Beer Making
-
Yellow Caps
These Oxygen Absorbing beer bottle caps have a special liner that absorbs oxygen in the bottle's head space. This helps reduce the oxidation that happens during the bottling process, keeps your home brewed beer tasting fresher, and can extend it's shelf life. Important to note: It is recommended that you only sanitize as many caps as you'll require at the time of bottling. The oxygen-absorbing agent is activated when the cap gets wet. If wetted caps are saved for later use, they'll still function as a normal cap, but the oxygen absorbing agent may be depleted.
$3.49
-
German Pilsner Malt - Weyermann® Specialty Malts
1.6 L - Weyermann® German Pilsner malt. A classic German Pilsner malt that is a great base for all German Lagers as well as Belgian beers. German Pilsner malt will contribute a substantial body and mouthfeel when used as a base malt. (1.6°L) If this malt is currently out of stock or you'd like to try out a different maltster, please see the substitution chart below. Viking Malt - Pilsner GR90 Briess Malting - Pilsen GR31 Canada Malting - Superior Pilsen GR671 Great Western Malting - Superior Pils GR309 Weyermann® Specialty Malts - Bohemian Pilsner GR347 Rahr Maltings - North Star Pils™ GR313 Dingemans Malting - Belgian Pilsner GR340 BestMalz - Pilsen GR414 Admiral Maltings - Admiral Pils GR710
$3.89
-
Wyeast | 1056 American Ale® | Beer Yeast | Activator Smack-Pack System™ | 100 Billion Cells
1056 is a very versatile yeast for styles that desire dominant malt and hop character Very clean, crisp flavor characteristics with low fruitness and mild ester production Activator Smack-Pack System™ "proofs" the yeast and shortens lag time when it hits your wort When smacked, the Activator™ packet releases sugars and nutrients to initiate the culture's metabolism Wyeast has been a pioneer in craft brewing for over 35 years and is committed to creating the finest fermentation products available Although beneficial, cultures do not need to be activated prior to inoculation Very clean, crisp flavor characteristics with low fruitiness and mild ester production. A very versatile yeast for styles that desire dominant malt and hop character. This strain makes a wonderful “House” strain. Mild citrus notes develop with cooler 60-66°F (15-19ºC) fermentations. Normally requires filtration for bright beers. Please note that 1056 American Ale has been known to bloat when shipping due to the yeast "off-gassing". Please put this yeast in your refrigerator when received, as the yeast will be fine and should still be viable. To view Wyeast's FAQ on what to do with bloated packages, please visit the following link: Wyeast's FAQ Attenuation: 73-77% Flocculation: Low Medium Alcohol Tolerance: 11% Optimum Fermentation Temp: 60-72°F Cell Count: 100 Billion Styles: American Amber Ale American Barleywine American Brown Ale American IPA American Pale Ale American Stout Braggot Brown Porter Christmas/Winter Specialty Spiced Beer Cream Ale Dry Stout Fruit Beer Imperial IPA Irish Red Ale Other Smoked Beer Russian Imperial Stout Spice, Herb, or Vegetable Beer Strong Scotch Ale Wood-Aged Beer For best results we always recommend ordering an ice pack with your liquid yeast. Please Note: When choosing an ice pack option beware that the liquid yeast will not arrive cold even when shipped together. Ice packs and insulated mailing options are designed to keep the yeast colder for longer during shipment, but they will not ensure that your yeast arrives cold. We will not replace liquid yeast that arrives warm. During warmer months we strongly recommend you choose dry yeast.
$13.99
-
Mash Paddle - 36 in. Stainless Steel
Having problems stirring your mash? Not with this new 100% Stainless Steel Mash Paddle! At 36 inches long, this paddle is perfect for any size mash tun. The paddle itself is a solid piece of stainless steel - no holes in it at all. Since there are so many different theories about mash paddle design, we felt it best to let you decide the pattern of holes. If you like, we do offer one configuration, the AG431A.
