serving establishments. This is very unique, dual purpose glycol beer chiller, with the ability to chill a trunk line while also being able to cool 4 additional unfrigerated beers inline. It features 4 built-in stainless steel draft coils that remain submersed in a glycol solution reservoir, as well as a dedicated submersible draft line pump that can be used to pump glycol solution through flooded draft towers or other draft line chilling apparatuses.   The draft coils are made from 8 mm OD stainless steel tubing. The inlets and outlets come ready for use with 8 mm Duotight fittings, or standard hose clamp / compression fittings if preferred. The temperature drop of the beverage after one pass through the coil will depend on several factors, such as the temp of the pre-chilled beer, reservoir solution, and ambient environment. Ideally, the DraftMaster should be used in ambient temperatures below 80°F with a 30% glycol solution. If operating the unit in hotter climates or with a non-glycol cooling solution, if you are using the inline chilling coils you may need to pass the beverage through two coils to lower it to serving temperature.   Although the DraftMaster is ideally used with propylene glycol to lower the cooling solution below 32°F, home users may find it works perfectly well with 100% distilled/RO water. We recommend leaving the reservoir temperature at or above 38°F when using water only, which will work well for cooling a single KOMOS Cobra tower or other glycol-ready draft tower.   Specifications: 4 built-in 8 mm OD stainless draft coils Submersible pump: 35 watts Max Head: 21 ft. (6.5 m) Max Flow Rate: 528 GPH (2000 LPH) 30L / 8 Gallon Water Tank Capacity 3/8 HP compressor 750 Watt/2600 btu Cooling Capacity Draft coils made from 304 stainless steel Labeled IN and OUT bulkheads r134a Refrigerant 110V (3.6 amps) Dimensions: 16.1" x 16.1" x 26" Wheels included CE Certified   Warning: do not set the reservoir temperature controller lower than 25°F (-4°C). Running the chiller below this temperature may damage the unit.  

Read more less

The Straight Barb Fitting is an optional replacement to the Elbow Barb Fittings that come standard on the Super Transfer Pump (H308).

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug.  It has a 1/2" Hose Barb on the other end for attaching any 1/2" ID tubing.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 1/2" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

Positions #8 and #9 for the Euro 60 wine pump. See the attached diagram.

Read more less

Built-in self-priming diaphragm pump is non-aerating & gentle on your wine Flow stops automatically at the preset fill level Adjustable shelf to accommodate a wide range of bottles Optional gas flush system & variable flow control Made to order in the United States If you're looking for a fast, gentle, reliable, professional quality fill for your wine, then this is the filler for you. Hand-made to order by XpressFill in southern California, these fillers represent the very best available to winemakers. This filler features a built-in self-priming diaphragm pump to draw your wine from your tanks or barrels up to the filler. The action of the diaphragm pump is non-aerative and gentle, and it has the capability of pulling your wine from quite a distance away. The nozzles on XpressFill's Level Filler are independently actuated by microswitches when a bottle is put in place for filling. Flow stops automatically at the preset fill level. This makes it easy to put half the bottles on for filling and take the other half off for corking without having down time in between. The bottle shelf is adjustable in height to accommodate a wide range of bottles. Fills approximately 400 bottles/hr. Add the optional Gas Flush System and the filler will automatically gas-purge your bottles prior to filling. There is no additional button to push or lever to flip, the filler handles it all! Features: Made To Order In USA Built-in self-priming diaphragm pump Diaphragm pump is non-aerating & gentle on your wine Nozzles are independently actuated by micro-switches Flow stops automatically at the preset fill level Bottle shelf is adjustable to accommodate a wide range of bottles Optional Gas Flush System & Filler to automatically gas-purge bottles prior to filling 4 Spout fills approximately 400 bottles per hour  

Read more less

Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. An upgraded version of the FCS Starter Kit w/ Density Sensor is also available. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity*, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System. FCS Display Module and FCS I/O Module with power supply 1 temperature sensor (TC 1.5" 160mm) 1 pressure sensor with gas out solenoid All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A ball clamp and a connecting rod. An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300l+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Rembember clamps/gaskets. If you don't have a Brewtools Unitank, we recommend getting TC 1.5" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC34mm + M12, DC24V Ø2.0 Temp Sensor, PT100, TC 1.5", 160mm Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m Cable, LP12 3-pin, 3m Cable, LP12-pin, 3m Adapter, LP12-pin to DIN 43650 Type B Recommended Separate Parts: Solenoid valve for cooling with adapters/cables or submersible pump Ball Mount connector and pipe clamp etc. Airlock (Top mounted or barb with silicone tube) Adapters and fittings to fit your tank Brewtools Product Number: 7713567

