Beer Making

Growlers are incredibly handy beer transportation devices. Great for transporting homebrew to your next party! Or bring to your local brewpub for a refill! Sold individually, in a case of 6 or by the pallet of 84 Cases (504 Growlers Total). Bottle Specifications: Capacity: 64 fl Oz.  Weight: 2.43 lb Height: 10.94 inches Outside Diameter: 4.97 inches Not for pasteurization. For refill use only. Please Note:  Caps are not included. See related products below for options. 

Read more less

Made from 304 stainless steel, the hop tube is ideal for addling larger amounts of hop pellets, flowers or spices to your BrewZilla without blocking the pump. It can also be used in your boil kettle, corny keg, Kegmenter, or FermZilla. The fine mesh will prevent large particles from blocking bev out dip tubes, pumps, or chillers. It will hold approximately 5 oz of hop pellets, allowing for some space to permit full extraction of the hop oils. Ideal for dry hopping in the keg and can also be used for fruits, wood chips, spices and more. The stainless steel chain makes it perfect for use with our Corny Keg Lid With Welded Tab. 2.6" diameter 11.8" tall Made from 304 stainless steel Kegland Part Number: KL05210  

Read more less

Convert a commercial sanke keg to be used with ball lock fittings. To install, remove the keg spear, place the gasket on the keg ferrule with the beaded side facing up, attach the silicone dip tube and place the tapping head on the ferrule, then secure with the 2" tri-clamp. Be sure to always depressurize the keg before removing the tapping head. Includes: Ball Lock Post Lid 2" tri-clamp Single-side beaded tri-clamp gasket 60 cm silicone dip tube (23.6") Red 2.5 bar PRV (36 psi) KegLand Part Number: KL10610  

Read more less

2.5 L - Briess - White Wheat malt has a sweet, malty, bready character and contributes a light straw color. Use as a base malt in any wheat beer style, or add a small amount to any other beer style for improved head retention.  

Read more less

This Duotight fitting with 1/4" Flare is perfect for flared gas ball lock and pin lock disconnects. Can also be used to connect gas line to the flare fitting found on the KOMOS® CO2 Regulator. Compatible with EVABarrier 9.5 mm OD tubing (D1719). Although this fitting would also fit a beverage disconnect, 9.5 mm OD EVABarrier is only recommended for beverage line in long draw draft set ups. Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines! Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL11037

Read more less

Cream soda extract from Gnome Soda. Concentrated flavor extract for making your own sodas. Mix with water and sugar, then either carbonate by bottle conditioning with yeast, or force carbonate in a keg. 2 oz bottle makes 4 gallons 4 oz pack makes 5-10 gallons 1 gallon jug makes 256 gallons

Read more less

Use this soft candi sugar in all of your Belgian beers to impart a wonderfully soft and well-rounded flavor that you have never had in your beers before! A by-product of the rock candi and candi syrup making processes, soft sugar is made up of tiny crystals of beet sugar that have been removed from the syrup by way of a centrifuge. These crystals have a more intense flavor than the traditional sugar rocks American brewers are used to seeing. Use this sugar as a direct replacement for those out-dated rocks! This is the same candi sugar used by the famous Rochefort brewery in Belgium.

Read more less

This Duotight elbow fitting is compatible with EVABarrier 8 mm OD Tubing (D1717 & D1718). Duotight offers superior quality when compared to other push-in fittings. Their double EPDM O-ring design provides a more complete and reliable seal, protecting against leaks even when tubing is bent around tight corners. They are suitable for both beverage and gas applications, and are pressure rated to 100 psi. Tubing can be released by simply pushing in the collet and pulling the line out. No need for clamps or cutting lines!   Features: Insert tubing and firmly push to connect Easily release tubing by pushing in the collet Suitable for both gas & beverage applications Made from food-grade acetal plastic Double O-rings made from highly chemical resistant EPDM Locking teeth made from stainless steel Pressure rated to 150 psi Temperature rated to 212°F (100°C)   Please note: exposure to chlorine will degrade the acetal plastic and stainless steel these fittings are made from. Do not use in contact with bleach or other chlorinated cleaning chemicals. Kegland Part number: KL02400

Read more less

Add a 1.5" TC flange to virtually any vessel! Weldless design Ideal for FTSs and Brew Bucket flat lid pressurized transfers Use with the Pressurized Transfer Fitting FE26 (as shown in pictures) 304 Stainless Construction High heat compatible silicone O-ring Requires TC Clamp and Gasket 42 mm carbide hole saw recommended for installation Please note this product only includes the three pieces displayed in the first photo.