$30.99
-
Duotight Ball Lock QD Beverage Out | Quick Disconnect Bev Out Push-In Fitting
The humble plastic ball lock disconnect has been around a long time and is used by countless homebrewers around the world. Despite the extensive use they have seen little to no innovation for decades and KegLand wanted to change this. Enter the Duotight Ball Lock QD. The integrated Duotight design means you can connect your beer and gas line directly, easily and reliably with no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitizing an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings (no cheap ABS plastics here) this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitizers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required. Duotight Ball Lock QDs are offered in three sizes that correspond to the outer diameters seen on our line of EVABarrier Draft Tubing. 6.35 mm OD – features a very tight 3 mm ID that requires only 3.2 ft of length for adequate flow resistance. This is the ideal size for mobile draft or if you want to keep your kegerator as tidy as possible. 8 mm OD – the most common OD size of EVABarrier tubing. This size comes in two IDs (4 mm & 5 mm) and pairs up with the lion's share of Duotight fittings and accessories. 4 mm ID is our most recommended size for beverage lines, requiring 5-6 ft. lengths. 5 mm ID is commonly used as gas line or when 10-12 ft. beverage lines are required. 9.5 mm OD – suitable for gas lines or long draw beverage lines. At 6.3 mm ID, this size is ideal for beverage lines that will be 20 ft. or longer in length. Features: Ball Lock Quick Disconnect - Bev Out Direct connect EVABarrier tubing Compact design won't interfere with keg stacking Made from highly chemical resistant materials Dissamble by hand for quick and easy cleaning Three sizes available: 6.35 mm (KL24235) 8 mm (KL20749) 9.5 mm (KL20763)
$8.79
-
Blichmann Engineering QuickCarb Keg Carbonator
Due to high demand, this item is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this item to you when we receive more in late July. The Patent Pending QuickCarb™ keg carbonator from Blichmann Engineering™ is a revolutionary simple new way to carbonate a 5 gal keg of beer in less than an hour! This patent pending product uses a simple circulating pump and a unique stainless steel diffusion stone to carbonate your beer precisely and quickly. And with no chance of accidentally overcarbonating your beer! 90% carbonated and ready to drink in less than an hour with no risk of overcarbonation! Let it sit for a day for dialing in that final few percent. Quiet and dependable operation Great for all beer styles! All stainless diffusion stone and QuickConnector™ fittings makes cleaning a breeze 10 micron stainless diffusion stone is durable, and is porous enough to allow sanitizer to fully penetrate. Other manufacturers stones are delicate and must be boiled and handled with gloves. Circulating pump is gentle and is powered with a simple DC transformer (included) Easy to clean and sanitize Interested in trying out inline oxygenation? Simply add an optional oxygen regulator and you'll be able to use the QuickCarb™ components to oxygenate your wort before pitching your yeast!
$218.99
-
Galaxy® | Pellet Hops
One the most popular hops in craft brewing today, Galaxy hops are adored for their huge oil content and pungent citrus and passionfruit flavors. This single hop variety accounts for the majority of hop yield coming from Australia, and is still one of the more difficult hops to get your hands on. It's so popular that we have to contract for it years in advance, so be sure to shore up your supply when it's in stock! This tantalizing dual purpose hop can be used up and down the hopping schedule and is an absolute stunner when used late in the boil, whirlpool, or dry hopping. Expect big aromas of peach with hints of pineapple and tropical fruit. Use liberally in all hop-forward styles, including IPAs, Pale Ales, Hazys, hoppy lagers, or any beer where you want to add a little tropical twist. Hop Statistics: Alpha Acids: 13.5 – 14.8% Beta Acids: 5.8 – 6.0% Alpha-Beta Ratio: 2.25 – 2.55 Cohumulone: (% of alpha acids): 35% Total Oils in mls per 100 grams dried: 2.4 – 2.7 Similar Hop Varieties: Citra® Galaxy® is a registered trademark owned by Hop Products Australia. Citra® is a registered trademark owned by Yakima Chief Hops, LLC.