Read more less

Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more inventory. Cooling & heating in one premium quality unit Control fermentation temperatures, cold-stabilize insulated tanks, or heat tanks during cold weather Fill from the exterior without the need to remove covers or panels Program and monitor temperatures via the digital controller Non-Return Kit installed as standard to prevent backflow when positioned below your tank jacket, heat exchanger, or piping system Four locking casters offer ease-of-mobility when moving the unit around the winery 3 Ton / 36,000 Btu cooling capacity 230V, 3 Phase power Made in Germany by Kreyer Cooling and Heating in one unit! Every Winemaker can appreciate the benefits of precise temperature control during all stages of production. This mobile unit allows you to easily control your ferment temperatures, heat your tanks during winter to expedite Malo-Lactic fermentation, or cold-stabilize your white wines. This unit can be used as portable unit in a larger winery or as a fixed system supplying a glycol loop in a smaller winery. Unit is used for heating or cooling but cannot supply both at the same time. Manufactured by Kreyer, the World's leading producers of wine-cooling equipment. Note: This unit runs off 230V 3 phase power. It will not run off 208V. Uses: Cooling of must for cold soaks, slow starting ferments Heating up must after a cold soak period Cold Stabilization of tartaric crystals Controlling fermenting temperatures through cooling or heating Maintaining storage temperatures in tanks/barrels Check out these features: Cools or Heats 3 Tons (36,000btu) of cooling power (larger Chilly Max's are available) .85 Tons of heating power Can cool glycol/water bath down to -10C/14F or up to 42C/107F 230v 60Hz 3 phase supply voltage drawing 19.3 amps Rolls on four locking casters Sheet metal housing, electrolytic galvanized high surface quality, powder-coated and abrasion-resistant casing 7 Gallon Insulated Plastic glycol/water reservoir Easy to fill from outside Evaporator coil made of stainless steel High-quality Grundfos recirculation pump Built in pressure switch shuts down recirculation pump when not needed Digital Thermostat Lifting/Crane Hooks for transport All panels remove for easy access All units pass multiple tests prior to shipment German Engineering Controlled by compact PC boards with a temperature accuracy up to 0.1 degree Celsius. 33"L x 25"W x 31.5"T Unit has 1" Male BSP w/ 3/4" Female BSP inlet / outlet 6 Month Electrical Warranty 1 Year Mechanical Warranty CE Certified Please Note: This unit REQUIRES 230 v Three Phase power and will not function on anything else. Please confirm that you have the proper power for this unit before purchasing, and plan to have a qualified electrician wire the necessary plug to the cord. Available in larger sizes. For additional product options View the resource.

Read more less

FDA approved food grade tubing for transferring liquids. Made of Vinyl (PVC). Will not impart flavors or odors into your product. 7/16 inch ID tubing is recomended for use with 1/2 inch Auto Siphons. Thin wall tubing is recomended for siphoning and transferring liquids. For pumping, keg lines, or other pressurized applications, see our thick wall and keg tubing.  

Read more less

Need clearer wort? Quicker chilling times? Perhaps higher hop utilization during flameout? Achieve all these desires and more, with the new Weldless Whirlpool Arm by Fermentap! Designed for installation underneath the handle of your kettle, this piece of equipment will allow you to achieve a perfect whirlpool in your Boil Kettle. Simply pump your wort from your ball valve, into this piece, which will jet around the inside of the kettle, forming a strong whirlpool. The advantages to a whirlpool are many. It will settle Trub in the center of your kettle, making it easy to pull clear wort from your ball valve. The whirlpool will result in a much higher chilling efficiency if using an immersion chiller, due to the increased turbulation of wort. On top of this, the increased flow will result in higher extraction of hop oils and flavor during flameout additions! The Fermentap Weldless Spigot is made of 100% stainless steel, ensuring it will be used in your brewing for years to come. It features a 1/2" Full Port ball valve and a 1/2" barb. The inner barbed elbow is 3/8". The bulkhead is a specifically engineered piece of stainless, made for brewing! It features a 1/2" MPT outlet for hooking up your ball valve directly, along with FPT on the inside for connection of any brewing accessory you might want! You will need to drill a 1" hole for installation of this weldless spigot. We recommend a Step Drill Bit for this.   Please note: this item is a kit of our Weldless Ball Valve and a MPT x Barb Elbow fitting. You will need to to thread the elbow into the bulkhead after installing it on your kettle.  