Read more less

6.5 gallon bucket with a hole drilled for a spigot. Spigot is not included. Made of food grade HDPE, lightweight and strong. This bucket has volume markers printed on the side in 1/2 gallon increments, up to 5 gallons. Lids are not included, and sold separately. Compatible with FE350 and FE360. Sold individually, pallet quantity is 120.

Read more less

A speciality yeast selected for wheat beer fermentations. The yeast produces subtle estery and phenol flavour notes typical of wheat beers.

Read more less

Diamond Lager yeast is a true lager strain originating in Germany. Chosen for its robust character, Diamond Lager yeast delivers excellent fermentation performance, and has the ability to  produce clean, authentic lagers. Traditional styles brewed with the Diamond include but are not  limited to Munich Helles, Dortmunder Export, German Pilsner, Bohemian Pilsner, American Pilsner,  Vienna Lager, Oktoberfest/Märzen, Dark American Lager, Munich Dunkel, Schwarzbier, Traditional Bock, Doppelbock, Eisbock and California Common. In Lallemand’s Standard Conditions Wort at 53.6°F Diamond yeast exhibits: Vigorous fermentation that can be completed in 5 days High attenuation and High flocculation Neutral Flavor and Aroma, typical of traditional Lagers The optimal temperature range for Diamond yeast when producing traditional styles is 50 - 59°F   *See the technical data sheet below for information on rehydration, usage and storage.

Read more less

1.7-2.6 °L - Viking Malt -  Made from high quality wheat. Ideal for wheat beers, ales and special lagers. Gives good flavor with low coloring values.

Read more less

Replacement Hardness Reagent #6 Tablets (4484-J) for the Lamotte Water Test Kit (7189-01). 

Read more less

16g threaded CO2 cartridges that work great with the KegLand Core 360 Mini CO2 Regulator or the Duotight Mini CO2 Regulator. Comes in a package of 6 cartridges.   Please note: due to air shipping restrictions, this product is only eligible for ground shipment within the contiguous United States.   

Read more less

An affordable way to keep your FastFerment warm or cool. Wrap the Fast Ferment in an insulating jacket and with frozen 2 liter soda bottles or a heating pad you can keep your fermenter at just the right temperature. Works up to 30 degrees F below room temperature. Also works with the mounting brackets so you can still mount it to your wall.

Read more less

Torpedo keg gas in ball lock quick disconnect. Flared and stainless steel.

Read more less

Replacement Hardness test reagent 5 (15 ml) with a 12 month shelf life Does not include complete BrewLab test kit.   See BrewLab Basic® test kit or BrewLab Plus test kit for additional information.

Read more less

The FastFerment Collection Ball lets you harvest and store your yeast for future batches.  Having an extra ball means you can store yeast from your previous brew, while collecting yeast from your current!  Grab a few of these to keep your favorite strains on hand for fast fermenting anytime!  You will need a FastFerment base unit in order to use this product. Comes with Ball, Union Connection, and stopper.  

Read more less

This is the replacement lid for the 60/120 l Speidel Plastic Fermenters.  While this is not a piece which should wear out, we've seen these take damage, and eventually need to be replaced. Includes the lid and plastic strap.  This lid fits our 60 l (15.9 gal) & 120 l (31.7 gal) Speidel Plastic Fermenters.

Read more less

This therm features a 2" face, 9" long probe, and an adjustable kettle clip that displays the face at a convenient angle for hands-free viewing. 0-220° F range (-15 - 110° C). Calibration screw behind the face for adjusting temperature to a known standard.

Read more less

pH indicator strips in the range of 4.6 - 6.2 pH, the ranges typically seen in brewing. The vial contains 100 strips, and a color reference chart for determining the pH on the outside of the vial.

Read more less

The Ercole capper by Ferarri is the pefect fit If you are a small micro or an obsessed homebrewer who loves great equipment. It is pneumatically driven so you will need to supply an air compressor.  The capper is actuated by pushing both green buttons at once which is a safety feature to keep your fingers out of the way of the capping action. Made in Italy by Ferrari.   Features Caps bottles between 7 to 13 inches tall Two capping heads, one for American standard 26mm and another for European 29-31mm caps. Dimensions: 23"H x 8"W x 9"D Requires 125 psi of air at 1 CFM. Comes with 1/8" ID European style air compressor bayonet.   The new Electric Ercole is now available and does not require a compressor. Simply plug it in and it is ready to go! Check out our B497 here.    

Read more less