$2.99
-
Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 8 mm (5/16 in.) Reducer
This Duotight reducer fitting can be attached to the Intertap Short Shank with 1/4" Duotight compatible barb (D1242). Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Also attaches to the Plastic Ball Lock Cap, allowing the cap to be used with 8 mm OD EVABarrier. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07481
$2.79
-
Stainless - Weldless Ball Valve
Do you have a kettle or cooler but would like the ease and convenience of using a ball valve to easily drain liquid? Are you a Do It Yourself Type person? At a fraction of the cost of having a spigot welded into your kettle you can drill a whole and install a weldless ball valve. The problem with most weldless fittings is they are thrown together from assorted hardware. Common issues include leaking and lots of flex when you use the ball valve. These new weldless fittings feature are designed for brewing. There is no comparison to the weldless fittings of yesterday with their rock-solid feel and a solid leak free connection. This unit is also unique in that it feature 1/2" female threads on the inside. This allows you to thread in various other fittings that you can see below. Want to later make a mashtun... no problem just thread in our stainless screen. want to fully drain your boil kettle? No problem, just add our kettle maximizer! This allows for unlimited flexibility. Weldless kit includes a 1/2" Full Port ball valve and a 1/2" barb. All fittings are made from 304 type stainless steel for a lifetime of corrosion free use. Full installation directions included. This product replaces our WL101. Manufactured by Fermentap. You will need to drill a 1" hole in your kettle for installation of this weldless spigot. We recommend a Step Drill Bit for this. For cooler installation instructions, please see "Installing A Weldless Spigot In Your Cooler" under the documents tab.
$38.49
-
Brewmaster 5 Gallon Stainless Steel Kettle
This small 5 gallon kettle is a great kettle for the beginning brewer to learn on, as it holds a manageable sized batch and it's available for a very affordable price. It is also perfect for the craft brewer who enjoys making several small batches instead of one large batch. This brew kettle is high quality 202 stainless steel. It features 0.5-mm thick sides and bottom, and riveted stainless steel handles. This 5 gallon kettle can safely hold up to 3 gallons of wort while boiling, making it the perfect size for extract brewing right in your own home! Features: 0.5mm thick stainless sides and bottom 10" H x 12.5" D Riveted handles on kettle body Kettle lid with riveted handle 5 gallon full capacity (3 gallons while boiling) Perfect size for partial boil extract brewing!
$32.99
-
1/4" Tailpiece, Hex Nut, and Gasket
Perfect addition when purchasing a new sanke style keg coupler or tap. New taps typically come with the correct fittings for your gas line but not your beverage line. These are those fittings! Used to connect 3/16" or 1/4" beer line. To connect 3/16" beer line tubing it is helpful to heat the tubing end in hot water.
$6.29
-
Black Oxygen Barrier Bottle Caps | 29mm | Magnum Champagne Bottle Crown Caps
Due to high demand, the case size is currently out of stock. Be the first to receive your items by placing a pre-order today. We will automatically ship this to you when we receive more in late December. Extra wide 29mm crown caps Used for capping magnum champagne bottles and other specialty bottles with a wider neck opening Oxygen barrier liner protects your beverage from oxygen ingress For magnum champagne and other specialty bottles that require a 29mm crown cap. They feature an oxygen barrier liner that helps protect your beverage from oxygen ingress after capping. These bottle caps are not compatible with standard beer bottles.
$4.39
-
Gnome Root Beer Soda Extract
A quick and easy way to make smooth delicious root beer at home! Gnome is a mellow Root Beer with a big, round flavor. It finishes up creamy and delicious. Totally subdued when compared with Zatarain's. It has a lot of followers including us. Great for company, kid parties, and more! 4 oz package makes up to 5 gallons of root beer. One gallon size makes up to 160 gallons or root beer.
$15.99
-
Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread
This Duotight to Female Beer Thread (5/8" BSP) fitting can be used to connect beverage line to faucet shanks instead of a tailpiece, and it's also a convenient option for connecting gas and beverage line to the gas in and bev out on keg couplers. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Faucet shank and keg coupler not included. Kegland Part number: KL06903
$4.79
-
Sight Gauge - 1.5 in. TC
This is a 1.5 in. TC sight gauge. It's small compact design makes it easy to put inline anywhere during the brewing process. Made from 304 stainless steel and breaks down for easy cleaning. 2.2 in. long.
$39.95
-
Bitter Orange Peel
Used to spice Belgian style beers, especially Witbiers. This is the bitter type of orange peels, not the sweet type.
$2.49
-
Replacement Lid Strap for Speidel Plastic Fermenters - 60L (15.9 gal) & 120L (31.7 gal)
This is the replacement strap that holds the lid onto the body of the Speidel Plastic Fermenters. While this is not a piece which should wear out, we've seen these take damage, and eventually need to be replaced. This strap fits our 60 l (15.9 gal) & 120 l (31.7 gal) Speidel Plastic Fermenters.