Read more less

A set of "elbows" is great for connecting hoses to a pump so they run parallel to each other. With 2" and 3" hose, this dramatically reduces the space needed to allow the pump to pass. In addition, having the lines run parallel makes the pump more agile when moving around the brewery or winery when connected. 304-type polished stainless.

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Female Socket, which can connect to any H501 Series Male Plug.  It has a 3/8" Hose Barb on the other end for attaching any 3/8" ID tubing.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade. All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Female Socket Quick Disconnect 3/8" Barb Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less

Can be added to the PMP100 to slow down flow on command. Can reduce flow by up to 25% by taking liquid from the output and redirecting it back to the input. Also good if the pump is encountering back pressure in your particular set up. Has 1.5" TC connection on both the in and the out.

Read more less

Use this barbed fitting with our 1/2" ID Silicone tubing for a better fit. Because Silicone tubing is soft and flexible it actually fits much better on this over sized 5/8" OD barb than on a 1/2" OD barb. Designed and made in house to maximize flow this fitting is also perfect for use when a March or Chugger High-Flow pump as it allows a larger volume of wort to enter the pump, decreasing instances of cavitation.

Read more less

Advanced Modular Control System: Designed for homebrewers and microbreweries, the Brewtools FCS brings industrial-level precision with features like temperature, pressure, and gravity monitoring for ultimate brewing control. Comprehensive Starter Kit: Includes essential components such as FCS Display and I/O Modules, temperature and pressure sensors, and all necessary cables and adapters to start customizing your fluid control setup. Automated Fermentation Profiles: Automate cooling, heating, and pressure management with software-driven profiles, simplifying complex processes while ensuring consistency in your brews. Expandable & Customizable: Add solenoids, pumps, airlocks, and adapters to fit your specific brewing needs, compatible with both Brewtools and non-Brewtools tanks. Constant Monitoring & Alerts: Early warning notifications for equipment issues like solenoid valves or heating elements ensure smooth operation and protect your brewing investment. This version of the FCS Kit includes the Density/Temp Sensor which replaces the temperature-only sensor in the basic FCS Starter Kit. FCS is a modular control system designed, developed and manufactured by Brewtools in Norway. The vision behind the system is to take industrial technology and make that available for microbreweries and homebrewers. Using the latest electronic component technology and clever software engineering, Brewtools is able to make features that used to be very expensive and complicated available for everyone. The system can measure temperature, pressure, density/gravity*, level* and power consumption and based on that — control cooling, heating, pressure/CO2 in, pressure/CO2 out, agitation*, automatic hop additions* under pressure and more! Fermentation profiles will automate the whole process and give you ultimate control of your fermentation process. (*Not available at first launch.) The system will also constantly monitor the process and notify you if something isn't right. For example, the system will measure the current draw of solenoid valves and heating elements, and will notify you if these components aren't working as they should. Please Note: The software is currently in a state of early adopter beta, and should not be used for critical production. Brewtools will continue to develop software and new sensors/actuators based on customer feedback and requests. If you cannot find a sensor or actuator that fits your setup, please reach out to us and let us know. Note that we do not take responsibility for any lost/destroyed beer or raw materials. Brewtools FCS Starter Kit The Brewtools FCS Starter Kit includes all the essential parts to get you started setting up your own custom-designed Fluid Control System. FCS Display Module and FCS I/O Module with power supply 1 density/temp sensor (TC 1.5") 1 pressure sensor with gas out solenoid All cables and adapters needed (3m length) The kit does not include a valve/pump for cooling as these are tank dependent, and you may already have a solenoid for your existing glycol loop. For non-Brewtools tanks, you also may need an adapter and/or tee to connect the spunding valve/pressure sensor assembly. Accessories To complete your FCS kit setup, some accessories are needed. A solenoid for cooling (Ø4.5mm - 34mm or 1.5") with 2-pin LP12 cable and DIN43650 Type A adapter or a submersible pump (comes with cable). A ball clamp and a connecting rod. An airlock for the pressure out solenoid valve is recommended. For smaller tanks we recommend our polycarbonate airlock. For larger tanks (300L+) you should use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent. Tri-Clamps and gaskets. Based on your tank and setup, you may need some extra tri-clamps or gaskets. For MiniUni+, you need to replace the Mini Spunding valve with an M24 to Tri Clamp adapter and a 90 degree TC34mm elbow to fit your spunding assembly (if you want to use our TC air lock. No need for elbow if you use tubing as airlock). Remember clamps/gaskets. If you don't have a Brewtools Unitank, we recommend getting a TC 1.5" to 34mm adapter for the spunding setup. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. Setting Up the FCS for Your Tank Mounting To mount to your tank a ball clamp and a connecting rod are very useful. This will work with most any size or style tank. Solenoid Valve & Related Connection Hardware for Cooling For Brewtools tanks that use 34mm connection you will need a Ø4.5mm - 34mm solenoid valve. For BrewBuilt, Spike, Ss BrewTech, or Commercial tanks you will need a TC 1.5" to 34mm adapter and 1.5" TC Solenoid Valve. Either way, you will need a 2-pin LP12 cable and DIN43650 Type A adapter to connect the solenoid valve to the Brewtools FCS I/O Module. Would You Like a Visible Air Lock on the Spunding Valve? The Brewtools pressure relief solenoid spunding valve releases CO2 at the set point you choose on your controller. To visually see the CO2 release, adding on an airlock for the pressure out solenoid valve is a nice option. For tanks under 300L, we recommend the 34mm polycarbonate airlock that connects to the Brewtools Solenoid Valve. For tanks larger than 300L, you should use a blowoff. For blowoffs, use a TC34mm to 12mm barb and a 10x16mm silicone tube or equivalent ran into a bucket of water. You will also need a 34mm Tri-Clamp and 34mm gasket. Tees and crosses are also available in multiple sizes to give you more ports. For the MiniUni+ For MiniUni+, you need to replace the Mini Spunding Valve with an M24 to TC adapter and a 90-degree 34mm TC elbow to fit your spunding assembly (if you want to use the TC air lock. No need for elbow if you use tubing for a blowoff). You will need the clamps/gaskets to make the connection. Starter Kit Included Parts: FCS Display Module, 5" FCS I/O Module 2x RTD, 5x CAN, 4x Relay Power Supply, 24V 40W, LP12-pin Pressure Sensor, CAN BUS 24V, M12 Solenoid valve, TC34mm + M12, DC24V Ø2.0 Density/Temp Sensor, TC 1.5", CAN BUS 24V Cable, LP12 6-pin, 3m Cable, LP12 5-pin, 3m (2 pcs) Cable, LP12-pin, 3m Adapter, LP12-pin to DIN 43650 Type B Recommended Separate Parts: Solenoid valve for cooling with adapters/cables or submersible pump Ball Mount connector and pipe clamp etc. Airlock (Top mounted or barb with silicone tube) Adapters and fittings to fit your tank Brewtools Product Number: 7713792