$14.99
-
CellarScience® SilaFine | Beer Fining Agent
SilaFine is an easy-to-use, vegan friendly fining agent that quickly creates crystal clear beer by removing yeast and haze-forming particles. SilaFine is a unique, negatively charged silica sol fining agent that binds with and positively charged haze active proteins and polyphenols as well as yeast cells. SilaFine does not target foam active head forming proteins, leaving beer foam in glass unaffected. Use: Add 10ml or 1 tbsp per 5 gallons of finished beer. Gently rouse the beer to fully disperse the clarifier. Most effective on beer that has been chilled below 39°F. If the beer has not cleared after 24 hours, a second dose can be added. SilaFine should be stored cool, but do not freeze. Whirlpool: SilaFine can also be used in the whirlpool at a rate of 0.5-1ml per gallon to achieve a quicker and more compact sedimentation in the kettle. Additional Notes: SilaFine is based on a special selection of commercial grade amorphous silicon dioxide, also known as silica sol, at a concentration of 30%. Silica sol is known by a few names in brewing including colloidal silica, acidified silicates, silicon dioxide, and silicic acid. Unlike some other silica sols, SilaFine is not treated with aluminum oxide. SilaFine is a pure mineral and complies with Reinheitsgebot German beer purity law. Do not freeze. Store in a cool, dry place away from direct sunlight and heat. The recommended shelf life is 12 months from the date the package is opened. Allergen Free GMO Free
$3.49
-
Cane Sugar
Cane Sugar, or Sucrose, is made of one glucose molecule and one fructose molecule bonded together. Commonly used for chaptalization (adding sugar to increase alcohol potential). Yeast cannot ferment sucrose directly. It first secretes an enzyme (invertase) that splits sucrose into glucose and fructose before uptake.
$3.99
-
Fermentis | SafLager™ W-34/70 Bohemian Lager | Dry Beer Yeast
This famous yeast strain from Weihenstephan in Germany is used world-wide within the brewing industry. SafLager W-34/70 allows to brew beers with a good balance of floral and fruity aromas and gives clean flavors and high drinkable beers. Like Fermentis Saflager W-34/70 Bohemian Lage Yeast? Then you will love CellarScience® GERMAN Dry Lager Yeast!
$8.79
-
Replacement Ball Valve for BrewZilla Gen 3 / DigiBoil
Replacement Ball Valve for the Gen 3 BrewZilla / DigiBoil. Silicone washer and stainless nut included, but not pictured. Not compatible with BrewZilla Gen 4. 1/2" MPT 13.5 mm barb (apprx. 1/2") 304 stainless steel construction KegLand Part Number: KL03728
$18.99
-
Stainless Plug - 1/2 in. MPT - Solid
1/2" MNPT Plug. Made from a solid chunk of stainless that has been machined down. Nicer looking finish and hefty feel when compared to most plugs. Uses a 7/8" wrench.
$5.49
-
Fermentation Heating Wrap Belt w/ Velcro Strap
Perfect heating solution for those who want more even coverage and absolute certainty that their PET fermenter will not melt even if the fermenter is empty. Punching in at an ample 30 watts, this heating wrap belt is great when paired with insulation and a temperature controller box to dial in that optimum fermentation profile. 110V plug. Approx. 39" x 9.75" KegLand Part Number: KL26048
$38.49
-
KOMOS® Kegerator | Replacement Gas Cylinder Bracket
We're not here to ask how it happened. We're just here to offer you a replacement gas cylinder bracket if you need it.
$16.49
-
Torpedo Keg | Hand Held Beer Faucet | Cobra Tap | Picnic Tap | 1/4" Barb | Stainless Steel
This handheld draft faucet from Torpedo Keg is made with stainless steel components. A high-quality option compared to standard plastic picnic faucets or cobra taps. 1/4" OD barb.