Read more less

Cleaning balls are super handy for scrubbing the inside of your transfer tubing. Simply insert into the end of the suction-side tubing connected to your pump and turn the pump on. Be careful not to draw the ball in to the pump head. For the outlet side of the pump, disconnect the tubing from the pump, insert the ball, reattach and turn on the pump. for best results repeat several times on each side. If stains persist, fill your lines with a warm PBW solution and let sit for about an hour before scrubbing again. Available in sizes for 1/2", 1", 1.5" and 2.5" inner diameter tubing.

Read more less

The LinkTech 60PS Series is a lineup of premium plastic Quick Disconnects.  These High Quality QDs are made from medical grade polypropylene, a high-strength plastic that is temperature tolerant 160° (Max!), and can handle pressure ranging from a vacuum to 60 psi. All of the 60PS Series will interconnect, and these units will also work seamlessly (and leaklessly!) with CPC Quick Disconnects of the same internal 3/8” flow path.  O-rings are a EPDM Rubber, and internal valve springs are constructed from 316 Stainless steel. This is a Male Plug, which can connect to any H501 Series Female Socket.  It has 1/2" Male NPT threading for use with any products equipped with 1/2" Female NPT.  This QD is equipped with a shutoff valve.   When not connected to another QD, this will not allow any flow.  While not quite as bulletproof as our Stainless Steel Quick Disconnects, this lineup does offer a few advantages.  These can be set up with Shutoffs, which will prevent flow when disconnected, and can be incredibly useful on Pump or Glycol systems.  The pricing of these products is more economical, yet the plastic is still medical grade.  All in all, these are a premium lineup of quick disconnects with great features and lots of options. Features: LinkTech brand 60PS Series Equipped with Shutoff Valve Connections: Male Plug Quick Disconnect 1/2" MPT Medical Grade Materials: Body: High-Strength Polypropylene Spring: 316 Stainless Steel O-Ring: EPDM Operating Pressure: Vacuum to 60 PSI Temperature Tolerance: -40 to 280°F (-40 to 138°C) 3/8" Flow Path Interchangeable with CPC - Colder HFC35 Series

Read more less