$16.99
-
Briess CBW® Pale Ale | Concentrated Brewers Wort | Dry Malt Extract | DME | 6 SRM
Pale Ale provides a rich malty flavor with hints of nuts and biscuit Can be used as 100% of your fermentable sugar in extract brewing Add for color correction, boost gravity, or improve head retention in all grain brewing Briess Malt & Ingredients has had a focus on quality and innovation for more than 140 years, with all of their products being made in the U.S.A. Dried Malt Extract (DME) is the primary sugar source in extract brewing and can be used in partial-mash or all grain brewing to adjust flavor, color and gravity of brews. DME can also be used to increase head retention and body. Many brewers choose nutrient rich DME as the sugar source for making yeast starters as well. Briess dried malt extracts are made from 100% malt and water. Pale Ale DME: 100% pure malt barley extract made from 100% Pale Ale Malt and water. Pale Ale is a flavorful and unique DME available from Briess. A rich malty flavor with hints of nuts and biscuit, it can be used in the production of most beer styles, either as a base or to boost gravity. The proprietary malting process creates a malt extract that is not only darker than golden light, but one that is rich and complex. Typical Analysis: Color (8° Plato): 6.0 SRM Fermentability: 75% Solids: 97% 1.043 PPG
$3.99
-
Irish Moss Flakes
Irish moss is a specific type of algae that is used as a thickener in a variety of products. In beer making, Irish moss is added during the last 15 minutes of the boil, to help coagulate and settle out proteins. It improves formation and compaction of the hot-break, the gelatinous mass that forms after boiling and during cooling. Some users recommend prior rehydration in water, or a full hour boil with Irish moss, but common usage is 15 minutes in the boil. Usage: 1 tsp. per 5 gallons Chemical name: Chondrus crispus
$3.79
-
Flaked Oats - Briess Malting
These premier brewing oats from Briess Malting Company are the ideal oats for making that epic Oatmeal Stout. But they are not limited to Oatmeal Stouts, oats will add a silky texture to any beer you make! Experiment and leave us a review of what you used them in and how it came out. Since oats have a higher fat content you should not store therm for an extended period of time. Good rule of thumb is to use them within six months.
$4.09
-
PVC Free Gas Tubing Assembly - Ball Lock Quick Disconnect (QD)
An upgraded version of our popular Gas Tubing Assembly. Our new assembly now includes 5 ft of 5/16" Ultra Barrier Gas™ PVC Free Beer Tubing, ball lock gas-in quick disconnect (barb) and two hose clamps. EJ Beverages' cutting edge Ultra Barrier Gas™ tubing has a number of advantages over regular Vinyl tubing: Clear tubing with red stripe for identification as low pressure gas line PVC Free and BPA Free - containes no DEHP phthalates or other plasticizers Environmentally friendly production - does not emit dioxins Remains flexible at lower temperatures Temperature range of -40 to 125° F Pressure rated up to 60 psi
$16.99
-
Replacement Lid for 12L Plastic Speidel Tank
This is the replacement lid for the 12L Speidel Plastic fermenter. While this is not a piece which should wear out, we've seen these take damage, and eventually need to be replaced. This lid fits our 12L (3.2 gal) Speidel Plastic Fermenters only.
$9.99
-
Columbus | CTZ | Pellet Hops
Columbus, or CTZ (Columbus, Tomahawk, and Zeus), is a high alpha varietal with a neutral bitterness and intense aroma. A true dual-purpose hop that works very well for bittering, but shines just as easily as a late addition. CTZ hops have an earthy, spicy character that is great for bittering. But when used as an aroma addition, you'll find more floral and citrus notes come out that can be very pungent. Columbus is a perfect choice for IPAs, Pales, Imperial Ales, Hazys, Stouts, and Lagers. Hop Statistics: Alpha Acids: 14.0 – 16.0% Beta Acids: 4.0 – 5.5% Alpha-Beta Ratio: 2.55 – 4 Cohumulone: (% of alpha acids): 30 – 35% Total Oils in mls per 100 grams dried: 1.5 – 2.0 Similar Hop Varieties: Chinook, Nugget, Millennium
$1.99 $1.69
-
Stainless Gas Pressure Relief
Gas Manifold - Pressure Relief Valve 1/4" Male Threading Set to blow off at 20 psi.
$10.99
-
15.5 Gallon Sanke Keg | 1/2 bbl | Full-Size Keg | US D-Style Spear | New | Stainless Steel Beer Keg | Certified Commercial Quality
Brand-new stainless steel beer keg with US-standard MicroMatic D System Spear Half Barrel Keg holds 165x 12 oz beers or 124x 16 oz pints Ideal for large-batch brewers where you want to clean and sanitize as few kegs as possible Commercial quality construction—produced and tested in an ISO 9001 Certified facility Supply your brewery with the best kegs on the market with these Full Size 15.5 gallon Half Barrel US Sanke Kegs. Our kegs are produced and tested for quality in an ISO 9001 Certified facility, abiding by strict quality control standards. Each 15.5 gal keg is constructed entirely of Stainless Steel, ensuring a long serving life for your brewery. Holds 165 x 12 oz beers (124 x 16 oz pints). Features: Full Size 15.5 gal (1/2 bbl) US Sanke keg 304 Stainless Steel Construction 23.25" Height, 16.8" Diameter Produced in an ISO 9001 Certified Facility Drop In spears produced by MicroMatic Working pressure is 43.51 psi (3.0bar)
$144.99
-
Stainless Bucket Fermenter w/ Heating - 35L/9.25G (110V)
This top value fermenter is made from 304 grade stainless steel and has an integrated (concealed) 36-watt heating element. No need to worry about accessories such as heating belts and external temperature controllers. This stainless steel fermenter will keep your yeast at optimal temperature making it the ideal option for cold climates. The welding is smooth and the outer body has a sleek brushed stainless finish making it easy to clean and maintain. The base inside this unit is a dome so it's really easy to clean while the rotating rack arm enables you to drain out every last drop. This unit comes standard with silicone tubing to transfer from the ball valve to your bottles or cans. Specifications: Capacity: 35L Brimful Body Material: 304 Stainless steel Outlet Valve Type: Stainless steel, nylon bushings, silicone seal and stainless rotating rack arm. Thread on tap is 1/2" Lid: 304 Stainless steel Display: Digital temperature display Heating: 36 Watt Concealed Element Stopper & airlock included Temperature reads in °F or °C With elements turned off, hold both +/- buttons to switch between °F or °C External Dimensions: 28" H x 15" W (including handles) Internal Dimensions: 22" H x 11.75" W Please note: Heating capacity is highly dependent on ambient temperature and use of insulation. Testing has shown that the Bucket Buddy can heat to 104°F in a room temperature ambient environment without insulation. Adding insulation may increase heating capacity while colder ambient environments may lower heating capacity. KegLand Part Number: KL20695
$199.99
-
Propper Starter™ Canned Wort | Instant Yeast Starter Mix
Propper Starter concentrated wort makes it easy to give your yeast the proper start when preparing high gravity brews, cold-pitched lagers, yeast packs nearing expiration and whenever a starter is recommended. No more measuring messy DME. No more waiting to boil and cool. Just mix one can with an equal amount of purified water in a sanitized flask to produce one liter of ready starter wort. For increasing biomass and vitality in your yeast, Prop It Up™ with a can of Propper Starter! Instructions: Sanitize flask, stir bar, top of can and yeast pack Swirl and open can, then pour contents into flask Add 16 oz of bottled or distilled water to flask Pitch yeast and swirl flask to mix Add stir bar to flask, cover with foil, and mix on stir plate Recommended Use: One can of Propper Starter™ makes a one liter starter. For high gravity beers (1.060 OG or higher) For cold pitching lagers For yeast packs that recommend a starter For yeast packs nearing expiration Ingredients: water, barley malt extract, yeast nutrient Shelf life of 24 months (refrigeration not required).
$4.99
-
Torpedo Keg Ball Lock Quick Disconnect (QD) | Gas In | Stainless Steel | Barbed
Torpedo keg gas in ball lock quick disconnect. Barbed and stainless steel.
$24.99
-
Distilled Hop Oil - El Dorado 1 ML
Distilled hop oil is an amazing new product we are making available to homebrewers. Distilled hop oil varies from other oils in that it is produced from fresh hops, as opposed to dried and processed pellets. Distilled hop oil delivers the same wet hop character that was previously only possible to acquire with the use of freshly harvested hops. The oil is extremely shelf stable, so you can now brew a consistant fresh hop IPA all year long. Extremely volatile, this oil should only be used for aromatic applications; typically applied at bottling/kegging. Distilled hop oil is very potent; add to taste. We recommend using roughly 0.5-1 ml per 5 gallon batch, if replacing 50-100% of a dry hop, added directly to the beer prior to bottling or during kegging. Be careful to not push off the volatile aromatic compounds (disturb the beer as little as possible and reduce oxygen exposure). Most staff members here found that 1ml per 5 gallons was "too hoppy" when replacing 100% of the dry hop. Hop heads (myself included), found that the 1 ml per 5 gallon dosage gave a pungent, fresh, pleasurable and unique hop experience. Tasting these oils is as close to being in Yakima for hop harvest as possible!
$8.49
-
Blichmann Oxygen Flow Regulator
The Oxygen Flow Regulator from Blichmann Engineering™ helps you dial in the EXACT liters per minute of oxygen needed to acheive 8-10 ppm of dissolved oxygen in your wort. Vital to yeast health and the final flavor profile of your beer. Knowing the FLOW is important - other regulators simply regulate pressure and depending on your downstream restriction the actual flow can vary widely. Gone are the days of spray and pray!
$49.49
-
Torpedo Keg Ball Lock Quick Disconnect (QD) | Beverage Out | Stainless Steel | Barbed
Torpedo keg beverage out ball lock quick disconnect. Barbed and stainless steel.
$24.99
-
Tail Piece Gasket
This molded rubber beer line gasket is used anywhere you use a tail piece and nut. Often used on beer taps and/or shanks.
$1.19
-
Taprite D-Style Keg Coupler | Sanke Keg Beer Tap | PRV | Gas Barb Included
Taprite's D-Style beer tap for commercial sanke kegs. Fits most kegs produced in the USA. Made in America by Taprite. This model comes with a pressure relief valve.
$43.99
-
Kettle Tube Screen - Stainless Steel
The Kettle Tube allows you to better filter trub and whole hops from your wort while transferring from your kettle to your fermenter. It is a rugged tube of stainless steel screen 12" in length, 1" in diameter, with a 1/2" MPT fitting at one end, and is our replacement for the discontinued Bazooka Screen. This fitting is intended for use with kettles that have 1/2" FPT threads on the inside of the kettle, or it can be used on the back of any of our line of Weldless Ball Valves. Excellent for straining out leaf hops in the boil kettle (Pellet hops can clog the screen). We also have several customers who use this as a screen in their Cooler Mash Tun! Kegland Part Number: KL03766
$20.99
-
ColorpHast pH Strips - 4.0 - 7.0
Test the pH of your beer or wine with confidence using our colorpHast pH strips. These strips are high-quality and are made not to run, so you are assured of an accurate reading each time. Come in packs of 100 strips.
$49.99
-
Washable Beer Filter Cartridge - 1 Micron
Designed to be used with the KegLand Beer Filtering System. 10" filter cartridge PE reinforced plastic shell for added protection Washable (recommended wash with Sodium Percarbonate) 1 micron
$16.49
-
Hop Sock | Small Grain Bag | 6 in. x 31 in.
Suitable for both hops and steeping grains. We highly recommend using a steeping bag for hops to keep vegetal matter contained in the boil kettle and out of your fermenter. If you use a counterflow chiller or plate chiller for cooling, filtering hops is even more important as these devices can clog if too much hop matter passes through them. The hop sock does not have a drawstring. You will want to tie the end in a knot to keep it closed. Dimensions: 150 mm wide (5.9") 800 mm long (31.4") KegLand Part Number: KL01281
$1.79
-
WilliamsWarn D-Style Sanke Keg Washer
Awesome, simple and cost-effective device for rinsing and sterilizing your D-Type Kegs. No spear removal needed. 3/4" GHT inlet.
$399.99
-
Kelly Bottle Capper
The newest wing capper on the market is the Kelly, made by the Ferrari Group in Italy. We love this capper because it is easy to use, has a smooth capping action, a magnet in the capping head to hold crown caps, and solid metal jaws to firmly grasp the bottle. Sized for standard 26 mm crown caps.
$16.99
-
Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve
This Duotight check valve is a great idea for protecting your regulator. It has a low opening pressure of 1 psi. This check valve is suitable for clean liquids such as water or for gas. Since it cannot be disassembled for cleaning, we do not recommend it for beverage applications. The internal components are made from stainless steel. Compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & water applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C) Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL07047
$4.99
You have seen 192 out of 3014 products